Have the IP profile threshholds been changed?
Always used to be a case that the IP profile for your line (on 21cn) used to be a whole number. E.G 13meg, 14meg, 15meg etc Very annoying if you were at the top of a threshold where an extra 2kb would take you upto the next IP profile.
E.G, before the resync (last done a month ago when SNR was low) was 16,995, silly when you think an extra 30kb sync would have given me an extra 1meg max throughout:
14752 kbps 15903 kbps 13 Mbps
15904 kbps 17023 kbps 14 Mbps
17024 kbps 18175 kbps 15 Mbps
18176 kbps 19295 kbps 16 Mbps
I resynced today to get a sync of 17,555 and instead of been given an IP profile of 15000, have been given 15,461!
Have finally realised the old system seemed unfair?!
Bt speedtester is not a problem...
My post does not mention that my throughput has exceeded the IP profile...
Even if the 15.5meg Ip profile is displayed incorrectly on speedtester, the increase can still be verified by several other speedtester websites.
Since the Ip profile increase, throughput speed has gone from 14.62 to 15.07
Download speeds from 1.8 to approx 1.9 meg/sec.
So the original question is still unanswered...
Have BT changed the IP profile thresholds from being 1meg apart to 500k
Here is a screeny, im sure you will agree that the speed increase would compliment the 500k profile increase...
Similar Messages
-
Hello, I have been exporting my photos with a watermark. Without changing any settings, half way through my day things changed, and now about 1 out of 7 photos have the watermark after export. Change you help me change this back please? Has anyone had this issue before?
I'm sorry to learn that you have endured the audio issues outlined in your post for almost 2 years SusanLM1! This is certainly not normal! Let's get to the bottom of this issue, first please confirm your phone model; your mention that you have the iPhone 5 but your post is on the iPhone 5S forum. Also, share the iOS version currently installed on your phone. What is your ZIP code? Does this happen mainly while you make/receive calls from a particular location (home, office, etc)?
AntonioC_VZW Follow us on Twitter at www.twitter.com/VZWSupport -
Has anyone with the ECPD Profile error been able to order successfully yet?
Has anyone with the ECPD Profile error been able to order successfully yet?
If the error is in fact due to the employee discount Verizon dropped the ball here big time. I never was able to get past the ECPD error when upgrading my device tried for90minutes. I did the new customer and it went through without a hitch but i would have to change my phone number....not good!! Decided to give it one last shot on Apple Store App and was able to have the iPhone 6 Plus silver 16GB reserved...got a reservation number since they were having issues connecting to verizon. So happy!! Been month to month over 2 years waiting on the 6!!! If you don't care to change your number go as a new customer or use apple store app. Good luck and good night!
Verizon this is no way to treat your existing customers!! -
Can you track a form if the file name has been changed after distribution?
I created a form in Adobe Acrobat X Pro -- I then used the distribute feature and sent the form to myself using the internal server. After testing the form, and making sure all was good, I copied the attachment from the email I received when I distributed the form to myself, and sent it to my boss (via outlook). He then changed the file name, and sent the form out to our members. Our members are completing this newly-changed document instead of the original form. They are able to "Submit The Form", and it still looks as though its coming back to me via the dialogue box. However, I have no received any responses in my original document's tracking. When I tried submitting this new form myself to see what happened, I just received an message that says "Your response is being queued for submission", but it never tells you whether the form was actually submitted or not. Is there any way that you can track this form even though the file name has been changed? And if people are submitting their forms to me, where are they going?
Please help!
thanks,
desireeI understand that you don't want to redo all the linking with the markers. You can try following (make a copy of your project first to be safe) :
- close your project and quit DVDSP
- move your old asset, and replace it with the new one
- reopen your project
A warning message should tell you that this asset has changed, but your marker will remain at old position. If the asset length are not the same, old length information will be used by DVDSP. To correct this, delete the asset from the timeline, and drop it back to the timeline.
