Having compatablity issues with windows 7

apple application support not found

hello, please try [[Upgrade your graphics drivers to use hardware acceleration and WebGL|updating your graphics driver]], or in case this doesn't solve the issue or there is no new version available at the moment, disable hardware acceleration in ''firefox > options > advanced > general'' while you're in safemode.

Similar Messages

MAC (10.6.8) users having permission issues with windows 2003 AD and NetApp SAN environment.

I have created a cifs share that is being accessed by Mac users that are part of a windows 2003 AD. When the user edit data and save it back to the share, the security permission are reset and none of the other users can see the new data unless the permissions are refreshed on the windows server. I have found following links that talk about a similar issue but with an older MAC OS. I am using 10.6.8.
https://discussions.apple.com/thread/1776934?start=0&tstart=0 (Max OS X doesinfluence ACL's on CIFS on 10.5)
http://www.macwindows.com/snowleopard-filesharing.html#033010b(Max OS X 10.6.3 fixes saving issues on CIFS)
Any help will be appreciated.
Thanks,
Manu

This is a 'known problem' as discussed on the MacWindows site, see http://www.macwindows.com/More-on-OS-X-conflicts-with-Windows-Server-Deduplicati on.html
It appears to still affect Mavericks 10.9.5 at least from the lack of any positive reports to the contrary. It is perhaps a bit late but it would have been worth signing up for the public beta of Yosemite and testing that and if needed reporting it as an issue for Yosemite as this will be getting more bug fix attention than Mavericks now.
I would agree turning off de-duplication is not a desirable solution, however other possibilities to consider are installing the standard Samba software on a Mac and using that instead of Apple's SMBx software. This is done by using the SMBup installer See http://eduo.info/2013/07/13/smbup-faq it does not officially list Mavericks but I did see at least one report that it still worked. A second possibility is to install ExtremeZ-IP which installs an AFP server on to your Windows Server and also gives the bonus of supporting Spotlight searches.
Note: You should only try SMBup on a test setup first.

Anyone else having an issue with TCP connections using iCloud for Windows?

Hi,
Before I asked this question, I did wait to see if any related questions came up, but none did, so I submit it now.
On my admittedly older laptop running Windows 7 64b Home, I've run into difficulties with the iCloud for Windows app to the extent that I had to uninstall it.
It would that, as my laptop was running, in the background, iCloudServices.exe would endlessly iterate TCP connections, which, while not actively sending or receiving any data, after some hours would number over 100 instances, taking up resources, and grinding my laptop's WiFi connection to a grindingly slow pace. I ended up, within the app, turning off everything, iCloud Drive and Photos, (I never used bookmarks), but still this would continue to occur.
I contacted Apple Support, explaining what was going on, and they stated they only dealt with IOS and gave me a Microsoft Support number. When I called Microsoft support, I came more and more to the realization that the issue was specifically with the iCloud for Windows app, as that was the only software that was endlessly creating and not closing TCP connections as it was. How was Microsoft supposed to solve an issue with Apple code?
So I called Apple back, whereupon they insisted it was a Microsoft issue. I explained other cloud services installed on the same computer were not having the same issue, it was unique to ICloudServices.exe. They stated they only dealt with IOS. I stated I purchased an iPad Air less than 7 months ago, and was trying to run iCloud in support of that. They again stated they only dealt with IOS, and suggested I again try Microsoft. I asked them if it was reasonable to expect Microsoft to solve issues with Apple code? They said regardless, there was zero support offered for anything having to do with Windows, and all I could do was uninstall the app, which I did, though that did not feel very satisfactory to me. My thinking is, if Apple writes a Windows app in support of their hardware, they should offer support for it.
Anyway, I was just wondering, is this an issue unique to me? or have others experienced a similar issue? I found this issue by opening the Windows Resource Monitor, looking under the Networking tab, and scrolling through the TCP Connections section to find 100+ concurrent iCloudServices.exe instances listed, whereas even Chrome, with multiple tabs and extensions, topped out at around 20.
My one month old Desktop, DYI, sports a solid Asus 1150 MoBo, i7-4790k cpu, 16GB Ram, and an EVGA GTX 970 video card. I list some specs only to illustrate this computer has no hardware issues in comparison to my long in tooth laptop. On this desktop, running Win 8.1 Pro 64b, at least as many, identifiably Apple, background service TCP connections are created even compared to Chrome, regardless of many tabs being open, many extensions, and even some related apps. Adobe does not even come close, though I run the full CC subscription. On this new computer, running Windows 8.1 Pro 64b, there are currently over 50 TCP connections and loopbacks that do not identify themselves, with just a - for the Image, and PID. With the experience on my laptop, I wonder how many of these are generated by Apple software, if not specifically iCloud software?
The frustrating aspect of these connections is they seem in no way active, While the Chrome and Adobe connections can be seen to be transferring data, as long as I am not running iTunes, or so have my iPad actually plugged in, it seems 99% of the time these iCloudServices.exe connections are just taking up ports, neither sending nor receiving any data discernable to me under the Processes with Network Activity, or Network Activity lists, both displayed in the same window as the TCP Connections in the Windows Resource Monitor.
Though I am fairly ignorant as regards coding, it seems as if there is no call to close a connection, very specifically, iCloudServices.exe, when it is no longer needed, and the next time a connection is needed, a new one is opened, rather than accessing the one previously opened. The only other reason I could imagine this might be occurring is if my Norton Internet Security software might mask and/or block the port after a certain time of inactivity.
Anyone out there have any ideas or advice about this? Thanks in advance.

