Having some trouble with Apple Application Support...

So, I recently purchased a new 3G iPod Touch. I already had iTunes installed, so I did not think I would have a problem. However, it prompted me to update to iTunes 9. I didn't give it much thought when it froze the first few times and simply thought it was a download error, so I just stopped the installation process and retried. After letting it run, the process gave me an error message prompted from the "Publishing Product Information" status. I tried uninstalling all the Apple-related software on my computer in hopes that it would work to no avail. I received the same message. Then I tried going through this list of troubleshooting procedures [http://support.apple.com/kb/HT1926?viewlocale=en_US] which also did not work. I did some research and found that some individuals had luck with extracting each of the separate install processes from iTunesSetup and proceeding to install each one separately. One person claimed that by starting with AppleApplicationSupport, he somehow overcame the issue. However, once the installation process reached a certain point [also the Publishing Product Information status], the process froze and a short while later fed me an error message (the error reads: 'Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKeyToken="1fc8b 3b9a1e18e3b",processorArchitecture="x86"'. Please refer to help and Support for more information. HRESULT: 0x800736FD). I'm at a loss as to what to do now.
Message was edited by: BigPoeticCanine

Some experimental advice in this context. (I generally try this for different install errors than the publickeytoken jobbies.)
We might be able to get things to go through better if we do a "standalone" Apple Application Support install, and then do the iTunes install.
First, uninstall iTunes again.
Now go "Start > All programs > Apple Software Update". *Do not install anything yet.*
In ASU, go "Tools > Open Downloaded Updates folder". Delete any files currently in there.
Go back into ASU. Select the iTunes offering. Now go "Tools > download only".
After the downloads complete, go back into the Downloaded updates folder. Doubleclick on the AppleApplicationSupport.msi file to do a "standalone" AAS install.
Does that one go through okay this time?
If so, doubleclick on the iTunes.msi this time. If that goes through okay, does iTunes launch without the error message now?

Similar Messages

TS3276 I have installed OS X Mavericks on macbook pro, macbook air & iMac but I am having terrible trouble with apple Mail. I need to take all accounts online frequently OR worse I have to quit mail and restart computer. Is anyone else having problems?

I have installed OS X Mavericks on macbook pro, macbook air & iMac but I am having terrible trouble with apple Mail. I need to take all accounts online frequently OR worse I have to quit mail and restart computer. Is anyone else having problems?

I just checked to see if the update to OS X Yosemite 10.10.1 solved any of the issues outlined in my previous post, and to my dismay, nothing has changed -- all of the previous problems persist.
My iMac (8) -- it's renamed itself eight times since the recent troubleshoot with the Apple tech rep -- shows up as a shared device in Finder on my MacBook Pro, but when I click on it, I cannot establish a connection using "Connect As". So I've attempted to connect using the menu "Go/Connect to Server...", using both (alternately) the iMac's name and IP address, to no avail. I get a message which reads: "There was a problem connecting to the server 'Peter's iMac (8)'. This server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again."
Here's what I know:
The server -- Peter's iMac (8) does exist;
The server -- Peter's iMac (8) is available at this time;
The server name -- Peter's iMac (8) -- is correct, as specified in the system sharing preferences;
The server IP address is correct, as specified in the system sharing preferences;
The network connection is active when I attempt to connect.
I'm convinced the problems stem directly from the OS X Yosemite update. None of this was ever remotely an issue in the previous OS X's -- any of them. This is maddening! What can be done? Apple?? Anyone???

I downloaded the Windows 64-bit version of iTunes, but the application won't run. It comes up with Apple Application Support - Error 2. How can I fix this?

I downloaded the Windows 64-bit version of iTunes, but the application won't run. It comes up with Apple Application Support - Error 2. How can I fix this? I have uninstalled and reinstalled it several times and it still doesn't work.

What computer do you have? is it 32 or 64 bit operating system?

ITunes store no connect with apple application support 2.0.1

I have found that my store wont connect when I installed the latest Quicktime. After several trial an errors i pinpointed it down to the latest apple application support. Store works fine with the old version of 1.5.2. Just wondering if anyone else has experienced a loss of store loading all of a sudden. It might be this problem.