Now you just have to move the marker to the right position. -
Why can I no longer install iTunes updates on my computer? I keep getting messages saying it fails, and to do it manually, but then I get popups questioning whether I have the authority to make these changes. And it never updates.
Make sure you are running as the Administrator of the Account.
Also... See this User Tip by turingtest2
Troubleshooting issues with iTunes for Windows updates -
i can't access itunes store on my phone. It says I have the wrong password. I changed the password on my mac computer.
try sign out & sign back in again. your password must be same as on your mac
-
[svn] 4443: The direction property has been changed to gridDirection.
Revision: 4443
Author: [email protected]
Date: 2009-01-08 10:53:00 -0800 (Thu, 08 Jan 2009)
Log Message:
The direction property has been changed to gridDirection. Here is the update for the sample.
Added Paths:
flex/sdk/trunk/samples/explorer/charts/GridLinesExample.mxmlRevision: 4443
Author: [email protected]
Date: 2009-01-08 10:53:00 -0800 (Thu, 08 Jan 2009)
Log Message:
The direction property has been changed to gridDirection. Here is the update for the sample.
Added Paths:
flex/sdk/trunk/samples/explorer/charts/GridLinesExample.mxml -
I want to use the old version of FF from my previous pc. I saved the profile folder etc on the old pc. The old HD is attached to the new pc via USB. How do I tell what version the old one was?
After installing the old version on the new pc I want to use the former FF profile file on the new pc installation of FF.
I have the sessionstore backups etc. from 3/21.
BTW I typed all this info earlier and support automatically butted in with a guess to what would be an answer. And in the process overwrote what I typed. Please try to get mozilla to prohibit this behavior.Sorry to hear that the forum lost your question.
I'm not sure I understand why you need an old version of Firefox. Were you way behind in updates? Normally when you install the current version, it will seamlessly update/convert any obsolete files in your profile folder to current versions.
Perhaps I'm answering the wrong question. If the question is: "how do I get a new installation of Firefox to use all my old settings" then I can give you a way to do that.
''This assumes you might have data in your new Firefox that you don't want to overwrite and preserves your current profile.''
Go ahead and open your old profile folder in a Windows Explorer folder. At this level you should see a bookmarkbackups folder, among others. Later you'll copy the ''entire contents'' of the old profile folder to a new location on your C drive.
'''Overview'''
These are the steps:
# Create a new Firefox profile
# Remove everything from that new profile folder
# Copy in everything from the old profile folder
'''Create a new Firefox profile (Windows)'''
Exit Firefox and start up in the Profile Manager by pasting the following into the Start menu search box (or Run dialog) and pressing Enter:
firefox.exe -P
''Do not delete anything here! Any time you want to switch profiles, exit Firefox and return to this dialog.''
Click the Create Profile button, assign a name like OldSettings, and skip the option to change the folder location. Then select that new profile in the dialog and start Firefox.
'''Open the New Profile folder in Windows Explorer'''
Firefox in the new profile should look like a factory fresh installation. Open the Troubleshooting Information page using either:
* "3-bar" menu button > "?" button > Troubleshooting Information
* Help menu > Troubleshooting Information
* type or paste about:support in the address bar and press Enter
In the first table, click the "Show Folder" button. Firefox will launch your brand new profile folder in Windows Explorer.
Leaving that folder open, switch back to Firefox, and Exit. Either:
* "3-bar" menu button > "power" button
* (menu bar) File > Exit
When Firefox closes, the profile folder should be front and center, or you can activate it using the Task bar.
'''Copy Old Data in Place of New'''
In that new profile folder, select all the contents and delete.
Leaving that window open, switch over to your old profile folder. At this level you should see a file named places.sqlite. If that isn't visible, try moving up a level until you find it.
Select everything (Ctrl+a) and Copy (either right-click > Copy or Ctrl+c).
Switch to the empty new profile folder in other window and Paste (either right-click > Paste or Ctrl+v). This may take a minute since some of the files are large.
