"has no ifIndex" Errors while failing a IPMP group

Hi,
I have a solaris 10 on x86 server, with a IPMP failover group configured,the Ips are dummys:
[root@vm2:/]# cat /etc/hostname.e1000g2
vm2 netmask + broadcast + group sc_ipmp0 up \
addif 11.0.0.110 deprecated -failover netmask + broadcast + up
[root@vm2:/]# cat /etc/hostname.e1000g3
11.0.0.111 deprecated group sc_ipmp0 -failover standby up
[root@vm2:/]# uname -a
SunOS vm2 5.10 Generic_142910-17 i86pc i386 i86pc
[root@vm2:/]#
e1000g2: flags=9000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,NOFAILOVER> mtu 1500 index 2
     inet 11.0.0.102 netmask ffffff00 broadcast 11.0.0.255
     groupname sc_ipmp0
     ether 8:0:27:1d:69:a9
e1000g2:1: flags=1040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4> mtu 1500 index 2
     inet 11.0.0.105 netmask ffffff00 broadcast 11.0.0.255
e1000g2:2: flags=1040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4> mtu 1500 index 2
     inet 11.0.0.104 netmask ffffff00 broadcast 11.0.0.255
e1000g2:3: flags=9040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER> mtu 1500 index 2
     inet 11.0.0.110 netmask ffffff00 broadcast 11.0.0.255
e1000g3: flags=69040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER,STANDBY,INACTIVE> mtu 1500 index 6
     inet 11.0.0.111 netmask ffffff00 broadcast 11.0.0.255
     groupname sc_ipmp0
     ether 8:0:27:9e:57:93
To test it out I unplug the e1000g2 card, and the IP failover works ok for the logical interfaces, but not for the main ip(11.0.0.102) I get the following messages in dmesg:
Sep 29 15:51:37 vm2 e1000g: [ID 801725 kern.info] NOTICE: pci8086,100e - e1000g[2] : link down
Sep 29 15:51:37 vm2 in.mpathd[269]: [ID 215189 daemon.error] The link has gone down on e1000g2
Sep 29 15:51:37 vm2 in.routed[390]: [ID 238047 daemon.warning] interface e1000g2 to 11.0.0.102 turned off
Sep 29 15:51:37 vm2 in.mpathd[269]: [ID 594170 daemon.error] NIC failure detected on e1000g2 of group sc_ipmp0
Sep 29 15:51:37 vm2 in.mpathd[269]: [ID 832587 daemon.error] Successfully failed over from NIC e1000g2 to NIC e1000g3
Sep 29 15:51:37 vm2 in.routed[390]: [ID 970160 daemon.notice] unable to get interface flags for e1000g2:1: No such device or address
Sep 29 15:51:37 vm2 in.routed[390]: [ID 472501 daemon.notice] e1000g2:1 has no ifIndex: No such device or address
Sep 29 15:51:37 vm2 in.routed[390]: [ID 970160 daemon.notice] unable to get interface flags for e1000g2:2: No such device or address
Sep 29 15:51:37 vm2 in.routed[390]: [ID 472501 daemon.notice] e1000g2:2 has no ifIndex: No such device or address
ifconfig -a output of the failed device:
e1000g2: flags=19000803<UP,BROADCAST,MULTICAST,IPv4,NOFAILOVER,FAILED> mtu 1500 index 2
     inet 11.0.0.102 netmask ffffff00 broadcast 11.0.0.255
     groupname sc_ipmp0
     ether 8:0:27:1d:69:a9
e1000g2:3: flags=19040803<UP,BROADCAST,MULTICAST,DEPRECATED,IPv4,NOFAILOVER,FAILED> mtu 1500 index 2
     inet 11.0.0.110 netmask ffffff00 broadcast 11.0.0.255
e1000g3: flags=29040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER,STANDBY> mtu 1500 index 6
     inet 11.0.0.111 netmask ffffff00 broadcast 11.0.0.255
     groupname sc_ipmp0
     ether 8:0:27:9e:57:93
e1000g3:1: flags=21040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,STANDBY> mtu 1500 index 6
     inet 11.0.0.105 netmask ffffff00 broadcast 11.0.0.255
e1000g3:2: flags=21040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,STANDBY> mtu 1500 index 6
     inet 11.0.0.104 netmask ffffff00 broadcast 11.0.0.255
What i'm doing wrong ?, I thought the 11.0.0.102 IP should failover to the e1000g3 interface also