7 september 2010
For some reason (Firewall / Internet security programs?) the Apple iTunes installation program doesn't install all the necessary components.
There is a way to manually unpack the installation program to it's 6 different components and install each component one by one.
(Advantage: you don't need to uninstall or deactivate your security programs)
Best thing to do is:
1) Download the iTunes installation program (directly from the Apple website
http://www.apple.com )to your desktop,
WITHOUT INSTALLING the iTunes application.
2) Download he WinRAR decompression/unpack utility (for example from:
http://download.cnet.com/WinRAR-32-bit/3000-2250_4-10007677.html?tag=recommended Downloads )
and install it on your desktop for easy use.
3) Unpack the iTunes installation program, using WinRAR by rightclicking the
iTunes installation program and choose 'Open with WinRAR'.
Don't bother with the message from WinRAR about files beïng corrupt
(these are probably the unreadable 'Apple Mac' files).
4) You'l see that the original iTunes installation program consists of 6
different installation programs.
4 utility programs (necessary for iTunes to work correctly)
- Apple Application Support (Version: 1.3.2)
- Apple Software Update (Version: 2.1.2.120)
- Apple Mobile Device Support (Version: 3.2.0.47)
- Bonjour (Version: 2.0.3.0)
and 2 main programs
- Quicktime
- iTunes
Copy these 6 programs to your desktop with WinRAR,
where they will appear unpacked.
5) Install each program one by one IN CORRECT ORDER:
- First the 4 utility programs, one by one.
- Following this, install QuickTime.
- Install iTunes as last.
6) Check the Windows installed programs list to see if they're all installed.
You can check the versions of te programs by clicking the information toolbar
for each program.
Good Luck..!

I've tried updating and reinstalling itunes 10.6 everythime i try to open it it comes up with "Apple application support not found. apple application support is required to run itunes. please uninstall , and install itunes. error 2 (windoes error 2)

i've bought an iphone and it said i needed to update itunes to 10.5 or higher so i tried to update. it didn't workso i uninstalled and reinstalled different versions of itunes between 10.5 and 10.6 but it either wouldn't install properly or it would then i would come up with this warning. "Apple Application Support. Apple Appliction Support is required to run iTunes. Please uninstall itunes, then install itunes again. Error 2 (windows error 2). i've uninstalled and reinstalled multiple times.
please help.

Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

I am having some trouble with receiving messages from iMessage users when I don't have my iMessage turned on. When I called for support, I spent 30 min waiting and the woman's response to me was "Turn on your iMessage." I prefer not to use it

I have an iPhone 5s and a MacBook Pro. Ever since I updated my computer software to Yosemite, it linked my Apple ID with my phone number and I am not receiving messages from iMessage users on my phone, but rather to my computer. I don't like to use iMessage so I keep it off and would like to receive all messages as SMS texts. I have already tried changing my Apple ID password, logging off of my Apple ID in iMessage on my phone and turning it off, and changing settings on messages on my computer. Nothing is working. Either the messages continue to go to my computer or the messages trying to be sent say they cannot be sent.
After spending 30 + minutes waiting for technical support, the woman helping me (who did not give me her name) told me I should just turn on iMessage. After explaining that I don't like having iMessage on and asking why it worked for at least a year up until this point she said "things change and sometimes we don't know why things do what they do". She asked me about various other things on my phone such as bluetooth and told me to turn on and off airplane mode and the call disconnected. I have not been contacted since, even though she has my phone number.
I am hoping for some help and also hoping people don't get the type of service I received tonight.

I think you can solve your problems by removing your AppleID email address from BOTH the Messages setting on your iPhone and the iMessages settings on your Mac.
On iPhone:
Settings > Messages > iMessage > Dissabled
Settings > Messages > Send & Receive > touch the "(i)" < touch "Remove This Email"
On Mac:
Open "Messages" application
Click "Messages menu > Preferences
Click "Accounts"
Select your AppleID account
Under the "You can be reached for messages at" settings, uncheck your AppleID email address and your phone number
Then uncheck the "Enable this account" setting
And lastly, ask all of your friends with iPhones to delete all iMessage conversations (blue bubbles) in their entirety.
To test, send a friend a new text using their phone number (not their email address) and watch the color of the bubble. If it's green then you are using SMS.

