Crystal report- Connect from SAP gateway to RFC server failed

Hi All,
I am trying to connect to a SAP R3 system from crystal reports but it gives me below error.
Please note : Transports have been imported and also the roles CRYSTAL_ENTITLEMENT and CRYSTAL_DESIGNER. My user is a member of these roles which were release along with Best practice reports v1.31
Error :
Logon failed.
Details: CMALLC : rc= 27 > Connect from SAP gateway to RFC server failed
Connect_pm GWHOST=10.10.4.63, gwserv=SAPGW30, SYSNR= 30
Location SAP-gateway on host ply.log.com/sapgw30
Error timeout during allocate
TIME ....
Release 700
Component SAP Gateway
Version 2
RC 242
Module gwr3cpic.c
LINE 1996
Detail no connect of TP sapdb30 from host 10.10.4.63 after 20 sec
Can you please help us solving this error.
Thanks
Chetan

Hi Stratos,
The SAP Version is ECC 6.0.
The below transports have been imported.
u2022 Open SQL Connectivity transport (K900574.r21 and R900574.r21)
u2022 Info Set Connectivity transport (K900575.r21 and R900575.r21)
u2022 Row-level Security Definition transport (K900576.r21 and R900576.r21)
u2022 Cluster Definition transport (K900585.r21 and R900585.r21)
u2022 Authentication Helpers transport (K900578.r21 and R900578.r21)
Thanks & Regards,
Chetan

Similar Messages

Connect from SAP gateway to RFC server failed - Java StandAlone app X SAP RAC System

Dears,
I'm developing a Java application (RFC SERVER) with JCo3 and I need to connect to SAP RAC system.
I have configured the TCP/IP connection via transaction SM59, but when I try to start my server I face the error below (dev_jco_rfc.trc):
==========================================================================================
**** Error file opened at 20140714 112024 Brasilia Time Rel 3.0.10 (2013-08-08) [720.440]
Error: >Mon Jul 14 11:20:24,636<    RfcException: [null]
    message: Connect from SAP gateway to RFC server failed
Connection parameters: TYPE=A DEST=VSPAGUE ASHOST=cpe1601 SYSNR=01 SAPROUTER=/H/155.56.49.28 PCS=1
LOCATION    SAP-Gateway on host ld7624.dmzwdf.sap.corp / sapgw01
ERROR       hostname 'cpe1601' unknown
TIME        Mon Jul 14 16:20:25 2014
RELEASE     740
COMPONENT   NI (network interface)
VERSION     40
RC          -2
MODULE      /bas/740_REL/src/base/ni/nixxhl.cpp
LINE        193
DETAIL      NiHLGetNodeAddr: hostname cached as unknown
COUNTER     3
    Return code: RFC_FAILURE(1)
    error group: 102
    key: RFC_ERROR_COMMUNICATION
==========================================================================================
This problem happens when my app executes the line:
JCoServer myServer = JCoServerFactory.getServer(myServerName);
My system properties:
jco.client.lang=EN
jco.destination.peak_limit=10
jco.client.client=800
jco.client.passwd=********
jco.client.user=********
jco.client.sysnr=01
jco.destination.pool_capacity=3
jco.client.ashost=/H/155.56.49.28/H/cpe1601
jco.server.connection_count=3
jco.server.gwhost=/H/155.56.49.28/H/cpe1601
jco.server.progid=VSPAGUE
jco.server.gwserv=sapgw01
jco.server.repository_destination=VSPAGUE
Using SAP Logon i can connect to server cpe1601 system E16 without problems.
Please, I really need some help, because my knowledge on SAP platform is minimum.