Ok, sorry I found out it was the -failover parameter in e1000g2, if only I read a bit..
thnx

Similar Messages

Exchange Server Information Store has encountered an error while executing a full-text index query

Hi Team need help
Exchange 2013 EAC doesnt show the databases and it gives message
"Your request couldn't be completed. Please try again in a few minutes."
Its a 9 Node DAG and I stopped and diabled Search and Search Host controller on all of them
in the event viewer see a lot of Event id 1012
Log Name: Application
Source: MSExchangeIS
Date: 4/1/2013 9:23:48 AM
Event ID: 1012
Task Category: General
Level: Error
Keywords: Classic
User: N/A
Computer: ex1301.dagdc.com
Description:
Exchange Server Information Store has encountered an error while executing a full-text index query ("and(or(itemclass:string("IPM.Note*", mode="and"), itemclass:string("IPM.Schedule.Meeting*", mode="and"), itemclass:string("IPM.OCTEL.VOICE*",
mode="and"), itemclass:string("IPM.VOICENOTES*", mode="and")), subject:string("SearchQueryStxProbe*", mode="and"), folderid:string("48A300C7FBA4DA408B80EB019A1CE94900000000000E0000"))"). Error
information: System.TimeoutException: Failed to open a channel.
at Microsoft.Exchange.Search.OperatorSchema.PagingImsFlowExecutor.ExecuteServiceCall(IProcessingEngineChannel& serviceProxy, Action`1 call, Int32 retryCount)
at Microsoft.Exchange.Search.OperatorSchema.PagingImsFlowExecutor.ExecuteSearchFlow(String flowName, Dictionary`2 inputData)
at Microsoft.Exchange.Search.OperatorSchema.PagingImsFlowExecutor.<ExecuteInternal>d__18.MoveNext()
at Microsoft.Exchange.Search.OperatorSchema.PagingImsFlowExecutor.<ExecuteSimple>d__a.MoveNext()
at Microsoft.Exchange.Server.Storage.FullTextIndex.FullTextIndexQuery.ExecutePagedFullTextIndexQuery(Guid databaseGuid, Guid mailboxGuid, Int32 mailboxNumber, String query, CultureInfo culture, Guid correlationId, QueryLoggingContext loggingContext,
PagedQueryResults pagedQueryResults)
at Microsoft.Exchange.Server.Storage.StoreCommonServices.StoreFullTextIndexHelper.ExecuteFullTextIndexQuery(Context context, MailboxState mailboxState, QueryParameters queryParameters, PagedQueryResults pagedQueryResults, ExchangeId searchFolderId,
SearchExecutionDiagnostics diagnostics)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchangeIS" />
<EventID Qualifiers="49156">1012</EventID>
<Level>2</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-04-01T16:23:48.000000000Z" />
<EventRecordID>192599</EventRecordID>
<Channel>Application</Channel>
<Computer>ex1301.dagdc.com</Computer>
<Security />
</System>
<EventData>
<Data>and(or(itemclass:string("IPM.Note*", mode="and"), itemclass:string("IPM.Schedule.Meeting*", mode="and"), itemclass:string("IPM.OCTEL.VOICE*", mode="and"), itemclass:string("IPM.VOICENOTES*",
mode="and")), subject:string("SearchQueryStxProbe*", mode="and"), folderid:string("48A300C7FBA4DA408B80EB019A1CE94900000000000E0000"))</Data>
<Data>System.TimeoutException: Failed to open a channel.
at Microsoft.Exchange.Search.OperatorSchema.PagingImsFlowExecutor.ExecuteServiceCall(IProcessingEngineChannel& serviceProxy, Action`1 call, Int32 retryCount)
at Microsoft.Exchange.Search.OperatorSchema.PagingImsFlowExecutor.ExecuteSearchFlow(String flowName, Dictionary`2 inputData)
at Microsoft.Exchange.Search.OperatorSchema.PagingImsFlowExecutor.<ExecuteInternal>d__18.MoveNext()
at Microsoft.Exchange.Search.OperatorSchema.PagingImsFlowExecutor.<ExecuteSimple>d__a.MoveNext()
at Microsoft.Exchange.Server.Storage.FullTextIndex.FullTextIndexQuery.ExecutePagedFullTextIndexQuery(Guid databaseGuid, Guid mailboxGuid, Int32 mailboxNumber, String query, CultureInfo culture, Guid correlationId, QueryLoggingContext loggingContext,
PagedQueryResults pagedQueryResults)
at Microsoft.Exchange.Server.Storage.StoreCommonServices.StoreFullTextIndexHelper.ExecuteFullTextIndexQuery(Context context, MailboxState mailboxState, QueryParameters queryParameters, PagedQueryResults pagedQueryResults, ExchangeId searchFolderId,
SearchExecutionDiagnostics diagnostics)</Data>
<Binary>5B444941475F4354585D000084000000FF09000000000000000268000000808A00100000000080CA00100000000080B200100000000080D200100000000030FF001000000000309F00100000000030DF001000000000B09D001000000000B0DD001000000000B0ED001000000000B08D001000000000B095001000000000B0A5001000000000</Binary>
</EventData>
</Event>

