Have a solution to publish success

Ok sorry about my english.
I try to publish my project with a Blog and have message all the time Error bla bla bla.
Very fustration because i thing a lot people have a same stupid problem.
Now i can publish perfeclty temporary my project iWeb 8 ,when somebody have result the real stupid the stupid problem.
I publish my project just on the Folder on my desktop and i put manual on my iDisk .Mac "name/Web/Sites/iWeb "it's verry long ?? but work verry good. All link and Blog, videos work very good yesssss. I don't have photos i try the result tonight.
Oh! when you save on your desktop and the end you have a message" Counter, Flash Picture and ???
don't work if you put on your personal server" But i put all on my iDisk .Mac. Well i try again
with counter and picture to look if work.
Good luck everybody.
Michel

Extensive beta testing is done... iTunes requiring the password before restoring an encrypted or password protected backup is not a "bug". It is simply operating as designed.
Did you have the Encryption option selected for backups? If so, enter that password.
There have been extensive postings about the backups requiring a password after the update. I personally did not have an issue. Many users have reported the password being the same as the Admin account on their Mac or PC, the Apple ID password, their email password and various other related passwords.
The device is not unuseable, it can be restored as new and function perfectly fine.

Similar Messages

I have been trying to publish my podcast to iTunes with no success – I keep getting the following error message

I have been trying to publish my podcast to iTunes with no success – I keep getting the following error message
We could not complete your iTunes store request. You do not have enough access privileges for this operation. There was an error in the iTunes store. Please try again later.
New to all this and would really appreciate some help.
Thanks in advance
PS: I should say that I have an ITunes account - I have full permissions over the website etc. I am using Powerpress plug in on a wordpress site.

My guess would be that you've fallen over a glitch in the Store, in which case all you can do is wait a bit and try again, but it is only a guess. Without being able to look at your feed it's not possible to say whether there might be a problem there.

Service not visible in Service Registry but log says published successfully

Hi,
We have configured our PI7.11 system's registry as central registry. We have configured our ECC EHP4 system to publish the service and endpoint.
When we publish it, physical system is published, i can see it but I am not able to see the service or endpoints. Log says
service and endpoints are published successfully.
Please ignore it. When I search the detailed log, it says some config was missing.
Edited by: Praveen Babu on Mar 29, 2010 3:46 PM

Hi Dipankar,
I have already tested the service by the procedure you have mentioned.It is working fine from service browser window.
Is there anything else need to be done to use that service in CAF GP(some configurations etc)?
While creating CO, it is showing the service name and methods for caf.core but not for my Application.
Regards,
Piyush

"Adobe Reader Expected a Dict Object Error." Does Anyone Have a Solution?

With the latest versions of Adobe Acrobat Reader XI and Internet Explorer 11 in Windows 7 Professional 32-bit Service Pack1, we are having issues trying to open a machine manual PDF within the web browser. The web page is hosted locally with an Apache web server. Once we click link to the manual, the PDF attempts to download, but then we are prompted with an Adobe Reader "Expected a dict object. http: // localhost/Help/ait.pdf" information dialog box. The PDF then fails to load. Sometimes however it will load successfully without any issues. The PDF is roughly 34MB in size.
We have tried other web browsers (Chrome, Firefox, and Opera) and they do not appear to have this issue. What could be causing this problem? Does anyone have a solution for this? Please let us know.

Did you ever find the answer to this problem?? I am having the same problem with
my Acrobat 9 Pro document. When trying to insert a page to the document (300 pages long) I get the error message "expected a dict object
Would appreciate any tips you can give me.

IWeb Publish Success - Finally

I have blasted my anger at Apple all over these boards and elsewhere over the debacle that iWeb has been everytime it is updated, and the continuing quality problems with the software. Upload has been a less than "it just works" experience, as indicated by the literally thousands of messages on this board with frustrated users.
This weekend, I fought with this application for hours, attempting on multiple occasions to get a site to upload. Publish All was immediately returning quota errors. I deleted ALL plists in the Domain file, and attempted the upload. No luck. I then resorted to deleting nearly 900 MBytes of content from my iDisk, and doing the upload. The upload ran ALL night, and failed with a network error. I tried again. Same problem. Most everything was uploaded, but something at the end choked the software, resulting in the error.
I then culled about 200 MBytes of stuff off my website - a couple of large client videos, and attempted to republish just the changes. This process ran for nearly six hours, and my data transfer speed to .mac never got above 52K per second. It was grueling, but finally is succeeded. The long transfer time was unbelievable, as the changes involved deleting about 200 MBytes of content, and uploading an additional 20 MBytes or so. The transfer process slowed to a crawl, before finally completing.
I have done several update publishes over the past 24 hours, and have gotten success.
While I am very happy to finally be getting content to publish, I am very uneasy about the stability of the iWeb/.mac combination. I am concerned about the publishing problems which arise everytime an update comes down, and don't have a good feeling about having to delete my entire collection of sites and reupload to fix a combination of software and .mac communication problems.