Hi Markus,
Changing ASHOST=ld7624.dmzwdf.sap.corp as you have suggested, I got the error message: Connect to SAP gateway failed ...
As you could see, the host I'm connecting is from SAP RAC Service.
Here in our company we have only SAP Logon and my RFC Application, and I can connect to SAP remote system via SAP Logon with this settings:
System Connection Parameters
Description: SAP ECC 6.0
Application Server: cpe1601
Instance Number: 01
System ID: E16
SAProuter String: /H/155.56.49.28/H/
Below the connection information I received from SAP RAC SUPPORT for testing purposes:
    E16 System:
    SID: E16
    Client: 800
    System Number: 01
    Server: cpe1601
    Component Version: SAP ERP Central Component 6.0 Enhancement Pack 6 Suite on HANA
    User: ********
   Password: ********
   SAProuter String:
   If you don't plan to use SAPRouter at your end,
   /H/155.56.49.28/H/

Connect from SAP gateway to RFC server failed

Good day and a happy new year to you all!
I am failing to connect to my SAP BW system from BEx. The logon fails with this message:
>>>>>Start<<<<<<<<<<
Error Group
RFC_ERROR_COMMUNICATION
Message
Connect from SAP gateway to RFC server failed
Connect_PM GWHOST=10.16.64.77, GWSERV=sapgw02, ASHOST=10.16.64.77, SYSNR=02
LOCATION    SAP-Gateway on host bwsys / sapgw02
ERROR       timeout during allocate
TIME        Sat Dec 31 13:16:19 2005
RELEASE     640
COMPONENT   SAP-Gateway
VERSION     2
RC          242
MODULE      gwr3cpic.c
LINE        1785
DETAIL      no connect of TP sapdp02 from host 10.16.64.77 after 22 sec
COUNTER     2
>>>>>>>>>END<<<<<<<<<<<<
I only experience this problem when connecting using any BEx component, but, I can successfully connect to the SAP BW system from SAP gui.
Additionally, I have the service 'sapdp02' defined in the services file, both on the workstation and the server.
What could be wrong or missing in my configuration?
Regards,
Joao.

hi Joao,
check if oss note 447882 relevant
you may ask basis for help
Symptom
You want to access the customer system using the BEx Analyzer.The connenction fails:The system displays the error RFC_ERROR_COMMUNICATION.In the detail screen, the system displays message "Partner not reached" (host 192.168.4.2, service sapgw 00).
Other terms
SAP Gateway, RFC_ERROR_COMMUNICATION, partner not reached
Reason and Prerequisites
The SAP gateway host is deactivated or the TCP/IP port 33xx (where xx corresponds to the system number) is not open.
Solution
Issue statement ping <IP address> (In this example:192.168.4.2) No reply: Boot SAP Gateway host required.
An answer:Check whether the TCP/IP port 33xx is open (where xx corresponds to the system number) and start the SAP gateway.
The TCP/IP port is also partially defined in the services file as an sapgw<SID> or sapgwxx entry (where xx corresponds to the system number). The services file is in the Windows directory or in WinNT/System32/drivers/etc.

Error: Connect from SAP gateway to RFC Server failed

Hi
I am trying to connect SAP server using the java (JCO connection), and getting following error. While I am able to connect to the same sever using SAP Logon pad with the same ipaddress (hostname) and logon credentials.
Please kindly help.
Erro: Connect from SAP gateway to RFC server failed.
Connect_PM GWHOST = hostname, GWSER = sapgw03, ASHOST=hostname, SYSNR=03
LOCATION SAP-Gateway on host hostname / sapgw03
ERROR timeout during allocate
TIME Wed Oct 31 05:31:45 2007
RELEASE 640
COMPONENT SAP-Gateway
VERSION 2
RC 242
MODULE gwr3cpic.c
LINE 1795
DETAIL no connect of TP sapdp03 from host hostname after 22 sec
COUNTER 3

Hi K Patil,
Acording to me you are faceing this issue because the entry of your backend System is not in the SLD (System Landscape Directory ) of your server.
to make this work you have to make entry in the SLD of your server
fort that plesae acess this link.
Re: JCo connection Error
Re: wt is SLD.. how to do configure it
Please Reward Points if Helpfull.
Regards
Vinit
Edited by: Vinit Soni on Dec 19, 2007 7:20 AM

Unable to connect to SAP gateway to RFC server failed(hostname unknow)