Hi,
Please reenable and start the search engine service and try again.
The simillar case for your reference:
http://social.technet.microsoft.com/Forums/en-US/exchangesvrgeneral/thread/4f43ef50-b71f-4ab3-8ced-70f1c36c5509
Hope it is hlepful.
Fiona Liao
TechNet Community Support

Error: var g_objCurrentFormData_Error : There has been an error while processing the form

Hi,.
I have a InfoPath 2010 form which was published to SharePoint 2010. I migrated the content db to SQL Server 2012 and I have converted the Sharepoint 2010 (windows based) to the SharePoint 2013 claims based site. I have not fully upgraded the site to
2013 version (Version upgrade to SP 2013) is not done..
In the InfoPath 2010 form, which is available in SP 2013. I have a button and on click of it, i have the below code:
XPathNavigator domNav = MainDataSource.CreateNavigator();
XPathNavigator fldUserurl = domNav.SelectSingleNode("/my:myFields/my:TaskUrl", this.NamespaceManager);
if (!string.IsNullOrEmpty(fldUserurl.Value))
string urlToDecode = HttpUtility.UrlDecode(fldUserurl .Value);
HttpContext.Current.Response.Write("<script type='text/javascript'>window.open('" + urlToDecode + "','_self','left=20,top=20,width=500,height=500,toolbar=1,resizable=0');</script>");
HttpContext.Current.Response.Flush();
HttpContext.Current.Response.End();
The above code works fine in SharePoint 2010, however after moving the Site to SP 2013 Claims mode, I am getting the error as
"var g_objCurrentFormData_Error = [[[12,"There has been an error while processing the form.","","","guid"]],[],0,"","",1033,"","",["0","","","","","",0,0,"",0,false],"","0",false,"",0,"","http:\u002f\u002ftest-t1.com\u002fs\u002fTestApplication","ltr","http:\u002f\u002ftest-t1.com\u002fs\u002fTestApplication",6.35202885373882E+17"
In the SP Logs, i found the below:
Unhandled exception processing request for PostbackPage Microsoft.Office.InfoPath.Server.Util.InfoPathFatalException: Exception of type 'Microsoft.Office.InfoPath.Server.Util.InfoPathFatalException' was thrown.
at Microsoft.Office.InfoPath.Server.Util.GlobalStorage.get_CurrentFormId()
at Microsoft.Office.InfoPath.Server.Util.GlobalStorage.get_CurrentContext()
How to fix this?
Thanks

Hi Venkatzeus,
please let us know your sharepoint 2013 latest cumulative update, if possible please make sure it is March 2013 update or above.
as i know, between 2010 infopath and 2013 there are difference, perhaps if you can debug your form it may help.
most probably there are environment settings difference between 2010 sharepoint and 2013 sharepoint. such as the data connection size/length, that causing it failed, or the form data is NULL.
http://infopathdebugger.codeplex.com/
http://www.infopathdev.com/forums/t/26330.aspx
http://social.technet.microsoft.com/Forums/en-US/5c9d2fce-0fd8-439c-a636-bf856eb76e15/how-to-retrieve-term-store-management-values?forum=sharepointgeneralprevious
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

"The instillation process has encountered an error while installing shared technologies."