'''Start Firefox'''
Firefox should start up in that new profile with the resurrected old profile data. Success? -
This morning my iPhone was stolen from me, I immediately called it and it had been turned off. So, I went right home to activate the Find My iPhone app on the website so it would call my other contact number. Then going to my AT&T store I was told to go home and submit an insurance claim. Later this evening, I tried to access my iCloud account and I couldn't. Finally, I found an series of emails from Apple at 5:15pm and on verifying my Find My iPhone activation had been disabled and that my iCloud ID had been changed to *********. I don't know who the heck this person is, but they've managed to deactivate the Find feature and hack my iCloud ID email address. How can this happen? How do I get Apple and Gmail to prosecute this person? I still don't know the full extent of what has been hacked into. Does anyone have any helpful insight? Thanks
<E-mail Edited by Host>In terms of your account the best thing to do would be to change the password.
Also just letting you know that you aren't talking to Apple, the people here are Apple product users like yourself. If you wish to speak with Apple follow the link below and call the number for your country:
Contacting Apple for support and service
Hope this helps -
Have the clamshell mode requirements been relaxed?
I'm experiencing what I consider to be some odd behaviour regarding an external display hooked up to my MacBook:
With the external display being the only peripheral connected, the MacBook will enter clamshell mode when I close the lid.
It was my understanding (supported by documentation) that clamshell mode required output and input (a display and a keyboard and mouse; be they wired or bluetooth).
How can it make sense for a laptop to enter clamshell mode with only an external display connected?
When I close the lid with the external display connected:
the external display becomes the main display
all the windows that were open on the lid display pop across to the external
my desktop spread, littered with icons, appears on the external
the MacBook does not enter sleep
I don't have a bluetooth keyboard or mouse connected; I don't even have bluetooth on.
To the best of my knowledge I'm unaware of any settings that would affect this behaviour.
Does anyone else experience this same behaviour?
Have the clamshell mode entry requirements been relaxed in Mavericks (admittedly, I haven't used clamshell mode in previous versions)?
Is this a feature or a bug?Reading comprehension is not your strong suit. Those notes are not under the heading "Opening the internal display while in closed clamshell mode."
Here, I've copied more for you. Opening the internal display is discussed much later in the article......MUCH later.
Requirements for closed display mode:
Power adapter
External keyboard, mouse, or trackpad
External display
Use these steps to enable closed clamshell (display closed) mode:
If you are using a wired keyboard and mouse:
Make sure the computer is plugged in to an outlet using the AC power adapter.
Connect a USB keyboard and mouse to your computer.
With the computer turned on connect the Mac notebook (using the appropriate Apple adapter if necessary) to the appropriate port on the external display or projector and turn the display or projector on.
After your computer's Desktop appears on the external display, close the computer's lid.
When you close the lid:
In OS X Lion and later, the external display will change to a blue screen, then will show your desktop.
In Mac OS X v10.6.8 and earlier, wake the computer up by clicking the mouse button or by pressing a key on your external keyboard.
You should now be able to use your Mac notebook as you normally would, with a USB keyboard and mouse.
If you are using a Bluetooth keyboard and mouse on a Bluetooth enabled Mac notebook:
Make sure the computer is plugged in to an outlet using the AC power adapter.
Verify that Bluetooth is turned on by using the Bluetooth pane of System Preferences or the Bluetooth menu icon.
Pair your Bluetooth keyboard or mouse with the computer. For step-by-step instructions, see this article for keyboard pairing or see this article for mouse pairing.
In System Preferences, be sure that the Allow Bluetooth devices to wake this computer option is selected.
With the computer turned on connect the Mac notebook (using the appropriate Apple adapter if necessary) to the appropriate port on the external display or projector and turn the display or projector on.
After your computer's Desktop appears on the external display, close the computer's lid.
When you close the lid:
In OS X Lion and later, the external display will change to a blue screen, then will show your desktop.