Hi All,
I am trying to create a new Model(to connect to SAP R/3 server) using the following steps:
1.Selecting Import Adaptive RFC Model
2.Entering Model name,package,default logical system names
3.Selecting the single server option and giving the details of the SAP R/3 server.
When I try to connect it gives me the following error :
-Connect from SAP gateway to RFC server failed.
Also it mentions :
<b>"ERROR hostname 'sapR3' unknown "</b>
Where <b>sapR3</b> is the entry corresponding to the IP address in the host file.
Further I am able to establish a telnet session using the same hostname in command prompt.
I have searched the Internet for solutions, but I haven't found any yet.Any ideas?
Regards,
Kshitij Agrawal

Hi,
Please check if the hostname that you specify in the "Reimport Model" GUI of NWDS matches with the application server name specified in your R/3 system.The same can be verified by following three simple steps:
1) Open the SAP LogOn.
2) Choose the server to which you wanted to connect and right click on it to get the "properties" in the context menu.
3) Look for the value entered in the field "Application Server" in the properties window.
Hope this helps.

Problem to run the Crystal report inside from SAP B1 based on SQL views.

Hello,
I have a problem to run my Crystal report inside from SAP B1 which is based on SQL views.And the SQL views are stored in a separate database in SQL server.The error which i am getting is saying the the tablename does not exist.What i need to do in order to sort this problem.
Great if somebody can help me to sort out this so that i can run my report based on SQL views stored on separate database other than SAP databases inside from SAP B1.
Edited by: rozenagrawal on Apr 19, 2011 11:51 AM

Try using a SQL synonym in your company database for the views outside the company database. I don't know if SBO will let you get away with it, but its worth a shot.
If your company database is MyCompany and you have a view called MyView in Views database, assuming the view belongs to schema dbo, and you want the synonym to belong to dbo schema in your company database, run this:
Use MyCompany
go
create synonym dbo.OutsiderView for
Views.dbo.MyView
go
select * from OutsiderView
The select statement should return the contents of MyView in the Views database while you are connected to your MyCompany database.
For more info, see the Books Online for MSSQL on topic synonym.
You will need to change your CR options to include displaying synonyms along with tables, views, etc. You may also need to grant select to B1 users.
Edited by: Cindy Lange on Apr 21, 2011 4:00 PM

Remote Connection from SAP to MS-SQL server

Hello Experts,
We have been following 2 options so far and we have come across some issues
The first Option is to call a stored procedure (this is our preferred method) which does the data transfer for us
We have been able to test this scenario successfully from SQL Server side
However, while calling the stored proc via native SQL from ABAP we have come across an issue which is due to SQL 2005 changes (Schema implementation and difference in the security context)
While calling the stored procedure from the ABAP Code we have an error
The program short dumps with runtime error DBIF_DSQL2_SQL_ERROR, exception CX_SY_NATIVE_SQL_ERROR. The database error code is 15274, and the error text is
"Access to the remote server is denied because the current security context is not trusted."
This issue is new after the SQL Server 2005.
We are trying to resolve that.
Secondly we have been trying the DBCON option as well as per OSS Note 323151
We have a few things thatu2019s impacting our scenario:
The remote servers are in a different domain
The remote servers are located in DIZ
Remote server is a named instance
Remote server has been configured with a different port than standard (1565) u2013 All Connection strings will need port in there
The Database name starts with a numeric value
Due a combination of factors as mentioned above the standard approach does not work
Have any of you used this approach while connecting from SAP to MS-SQL server? Do you know of any successful methods to connect to SQL using ABAP (or not) from SAP.
Thanks in advance,

Yes,
DBConnect & UDConnect.
Works like a charm.
We write data into a MS-SQL database via DBConnect & an ABAP program (using open sql).

