Has there been any fix to Aiport Express Scanning Issues?

I have my HP printer/scanner hooked in to (by usb) to an airport express. I knew about a year ago that you weren't able to scan with this configuration. Has there been any workaround to this problem?
Thanks..

Has there been any workaround to this problem?
The only workaround remains to connect your printer/scanner directly to your computer.
Since It is HP that must supply the correct sofware drivers for this functionality to work on the AirPorts, you might want to contact HP to ask them about their future plans in this regard.
I suppose that it could not hurt to remind Apple that you would like to see this type of functionality as well.
Apple - AirPort Express - Feedback

Similar Messages

I have a 2005 Jaguar xj8. When I tried to upgrade my 3gs to a 4g I got a ticking noise in the speaker and no one on the other end could hear me. I had to go back to a 3gs. My phone is shot and I need to upgrade. Has there been a fix to the problem?

I have a 2005 Jaguar xj8. When I tried to upgrade my 3gs to a 4g two years ago, I got a ticking noise in the speaker and no one on the other end could hear me. I had to go back to a 3gs. My phone is shot and I need to upgrade. Has there been a fix to the problem? Apple told me there was some sort of interference with the airbag system. Jaguar was totally unhelpful.

Hi Labjock,
Welcome to the Support Communities!
The article below may be able to help you with this.
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
Cheers,
- Judy

Has there been any helpful remedy for the ghost typing issue?

Has there been any helpful remedy for the ghost typing issue? Where the ipad starts typing on its own and screens moving around the screen?
I have had the ipad 1 for a while- and it started about 5 months ago. Anything other than shutting down and leaving alone for hours work?

Yeah, well if you read that whole thread you will see lots of posts identifying it as a hardware problem:
I'm the original poster on this thread. I ended up taking my iPad back to the Apple Store. They ran some diagnostics, and found that my RAM was almost maxed out, which didn't really make sense. It indicated a faulty processor, so they gave me a new iPad. I took it home, synched, and it only took about 45 minutes to synch 30 gigs of data. My original iPad took about 5 hours to synch for the first time. Clearly there was a problem with the processor in the first one, but I didn't realize it at first, as it took several weeks before it started exhibiting the erratic screen behavior. Hope this helps anyone else who might experience this down the line.
-merenvov
So i went to my apple store... which was PACKED. Found a manager and explained my problem. Without any question, they simply replaced it. Awesome!
-duncanwilcox
I have the same problem, and I found out what's wrong, it's not the software - restart, restore and FW upgrade will not help, it's definitely hardware. The best option is to replace your iPad assuming you have an apple store nearby…
-DarkDwarf
Just get your iPad replaced. It has a hardware problem.

Has there been any problems with the mail server?

Has there been any problems with the mail server? I keep getting a notice of server failure.

Unfortunately the error message does not identify the specific server, I (as many folks do) have several, Mac, yahoo, google ect.

Has there been a resolution to the wake up issue created by upgrading to OSX Lion?

Since upgrading to OSX Lion my iMac will not wakeup. Has there been any resolution to this problem?

This is a problem with your computer and system, not with Lion. I suggest you do the following:
Install or Reinstall Lion from Scratch
If possible backup your files to an external drive or second internal drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Install button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.
Because the Lion volume will be erased I recommend you first backup your files so they can be restored after reinstalling Lion.

Encore CS5.1 and DTS sound for BluRay: Has there been any success

I have not updated to the latest version (can't afford at the moment) but I would really like to know if there have been any improvements in the DTS sound file handling.
In CS5 you can NOT create a BluRay disk with dts sound. dtshd (using DTS MasterAudioSuite) are not accepted at all and .cpt files are accepted but can only be used for DVD projects (when trying to create a BD project with .cpt you can an error of file not valid for BluRay).
Has something changed in newer version?
I would be really interested to know about this.
Thanks in advance

