Have trouble getting it to start up

When I click on the Icon the program shows up in the process tree under Task manager, but the window does nor open up.

Presumably it is running tiger 10.4.11?
It may be able to run Leopard 10.5:
Leopard system requirements:
http://support.apple.com/kb/SP517
But that is as far as the old PPC Macs can go, and Leopard can cost up to $200 on Amazon.

Similar Messages

  • At work we have many who travel with train alot, where the internet is very unstable at best. And  they have trouble getting their e-mails. So the question is if there is a way to increase the mail cache in iOS 7, to lower the dependence of internet.

    At work we have many who travel with train alot, where the internet is very unstable at best. And  they have trouble getting their e-mails.
    So the question is if there is a way to increase the mail cache in iOS 7, to lower the dependency of a very poor internet connection.

    I don't think so. Unless it's in the settings, there's not much that can be done.
    are they using wifi on the train? If so, maybe switching to cellular. There are devices like the Mifi, which is a battery operated portable wifi hotspot that they can connect their device to.
    If the wifi on the train is solid, I know I've had issues using certain hotspots. For example, my yahoo mail simply will not pull down via the mail app if I'm on some AT&T hot spots. But if I go in via safari then it works. So if the signal is good, maybe using a different way can help.
    Or maybe looking for a mail interface that isn't apple's. There are others in the app store that may have better function or more control.

  • I have a macbook air and have trouble getting images to load on ebay, many blogs

    i have a macbook air and have trouble getting images to load on ebay, many blogs and also pinterest. What can I do to improve performence?

    this is not normal but try to see the multiples accounts in the mail check if his account is not connected yet

  • I have trouble getting the scrubber bar to show. How can I get it to show on my screen?

    I have trouble getting the scrubber bar to show on my screen. Sometimes it's there and sometimes it's not. How can I get it to show on the screen whenever I want. Nothing in my manual answers that question.

    The Users Guide says:
    Additional audio controls
    To display additional controls, tap the album artwork on the Now Playing screen. You can see elapsed time, remaining time, and the song number. The song’s lyrics also appear, if you’ve added them to the song in iTunes.

  • I am have trouble getting music I have already purchased in the past to transfer to my phone after I did an update.  The music is there and I can see it but it cannot be played when the music is put on shuffle. It just skips right past it? How do you fix?

    I am having trouble.getting music that I have purchased in the past to transfer to my phone after I did recent update on the phone. I can see the music, it is in a lighter font and appears to still be there but will not play.  When placed on shuffle it will skip right over this music. I have already paid for this music and have been able to play it at one time but that was before the update. Why can I not listen to this music anymore?

    Did you ever resolve the iCloud problem.I am in the same position and its driving me mad!!! If you have a link to an solution I would appreciate it.

  • Trouble getting TV to start

    I have had FIOS for the same tv for several years with no problems. Starting a month ago, I have had problems getting the tv to start. Sometimes it starts when I hit the power button. Sometimes I need to hit the power button 5 times to get it to start. Most of the time it starts after 20 attempts and 15 minutes. Restarting the STB does not always help. I received a new STB and it did not help. I bought a new HDMI cord and it does not help. It seems that something is wrong getting the connection to 'ping' or getting the handshake going. Once I get past that point, everything is OK with the tv.
    thanks in advance

    sounds like the tv is turning on but the hdmi is not catching.  SO try two things
    set top box auto correct.
    menu>customer support>in home agent > set top box auto correct 
    AND if that doesn't work, test another type of cable between the tv and the set top box.  try a component cable, RCA cable or coax cable between the set top box and the tv.  If those turn on flawlessly and the hdmi does not, then you know it's a problem with the hdmi port on the tv, the cable or HDMI in general.  your work around is going component cables (they are HD) between the set top and the tv.   The hdmi might be bad at that point.  you've tried multiple set top boxes, so it would not be the hdmi from the sett top box, it would be the hdmi in your TV. 

  • Since installing IOS 7.03, I have trouble sending messages now.Starts sending but never completes.

    Since installing IOS 7.03, I have trouble sending messages now.
    Starts sending but never completes.
    Anyone have any solutions?

    Addendum
    Sending straight from the mail client in any/all of the Yahoo accounts works just fine. The bug just seems to happen when sending links from Safari.