Diagnostics / Connectivity from virtual appliance to vcenter Server FAILED

Hi,
I'm currently tryining to setup the Support Assistant (VSA) in our vSphere 5.1 environment. Registration to the vCenter was successful after some initial troubles. But when wunning thie VSA Diagnostics it fails at one point:
Connectivity from virtual appliance to vcenter Server FAILED
But on the VSA's console I can connect to the vCenter
- name resoluttion is OK
- vCenter is pingable
- wget https://vcenter.domain.local brings up an error regarding the vCenter's certificate:
ERROR: cannot verify vcenter.domain.local's certificate, issued by `/O=VMware, Inc./OU=vCenterServer_2012.10.22_111554/CN=vcenter.domain.local/emailAddress=[email protected]': Unable to locally verify the issuer's authority.
ERROR: certificate common name `VMware default certificate' doesn't match requested host name `vcenter.domain.local'.
- wget https://vcenter.domain.local --no-check-certificate works. Turns the errors above into warnings but connects and downloads the index.html.
What am I doing wrong? Any help appreciated!

Opened a SR with VMware and they've provided me with an unofficial updated version of the Support Assistant. This one fixed the failing connection to our vCenter. Now diagnostics fails on trying to connect to VMware, its working though. It's confirmed by VMware that this is just a cosmetic issue.

Getting No rights error in Crystal Reports connection with SAP ECC 6

I am ABAP/BI developer and would like to work in Crystal Reports 2011. Currently, We have SAP ECC 6 and BI 7 set up. I have installed trial version of Crystal Reports 2011.
I am getting error while trying to create blank report in Crystal Reports:
Create New Connection -> SAP Tables.. -> entered SAP Development server user id and password -> following error message :
LOGON failed
Details : You do not have necessary rights to design reports against the SAP system. Please check with your system administrator.
My user id has all rights in development server. So, is any special rights require? OR do we have to install any patch for Crystal Reports at SAP level?
Please guide me.

Hi,
To be able to report off an SAP data source in Crystal Reports, request the SAP Administrator to set the appropriate authorizations for the user.
For a list of authorizations that are necessary for each type of SAP connection, consult the document:
BusinessObjects XI Integration for SAP Installation Guide
In the "Authorizations" chapter, there is a description of each authorizations needed for each type of connection and actions.
( The document is attached to this SAP Knowledge Base Article in the attachment section )
In addition to the authorizations specified in the SAP Integration Kit Installation Guide, the following authorizations are required:
For Authorization object: S_RFC with Field name: RFC_Name. According to the installation guide the values should be: SYST, /CRYSTAL/OPENSQL
Additionally you will need the value: SUSR as well.
For Authorization object: ZSEGREPORT with field name: ACTVT. According to the installation guide the value is: 02 (Change)
Additionally you will need the value: 01 (Create or generate) as well.
Thank you.

Problem with starting Crystal Report document from SAP Gui

Dear all,
in Crystal Reports I created my first report (based on a BW query), which is executed successfully, when I run it directly from CR or from Infoview. The report is stored directly in BW and has been published successfulyl to BOE.
If I try to run it native from the SAP Gui, the following steps happen:
Internet Explorer is started with the following link:
http://dtcmbbwp01.ctc.ch.rcc:1080/sap/bw/ce_url?(ce_protcl):(DS)(ce_server)/(ce_path_pr)/viewreport.csp(Q)bw_id=4I4B2HQG8KK2ICFPONVIG5D9Q&sap_sysid=(sysid)&sap_client=010&language=EN&sap-client=010
this link is transcoded to the following:
http://dtcmbbwp01.ctc.ch.rcc:1080/sap/bw/=ce_protcl)%3a//MONHAMBO020.world.mon:8080%2fSAP%2fviewreport.csp(Q&sap_sysid=BWP&sap_client=010&language=EN&sap-client=010&sap-language=EN&cmsname=MONHAMBO020.world.mon
(I already entered /CRYSTAL/CL_BW_HTTP_HANDLER handler in the ce_url service)
and afterwards I get an error 404 -> corresponding service not available
which is obvious, as a service =ce_protcl is not existing at alkl.
If I then execute my CR document again from SAPGui (without closing the IE), the standard BOE login page for the infoview is displayed, but I get an error:
Account information not recognized: The credentials passed to secSAPR3 [] are invalid. Use the following format: sid~clnt/user
I can logon with my BW credentials, and afterwards I can see my CR document.
Any idea, what went wrong?
Thanks,
Andreas