Basically, when ever I attempt download Adobe Premiere Elements 11 on my Windows Vista computer, half way through a message pops up saying "The instillation process has encountered an error while installing shared technologies. Please restart your system and try again."
Each time I insert the disc, I select trial version, in case I download the full version and it no longer lets me use my serial code.
Some one said the destination folder couldn't contain more then 250 characters, so I changed its location from 'C:\Program Files\Adobe\' to 'C:\' but it still came up with the same message!
I have downloaded the new Adobe Reader 10, but this makes no difference to the process.. no matter what I've tried it always comes up with the same message.
I also turn of my anti-virus software when installing Adobe Premiere Elements. Still this doesn't do the trick. And I've restarted my computer and tried downloading it and un-downloading it multiple times!
Every time the same message comes up, and I have no idea how to fix it... Its defiantly not my memory that is a problem, as I currently have 50GB free on my OS C:\ drive.
I also have QuickTime version 7.6.9, which is apparently needed?
If you know something I haven't tried that may work, or the problem causing this and a solution to the problem, please can you notify me, Thanks!

Refer to this:
Troubleshoot installation | Photoshop Elements, Premiere Elements | Windows
Mylenium

InfoPath form, rich text fields, "There was a form postback error" InvalidOperationException, There has been an error while processing the form

Using InfoPath 2013 browser enabled form.
I am getting the above error on ALL Infopath Designed Rich Text fields, where the "Cannot be blank" attribute is set.
To reproduce it, I create a custom list and custom list form with InfoPath 2013. I add 2 Rich Text fields and enable "cannot be blank". To raise the error, I put some data in the RT field. Skip to another field (so focus is changed and a postback
occurs), then back to original field to delete the contents (to raise the validation).
I originally thought it was associated with the HTMLCHKR.DLL not being registered (and I have re-registered it just in case), but the exception I get from the ULS logs reads (it is from a list AFTER I have re-registered the DLL):
There was a form postback error. (User: 0#.w|myDomain\jc, Form Name: Template, IP: , Request: h t t p ://MyWebApp/MySite/Lists/rtAfterHtmlCHkrReg/Item/newifs.aspx?List=2212ff41-77b4-445b-931b-d7e538c9da91&Source=h t t p://MyWebApp/MySite/Lists/rtAfterHtmlCHkrReg/AllItems.aspx&RootFolder=&Web=3db49106-bdca-47bb-b4cd-a549d2d86aa7,
Form ID: urn:schemas-microsoft-com:office:infopath:list:-AutoGen-2015-01-16T21:51:48:853Z, Type: InvalidOperationException, Exception Message: No content generated as the result of the operation.) 8cc5e09c-3665-903b-575a-faaac506c40a
I noticed that errors associated with the HTMLCHKR.DLL not being registered would have some sort of COM exception (example: TYPE_E_LIBNOTREGISTERED or REGDB_E_CLASSNOTREG)
I also should mention that this problem started happening about 3 weeks ago. We have extended the web application to handle HTTPS on the intranet zone (we had a reverse proxy project that did not eventuate) - would that cause something? How can I do further
checking?

Hi,
I have done a test in my SharePoint, and I met the same issue with you.
I created a custom list and custom list form with InfoPath 2013. I added 2 Rich Text fields and enabled "cannot be blank". I put some content in the RT field, then delete the contents, I got the error message:"there has been an
error while processing the form."
Here is a similar post said that executing the command: regsvr32 "C:\Program Files\Common Files\Microsoft Shared\
OFFICE14\htmlchkr.dll" will solve the issue.
https://social.msdn.microsoft.com/Forums/en-US/eb2e0f6e-c8e4-4e92-ac5e-a09d72759eda/rich-text-field-error-in-webform?forum=sharepointcustomizationprevious
But I just disabled "cannot be blank", and it solved the issue.
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

Acrobat has encountered an error while playing this media clip

Hi,
I have downloaded a pdf file from the web which has embedded audio in it.
When I try to play the audio, the following message comes up “Acrobat has encountered an error while playing this media clip. Adobe’s Windows build-in player cannot play this format as the required decoder is not installed on the system.”.
I can attach the file, if the problem can be resolved. If you need more information, kindly advise?
Can you kindly assist?