  • What do i do if i have trouble getting into game center

    what do i do if i am having trouble getting into game center

    Hi,
    Please help us: what is your machine ?
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Trouble getting iCal Server Started

    I've got a fully qualified DNS and reverse DNS entry for the Second IP on an OS 10.5 server; 192.168.1.251 setup for ical.domainname.com.
    I've got a site set up ical.domainname.com at port 8008.
    I've got the iCal server in Server Admin set to ical.domainname.com http port 80008.
    When I click Start iCal I get the error message: "No virtual host found for iCal service".
    What am I doing wrong?
    HELP! Thanks...

    I'm stuck with a similar issue and please don't shout at me if it has already been explained above because I didn't understand some of the posts!
    We have a small workgroup (only 5 users) and I have just upgraded from Tiger to Leopard Server. The upgrade appears to have considered our setup to be 'advanced' so I do not have access to the Server prefs app and must continue to use Server Admin/WGM. The server runs as an Open Directory Master and also provides AFP, mail & webmail, DNS & firewall services.
    I cannot get iCal Server to start. I just get the message 'No virtual host found for iCal Service'. I looked at the previous posts but they seem to relate to an OD server running on 10.4 on a different computer but all my services are on the same server, running Leopard.
    Can anyone help?
    TIA
    James

  • I have trouble getting my new Apple TV 2 to work to the internet. I have an Imac with OsX 10.6.8 using a 3G modem to connect to the internet. I have a Time Capsule with Airport. I can't get the Apple TV to see my internet connection

    I have an Imac with OSX 10.6.8 dual intel core.
    Apple TV 2
    Timecapsule
    3G modem connected to iMac for internet access.
    I have tied to get Apple TV2 to see the inernet but it does not seem to see the inernet connection either via the Airport network or even if I connect it directly with a ethernet cable to the Timecapsule or the iMac.
    I have tired to set up Home Sharing but it doen't see the Itunes Store so no go.
    I don't have wired internet but it is probably something to do with using a 3G modem
    Any tips on how I can check if the TV coonect to internet and what to do about this problem?
    I was trying to connect my HD TV earlier using a WiFi USB modem but it could not see my iMac. Apple Support told me to buy an Apple TV but that is not helping as I can't see anything there either.
    Regards from Michael

    Thank you so much Paul_31 for your suggestions, HUGELY appreciate the effort
    I have reset the printing system, a few times for good measure but nadda.
    I have also looked at getting the software from the Apple site after seeing that with Snow Leopard you should let the operating system lead the install not the manufacteurers software as it is most likely out of date.  I too found it wasn't there so I uninstalled the software got up the CLX_3300 series stuff then went from there with the USB cable.  It apparently hasn't worked either
    Unfortunately now after using the print utility to scan for a while that has now gone again on the last restart of the Mac.  I am so completely clueless
    The box says the printer is compatible, the place of purchase said it was compatible, the Samsung site says it is compatible.
    I think it's the set up of my Mac? Our maybe a glitch in the network settings?
    Thanks again

  • Since upgrading to Maverick I have trouble getting incoming mail?

    Ever since I upgraded to Maverick my mail has not worked consistently.  It has been 2 days since I've been able to get any incoming Mail.   It seems to deliver when it wants and it's on strike now.   Thank goodness my iphone email works.   I've been to the genius bar w/o resolution (they thought it was due to gmail account which we deleted and not eliminate the problem).  I can send but can't receive.  It is a POP email acount.  I've read other posts - shutting down the computer does not help.  Any suggestions?  I am fully updated.  I have a iMac intel, OS X 10.9.3.  Mail 7.3.  Thanks!!