Thanks jared,
I'm still dealing with this issue through Apple. Some time after I posted this, I contacted Apple again. They did start a case up for me, as I was experiencing the same behavior on two different machines, with two different versions of Windows.
So far it remains unsolved. I've logged iClouds for Windows on my desktop, which is brand new, then logged for awhile after completely uninstalling Norton Security Suite, depending on the Microsoft security for some time, and finally logged after I uninstalled iCloud for Windows, restarted, installed a clean download, and connected using a completely different test account, which Apple set up for me. None of this made any difference. Looking at the logs, it seems every 10 minutes, iCloudServices.exe creates a new TCP connection to confirm I'm using less than 5GB on iCloud, (which I am by a good margin, using less than 2GB), it seems this connection is not closed, and when the next iteration rolls around 10 minutes later, a new TCP connection is created. I come very close to having 6 TCP connections created per hour, until I restart my computer. This works out to... 6 x 24 = 144/day.
Perhaps the article you posted will shed some further light on this. I'm thinking seeing the state of the connection through netstats, at the least, could help.
For the last week, I've been putting a hold on further logging, as Apple wants me to create a new user account on one of my computers, install iCloud for Windows there, and log it running in the other account. This however basically means I cannot use my computer for a fair number of hours, and I've been busy enough with work the past week that I haven't the time or energy to afford to set this up and run it. I've had need of my computers too much for the past week.

HT1925 I am having an issue with loading Itunes. I receive a missing dll file notice. Then another error message. I have reinstalled Windows & still get the error. I did not get the error until I recently did an ITunes update.

I am having an issue with ITunes after a recent ITunes update. I can not open ITunes, I get a message missing MSVCR80.dll file, Then an error 7 message. I have redone the OS for Windows 7 and restarted the computer. I keep getting the errors.

Do the following:
Uninstall from Windows the following five programs: iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour and Apple Application Support. You do this from an applet in Control Panel called Programs & Features (in Windows 8, 7, or Vista) or Add or Remove Programs (in Windows XP).
Download the latest version of iTunes from Apple and note the location you're saving it to so you can find it once it's done.
Run the iTunes installation as an administrator, just Right click iTunes installer and Run as Administrator.

Is anyone else having an issue with Muse 2014.2 Freezing/Crashing at launch? It worked perfectly up until tonight and nothing has changed on my computer. I'm running windows 8.1. I've tried logging in and out of CC, I've uninstalled and reinstalled Muse t

Is anyone else having an issue with Muse 2014.2 Freezing/Crashing at launch? It worked perfectly up until tonight and nothing has changed on my computer. I'm running windows 8.1. I've tried logging in and out of CC, I've uninstalled and reinstalled Muse twice with no change. Please advise. Thanks!

Are you getting any error when Muse crashes? what's the one function it lets you do before it freezes?

Itunes issues with Windows having to do with Apple's patent

I had a thought and am not sure if it's right. I was wondering if myissues with Apple Itunes store on Windows 7 has anything to do with the Patent laws and all with Apple and samsung and all that.