Hello, I have been having some trouble with my mac after i bought it and used Migration Assistant, i.e. not being able to install some applications, such as adobe flash player. Anyone know a solution? Thank you!

I really wish someone could help me.
Thank you.

Reinstalling OS X won't help you unless you erase the drive and reinstall from scratch. To do that you want a backup of your files so they won't be lost. If you can do that, then:
Install or Reinstall Mavericks or Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
Now, after the successful first startup you will be in the Setup Assistant. Be sure you give your new admin account the same username as the one on your backup. When you get to the Desktop I suggest you install Flash from the download link I gave you earlier. Open Safari and see if Flash is now working for you. I recommend you reinstall only your data at this time. Redownload and install any third-party software you use. Be sure you get only the most recent versions and that they are compatible with Mavericks - App Compatibility Table - RoaringApps.

Having some problems with Apple Pro Res 422 HQ and Hard Drives

Hey,
I've been having trouble when digitizing video via Apple Pro Res 422. First off I'm using a macbook pro 2Ghz intel core duo/2GB of Ram and my hard drive is pretty much almost full. I've set my scratch disks to a Lacie 1TB drive via USB 2.0. Second of all during the Apple Pro Res 422 capture process in the middle of capture it says that my Internal Drive is almost full and won't let me continue on with capture. I don't get it because everything in the scratch disks are set to my Lacie Drive.

My Lacie has 1 firewire 400 and 2 firewire 800 ports but my computer is an early macbook pro that only has 1 firewire 400 port and 2 USB ports. So yea it kinda of stinks but could you recommend a eSata Express card?
Message was edited by: Final Cut Pro 4.5

I am having some trouble with Adobe Flash Player

I have tried to record an audioboo and when I press record the Adobe Flash Player comes up and asks to allow the mic etc... I set it up to allow but then can't close the box!? I have tried lots of times and it just won't close and hence I can't record the boo. I don't have a problem closing the flash player any other time and I have in fact recorded audioboo's before, but for some reason I can't now? Any help or advice would be great.

I have the exact same issue - but the funny thing is that it is only on my iMac - my MacBook Pro is fine and they both have 10.7.2 and the same latest Flash Player, so I think it might be a hardware problem to be honest.
Ever since upgrading to Lion my iMac has been that way - my MacBook Pro had the problem with the first update from Adobe but after the second update of the Flash Player everything is fine on the MacBook Pro.
How old is you MacBook Pro?

Having some troubles with annotations, hyperlinks, images within PDFs

Hello all.
I am having a few issues with my PDFs and I hope that someone can assist me.
First, I want to state that we are using LCES2 SP1, with Workbench, Designer, Workspace, PDF generator and Reader Extensions. We do not currently have Output.
Situation:
I have created several forms in Designer that present the user with information from an XML submitted via a .net app. The info includes customer data, URLs to other pages and a URL to an image/s which I embed within the PDF for presentation.
In addition to the customer data, the forms present one or more embedded images from the XML which are different every time(dynamically embedded in form). We also present several URLs from the XML which I have hyperlinked. We also need to capture Annotations/markups on the PDF.
I have the dynamically populated images displaying correctly to the user. Annotations and the hyperlinks are basically functioning correctly as well.
My issues:
The problems that I have encountered are:
1. The embedded images that are presented do not show the annotations on them. It seems as though the annotations are marking on the PDF behind the embedded images. For example, if I draw a line across the PDF, the line is there but will not show on the actual images. Is there a way to push the images back and bring the annotations etc in front?
2. The hyperlinks work correctly except that when we open the PDFs in Workspace, the hyperlinks open the page within the Workspace area. Is there a way to force the Hyperlinks from Workspace to open the page in a new browser tab or page? I have attempted to use the target="_blank" with no success.
3. The annotations are being captured and collected ok within LC. I can see the updated XML which includes the markups etc. I have attempted to then use the updated XML to present the PDF, including the annotations, to the next user in the TaskAssignment. Even using Reader Extensions, the annotations/drawings do not display to the next user in their Task. However, if I open the same document using Acrobat Pro, the annotations are displayed correctly. Anyone have an idea what I am doing wrong? Do we require the use of Output to flatten the document with the annotations?
Thank you all for your assistance
David