Dear Ingo,
the basic installation of all BOE components was done by the SAP installation service and I checked several times your blog(s) and the corresponding parts on the BOE server and in BW. From my point of view we did all necessary configuration steps on BOE and BW (/CRYSTAL/RPTADMIN) which are necessary to setup the BOE software and the connections.
I checked again the HTTP handler and it still says: /CRYSTAL/CL_BW_HTTP_HANDLER
I stopped and restarted the service, but with no effect at all -> I do not think that I need a restart of the server, right?
My user is as well existing on the BOE server and I can logon to the BOE with my SAP credentials.
I guess as well that the key to the success is the HTTP handler. The first link I provided is the link that is shown in IE, before I logged on to the BW server and I think this is correct, as the transcodification is done after(!) I logged on to the BW server.
A part of the transcodification is as well working, as I can see the replacement of my ce_server, sysid, etc. But it seems to me that the first part of the string is crap:
http://dtcmbbwp01.ctc.ch.rcc:1080/sap/bw/=ce_protcl)%3a
Any further ideas?
Thanks and best regards,
Andreas

SAP Crystal Reports connection to SAP R/3

Hello Everybody,
I install SAP BO Enterprise Edition XI 3.1
SBOP Rich Client Tools XI 3.1
SBOP Integration Tool Kit XI 3.1
Java Connector
Crystal Reports 2011
I configured all the integration and it works fine, i can log on the Infoview with SAP ID.
I work with SAP R/3 4.6C
The problem is when i connect to the R/3, Crystal show me the system that i have in the saplogon.ini, and then i used a user that i have to test, whenn i tried to logon, an error occurs...
Logon failed.
Details: You do not have the necessary rights to design reports against the SAP system. Please check with your system administrator.
And when i used the user sap*
Logon failed.
Details: Name or password is incorrect. Please re-enter.
So... what do i need to pass that rights to my user??? or do i need to do some kind of customizing in the SAP R/3 system???
Thanks!
Edited by: Erick Fernando Nicolas Fernandez on Aug 10, 2011 3:55 AM

There is a specific set of authorizations that you need to provide to your SAP user to be able to create CR reports against SAP data source. Check in the "SAP BusinessObjects Enterprise Integration for SAP Solutions Installation and Administration Guide" chapter 13 called "Authorization".
You can download this guide in the following URL: ht[http://service.sap.com/sapidb/011000358700000559912010E/xi31_sp3_bip_sap_inst_en.pdf|http://service.sap.com/sapidb/011000358700000559912010E/xi31_sp3_bip_sap_inst_en.pdf]
More product guides on ht[http://help.sap.com/businessobject/product_guides/|http://help.sap.com/businessobject/product_guides/]
Hopefully it helps.
Filipe Hartmann