I had the same issues with Windows 8 Consumer Preview. I installed on a fresh system and still had issues.
I experienced extreme lag, with pretty much everything, and iTunes freezing once I attempted to change the currently playing song.
I had a mess with compatibility mode and found out that running it in with Compatibility mode enabled for Windows XP (Service Pack 3) and as an administrator fixed it. It works now, however, there is a popup message that comes up on launch telling you to change the compatibility settings, but pressing "OK" makes it go away.
How?
Open Windows Explorer, and navigate to: "C:\Program Files\iTunes" (For 32bit) or "C:\Program Files (x86)\iTunes" (For 64bit), unless you changed it.
Right-click on "iTunes.exe", select "Properties" from the context menu, and click the "Compatibility" tab.
Under "Compatibility mode" check off "Run this program in compatibility mode for:" and select "Windows XP (Service Pack 3)" from the drop down menu.
Further down under "Privilege level" check off "Run this program as an administrator".
Click "Apply" and "OK".
Should fix any issues, I have my default iTunes Media Folder Location within an external hard drive so unplugging all of my USB's wasn't an option.
Hope I helped!

I am having a problem with Windows Fusion installed on a MacBook.

I am having a problem with Windows Fusion installed on a MacBook OS 10. When attempting to use a Browser, (either IE, or Chrome), under Windows Fusion, I cannot browse to ANY page except Gmail.com.
I checked all security settings, and found no problem. Neither browser will allow me to do ANYTHING other than go to Gmail.com!!!
I am not sure if I have some virus on my Windows side, because Google and Safari both work perfectly on my Apple side, just not when running Windows Fusion.
Is there some setting I am missing, or do you think I have malware/virus issues?? My Internet connection is DEFINITELY working fine - I can send, receive, open, and close all my email on Gmail only, and can navigate freely on Gmail, but cannot get to any other site even hyperlinked to Gmail.
Any help would be greatly appreciated.
Thank you very much.

HartEJ wrote:
...Neither browser will allow me to do ANYTHING other than go to Gmail.com!!!...
If you've already tried my previous suggestions, it may be that something has tampered with the DNS settings in your Windows VM, which might bypass the settings your Mac uses. Assuming you're using Windows 8, these instructions explain how to check and change the DNS settings. There's also a link in those instructions listing a variety of suggested DNS settings. If you do try changing the settings, record what the settings currently are in case you want to return to them.

ITunes sync issues with Windows 7 64k Bit

I am beyond frustrated! I have attempted for the past 3 days straight to figure out why iTunes keeps having syncing issues with all my devices- Nano 8GB, Touch 8GB, iPhone 3G 8GB. When I first connected the devices for the first time iTunes froze up and I had to hard boot. I then had to "restore" the devices as they were messed up. Since then I have had syncing issues. It says it is syncing but then it stops and freezes before it is finished and is unresponsive requiring me to end the program. Then my computer does not recognize the iPod is connected so I have to reboot my computer and it all starts over again. I'm not trying to sync a million song, 600 songs less than 2Gig.
Called Apple, they had me uninstall iTunes 9 and reload it. That did not fix the problem. Called back and they told me to go to the Apple store and have them check my devices (they did not as they said they were pretty sure it was not iTunes or my devices) that it was probably Windows 7. MS points the finger at iTunes 9, Apple points the finger at Windows 7... all the while me (the customer) has no resolution. I don't care what the issue is... I would just like to figure out how to fix it (if it's my computer fine...I'll take it in to have it fixed) but I just cant get anyone to help figure out what/where the issue is.
I have tried many of the "tricks" that are posted when you google the issue.. ie reinstall drivers etc. The "Genius" at the Apple store searchd and found something that said it might be my motherboard needing an updated driver (I updated that and nothing changed).
Would REALLY appreciate it if someone could help
Thanks!

Hi,
Does your PC have a NVIDIA USB Enhanced Host Controller Interface (EHCI) chipset?
If it does, you may want to try the Microsoft hotfix available here: http://support.microsoft.com/kb/976972.
If not, try the general USB troubleshooting tips in this article: http://support.apple.com/kb/TS1286
-Jason

