Service not visible in Service Registry but log says published successfully

Hi,
We have configured our PI7.11 system's registry as central registry. We have configured our ECC EHP4 system to publish the service and endpoint.
When we publish it, physical system is published, i can see it but I am not able to see the service or endpoints. Log says
service and endpoints are published successfully.
Please ignore it. When I search the detailed log, it says some config was missing.
Edited by: Praveen Babu on Mar 29, 2010 3:46 PM

Hi Dipankar,
I have already tested the service by the procedure you have mentioned.It is working fine from service browser window.
Is there anything else need to be done to use that service in CAF GP(some configurations etc)?
While creating CO, it is showing the service name and methods for caf.core but not for my Application.
Regards,
Piyush

Similar Messages

Web service not visible in production

Hi all,
I have developed a web service in development server and it is working properly. When transported to production, it is not visible in service definitions. ( se80 -- enterprise services -- service definitions)
But in production, under repository information system, it is available.
My requirement is how to get this webservice from repository information system in to enterprise services-- service definitions?
Please help me
Thanks & regards,
Murali Krishna .T

Hi Murali,
I hope you looking in Repository browser of SE80 and have chosen the correct package. Jut try to filter based on package and select the correct package used for development of the service.
Regards,
Avishek.

New folder is not visible inside my project but shows in Windows Explorer.

I created a new folder under another folder. The new folder is not visible inside my project but shows in Windows Explorer. Also, if I try to add another folder of that same name, it denies the action since the folder (although invisible) already exists. My co-worker can access the same file (on a share drive) and see the new folder just fine. This error occurs whether I was the one creating the new folder or she is the one creating the new folder. I am new to RoboHelp and she has used it for years. I suspect something is not yet set up right on my side. Ideas? (I thought I posted this yesterday but I can't find it anywhere)

Hi there
What version of RoboHelp are you using?
Did you create the folder from inside RoboHelp or did you create it using Windows Explorer?
Cheers... Rick

Had my Nikon D600 recently in for the updated service call. Camera works fine but Photoshop says it cannot open my RAW (NEF) files now? It worked fine before and I have done all my updates.

Had my Nikon D600 recently in for the updated service call. Camera works fine but Photoshop says it cannot open my RAW (NEF) files now? It worked fine before and I have done all my updates.

The only thing I can think of is if you got a replacement D610 as rumored here:
http://nikonrumors.com/2014/01/27/nikon-is-replacing-some-d600-cameras-with-new-d610-model s.aspx/
In that case, you would need the new version of Camera RAW or DNG converter as per Camera Raw plug-in | Supported cameras .
The other thing to check is if the files open in the Nikon native ViewNX software. If they don't it's time to call the service center.

Tried to update to OS 5.0.1. It crashed my phone and now will not restore. Downloads update but then says server timed out? Help

Tried to update to OS 5.0.1. It crashed my phone and now will not restore. Downloads update but then says server timed out? Help

You are going to have to connect to the computer and restore. http://support.apple.com/kb/HT1808

SQL Server 2012 PowerPivot System Service not visible in Central Administration

Hi all,
I want to test PowerPivot 2012 on the following configuration:
- Windows Server 2008 R2
- Sharepoint 2010 - Enterprise edition
- SQL Server 2008 R2
- PowerPivot for Sharepoint<o:p></o:p>
As such, I downloaded SQL Server 2012 Evaluation and tried to upgrade SQL Server 2008 PowerPivot for Sharepoint instance to SQL Server 2012 PowerPivot
for Sharepoint. It didn't work as it's not possible to upgrade from Enterprise to Evaluation edition without a pid.
Next, I uninstalled the existing SQL Server 2008 PowerPivot for Sharepoint and I installed the SQL Server 2012 PowerPivot for Sharepoint.
I started to configure PowerPivot in Central administration (http://msdn.microsoft.com/en-us/library/ee210609.aspx) , but I got stuck at the 2nd step Create and Configure a PowerPivot
Service Application (http://msdn.microsoft.com/en-us/library/ee210685.aspx) in Central Administration.
The problem is that both SQL Integration Service and SQL Server PowerPivot System service are not visible in Central administration > Manage
services on server; however they are visible and running in Windows Administrative Tools > Services.
Do you think the services are missing in Sharepoint Central Administration because the Sharepoint configuration database is on SQL Server 2008, while the Powerpivot instance is on SQL Server 2012 ?