Error in the integrated Crystal Reports viewer from SAP 8.8

Hi, we recently started using the integrated crystal reports from 8.8 and ocasionally the viewer throws the following error:
Consulte el final de este mensaje para obtener más detalles sobre cómo invocar a la depuración
Just-In-Time (JIT) en lugar de a este cuadro de diálogo.
************** Texto de la excepción **************
System.NullReferenceException: Referencia a objeto no establecida como instancia de un objeto.
   en CrystalDecisions.Windows.Forms.PageControl.OnMouseMove(MouseEventArgs e)
   en System.Windows.Forms.Control.WmMouseMove(Message& m)
   en System.Windows.Forms.Control.WndProc(Message& m)
   en System.Windows.Forms.ScrollableControl.WndProc(Message& m)
   en System.Windows.Forms.ContainerControl.WndProc(Message& m)
   en System.Windows.Forms.UserControl.WndProc(Message& m)
   en CrystalDecisions.Windows.Forms.PageControl.WndProc(Message& m)
   en System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   en System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   en System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Ensamblados cargados **************
mscorlib
    Versión del ensamblado: 2.0.0.0
    Versión Win32: 2.0.50727.4206 (VistaSP2GDR.050727-4200)
    Código base: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
B1CRBridge
    Versión del ensamblado: 1.0.0.0
    Versión Win32: 8.80.235
    Código base: file:///C:/Program%20Files%20(x86)/SAP/SAP%20Business%20One/B1CRBridge.DLL
CrystalDecisions.CrystalReports.Engine
    Versión del ensamblado: 12.0.2000.0
    Versión Win32: 12.3.2002.753
    Código base: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.CrystalReports.Engine/12.0.2000.0__692fbea5521e1304/CrystalDecisions.CrystalReports.Engine.dll
System
    Versión del ensamblado: 2.0.0.0
    Versión Win32: 2.0.50727.4205 (VistaSP2GDR.050727-4200)
    Código base: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
CrystalDecisions.Shared
    Versión del ensamblado: 12.0.2000.0
    Versión Win32: 12.3.2002.753
    Código base: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.Shared/12.0.2000.0__692fbea5521e1304/CrystalDecisions.Shared.dll
CrystalDecisions.ReportAppServer.CommLayer
    Versión del ensamblado: 12.0.1100.0
    Versión Win32: 12.3.1102.753
    Código base: file:///C:/Windows/assembly/GAC/CrystalDecisions.ReportAppServer.CommLayer/12.0.1100.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.CommLayer.dll
System.Windows.Forms
    Versión del ensamblado: 2.0.0.0
    Versión Win32: 2.0.50727.4016 (NetFxQFE.050727-4000)
    Código base: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
System.Drawing
    Versión del ensamblado: 2.0.0.0
    Versión Win32: 2.0.50727.4016 (NetFxQFE.050727-4000)
    Código base: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
System.Configuration
    Versión del ensamblado: 2.0.0.0
    Versión Win32: 2.0.50727.4016 (NetFxQFE.050727-4000)
    Código base: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
System.Xml
    Versión del ensamblado: 2.0.0.0
    Versión Win32: 2.0.50727.4016 (NetFxQFE.050727-4000)
    Código base: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
CrystalDecisions.ReportAppServer.ClientDoc
    Versión del ensamblado: 12.0.1100.0
    Versión Win32: 12.3.1102.753
    Código base: file:///C:/Windows/assembly/GAC/CrystalDecisions.ReportAppServer.ClientDoc/12.0.1100.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.ClientDoc.dll
System.Data
    Versión del ensamblado: 2.0.0.0
    Versión Win32: 2.0.50727.4016 (NetFxQFE.050727-4000)
    Código base: file:///C:/Windows/assembly/GAC_32/System.Data/2.0.0.0__b77a5c561934e089/System.Data.dll
CrystalDecisions.ReportAppServer.DataSetConversion
    Versión del ensamblado: 12.0.2000.0
    Versión Win32: 12.3.2002.753
    Código base: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.ReportAppServer.DataSetConversion/12.0.2000.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.DataSetConversion.dll
CrystalDecisions.ReportAppServer.DataDefModel
    Versión del ensamblado: 12.0.1100.0
    Versión Win32: 12.3.1102.753
    Código base: file:///C:/Windows/assembly/GAC/CrystalDecisions.ReportAppServer.DataDefModel/12.0.1100.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.DataDefModel.dll
CrystalDecisions.ReportAppServer.Controllers
    Versión del ensamblado: 12.0.1100.0
    Versión Win32: 12.3.1102.753
    Código base: file:///C:/Windows/assembly/GAC/CrystalDecisions.ReportAppServer.Controllers/12.0.1100.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.Controllers.dll
CrystalDecisions.ReportAppServer.CubeDefModel
    Versión del ensamblado: 12.0.1100.0
    Versión Win32: 12.3.1102.753
    Código base: file:///C:/Windows/assembly/GAC/CrystalDecisions.ReportAppServer.CubeDefModel/12.0.1100.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.CubeDefModel.dll
CrystalDecisions.ReportAppServer.ReportDefModel
    Versión del ensamblado: 12.0.1100.0
    Versión Win32: 12.3.1102.753