Hi,
three years later I have the same problem as David posted in no. 1.
I created a PDF form in LCD with image fields and text fields that are filled within another software. In LCD I placed the fields in the background. After the pdf fields have been filled within the other software the user wants to add markups and comments on it.
But the markups on the PDF appear behind the images and texts. I need the markups in front, how can I manage this??
Best regards,
MiHue

I'm having some troubles with videos transferring

I just bought a Ipod video 30gb. I can transfer songs and photos but not videos. in Itunes i see my videos but i seems like it doesnt transfer on my ipod, and also i transferred videos in .mp4 (as suggested) and Itunes doesnt even show them to me when i want to add them to my library.
I'm kinda lost here can somebody help please!!

as for transfer your video to your iPod make sure "automatically update all videos" is selected.
and as for your other question what did you use to convert the files? i have had troubles converting files with Quicktime. it doesn't always seems to work.

Having some trouble with importing audio and editing it in iMovie (iLife '11)

Hey guys. Hopefully some of you will be willing to help me with my problem.
Basically I have a video that I've imported into iMovie just fine, and I have a separate audio file that I want to lay over the video. I've figured out how to do this (throw the audio clip into iTunes, then import audio from the iTunes library browser within iMovie). My problem is that I want to have the audio clip I've imported from iTunes come in at a certain point on my video clip, and I want to completely mute the video's sound so that I can ONLY hear the audio clip I've imported from iTunes when that starts playing.
If anyone can help me on how to do this, or if I was confusing and anyone needs clarification please let me know and I'll do my best to replay as quickly as possible.
Thank you very much for any and all input!

Drag your audio track from the Music Browser directly onto the point on your video clip where you wish the audio to start. Don't drag it into the background, but onto the clip thumbnail in your Project. I'm assuming that you have already created a Project and dragged clips from the imported Event. All the editing has to be done in the Project - not the Event.
You will now see a green bar (ribbon) beneath the clip thumbnails, representing the inserted audio. If you click on the small waveform icon at the lower right below the Project thumbnails panel, the audio waveforms will appear (coloured light and medium blue).
You can slide the audio back and forth. You can trim the ends by hovering the playhead (red vertical line) over either end of the green bar until you see a cross-hair icon - click and drag inwards or outwards (subject to audio being available at either end). You can also click on the small gear icon at the start of the audio track and select Clip Trimmer - here you can trim the ends by dragging the yellow handles whilst viewing the corresponding video.
You can split the audio - place the playhead at the proposed split point on the highlighted audio track, right-click (or Control-click) and select Split Clip from the pop-up menu.
If you click on the small gear icon at the start of the track, you can select the Clip Inspector. Click on Audio Adjustments. Otherwise just double-click the green bar and select Audio from the Inspector. In the Inspector you have many choices for editing audio, such as, volume levels, ducking, fading, enhancement, equalizer settings and so on.
You can mute the original audio by double-clicking the video track (or using the gear icon), then reducing the volume in the Inspector's Audio tab. Another way is to use the Ducking feature. Open the Inspector for your added audio track and move the Ducking slider to the zero position - this will mute all other tracks running in parallel with the track you've inserted.
You can easily fade audio tracks in and out without using the Inspector. Open the waveforms by clicking on the waveform icon (as described earlier). At each end of an audio track you will see a small greyish coloured box as you hover over that area. Click and drag as far as you want to create an audio fade. As you do this you will see the waveforms drop in volume.
You can also select sections of audio in the audio track. In the bottom half of the audio track (with waveforms selected) click and drag to surround the selection with a yellow border. Now you can click on the volume line to adjust the volume up or down for that section. Drag the yellow dots to extend or reduce the fade on either side of the selection.
Hope this helps! I think I've covered the essentials.
John
Message was edited by: John Cogdell