Thank you for the suggestion.
Meanwhile I have managed to solve the problem. What I've done:
- remove PowerPivot configuration using the Power Configuration Tool
- uninstall PowerPivot
- reinstall PowerPivot
- run PowerPivot Configuration Tool - I still got the parent service error
- remove PowerPivot configuration using the Power Configuration Tool
- run PowerPivot Configuration Tool - this time I received another error regarding the user that runs SQL Server Integration services
- check Sql Server Analysis Service account in Central Administration > Security > Service accountsManage service account - it seems that it was running under Local System account, although in Administrative Tools > Services it appeared to
be run by my domain account
- set a domain account for Sql Server Analysis Service in Central Administration
- run the PowerPivot Configuration Tool - this time it went smoothly.
The following url provides very useful info related to this type of issue: http://whitepages.unlimitedviz.com/2012/09/troubleshooting-and-removing-a-failed-installation-or-upgrade-of-powerpivot-for-sharepoint/

CAF-Application Service not visible in GP

Hi ,
I've created a composite appliocatioon service which contains an entity service and an application service.
After deploying, I also tested it successfully.
Now I want to use this service in callable object in GP.
But I'm not able to see the application service there.
My application is visible there, but next two column(Service name and method name) remains blank.
Wat I've read from tutorials is that only application service can be used in GP.
It is showing service name and method name for caf.core and caf.tc,but not for my application.
Can anybody tell me the reason what is the possible cause for that ?
regards,
Piyush

Hi Dipankar,
I have already tested the service by the procedure you have mentioned.It is working fine from service browser window.
Is there anything else need to be done to use that service in CAF GP(some configurations etc)?
While creating CO, it is showing the service name and methods for caf.core but not for my Application.
Regards,
Piyush

Inventory transfer not visible in service call window

Hi all,
we have booked a service call.
against that we transferred inventory to technicians in three documents out of which only two are visible in service call - expenses tab.
The third document is visible separately in inventory - inventory transactions - inventory transfer.
Now we want to create delivery out of it. How to go ahead ?
if we select unseen items in the delivery will they be deducted twice from the inventory ?
Pls. guide
Thanks
Malhaar

Hi Gordon,
We are able to find out the pain area.
From the back end , we made out that inventory expenses entry was missing in the SCL2 table. and we landed into the conclusion that after punching Inventory Transfer we missed to update the service call window.
thanks
Malhaar.

WD demo application: "Service not available" although service active

Hi everyone
I am new in Web Dynpro and while doing some tutorials I came across WD application DEMO_CONTEXT_PROP (package SWDP_DEMO). I wanted to test it, but I get error page "Service not available" and error code 403 "Forbidden". And if I test the service directly in SICF, I get error message SHTTP009.
The service itself is active in SICF, as well as the mentioned services in SAP note 1088717. And I can run other WD demo applications (such as DEMO_TABLE) without problems. Only this one is giving me problems.
The funny thing is that in SICF there are 2 services called DEMO_CONTEXT_PROP! One is greyed out, the other one is active. But even if I right-click on the one that is greyed out, is still says "active"!?
Any suggestions? Thanks!