    Código base: file:///C:/Windows/assembly/GAC/CrystalDecisions.ReportAppServer.ReportDefModel/12.0.1100.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.ReportDefModel.dll
BusinessObjects.Licensing.KeycodeDecoder
    Versión del ensamblado: 12.0.1100.0
    Versión Win32: 12.3.2.753
    Código base: file:///C:/Windows/assembly/GAC/BusinessObjects.Licensing.KeycodeDecoder/12.0.1100.0__692fbea5521e1304/BusinessObjects.Licensing.KeycodeDecoder.dll
System.Web
    Versión del ensamblado: 2.0.0.0
    Versión Win32: 2.0.50727.4209 (VistaSP2GDR.050727-4200)
    Código base: file:///C:/Windows/assembly/GAC_32/System.Web/2.0.0.0__b03f5f7f11d50a3a/System.Web.dll
CrystalDecisions.Shared.resources
    Versión del ensamblado: 12.0.2000.0
    Versión Win32: 12.3.2002.753
    Código base: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.Shared.resources/12.0.2000.0_es_692fbea5521e1304/CrystalDecisions.Shared.resources.dll
CrystalDecisions.CrystalReports.Engine.resources
    Versión del ensamblado: 12.0.2000.0
    Versión Win32: 12.3.2002.753
    Código base: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.CrystalReports.Engine.resources/12.0.2000.0_es_692fbea5521e1304/CrystalDecisions.CrystalReports.Engine.resources.dll
System.Web.Services
    Versión del ensamblado: 2.0.0.0
    Versión Win32: 2.0.50727.4016 (NetFxQFE.050727-4000)
    Código base: file:///C:/Windows/assembly/GAC_MSIL/System.Web.Services/2.0.0.0__b03f5f7f11d50a3a/System.Web.Services.dll
CrystalDecisions.ReportSource
    Versión del ensamblado: 12.0.2000.0
    Versión Win32: 12.3.2002.753
    Código base: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.ReportSource/12.0.2000.0__692fbea5521e1304/CrystalDecisions.ReportSource.dll
CrystalDecisions.Enterprise.Framework
    Versión del ensamblado: 12.0.1100.0
    Versión Win32: 12.3.2.753
    Código base: file:///C:/Windows/assembly/GAC/CrystalDecisions.Enterprise.Framework/12.0.1100.0__692fbea5521e1304/CrystalDecisions.Enterprise.Framework.dll
CustomMarshalers
    Versión del ensamblado: 2.0.0.0
    Versión Win32: 2.0.50727.4016 (NetFxQFE.050727-4000)
    Código base: file:///C:/Windows/assembly/GAC_32/CustomMarshalers/2.0.0.0__b03f5f7f11d50a3a/CustomMarshalers.dll
CrystalDecisions.ReportAppServer.XmlSerialize
    Versión del ensamblado: 12.0.1100.0
    Versión Win32: 12.3.1102.753
    Código base: file:///C:/Windows/assembly/GAC/CrystalDecisions.ReportAppServer.XmlSerialize/12.0.1100.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.XmlSerialize.dll
mscorlib.resources
    Versión del ensamblado: 2.0.0.0
    Versión Win32: 2.0.50727.4206 (VistaSP2GDR.050727-4200)
    Código base: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
CrystalDecisions.Windows.Forms
    Versión del ensamblado: 12.0.2000.0
    Versión Win32: 12.3.2002.753
    Código base: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.Windows.Forms/12.0.2000.0__692fbea5521e1304/CrystalDecisions.Windows.Forms.dll
CrystalDecisions.Windows.Forms.resources
    Versión del ensamblado: 12.0.2000.0
    Versión Win32: 12.3.2002.753
    Código base: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.Windows.Forms.resources/12.0.2000.0_es_692fbea5521e1304/CrystalDecisions.Windows.Forms.resources.dll
CrystalDecisions.Enterprise.InfoStore
    Versión del ensamblado: 12.0.1100.0
    Versión Win32: 12.3.2.753
    Código base: file:///C:/Windows/assembly/GAC/CrystalDecisions.Enterprise.InfoStore/12.0.1100.0__692fbea5521e1304/CrystalDecisions.Enterprise.InfoStore.dll
CrystalDecisions.Enterprise.Viewing.ReportSource
    Versión del ensamblado: 12.0.1100.0
    Versión Win32: 12.3.1102.753
    Código base: file:///C:/Windows/assembly/GAC/CrystalDecisions.Enterprise.Viewing.ReportSource/12.0.1100.0__692fbea5521e1304/CrystalDecisions.Enterprise.Viewing.ReportSource.dll
CrystalDecisions.Web
    Versión del ensamblado: 12.0.2000.0
    Versión Win32: 12.3.2002.753
    Código base: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.Web/12.0.2000.0__692fbea5521e1304/CrystalDecisions.Web.dll
FlashControlV71
    Versión del ensamblado: 1.0.3187.32366
    Versión Win32: 1.0.3187.32366
    Código base: file:///C:/Windows/assembly/GAC/FlashControlV71/1.0.3187.32366__692fbea5521e1304/FlashControlV71.dll
System.Windows.Forms.resources
    Versión del ensamblado: 2.0.0.0
    Versión Win32: 2.0.50727.4016 (NetFxQFE.050727-4000)
    Código base: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms.resources/2.0.0.0_es_b77a5c561934e089/System.Windows.Forms.resources.dll
************** Depuración JIT **************
Para habilitar la depuración Just In Time (JIT), el archivo de configuración de esta
aplicación o equipo (machine.config) debe tener el
valor jitDebugging establecido en la sección system.windows.forms.
La aplicación también se debe compilar con la depuración
habilitada
Por ejemplo:
<configuration>
    <system.windows.forms jitDebugging="true"></system.windows.forms>
</configuration>
Cuando esté habilitada la depuración JIT, cualquier excepción no controlada
se enviará al depurador JIT registrado en el equipo
en lugar de controlarlo mediante el cuadro de diálogo.
Edited by: Vangelis Sanchoyerto on Dec 23, 2010 10:20 AM