That means it's a PDF containing "legacy media", which requires external software to play it. Unfortunately the audio itself could use any type of encoding, and the error tells you that whatever it is, your default media player (WMP) doesn't understand it. Rather annoyingly, when running in embedded mode WMP doesn't tell you what codec it's having problem with. It's one reason why this feature has been removed from the latest version of Acrobat.
This forum doesn't allow generic file attachments, but if the PDF came from a public website please post the URL and someone will take a look at the structure. Sharing of copyrighted material via file upload services is not permitted.

What do I do now that Photoshop CC has encountered an error while trying to upgrade. Suggesting retry does nothing. The numbers (49) appear, but I don't know what that signifies. Help?

What do I do now that Photoshop CC has encountered an error while trying to upgrade. Suggesting retry does nothing. The numbers (49) appear, but I don’t know what that signifies. Help?
It is recommended that I ask for help, which put me here. What I really need is some customer service — not a chat room!

If Windows :
Quit Creative Cloud desktop application .
Launch Photoshop cc 2014 application from C: > Program Files > Adobe Photoshop CC 2014 .
Once launched , click on Help menu in Photoshop cc 2014 and select Updates option .
It should update.
If Mac:
Quit Creative Cloud desktop application .
Launch Photoshop cc 2014 application from Applications folder:
Once launched , click on Help menu in Photoshop cc 2014 and select Updates option .
Let me know if you face any error .
Error 49 occurs while updating the application , when Creative Cloud app does not have reference / Access to installed CC app, so that it can apply updates for the same .
You can try to update from CC app like Photoshop itself and check.

Solution: The installation process has encountered an error while installing Shared Technologies

I purchased an upgrade to Elements 11 and Premiere 11 for Windows a couple of days ago. When I tried to install, I received the following error message:
"The installation process has encountered an error while installing Shared Technologies. Please restart your system and try again."
There was an invitation to Troubleshoot using a button that downloaded Adobe Support Advisor. No joy, it didn't find any issues.
I restarted and tried to install again. Same error message. The solutions here didn`t help so I started up a chat with Adobe Support.
The TSR asked me to run Set-Up.exe in Adobe Photoshop Elements 11 Install\PSE 11\ElementsSTIInstaller. That returned an error about the path being too long. He had me try some other ideas, none worked.
The TSR then asked to do a remote session. After realizing that it would not work from the install on our server, he copied the PSE11 directory locally. He again ran Set-up.exe from the PSE 11\ElementsSTIInstaller directory. This time it completed!
After that, he ran Setup.exe in the PSE11 directory. This time, the setup completed and I was able to open Elements 11!
Hope this helps someone else who gets this error message!
Best,
John

Welcome to the forum.
Take a look at this thread: http://forums.adobe.com/message/5200642#5200642
That OP found that the problem with their installation was due to Norton running, during the installation, but there are other links, with maybe other solutions.
Good luck,
Hunt

The SkillSoft Course Player has encountered an error while communicating wi

HI Friends ,
I am getting following error while launching a SCORM Course from Learner sel service :
Error ::
===
The SkillSoft Course Player has encountered an error while communicating with the Learning Management System. As a result, your session will now be closed.
=================================================================================================..
Please do let me know how we can resolve this issue ..
Thanks in advance ..
Regards
Vicky