In Mac OS X v10.6.8 and earlier, wake the computer up by clicking the mouse button or by pressing a key on your external keyboard. -
ITunes won't run on W7 - The colour scheme has been changed
I have been installing and uninstalling iTunes for sometime now and have even tried to change the theme but I keep getting the same message.
I've gone back 14 pages on this part of the forum and haven't come across a similar thread so apologies if anyone has already asked and if you can point me in the correct direction.
I have an iPod and iPhone that need to be updated as I've had this problem for around 6 months now since getting a new laptop.
The hardware is a Packard Bell 64bit running Windows7Hi everyone,
I have almost the same problem meaning the color scheme in W7 has changed when ..... in my case, safari starts.... it seems that is one effect from many causes, well I dug a bit arround and came across the folowing :
Why are some visual elements being automatically turned off?
If you receive a message that some visual elements, such as window frame transparency, have been turned off, or if you receive a message that the theme has been changed to the Basic theme, one of the following might have happened:
A program that you're running is incompatible with Aero themes. When this happens, some visual elements are automatically turned off. When the program is no longer running, the visual elements that were turned off are turned on again automatically.
Your laptop might be running low on battery power. Windows might turn off Aero themes or window transparency to save battery power.
Your computer's hardware configuration or screen resolution was changed. If you changed your screen resolution, video card, or monitor setup, your computer might no longer meet the minimum recommendations for running Aero themes.
Your computer doesn't have enough memory to run all of the programs that you have open and also run an Aero theme. If Windows automatically changed your theme to the Basic theme, and you want to change it back to an Aero theme, close some windows to free up memory, and then follow the steps below.
To use an Aero theme
If the troubleshooter doesn't fix the problem, try changing the theme back to an Aero theme.
Click to open Personalization.
Under Aero Themes, click a theme to apply it to your desktop.
To run the Aero troubleshooter
To try to get visual elements like transparency running again, use the Aero troubleshooter, which can find and fix problems automatically.
Click to open the Aero troubleshooter. If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
To learn more about the Windows 7 desktop features that use Aero elements, see What is the Aero desktop experience?
I had run the Aero troubleshhoter and got the problem, not sure if will saty like this, but the result of the scan says: Desktop Window manager is disabled, which was fixed by the troubleshooter, I have no ideea if this DWM will stay as fixed, next time I start Safari or not, but give it a try.
Hope this might solve it -
Have the web service API URLs changed?
I'm currently in the beginning stages of working with the iTunes U Web Service API, and I'm running into an issue.
Step 2 of uploading a web services document (pg 50 of the admin guide) says to request an upload URL. The base URL for this request:
https://deimos.apple.com/WebObjects/Core.woa/API/GetUploadURL
doesn't seem to be valid. I am receiving 404 errors:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<title>404 Not Found</title>
<meta name="generator" content="Indigo">
</head>
<body>
Not Found
The requested URL /WebObjects/Core.woa/API/GetUploadURL was not found on this server.
</body>
</html>
I've tried added the identifier path but still no luck. Just to be clear, I am generating and sending a proper authorization token; the issue is that the destination URL seems to be invalid.
Have the API URLs changed or am I missing something?
ThanksHi Chris,
A couple of things ...
First is that you want to read page 54 of latest admin guide.
Nextly, the basic way to access the API hasn't changed ... Apple has changed the XSD and the specifics of the API itself ... but not the way you call it. That's been pretty steady since I've been messing with it.
The base URL should look like this:
https://deimos.apple.com/WebObjects/Core.woa/API/GetUploadURL/your-university.ed u.111.222.333
"111.222.333" is called a "handle" and it uniquely specifies a resource (track, cover image, etc.) within iTunes U. "111.222" is a path to the resource "333".