Ok, ladies & gentlemen, let's see what's going on here.
First of all I would like to thank my friend George from a London based studio who was kind enough to help me with his professional DTS MA suite encoder
Here is a zipped file which contains two dts .cpt audio files
https://www.yousendit.com/download/MEtUbUpSSU9xRTJ4dnc9PQ
1) The one is star754.cpt
DTS stream tools gives this info in verification
Num Channels = 2
Sample Rate = 48000
Lossy Encode
Samples per frame: 512
Core FSIZE (bytes):     1006
Core Bitrate (kbps):     754
****** End of input bit stream ******
1875 out of 1875 frames verified successfully
Stream passes verification with no errors.
and mediainfo gives this
General
Complete name                    : V:\Temp\star754.cpt
Format                           : DTS
Format/Info                      : Digital Theater Systems
File size                        : 1.80 MiB
Duration                         : 20s 0ms
Overall bit rate                 : 755 Kbps
Audio
Format                           : DTS
Format/Info                      : Digital Theater Systems
Duration                         : 20s 0ms
Bit rate mode                    : Constant
Bit rate                         : 755 Kbps
Channel(s)                       : 2 channels
Channel positions                : Front: L R
Sampling rate                    : 48.0 KHz
Bit depth                        : 16 bits
Compression mode                 : Lossy
Stream size                      : 1.80 MiB (100%)
This file is OK when building blu ray projects. No problem
2) The second file is star1509.cpt
DTS stream tools gives this info in verification
Num Channels = 2
Sample Rate = 48000
Lossy Encode
Samples per frame: 512
Core FSIZE (bytes):     2013
Core Bitrate (kbps):     1509
****** End of input bit stream ******
1875 out of 1875 frames verified successfully
Stream passes verification with no errors.
and mediainfo gives this info
General
Complete name                    : V:\Temp\star1509.cpt
Format                           : DTS
Format/Info                      : Digital Theater Systems
File size                        : 3.60 MiB
Duration                         : 20s 0ms
Overall bit rate                 : 1 510 Kbps
Audio
Format                           : DTS
Format/Info                      : Digital Theater Systems
Duration                         : 20s 0ms
Bit rate mode                    : Constant
Bit rate                         : 1 510 Kbps
Channel(s)                       : 2 channels
Channel positions                : Front: L R
Sampling rate                    : 48.0 KHz
Bit depth                        : 16 bits
Compression mode                 : Lossy
Stream size                      : 3.60 MiB (100%)
This file although it is accepted comes and with the error that it is not BluRay legal. So it is NOT OK

Before I buy has there been any problems with new 27 iMacs?

Before I spend my hard earned cash does anyone know if there has been any problems with new 27 iMacs?

Hello richard from Folsom:
Are you inside or outside? ( I could not resist, I lived in Sactown).
Anyway, advice is frequently worth what you pay for it, and mine is free.
If you want it, buy it. The posts above are right on the mark (except waiting is probably overly-cautious). The best advice (from anamusic) is to buy the extended warranty - well worth the money.
Barry

Has there been a fix for the speakerphone problem?

I recently had to return two N97 handsets due to the fact that the speakerphone on the handsets worked poorly. Contacts I called using speakerphone repeatedly told me I was "breaking up." Speakerphone volume was also mediocre, compared to other N series handsets I have owned. When the problem occured with the second handset I settled on returning the phone and waiting until I knew more about the problem and whether Nokia was aware of it and preparing a fix for it. I no longer own the phone and have gone back to using my trusty and very excellent, but old N958GB.
Can someone/anyone tell me whether this particular bug on this handset has even been identified by Nokia and whether it has been fixed? Is the problem with the speakerphone a software issue or is this a hardware/mic/factory issue? If this is an isolated problem and it was simply a "bad batch" I would be prepared to buy the phone agan, but based on my reading on this forum, this is not a completely isolated problem.
Basically, I'm waiting to find out whether (a) Nokia knows this is a problem, (b) it can be fixed via software upgrade, or (c) this is a design flaw with the handset that's not fixable remotely. Any help users can give would really be greatly appreciated, as I would love to purchase the phone and update my handset at long last.

Hi
Does anyone know anything about this? At least, can anyone who had an update that has improved the phone say whether the update solved that problem, if they were experiencing the problem with the loudpspeaker before?

Has there been a fix for the dreaded kernel_task eating up all CPU problem yet???

Since I bought this pile of garbage in 2011 and went overseas I've been struggling with it. This kernel_task issue is completely insane and a lot of pepole experience it as well, so has Apple released a fix or has anyone figured out a proper way to get rid of it?

I have this same issue on my iMac after an upgrade. My girlfriend's iMac (same model) was unaffected. So the problem seems to affect random machines of all ages and types. I have a solution but not a fun one.
@ScottC75 : The CPU percentage shows what % of an individual core is being used. If you have a multi-core chip (which most Macs do) this can go above 100%
I've read *a lot* of forums on this kernel_task problem with people spouting quite a lot of rubbish.
I first tried everything listed on forums: reinstalling OS X, removing kexts (that apparently stop your computer from overheating), new RAM, tidying up the computer. None of it worked.
One guy said he took three trips to the Apple Store, having his MBP sent off each time; eventually they gave him a brand new MBP of the latest spec. That might be the option for you but I didn't want to be without my computer for that time.
Finally, I did a complete wipe of my Mac. If you boot using the backup partition, or using a USB with an OS X Install on it, the option to 'reinstall' or 'install a new OS X' does not wipe your computer. Once it has finished, you will have all your files and applications still. This did not fix my computer. Instead, you must use Disk Utility first to wipe you Macintosh HD partition and then install. Then you Mac acts like it's brand new. Only this fixed the problem. The massive downside is that I had to backup everything and reinstall all my apps.
This is a drastic measure, and you run the risk of forgetting to backup all the stuff you want. It did work though and was ultimately quicker than going to the Apple Store (even if I might have got a new computer out of it).
In summary, to fix this problem:
1. I backed up all my files onto an external hard drive!
2. I booted up to the recovery screen (Command + R or hold the option key at bootup)
2. In Disk Utility, I 'erased' my 'Macintosh HD' partition
4. Back on the main recovery screen, I chose to (Re)install OS X.