Hello Jan,
we had this issue some weaks ago. When upgrading a system to EhP3 SAP delivered a new WebDynpro ICF service which had already been delivered earlier in a support package.
Problem is that the name of the SICF service is not its key. The real key for the service is a generated GUID which is stored in the database. If you create a service and later SAP delivers it or if SAP developed in 2 different release stacks the service may appear dublicated as you have 2 different GUIDs for the service. If the service is there twice the system tries one by chance if you are unlucky it takes the inactive one and you get the 403 error.
Thanls to Ramp Up status we discussed this directly with development. Unfortunately there is no real cleanup / consolidation function yet. The straight forward solution was renaming one of the services. As you only use a Demo Web Dynpro ICF service any of them will work. Perhaps you have to activate the one which is not renamed (you cannot really choose which you rename as the SICF tree is totally confused by the 2 services).
If you have this trouble for a production service you need the SAP to tell you which service (which GUID) is the long term supported and rename the other (perhaps you have to rename, rename the other and then rename the first back). If you do not do this you get the same problem with every Support Package which touches the ICF Services again.
Best Regards
Roman Weise

SQL Server Analysis Services not showing in Services on Server on Central Admin

Hi All
We have a Sharepoint 2013 farm set up (2xApp, 2xWeb, 1xSQL) and we have a number of excel powerpivot workbooks deployed and refreshing.
This was all working fine, until recently when our Excel 2013 Tabular workbooks stopped refreshing manually. This had worked fine in the past, but now is giving the following error:
"An error occurred during an attempt to establish a connection to the external data source"
The first thing I wanted to check was that the "SQL Server Analysis Services" was started in Services on Server within Central Admin. However when i navigated to check this, I noticed that the service was no longer listed at all.
I checked the Analysis services for Powerpivot is running on the server and it is registered within Data Models on Excel services.
There was recently some Windows updates that were applied to the servers, but i'm pretty confident that the refresh was working after these, however i cant rule out 100%.
Hoping for any advice on what I can check/do here?
Thanks!

When i try to run that tool i actually get a strange error (we are running Enterprise Edition):
"PowerPivot for SharePoint 2013 Configuration is missing prerequisites: SharePoint 2013 Enterprise Edition is required.
For more information go to http://go.microsoft.com/fwlink/?LinkId=247828.
Please address the validation failures and try again."
Yes it looks like on the server hosting PowerPivot analysis server that a number of windows updates got applied. However
none look to be specifically about for SQL, and the 2 cumulative ones are for IE and Active X for Windows Server.

Development Component not visible in dev config, but visible in DTR,CBS

Hi,
we have recently migrated our production track from netweaver 2004 to 2004s. In the Dev Config perspective I am unable to see a DC, but I am able to see the same from the DTR perspective. I am also able to see this DC in CBS.
I am unable to create a project or work on this DC because of this problem.
Has anyone else faced the same problem ? What can be done to make the DC visible in the Dev Config ?
Thanks in advance for your help.
Warm regards,
Rashmi

Hi Dao,
Thanks again for your reply.
Here are the findings :
1)The DC is not available in both the active and inactive tabs in the Dev config perspetive.
2) I have only NWDS 7.0 on my machine, but Admin has the older version 6.4 and it was not visible on their machine.
3) I tried Re-Synching the archives, but still no luck, the DC is still invisible.
4)The DC was last modified during the creation of the new track, the activities making changes to the DC before that are mostly UI changes, no deletes etc.. which could cause the DC to not be visible.
5) It is a WD DC.
6) The DC exists in Cons/Dev (both active/inactive) DTR workspaces as well as CBS build spaces (on both versions of the track)
7)There are no pending activities for this DC in the old track.
8)There were couple of broken DCs on the new track but this is mainly because of compile time errors due to use of deprecated methods.
While checking for all these items I noticed that the .dcref file for the DC is missing in the DTR for both active and inactive, could this mean anything ? Is this the reason for the DC not being visible in the Dev Config perspective ?
Is there any way to recover the DC ?
Thanks in advance for your help.
Warm regards,
Rashmi

Custom Portal Service not displayed under Service Configuration

Hi All,
I am working on EP 7.0 SP8.
SAP Portal is not displaying any custom built Portal Services under Service Configuration tab.
I checked with the permission, and I am having the required authorization for my service.
I am not able to find any document on making the custom service available under Service Configutation to start/stop the service.
Please let me know any reference docs on this.
-Thanks,
Pavan