    Hi,
    Thank you for taking an interest in my problem.
    What actually transpired was my Macpro (contacts) would not update after I put changes in to contacts in either iphone or ipad. Apple checked and discovered that changes made in either macPro (contacts) and contacts(cloud.com) did not talk to each other so concentrated on this.
    The rep had me signout of my macpro user account, and create a temp new user to which I signed into my icloud account as normal. Then, changes in either macpro or cloud.com now worked. He then did some changes at his end and after exiting the temp user and resigning in as origal macpro user this now made changes to each other. OK. We then deleted the temp user and this worked! but since then I have discovered that iphone and ipad now do not change icloud.com contacts or calendar so would not of course change contacts on macpro!
    Other services on icloud (photo stream, mail, docs and data, find my ----, etc) all function with my iphone (so have to presume my ipad also, but this is not with me at this time)  so the problem is confined to just contacts and calendar.
    In summary, I do have only one icloud address but which appears to have two sets of data as the devices will communicate with something but not altogether!!
    I am thoroughly confused, especially as it was all fine until I upgraded from M\Lion to Mavericks on my shiny new macpro a few weeks ago. I  had moved from Windows to Apple to avoid just such problems.
    Not enamoured with Apple at the moment, but thank you for your assistance - hope this is a better explanation.
    Kind Regards

  • When I open a link to anew page, I find I have trouble getting back to the first page, so I have to close down and re-opn. The top-left back arrow does not work.

    This appears to have happened since I installed Firefox 4 today.

    Do you have that problem when running in the Firefox SafeMode?<br/> ''A troubleshooting mode.''<br />
    You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut. Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.''
    If not, see this: <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • Have trouble getting the listener to work

    At the end of configuring the nodes for the Listener I get this error message:
    Problem in configuration: oracle1: LISTENER_ORACLE1 Listener start failed. Listener may already be running. CRS-0215: Could not start resource 'ora.oracle1.LISTENER_ORACLE1.lsnr'
    if i try to manually start the listener with 'srvctl start nodeapps -n oracle1' i get the following errors;
    failed to get ip for locale host
    and then a whole bunch of errors of it trying to start the listener on every ip mentioned in the host file

    I'm not sure your problem.
    1. Please check listener, that is running or not
    $ ps -aef | grep LISTENER
    and try to kill it
    2. start by again by srvctl
    srvctl start listener -n ORACLE1
    ... Please post error again and tell information about ORACLE ENV

  • Anyone have trouble getting verizon to port a number?

    We are going on a month now trying to get verizon to port a number from cox cable.
    When called they said they have it all under control and will be done by a certain date.  When that date arrives we get the same email..
    "Thank you for recently placing an order with Verizon. Unfortunately, we need additional information to process your order. To avoid any service delays, please contact Verizon as soon as possible and reference order #"
    I don't understand what advantage it is to them to give customers the runaround and tick them off.  What are they trying to accomplish?
    And one other odd thing, everytime we ask them what the status of the "number port" is, they reply, oh you mean the "winback".  What the blue blazes is a "winback"?   And they want to argue with us that it is not called a port and is instead called winback.    Funny,  every other phone vendor calls it a "port".    go figure!
    The winback certainly isn't living up to it name.   They are about to win me right over to time warner.   
    I'm sure TWC will be just a dumb, but they are a lot cheaper.
    Verizon, Wake up!   You have one more chance to get this right before I file the complaint with the FCC.
    Here's the link for anyone else in the same boat.
    https://consumercomplaints.fcc.gov/hc/en-us

    Welcome to the forums.  You're talking to other customers here.  If you want to get a message to Verizon you need to call or chat with them.
    I recently help a family member port a number out of Verizon to a VoIP provider (a "loose away," perhaps?).  Verizon was horrendous to deal with refusing to release a never agreed to port freeze even after many orders were placed and promises made.  An FCC complaint is what finally sped things along.  I wouldn't wait to file one.
    Good Luck.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

  • Anybody else have trouble getting a serial number?

    I bought LIGHTROOM 4 from amazon.com, and did not get a readable serial number.  So far, I have been on the chat with the support people 5 times, have provided proof of purchase, and have been told that I would receive the re-issued serial number in 24 - 48 hrs.  Each time, they fail to contact me as promised. Is customer service and support with ADOBE a joke?  I can understand the need to protect the software and follow safeguards, but if they tell you that they will contact you in 24 hrs, then that's what they should do.

    Thanks for doing that Victoria.  I thought about returning to amazon and then re-ordering another one, but amazon's site say they don't accept opened software returns, and adobe's site says you must have your serial number to return software, which is my problem. My open ticket is #0209510410 in case they happen to view this forum. The repeated contacts with the representatives are a waste of my time, but also a waste of adobe's money & resources when they could have resolved it on the 2nd contact in this case. Have a great day!
    --Matt

Maybe you are looking for