Has there been any updates?

I was wondering if there have been any updates. I have been checking updates through the help menu but haven't seen any. Is it safe to assume this is were you would get them?

Currently Being Moderated
Mar 19, 2012 2:38 PM
FAQ: Will there be updates to the Photoshop CS6 beta before the final product ships?
This question is Assumed Answered.
We do not plan any additional beta releases for Photoshop CS6 before it is announced and ships.

Has there been any problems with a iphone thats been unlocked

I was thinking about getting my iphone 4 unlocked,has anyone had any problems with the phone was unlocked?

What problems are you expecting after your iPhone is unlocked?? Oh no - I am being naïve - I am assuming legitimately unlocked by the carrier to which the phone had been locked?

I-Expenses Module. Has there been any reports created for users to query?

hi all.
Just wondering if anybody has come across any standard i-Expenses reports that have been shipped with related modules that would save us creating some ad-hoc and ORACLE reports. For example, a report that would tell us how many outstanding expense reports that have not yet been approved.
Ive found you can export data from 'Internet Expenses Auditor' but thats just for us Admin types..
thanks
Steven

Thanks for the suggestions.
The reports are to remind users of their Expense Reports rather than them remembering themselves and finding out whats to do with any outstanding ones. I think I'm going to just stick with running SQL queries periodically and emailing the users.
thanks again
Steven

Has there been any word on being able to update to the new drivers yet? gtx 980

Wouldn't mind being able to keep up to date on my gpu drivers but I have that fan issue on anything but .16. Has MSI made any statement or are they just going to ignore it?

Quote from: Nichrome on 02-November-14, 02:18:54
Problem is that their samples of GPUs are most likely from different batch and in fact hell knows what is the actual problem.
If you have an issue with that, please contact MSI:
>>How to contact MSI.<<
I already contacted MSI they wrote me off and gave me a bullshit copy paste answer that had nothing to do with my question. Also this is almost certainly a software issue, and any half decent company would have test units from previous batches especially when the device is only a few months old.

Has anyone found a fix to the HP scan issues?

Any fixes that work?

The the scanning feature of the HP worked fine, until, key word here stay with me now, until Apple updated their software, then the integrated periperal, the scanner that is, no longer functioned as intended.
When Apple updates/upgrades their software and/or hardware it is the responsibility of the 3rd party manufacturers to keep up! Not the other way around.

Has there been any new drivers or patches for kensington trackball expert using mountain lion?

are there new drivers or patches for the kensington trackball expert? i'm using mountain lion on the imac 3.06 ghz intel i3 and it will not recogmize any driver i install. all this after the installation of mountain lion.

Kensington has a new version of Trackball Works 1.1.1 available, try it and see if your problems go away.
It is made for Lion & Mountain Lion.
TrackballWorks for Mac v1.1.1
March 11, 2013
Welcome to version 1.1.1 of TrackballWorks for Mac. This document describes the latest changes.
Compatibility
Mac OS X 10.8 Mountain Lion
Mac OS X 10.7 Lion
Mac OS X 10.6 Snow Leopard
Supported Hardware
SlimBlade™ Trackball (K72327)
Expert Mouse® (K64325)
Orbit™ Wireless Mobile Trackball (K72352)
Orbit™Trackball with Scroll Ring (K72337)
Orbit™ Optical Trackball (K64327)
Installation Instructions
To run the installer, double-click on the DMG file, then double-click on"Kensington TrackballWorks.pkg". Follow the on-screen instructions.
Fixes Issues
Resolves an installation problem with Mountain Lion where TrackballWorks may not install properly with the Mountain Lion default security settings.
Resolves an issue with settings persistence where, after a reboot, some settings become reset to their defaults.
Changes & New Features
Button actions that are dependent on the Mac OS X version now correctly display or hide depending on the version of Mac OS X being used.
Button action "Launchpad" has been added for Mountain Lion.

Has there been any fix to Aiport Express Scanning Issues?

Similar Messages

Maybe you are looking for