I am looking for alternatives for iWeb and .mac. The thing is, though, that giving Apple a pass on this because of the low price tag on iWeb is a cop out. .Mac is NOT cheap. Apple's hardware is competitive price-wise, and the software perks of the OS X experience, coupled with the iLife experience are great, but we still pay a premium. I buy Macs and stick with Macs specifically for this level of integration and convenience. Inexpensive should not translate to "works sometimes." This is not what Apple is selling in their ads.
On paper, .mac, iWeb, and other iLife applications are ideal for my workflow. I have the need simply to be able to post video project "proofs" for client review, as well as photo proofs. This is not really heavy lifting so far as web development and hosting is concerned. The pages themselves need not be complex. I just want the ease of being able to click a button and publish, have the client make comments, go back to Final Cut, make a few changes, click and publish again. The main effort of my tasks shouldn't be the web aspect... that is just a tool. My effort should be in the video production and multimedia production aspect. iWeb on paper is ideally suited for this sort of thing - Large video files does not translate into heavy sites - the html is the same regardless. And the fact that Apple gives us up to several gigs of online storage for our subscription with varying levels of bandwidth usage, should not preclude posting large video files.
The inexpensive price tag of iWeb is probably a loss-leader for Apple. This drives subscription sales of .mac, and indeed, drives sales of Macs themselves. This is no excuse for this software NOT working as advertised.

My iPod Nano 6th generation doesn't seem to recognize album artwork. I've downloaded the artwork manually, and I've even restored my iPod to defaults several times, but nothing works. Does anyone have a solution?

My iPod Nano 6th Generation is not picking up album artwork. On several of my tracks, it recognizes the album art, but it doesn't seem to recognize the others. I've tried uploading the artwork onto several albums manually, I've cleared the downloaded artwork to download them again, I've even restored the iPod to its default settings...nothing seems to work.
Does anyone have a solution to this

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on anoterh computer to help determine if you have an iPod or computer problem.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Anyone have a solution to why Illustrator CC crashes on Mac Pro running OS 10.6.8?

Anyone have a solution to why Illustrator CC crashes on Mac Pro running OS 10.6.8?

We recently (yesterday) upgraded our Adobe apps to CC versions. InDesign, Photoshop and Bridge all run perfectly. Illustrator crashes at startup. Tried launching it from Administrator account and it crashes. I have disabled fonts except the bare minimum, no success. If it would launch, then I might be able to narrow it down to an incompatible print driver, but it has to actually be running first. We use no third party plugins with it, so I doubt that is the issue.

I'm TRYING to try the 30 free trial of Aperture. It downloads fine, but the promised email with serial number (needed to activate) never arrives. I've double checked email address. Anyone have a solution?

I'm TRYING to try the 30 free trial of Aperture. It downloads fine, but the promised email with serial number (needed to activate) never arrives. I've double checked email address. Anyone have a solution?

This has been reported numerous times in the past. It seesms that from time-to-time the response system responsible for sending the key goes away.
Take a look at the More Like This box on the right hand side of this page. Some users have had success getting the key sent in various ways.

Indesign CC CS6 is really slow today. Updates have been done. Do you have a solution?

Indesign CC CS6 is really slow today. Updates have been done. Do you have a solution?

Adobe has absolutely acknowledged issues for some users with CC and there are well over 700,000 paid CC subscribers. I suggest you check your facts before posting complete nonsense.
Where has this been acknowledged? If so it is still not fixed.
CS6 sold 14.5 million copies. An advertisement email from Adobe stating: "Join the over 650,000 creative professionals who’ve already made the switch to Creative Cloud* and get everything you need to create, collaborate, and publish all in one place. And with a Creative Cloud membership, you’ll always have the most advanced design features the minute they become available. At the Q2 earnings Adobe stated 770,000 subscribers. Why do the state 120,000 less? Did 120,000 early adopters not continue the subscription?"
That may be more that a few but hardly worth risking having access to the latest new bugs the minute they become available.

1.1 Publishing Success

This is a post that those with a relatively simple site (or sites) may be interested in. I have a simple iWeb site that I've been using to play with the program since its release. It contains just a half dozen pages or so (home, blog, photo gallery, etc.). I read most of the negative comments about publishing with the 1.1 update, and the advice to avoid installing the update, but decided to go ahead with it today (as my entire site is a learning experience for me --- not something I rely upon for my living or something else that is critically important to me).
I made some changes to the site (making some images link to pages, adding some text, etc.). and then published the site again. When asked if I wanted to republish the entire site, as 1.1 would "optimize" it, I agreed. Everything went very smoothly and very quickly (remember that I have only about 6 pages on this site, so YMMV). I emptied Safari's cache and then viewed the new site. Perfect.
No error messages were seen, and there was absolutely no difficulty in (re)publishing the site. I don't doubt that others are having problems, but I wanted to let (at least) those folks who have rather simple sites know that success is possible.
By the way, I have no third-party things (counters, comments, etc.) on my site --- just Apple's iWeb equivalents. For what it's worth, I use Earthlink DSL. I don't know if either of those things are factors in my publishing success; for all I know, they may be completely irrelevant.
Just wanted those visiting this board to know that the publishing failures many are reporting with 1.1 are not universal. I am quite happy with iWeb, and the 1.1 update did indeed make the pages on my site load more quickly.