Labview 2012 Installer builder issues with Windows 7 64 bit

I have a clients project application program I am working on and am having a lot of trouble getting installed applications to work on Windows 7 properly. The Labview Installer sets the default installation directory to "c:\Program Files\" on Windows Xp and on Windows 7 64bit this defaults to "C:\Program Files (x86). When I install the application on Windows 7 and run it, because Windows 7 64 bit unreasonably protects this directory and every folder under it, if you try to write file to any subdirectory under it (like a reports directory), windows 7 will not let the file write to the directory and the file(s) disappear and you get permission errors. This has been difficult to address. Even logging in as administrator, I have difficulty changing the folder permissions. In addition, when I am in the file write process, if the default directory is coded to come up in the file Open/Save dialog, will not properly
go to and display these protected directories. So thinking that OK, I'll just chage the install directory to something direct to the C: drive and not the Program Files (x86) directory, so I have better control of the folder permissions. Now the Installer build gives errors. It built, but the install fails. Looks like National did not test this for Windows 7 very well. I have run into just about every issue possible with Windows 7 and Labview. Clearly Labview was not very well tested with Windows 7 6 bit. I do not have the Internet toolkit added to the application, only the VISA 5.2 driver. Anyone else having application issues with Labview and Windows 7 and have ideas how to work around this??
Attachments:
BuildErrors.txt ‏11 KB

It's no NI's fault and has nothing to do with 64 Bit either. It is something MS changed starting with Vista, namely tightening security of the whole system to a similar level as was usual on more professional OSes like Unix 20 years earlier. A user has not rights anymore to write into the location where applications are installed. This is for one reason to protect installed applications from being modified by malicious code.
Instead every application should write its runtime data in one of the user writable loacations such as the user's Documents directory for data files, or in the user's or the machine's configuration directory for configuration settings. For single installations you could always set the directory which your application got installed into to be user writable by changing the rights of that directory afterwards but for applications that get installed on normal user computers this is a VERY hacky and discouraged move. Same about installing your application into the root of your system drive. I think it was an oversight by MS to not protect that directory too from user modifications, but was most likely unavoidable to allow DOS application installations to still work.
LabVIEW has functions to retrieve a whole bunch of those preconfigured and user writeable locations and you really should change your application to make use of those locations, instead of trying to write into the installation directory or installing the application into the root location of the system drive, if you want to be compatible with Windows Vista/7/8.
Windows 7 also requires for a number of actions such as installing programs or drivers so called elevated rights. This means that even if you are logged in as administrator you have to explicitedly provide the admin password again to be able to perform the action. This can be done by starting the program as administrator, when this is available in the right click pop-up menu, and is also sometimes done automatically for applications that Windows determines to need those rights such as setup programs for installations.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

I have an older version of Firefox 3.6.6 I believe I am having an issue with one of the websites I sign into. Is there any way to update to the newest version

I have an older version of Firefox 3.6.6 I believe I am having an issue with one of the websites I sign into. Is there any way to update to the newest version. Without losing all my bookmarks and saved pass words?

Hello johngervais, the latest firefox version is 26.0 (today 4 Jan 2014).
note that [https://support.mozilla.org/en-US/kb/firefox-no-longer-works-some-versions-windows-xp Firefox no longer works with some versions of Windows XP], if you have '''xp with sp2 and above''' you can update to latest version, see : [http://www.mozilla.org/en-US/firefox/26.0/system-requirements/ Firefox 26 System Requirements]
if you are able to update to latest version then see : [https://support.mozilla.org/en-US/kb/common-questions-after-upgrading-firefox-36 Common questions after upgrading from Firefox 3.6]
see also : [https://support.mozilla.org/en-US/kb/firefox-just-updated-why-it-asking-me-update-again Firefox just updated - why is it asking me to update again?]
Don't worry you won't losing bookmarks and passwords after update firefox.
thank you

Having Major Issues with Flash Player

Using IE 8, 64 bit, flash player 11.4.402.287
Having major issue with flash player! can not play a lot of games on FB. Games tell me that i need to update my Flash Player, PC says I have the latest version installed already.Ok, thought i would uninstall/reinstall...no go. Will not uninstall, says I need to close IE...which none are open. This issue has been going on for weeks now. I have done everything the help said to do and still not working. I need HELP!

im using the recent adobe flash player
windows XP, internet explorer, 10.045.2, 32bit
im not sure how this works, but im sure all that is correct:)
if you need additional infomation, just let me know