After the base URL, you have to add the same kind of token string that you would for "Browsing" iTunes U ... that is a string in the form ...
credentials=foo&identity=user&time=123456&signature =abc123abc&type=XMLControlFile
A question mark "?" separates the base URL from the token string. Whatever you do, do -not- forget the type=XMLControlFile! The manual does not emphasize that you need to add this token, but you must to use the API. -
Ok. So I just changed my ADMINISTRATIVE ROOT PASSWORD the other day and when I tried to log in today I forgot it. I tried different variations of
the password I had set, because I wasn't sure if i had maybe set it in Caps Lock or used a different number in the sequence. I got the message several times
about "too many attempts, try again later". Does the computer lock me from signing in even with the correct password after a certain amount of failed
attempts? If so, how long does this lock last for? When can I try again? Or is there something I need to do to remove that lock now? I'm pretty sure I
had the right password finally but it still wouldn't accept it.
Also, I don't have any other administrative users set up on my macbook pro. I'm the only one who uses it, so I've always just used that original User from my
original setup.giselafromclongriffin wrote:
Ok. So I just changed my ADMINISTRATIVE ROOT PASSWORD the other day and when I tried to log in today I forgot it. I tried different variations of
the password I had set, because I wasn't sure if i had maybe set it in Caps Lock or used a different number in the sequence. I got the message several times
about "too many attempts, try again later". Does the computer lock me from signing in even with the correct password after a certain amount of failed
attempts? If so, how long does this lock last for? When can I try again? Or is there something I need to do to remove that lock now? I'm pretty sure I
had the right password finally but it still wouldn't accept it.
Also, I don't have any other administrative users set up on my macbook pro. I'm the only one who uses it, so I've always just used that original User from my
original setup.
Do this:
1. Reboot
2. Hold apple key + s key down after you hear the chime. (command + s on newer Macs)
3. When you get text prompt enter in these terminal commands to create a brand new admin account (hitting return after each line):
(Type these commands very carefully)
mount -uw /
rm /var/db/.AppleSetupDone
shutdown -h now
4. After rebooting you should have a brand new admin account. When you login as the new admin you can change the passord on the old one. -
On some sites certain lines appear with the bottom half missing, as if obliterated. Changing the font or its size does not help. The error does not appear with Iceape or Chromium.
I looks that the whole line doesn't fit in the container, so the bottom part is cut off. The usual cause is that a font is used that takes more vertical space, so any increase or changes from the font in what the website prescribes can cause this issue. I've seen web pages that were even affected by changing the minimum font size from none to 1 (!). If you do not have the font installed that the website specifies then Firefox will fallback to another (default) font that may have different dimensions.
-
where can i find the settings to change my rescue email on my mac?
The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
Manage your Apple ID -
https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
Maybe you are looking for
-
How do I add "category" information to my id3 tags - answered
The thread which posed this question: http://discussions.apple.com/thread.jspa?threadID=261463&tstart=0 has been locked so I'm answering it here. The 'Category' column is populated by the category of subscribed podcasts, which is set in the feed and
-
Just recently I am getting the following error message when trying to access web sites. I am using Firefox browser version 10.0.2. I get a pop up window stating "Exc in ev handl: TypeError: c.location is null" as the web site page is being displayed
-
Accidentally Deleted Quick Time
I was recently removing unused programs to open more space on my hard drive, and I accidentally deleted Quick Time. Now everytime I try to open my iTunes, I get an error and I cannot open it. Is there any way I can reinstall Quick Time?
-
[solved] usb-storage-devices (sticks) are not longer mapped via citrix
Hello, at work we have linux-clients (Arch, Plasma5, updated weekly) connected to a computing center (Win 2008 Servers) via citrix-receiver. In the past, usb-storage-devices were mapped, so we could acces them in Win. Now, they are not longer mapped.
-
Parsing sendmail log file in a Java application
Are there any good parsing libraries for sendmail log files? I already found these libraries but I'm not sure if they do what I need: http://www.opennms.org/documentation/java-apidocs-stable/org/opennms/netmgt/syslogd/package-summary.html http://code