I also had success with 1.1 (never could get 1.0.1 to work). My site has been republished ... but it did take two tries.
On the first try the upload was almost done when I got an error notice on a particular photo in a photo page. I reloaded the one image into iWeb and published again. Success! Images are now jpegs, text is now selectable and it all loads much faster.
My site has several photo pages, two QT videos and numerous blog entries.
I understand the frustration of those having problems. That was my experience with iWeb 1.0.1 (and if you wonder if Apple folks read these forums: they do. I was contacted by Apple after posting about 1.0.1 problems here, asking if they could check out my site to see what might be going wrong).
One thing I started doing after previous problems was leaving iDisk unmounted while uploading. It made a difference. Comcast recently increased the connection speed here and that may also have helped. Or, maybe Apple really did do something to their servers today!
Another thought: Be sure you've upgraded to the most recent version of OS X (10.4.6). I noticed that Apple recommends it for iWeb 1.1.
Wish I had more advice for those with problems. Hang in there!
iMac G5 Mac OS X (10.4.6) 2gb RAM

Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant. I haven't been able to find any kind of an .inf file to use. Does anyone have a solution?

Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant. I haven't been able to find any kind of an .inf file to use. Does anyone have a solution? Or is Apple's implementation of HDCP (if it's there) incomplete?

I am having this same issue. Im not sure if this is the cause but I think this is keeping PowerDVD Ultra 11 from playing back Bluray under Windows 7 / Bootcamp

I am trying to re-print a portion of a photo enlarged through "poster" and can't get just the one "page" to print. Does anyone have a solution?

I am trying to re-print a portion of a photo enlarged through "poster" in the print dialog box. The original photo printed just fine with the exception of one "page." This is what I'm trying to re-print. I have gone into the Multi- page box clicked on 4 x 4 and then selected the pages I did not want to print. This isn't working as it prints some pages and doesn't print others. All in all it is using a tremendous amount of ink for this project. Additionally I am printing on fabric which involves a deal of time in that preparation. The waste factor is turning into a huge cost. It should just be a simple thing to tell the print dialog box what I want it to do and have it do it. Help, does anyone have a solution?

Hi Pat,
Yes I marked the question as Assumed Answered. I needed to move on. I have never taken part in a forum and couldn’t wait any longer for any input so not wanting anyone to waste the time answering me, I marked the question as assumed answered. I guess this was the wrong thing to do and I apologize to the forum.
I did go another route and loaded and enlarged the photo in Photoshop Elements, Then cropped the photo to the area I needed to reprint. I probably should have done this in the first place!
Again, my apology to the forum for my lack of patience in waiting for a reply.
Diane Harris
Sent from Windows Mail

I cannot view the option to enable itunes match on my iphone 4s, does anyone have a solution for this?

I have an iPhone 4S wi iOS 5.1 installed and I can't view the option to enqble iTunes Match under the Music menu. I have subscribed to the service and it works fine on my iPad. Does anyone have a solution to this? Can anyone enlighten me as to what's going on?
Thanks in advance!

Yes, that's exactly where I was looking, and that option to turn iTunes Match on/off was non-existent, however, I don't know what happened, it just appeared and is working fine.
Thanks!

I recently did a software update, and now all my macbook pro i7 processor does is beep and it wont start up. Does anyone have any solutions?

Just did a software update, and all that my Macbook Pro does is just beep. Does anyone have any solutions?

It was a list of about five updates, but the one that stands out is the Lion OS X complete update - I think.

Ever since the last update, My iTunes continues to quit unexpectedly. It will open for one second and then close. Anyone have a solution for this. Please help.

Ever since the last update, My iTunes continues to quit unexpectedly. It will open for one second and then close. Anyone have a solution for this. Please help.
I've tried my best to troubleshoot. . . opening in safe mode nothing seems to work.
In the problem report, this is the error that stood out:
Crashed Thread: 8 Dispatch queue: com.apple.iad.iadidmanager
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000090

Hi there navicin79,
You may find the troubleshooting steps in the articles below helpful. The first thing I would try is reinstalling iTunes as outlined in the first article.
Troubleshooting iTunes installation on Mac OS X
http://support.apple.com/kb/ht2311
OS X Mavericks: If an app freezes or quits unexpectedly
http://support.apple.com/kb/PH13975
-Griff W.

Have a solution to publish success

Similar Messages

Maybe you are looking for