Having some trouble with my new 160 gb Classic

Hello all!
I recently purchased a new 160 gb classic. I synced it with iTunes and had no problems, all my music transferred fine. Now, I'm having a weird issue. My iPod is set to automatically sync. I want it to be set to manually sync so that I can erase songs from my library after they are on the iPod. I do this, and it works after I click apply, but then it goes wrong. I try and sync songs manually by dragging them to the iPod and it tells me the sync faild and to disconnect, reconnect, and try again. I eject my iPod from itunes and it leaves iTunes, but the screen still says Connected, do not disconnect. It never changes to the Okay to Disconnect screen. I disconnect the ipod anyway, and then if I plug it back in, iTunes doesn't recognize it. If I quit iTunes at this point, it will not re open. I have to Force Quit it and after I do, it still won't open. The only way to fix it is by restarting my laptop. When I do this, iTunes recognizes the iPod again, but it is set to automatically sync, starting my problem all over again. Does anyone have any idea what I can do?

In your iTunes Preference->Devices
     Tick ON - Prevent iPods, iPho... from syncing automatically.
     Click OK
Then in your Device Summary, -> Options
     tick ON - Manually Manage Music and videos.
Good Luck!

Trouble with Pro Application Support 4.0.1

I'm running FC Studio 2 on a G5, OS X 10.4.10.
After installing this update the following problems:
Aperture won't launch
Qmaster won't launch
Batch Monitor won't launch
...that's as far as I went...
Eventually replacing ./System/Library/PrivateFrameworks/ProKit.framework with my backup version cured the problem.

If you don't have a backup you can download an older copy and install following instructions provided by member hilofoz.
http://discussions.apple.com/message.jspa?messageID=5053515#5053515
This involves permissions changes you may not want to make.
Another option, which is preferable, is to use Pacifist and your FCS 2 installer DVD.
This will install with correct permissions.
Use Pacifist to open the "Install Final Cut Studio" package alias.
When asked to insert "Audio Content 1" choose Skip.
FInd "Contents of ProAppRuntime.pkg" in the list.
Twirl down disclosure triangle.
Go to System/Library/PrivateFrameworks/ProKit.Framework
HIghlight this "ProKit.Framework" folder and choose Install from the top of the Pacifist window.
When" Install Prokit.frsmework" opens make sure "Use Administrator Privileges" box is checked.
Click install.
Choose "Replace"
A window will open with "FIle Already exists"
Click the box to choose "Don't ask again ..."
Click on "Replace"
When installation is finished, close Pacifist, unmount you DVD, and repair disk permissions.
You're done.

Having some trouble with hidden and checkboxes on tabular forms

My query is as follows:
select distinct tt.name tasktype,ct.name costtype,htmldb_item.checkbox(3,1,NULL,'Y:N',':') "Add Cost", htmldb_item.text(4,defabscost,9) defabscost,
htmldb_item.hidden(5,tt.tasktypeid) tasktypeid, htmldb_item.hidden(6,ct.costtypeid) costtypeid
from acct.defabscost d
inner join work.tasktype tt
on d.tasktypeid = tt.tasktypeid
inner join acct.costtype ct
on d.costtypeid = ct.costtypeid
I have it wrapped within a function, which works fine. My issues are that I want to have the checkboxes function as row selectors. Basically, not pointing to primary keys (I have a compound primary key on this table). If selected, fill in the table, if not selected, erase from table. Also, My hidden items kinda contain the "primary keys". When I set these as hidden, I see the column, but there is no data. I don't want to see the columns at all, but when I set these to "hidden" in the attributes, I can't reference them with htmldb_application.g_FXX. Any suggestions?

I actually figured out how to get the htmldb_item.hidden part working properly. I misread the guide, thought it was a comma between fields and not a concatenation. Works fine. But I still need to get the checkbox to work like I want.

Having some trouble with Apple Application Support...

Similar Messages

Maybe you are looking for