Major Issues with Windows XP and Sound Blaster Audig

As mentioned in the post title, I'm using a Sound Blaster Audigy 4 card (recently purchased) and am having issues with Windows XP apparently because of it. When the card is physically installed, but the drivers are not, there are no problems. However, when the drivers are installed, Windows XP's "explorer.exe" crashes on boot, locking up the start menu and any other open windows. Now, I can manually end the explorer.exe application and then reboot it, and things will work... however, I cannot imagine that that is the intended functionality of this card. Additionally, I suspect the card in the failure of a game (Eve Online) but I would assume the issues are related. I've already narrowed the issue down to the Sound Blaster drivers. I've tried booting with the SB drivers but without the video card drivers, and the problem recurred. Every time I boot with the SB drivers installed, it fails. Without them, things seem to run normally. If it helps, I'm using an Intel Core 2 Duo E6400 processor, with GB of DDR800 RAM. I've installed Windows Service Pack 2 and all the other updates. The video card is a Geforce 7950 GT, with the latest NVidia Forceware (93.7) drivers. I've had this problem with both the Audigy drivers on the CD that came with the card and the newest ones downloaded from this website. My motherboard is a Gigabyte GA-965P-DS3, which includes onboard sound hardware, but I have disabled it at the BIOS level. I can provide dxdiag information or anything like that if necessary. Does anyone have any advice, suggestions, or have you encountered a similar problem?Message Edited by DerekKatz on 2-04-200603:2 AM

Thanks for the helpful reply Dan
I ran the file, CTZAPXX.exe, like suggested, and it ran without a problem. It installed the files and even required me to reboot my computer!!
However, after a computer restart, I am still in the same boat. Codecs are installed, but the location of the device is "unknown". In Device manager, there are no unknown devices; it shows the codecs in the sound tab, but no actual hardware; as if my sound card does not exist.
I use my computer for music, and my buddy needs me tomorrow night to play some music stored on my computer. I really do appreciate the help I am offered. I do not mean to sound impatient, but I really need this device fixed, or I will have to have him buy me a sound card....

Captivate 5.5 Question: We seem to be having an issue with the screen capture piece not recording "e

Captivate 5.5 Question: We seem to be having an issue with the screen capture piece not recording "everything".
We're running 5.5 as an administrator on Windows 7 and my co-worker is trying to capture a webinar (GoToMeeting) with Captivate and it is not recording anything in the GTM window, except the last slide. Anyone have this problem or know a fix? Not much is mentioned in the Adobe forums.

Captivate simply doesn't 'hear' some screen events on certain applications and you just need to resort to doing manual captures at these points.
I usually set up my manual capture button to be F2 so that I can hit it with my left hand while my right hand is on the mouse navigating through the task.

Itunes issues with windows 8... laggy?

anyone one else having abit a of laggy issue with playing music on windows 8?
i just upgraded to windows 8 con. preview, and its great and fast.
i use to have windows 7 and itunes never skipped a beat.
i have a sony viao with an upgraded ram and ssd hdd.
and its pretty fast.
so i dont think its my computer and windows 8 seems to be fine.
anyone else having this issue? but it only happens now and then.......
NOTE:
i have my music all copied to my sdd hdd aswell
and thats all thats really on there as i have ext. hdd's.
i have a average size library in itunes with around about 50gb of music.

I had the same issues with Windows 8 Consumer Preview. I installed on a fresh system and still had issues.
I experienced extreme lag, with pretty much everything, and iTunes freezing once I attempted to change the currently playing song.
I had a mess with compatibility mode and found out that running it in with Compatibility mode enabled for Windows XP (Service Pack 3) and as an administrator fixed it. It works now, however, there is a popup message that comes up on launch telling you to change the compatibility settings, but pressing "OK" makes it go away.
How?
Open Windows Explorer, and navigate to: "C:\Program Files\iTunes" (For 32bit) or "C:\Program Files (x86)\iTunes" (For 64bit), unless you changed it.
Right-click on "iTunes.exe", select "Properties" from the context menu, and click the "Compatibility" tab.
Under "Compatibility mode" check off "Run this program in compatibility mode for:" and select "Windows XP (Service Pack 3)" from the drop down menu.
Further down under "Privilege level" check off "Run this program as an administrator".
Click "Apply" and "OK".
Should fix any issues, I have my default iTunes Media Folder Location within an external hard drive so unplugging all of my USB's wasn't an option.
Hope I helped!

When will there be an itunes update that resolves the compatibility issues with windows 8

When will there be an itunes update that resolves the compatibility issues with windows 8

I hadn't heard there are issues. Can you tell me what the issues you have run into are? I just downloaded it yesterday on my new laptop and I am having issues syncing today...

Having compatablity issues with windows 7

Similar Messages

Maybe you are looking for