The tag doesnt work? :S

How to Call Crystal Reports XI from Oracle Forms 6i

hi can any one ,Please provide me the steps to call Crystal Reports XI from Oracle Forms 6i
very urgent please
if any Doument,attachment please send to [email protected]
Thanks in advance
Regards
S.Thirumalai selvan

Hi All,
Can anyone send me the steps to call Crystal Reports XI from Oracle Forms 6i (client/server)?
Thanks in advance, Lidija
My email is: [email protected]

Crystal report connects to BW RFC by JAVA

Dear experts,
I want to wirte a JAVA program for exporting our reports as PDF files.
Reports are designed in Crystal Report 2008 and data source is connect to SAP BW via RFC.
I have checked all the sample codes and there is no datasource for SAP RFC, all for database like ORACLE.
How to set a JNDI for connecting to SAP BW?
Could anyone have any idea for this issue?
Thanks a lot.
Edited by: hanmingTW on Apr 3, 2009 3:16 AM

Hello, hanmingTW!
Are you talking about calling RFC functional modules from SAP? If yes you can use POJO-objects as datasource. Attributes of these objects will be fields in report.
Regards, Lev

Failed to retrieve data from the database crystal reports 2008 in SAP B1

Hello friends,
I am using Crystal report 2008 with SAP B1 PL 8.8. When I run any report, it runs correctly from Crystal Report. But whenever I try to open the same report through SAP ( Tools -> Preview External Crystal Report ), it prompts the parameters for that report and then open up the crystal report window and throws an Error message ("failed to retrieve data from the database. Details [Database Vendor Code: 156]").
Please any one suggest me the corrective solution.
Thanks in Advance,
Keyur Raval.

I had the same problem in SAP B1 2007. Report worked fine except when it was open from B1. Generally there may be different problems. In my case the same problem was caused by using some procedure which was in a specific schema. Changing the schema into "dbo" solved the problem.
Radoslaw Blaniarz

Crystal report- Connect from SAP gateway to RFC server failed

Similar Messages

Maybe you are looking for