Hi Pavan,
> working on EP 7.0 SP8
Glad to hear that you are not stuck on EP5 No, really, that is older than old... Anyhow:
> not displaying any custom built Portal Services under Service Configuration tab
There services are only listed if they are configurable, i.e. if they have a service profile with at least one property (compare http://help.sap.com/saphelp_nw70ehp2/helpdata/en/df/e6b74253ffda11e10000000a155106/frameset.htm). Otherwise it makes less sense to restart a service (normally this is done after changing a service profile parameter).
Hope it helps
Detlev

Oracle Services not seen in Service Panel

I am runnig an Oracle 9 database on Windows NT server.
For some reason the Oracle Services that was seen in the Services Window of the Control Panel disappeared.I could see the regedit is safe and the Database is running.How do I get the services to appear on the service window.

Please maintain service conditions through Txn ML33.

Safari 4 NOT VISIBLE - can't locate - but can't go back to 3.2.1

Two days ago I had the Safari 4-beat for TIGER working fine. I did some TERMINAL commands to get the tabs on bottom and have the blue bar show when loading addresses.
Today I've upgraded over the past hours with a full LEOPARD 10.5.6 on my MacBook (May 2006 - original core duo). Everything doing fine EXCEPT SAFARI-4 beta. It says it installs but it is nowhere to be seen; can't be found even with a search by "EasyFind".
So I want to use the UNINSTALLER to go back to 3.2.1 - but it says that there is no 3.2.1 version to install; so I am either running FireFox browser or this 3.2.1 version from a back-up Leopard hard drive.
Kinda a MESS. Any suggestions on how to get Safari-4 Beta to be seen - or at least to be able to have Safari 3.2.1 Leopard on my HD?
Regards,
Steve
Saturday 28 February 2009

SOLVED if any of you has this strange occurance...
When I was running TIGER I upgraded from Safari 3.2.1 to the new Safari 4-beta. Worked great in Tiger!
Then 48 hours later, I'm installing Leopard over Tiger (i.e. standard install, not NEW and not ARCHIVE). OK but now the Safari on my HD is the TIGER 4 BETA. When I then load the SAFARI 4 BETA over this; forget it. It's there, but not there--
So one has to have a copy of Safari for Leopard 3.2.1 to copy to the Applications folder - then best do a restart then install the LEOPARD 4 BETA and it sees the Leopard 3.2.1 and overwrites it and all is fine.
Just one more reason to have lots of backups - and glad I pre-installed LEOPARD on a LaCie external HD 2 weeks earlier and kept it!
Steve
Saturday 28 February 2009

Process Chain - Status Green but log says "Termination of chain "

Hello Friends,
One of the Steps in a Sub Chain of the Meta Chain shows the log as follows:
30.10.2009 05:20:28 Job started
30.10.2009 05:20:28 Step 001 started (program RSPROCESS, variant &0000000049485, user ID SCMREMOTE)
30.10.2009 05:20:35 Spool request (number 0000017553) created without immediate output
30.10.2009 05:20:35 Entire chain now has status 'G'
30.10.2009 05:20:35 Termination of chain has been reported to meta chain D6SBR9M64EV91ZX911UJI7K36
30.10.2009 05:20:35 Job finished
and the Step has changed to Green. So we normally assume that it has executed succesfully. Recently, there came this data issue. This step loads Open Sales Order data from a Cube to APO DP Planning area. Now few Open Sales Order Qty for a material are missing in planning area.
Does this step in the Process chain has executed Succefully or as the log says is it terminated? Though the step changes to green , were all the materials not loaded into planning area?
Please advice and suggest.
Thanks,
Chandra.

Hii
This log shows that chain has been successfully terminated. This is a common log
The missing of Open Sales Order Qty for a material may be due to other reason .
Try to get into more details for which Orders this has happened and check in the source system.
Thanks
Sonal...

Service not visible in Service Registry but log says published successfully

Similar Messages

Maybe you are looking for