Hi Lee ,
Thanks for your response .
1. yes the courses are scormn courses . I generated PIF files through installer.exe given by the vendor and imported to the LO.and then created offering and class. So when employee lanunches the course for learner self service i am getting this error
2.Even i have done borwser compabilty test.please the below output :
SkillSoft Browser Capabilities Check.
Your browser results have been saved to our server and can be accessed for the next 30 days using this URL.
http://browser.skillport.com/bh/results.asp?resultsid=%7BFE8831C3%2D74EA%2D475D%2DAF1D%2D8B4D70CE609B%7D
User Details.
Your e-mail [email protected]
IP Address 168.187.81.162
Approximate Connection Speed 68,109 kbps
Date and Time of Test 19 Apr 2011 02:08:59
Proxy Via 1.1 webwasher (Webwasher 6.8.7.9396), 1.1 j5k-tec-69 (jaguar/3.0-11)
Combined Technical Specifications (20110114) This test checks compatibility for a combined specification of SkillSoft Course Player, Simulation Player and SkillPort
Test Operating System
Result Pass
Your Computer Microsoft Windows XP
Test Browser Type
Result Pass
Your Computer Internet Explorer
Test Browser Version
Result Pass
Your Computer 7.0
Test Adobe Flash
Result Pass
Your Computer 10.0.22.87
Test Java Environment
Result Pass
Your Computer Sun Microsystems Inc.
Version 6.0 Update 18 (1.6.0_18)
Test PopUp Blocker
Result Pass
Your Computer No PopUp Blocker Detected.
Access a SkillSoft Support Representative in a one to one chat environment using our Live Help.
http://support.skillsoft.com/livehelp/browsertest.asp?resultsid=%7BFE8831C3%2D74EA%2D475D%2DAF1D%2D8B4D70CE609B%7D&customerid=%7B293C989F%2DAA78%2D4D7E%2DA66C%2D0E2BDC6CBC07%7D&[email protected]
The SkillSoft Online Customer Support Portal is a gateway to the latest technical support and how to information. Users can search technical support articles, view a list of FAQs or submit requests to SkillSoft Customer Service Representatives through an intuitive, easy to use Web form.
http://onlinesupport.skillsoft.com
..please do let me know how i can resolve this issue
Regards
Vicky

Fiori Error while creating catalog and Group in Fiori Launchpad

Hi ,
We are getting following error while creating Catalog and Groups in Fiori Launchapd:
Error (500, Internal Server Error) in OData response for GET "/sap/opu/odata/UI2/TRANSPORT/CustomizingRequests?$filter=isDefaultRequest%20eq%20true": HTTP request failed
Details: Model 'ZTRANSPORT_MODEL_0001_BE' contains errors. Contact Adminstrator
Regards,
Trilochan
Message was edited by: Michael Appleby

Hi Trilochan,
Have you assigned transport request? Select the config icon at right top.
Creating Transport Requests for User Changes - User Interface Add-On for SAP NetWeaver - SAP Library
Also look at SAP Fiori - UI Add-on SP09 update troubleshooting
Regards, Masa
SAP Customer Experience Group - CEG

Error while creating the product group by MC84

Hello Friends,
I am creating the product group by MC84, and in product group field i have given the product group name i.e P2345, and its description i.e product group for waluj, plant i.e cw01 and Base unit i.e KG.Now when i press enter system is throwing the error"The field is defined as the required field;it doesnot contain an entry."Message no.MG144.And with this error system is placing the cursor on product group field.As i have already given product group name than also system is throwing the error.
Though i know the alternative method to create product group by MMO1 and selecting the material type PROD, then also i want to know why system is throwing the error while creating the product group by MC84.
Please guide.

Dear,
This message says that you have not entered a mandatory field.Enter proper values for all mandatory fields and then you will not get this error.
Try to create the product group as material of material type"PROD"
Then you go on adding the memebers in SOP Transaction.
In some of the versions of SAP it is the problem.
I have also faced this problem in some versions.
Regards,
R.Brahmankar

Dynamiclinkmediaserver has encountered an error while importing video

I deinstalled everything adobe, ran the cleaner tool, cleaned the registry, trashed preferences... re-installed PhotoshopCC
Still this error pops up everytime I try to import a video, I found posts about it dating from LR4.1 with not a single thread leading to a solution.
SO, how do I fix this anoying issue that prevent me from doing with photoshop what I bought photoshop for (cinemagraph gif).
complete error text is:
dynamiclinkmediaserver has encountered an error
[..\..\Src\DirectoryRegistry.cpp-283]

silverboxmedia wrote:
ANYONE have any fracking suggestions??
I don't know how to fix the problem in a proper fashion, which probably involves tweaking the video subsystem of your computer, since Lr is essentially tapping it for all that is video (assuming the mov files really should be importable, but aren't).
That said, a possible work-around for the mean time is to use a a script called
'Import Any Video'
free by me downloadable here:
http://www.robcole.com/Rob/ProductsAndServices/MiscLrScripts
it transcodes mov files into mp4 format which Lr tends to be happier with - dunno if it'll work for you.
Good luck,
Rob

Error while creating MV replication group object

Hi,
I am getting error while creating replication group object. I tried to create using OEM and SQLPlus
OEM error
This error while creating M.V. rep. group object
There is a table or view named SCOTT.EMP.
It must be dropped before a materialized view can be created.
In SQLPLUS
SQL> CONNECT MVIEWADMIN/MVIEWADMIN@SWEET
Connected.
SQL>
SQL> BEGIN
2 DBMS_REPCAT.CREATE_MVIEW_REPOBJECT (
3 gname => 'SCOTT',
4 sname => 'KARTHIK',
5 oname => 'emp_mv',
6 type => 'SNAPSHOT',
7 min_communication => TRUE);
8 END;
9 /
BEGIN
ERROR at line 1:
ORA-23306: schema KARTHIK does not exist
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 2840
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 773
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 5570
ORA-06512: at "SYS.DBMS_REPCAT_SNA", line 82
ORA-06512: at "SYS.DBMS_REPCAT", line 1332
ORA-06512: at line 2
Please not already I have created KARTHIK schema.

Arthik,
I think I know what may have happened.
As I can see you are trying to create support for an updateable materialized view.
You have to make sure the name of the schema that owns the materialized view is the same as the schema owner of the master table (at master site).
From the code you have shown, I bet the owner of table EMP is SCOTT.
From the other hand, you want to create materialized view EMP_MV under schema KARTHIK that refers to table SCOTT.EMP at master site.
According to the documentation, the schema name used in DBMS_REPCAT.CREATE_MVIEW_REPOBJECT must be same as the schema that owns the master table.
Please check the documentation at the link below
http://download.oracle.com/docs/cd/B19306_01/server.102/b14227/rarrcatpac.htm#i109228
I tried to reproduce your example in my environment, and I got exactly the same error which actually confirms my assumption that the reason for the error is the fact that you tried to create the materialized view in a schema with different name than the one where master table exists.
I'll skip some of the steps that I used to create the replication environment.
I have two databases, DB1.world and DB2.world
On DB2.world I will generate replication support for table EMP which belongs to user SCOTT
SQL> conn scott/*****@DB2.world
Connected.
SQL>create materialized view log on EMP with primary key;
Materialized view log created.
SQL>
SQL>conn repadmin/*****@DB2.world
Connected.
SQL>BEGIN
2       DBMS_REPCAT.CREATE_MASTER_REPGROUP(
3         gname => 'GROUPA',
4         qualifier => '',
5         group_comment => '');
6*   END;
PL/SQL procedure successfully completed.
SQL>BEGIN
2       DBMS_REPCAT.CREATE_MASTER_REPOBJECT(
3         gname => 'GROUPA',
4         type => 'TABLE',
5         oname => 'EMP',
6         sname => 'SCOTT',
7         copy_rows => TRUE,
8         use_existing_object => TRUE);
9*   END;
10 /
PL/SQL procedure successfully completed.
SQL> BEGIN
2       DBMS_REPCAT.GENERATE_REPLICATION_SUPPORT(
3         sname => 'SCOTT',
4         oname => 'EMP',
5         type => 'TABLE',
6         min_communication => TRUE);
7    END;
8 /
PL/SQL procedure successfully completed.
SQL>execute DBMS_REPCAT.RESUME_MASTER_ACTIVITY(gname => 'GROUPA');
PL/SQL procedure successfully completed.
SQL> select status from dba_repgroup;
STATUS
NORMAL                                                                          Now let's create updateable materialized view at DB1. Before that I want to let you know that I created one sample in DB1 user named MYUSER. MVIEWADMIN is Materialized View administrator.
SQL>conn mviewadmin/****@DB1.world
Connected.
SQL>   BEGIN
2       DBMS_REFRESH.MAKE(
3         name => 'MVIEWADMIN.MV_REFRESH_GROUPA',
4         list => '',
5         next_date => SYSDATE,
6         interval => '/*1:Hr*/ sysdate + 1/24',
7         push_deferred_rpc => TRUE,
8         refresh_after_errors => TRUE,
9         parallelism => 1);
10    END;
11 /
PL/SQL procedure successfully completed.
SQL>   BEGIN
3       DBMS_REPCAT.CREATE_SNAPSHOT_REPGROUP(
5         gname => 'GROUPA',
7         master => 'DB2.wolrd',
9         propagation_mode => 'ASYNCHRONOUS');
11    END;
12 /
PL/SQL procedure successfully completed.
SQL>conn myuser/*****@DB1.world
Connected.
SQL>CREATE MATERIALIZED VIEW MYUSER.EMP_MV
2    REFRESH FAST
3    FOR UPDATE
4    AS SELECT EMPNO, ENAME, JOB, MGR, SAL, COMM, DEPTNO, HIREDATE
5*      FROM   [email protected];
Materialized view created.
SQL>conn mviewadmin/******@DB1.world
Connected.
SQL> BEGIN
2       DBMS_REFRESH.ADD(
3         name => 'MVIEWADMIN.MV_REFRESH_GROUPA',
4         list => 'MYUSER.EMP_MV',
5         lax => TRUE);
6    END;
7 /
PL/SQL procedure successfully completed.And now lets run CREATE_MVIEW_REPOBJECT.
SQL>   BEGIN
2       DBMS_REPCAT.CREATE_MVIEW_REPOBJECT(
3         gname => 'GROUPA',
4         sname => 'MYUSER',
5         oname => 'EMP_MV',
6         type => 'SNAPSHOT',
7         min_communication => TRUE);
8    END;
9 /
BEGIN
ERROR at line 1:
ORA-23306: schema MYUSER does not exist
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 2840
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 773
ORA-06512: at "SYS.DBMS_REPCAT_SNA_UTL", line 5570
ORA-06512: at "SYS.DBMS_REPCAT_SNA", line 82
ORA-06512: at "SYS.DBMS_REPCAT", line 1332
ORA-06512: at line 3 I reproduced exactly the same error message.
So the problem is clearly in the schema name that owns the materialized view.
Now lets see if what would happen if I create the MV under schema SCOTT which has the same name as the schema on DB2.world where the master table exists.
SQL>conn scott/****@DB1.world
Connected.
SQL>CREATE MATERIALIZED VIEW SCOTT.EMP_MV
2    REFRESH FAST
3    FOR UPDATE
4    AS SELECT EMPNO, ENAME, JOB, MGR, SAL, COMM, DEPTNO, HIREDATE
5*      FROM   [email protected];
Materialized view created.
SQL>conn mviewadmin/******@DB1.world
Connected.
SQL> BEGIN
2       DBMS_REFRESH.ADD(
3         name => 'MVIEWADMIN.MV_REFRESH_GROUPA',
4         list => 'SCOTT.EMP_MV',
5         lax => TRUE);
6    END;
7 /
PL/SQL procedure successfully completed.And now lets run CREATE_MVIEW_REPOBJECT.
SQL>   BEGIN
2       DBMS_REPCAT.CREATE_MVIEW_REPOBJECT(
3         gname => 'GROUPA',
4         sname => 'SCOTT',
5         oname => 'EMP_MV',
6         type => 'SNAPSHOT',
7         min_communication => TRUE);
8    END;
PL/SQL procedure successfully completed.As you can see everything works fine when the name of the schema owner of the MV at DB1.world is the same as the schema owner of the master table at DB2.world .
-- Mihajlo
Message was edited by:
tekicora

Error While creating a Product Group

Dear All;
When running MRP, we would like to run it for specific materials only.
To do so, we need to group the materials in product groups.
While creating a product Group using T.code MC84, i get an error message
"The field is defined as a required field; it does not contain an entry
Message no. MG144"
Kindly advise me on how to resolve this.
Regards;
Richard.

Hi,
Refer below OSS note:
Note 621753 - MC84: Error message when creating product group & it's related ones.
Regards,
Ram

Error while creating a product group--Batch input error 9

Hi,
While creating a product group in T-code MC84, getting the error message" Product group can not be created (Batch input error 9)". Would appreciate providing yr help to resolve above issue.
Thks,
Nilesh

Hi Neel,
As ponited by you, the material type "PROD" is realted with creation of product group.I am able to resolve the error, "actually the work schedulling & MRP views were not activated for "PROD" resulting in the above error.
Thks for yr help.
Regards,
Nilesh

"has no ifIndex" Errors while failing a IPMP group

Similar Messages

Maybe you are looking for