Having to update apps more than once

When I launch the app store (Lion 10.7.1) and go to updates, it shows me which apps need updating so I proceed to update.  After installation I quit the app store but if I launch the app store again, say 10 minutes later, the very same apps are listed as requiring an update.  This happened 3 times for one app!
Is anyone else having this issue and is there a fix?
Many thanks
Mark

When I launch the app store (Lion 10.7.1) and go to updates, it shows me which apps need updating so I proceed to update.  After installation I quit the app store but if I launch the app store again, say 10 minutes later, the very same apps are listed as requiring an update.  This happened 3 times for one app!
Is anyone else having this issue and is there a fix?
Many thanks
Mark

Similar Messages

  • Unable to deploy App more than once, ClassLoader Issues

     

    Here is a way to solve your problem.
    try to use
    Runtime.getRuntime().load(absolute_library_path);
    However, make a copy of the library you tried to load and name it uniquely such
    as
    append the current miliseconds.
    After completed loading the library into the Runtime, new File(new_library_path).delete();
    or you can try to use deleteOnExit() (createdTempFile instead).
    "Bob H" <[email protected]> wrote:
    >
    I am working on a project that relies on the SAP Java Connector (JCO).
    This "connector"
    consists of a JAR containing some Java classes, and some native platform
    libraries
    (i.e. DLLs for Windows). The problem is I can only deploy the application
    once
    on a running WL Server 7.0 node. If after the first deployment I remove
    the application
    (via the WL server console) and try to redeploy, deployment works fine,
    but the
    JVM will not be able to load the SAP JCO stuff... if fails on calling
    the native
    library with an ExceptionInInitializerError:
    java.lang.ExceptionInInitializerError: JCO.classInitialize(): Could not
    load middleware
    layer 'com.sap.mw.jco.rfc.MiddlewareRFC' Native Library C:\WINDOWS\system32\sapjcorfc.dll
    already loaded in another class loader
    Based on this error message it appears that the class loader created
    for the previous
    deployment still exists (even though the application is no longer deployed),
    and
    therefore still has a hold on the native library (which apparently can't
    support
    multiple processes).
    What I have to do is stop the server, start back up and then redeploy.
    This is
    a very exhausing ordeal during development, and also leads to a not-very-flexible
    situation for production.
    Does anyone know if there a way to terminate this other classloader instance
    while
    the server is running?
    Thanks,
    Bob

  • TS1702 why can't i update the app more than 50mb from itune but can throught wifi?

    I tried to update Apps more than 50mb through itune, but found the Apps which are needed to be update are mark "Downloaded" in iTune store.  Of course if the Apps mark "Downloaded" are not able to do anything with it.  On the other hand, I can simply use wifi to update the Apps, more than 50mb, throught my iphone instead of iTune.  Is there any problem with iTune or something wrong with my phone?

    In the App section of your itunes library ( NOT the sync pages) there is a button at the bottom which says Check for updates

  • Since I updated to iCloud, Mail on my MacBookPro 10.6.8 has been unable to connect to MobileMe more than once or twice per day. Mail on my iPhone 4 has no problems. What's wrong?

    Since I updated to iCloud, (which may or may not be related) Mail on my MacBookPro 10.6.8 has been unable to connect to MobileMe more than once or twice per day. Mail on my iPhone 4 and my old iMac has no problems. When there is no service a yellow warning triangle appears adjacent to the Inbox and Connection Doctor reports,"Trying to log into this MobileMe IMAP account failed. Verify that username and password are correct."  Since it does fetch Mail from time to time they cannot be wrong.... can they? Should I update to 10.7 and if so what does that entail?

    You have been using MobileMe's email settings, which sometimes continue to work for a time after migration but then get turned off. iCloud's mail server settings are different. Strictly speaking Lion 10.7.2 is required for iCloud, and on that Mail is set up automatically.
    Snow Leopard cannot access most of iCloud's facilities, however you can set Mail up manually to access your email. The method is described here:
    http://www.wilmut.webspace.virginmedia.com/notes/icloudmail.html
    The situation with iCloud and Snow Leopard is described in detail here:
    http://www.wilmut.webspace.virginmedia.com/notes/icloudSL.html

  • HT1918 I'm having some issues trying to change my account billing---I have a new debit card and i need to punch in the new number but when i go to edit my info itunes says my 'session has timed out.' i've logged in and out more than once. what's the probl

    i'm having some issues trying to change my account billing---I have a new debit card and i need to punch in the new number but when i go to edit my info itunes says my 'session has timed out.' i've logged in and out more than once. what's the problem?

    Try to change the credit information from your iphone or other ios device. Tap on settings > store > tap Apple ID > tap view account > tap payment information > change

  • TS1468 I am having trouble with two cover flows duplicating themselves more than once, is there anyone out there that can help me with this, they are not duplicated in my itunes library, just the ipod.

    I am having trouble with two cover flows on my IPOD, duplicating themselves more than once, they haven't duplicated themselves in my Itunes library, just the ipod, could anyone have any ideas on how I could fix this problem. I have tried so many times, even if I restore the ipod, it still does the same thing. Please if possible email me at [email protected] with any suggestions.

    Aha! I have sorted it.
    For those with similar problems, the solution is this:
    Macintosh HD > Library > Audio > MIDI Drivers
    Then delete DigiDioMidiDriver.plugin

  • When i put an app on m my iphone to show in lock screen it rings more than once

    when i put an app on m my iphone to show in lock screen it rings more than once

    When I go to settings/ notifications and select an app's notification and select on in the "view in lock screen* the msg tone rings more than once but when I turn it off it ring once.
    What should I do to make the msg appears in lock screen but only notify me once

  • Load rule to update alternate hierarchy with shared members more than once

    I have a aso cube with an alternate hierarchy that is not stored because the shared members appear more than once. Below is how my alternate hierarchy looks.
    Dept
    Class
    VolumeLevel
    StoreNum
    where StoreNum is the shared member.
    I build the cube using eis every weekend. The VolumeGroup changes everyday, so I was thinking of using a sql load rule to update the outline everyday. Assuming that the data and the aggregation does not get cleared. Is it possible to do it using sql load rule?
    Thanks,

    You can check here if you are satisfying the conditions for creating shared members under the Hierarchy (refer to Alternate Hierarchies). Plz note that rules for shared members are different in ASO world.
    http://docs.oracle.com/cd/E17236_01/epm.1112/esb_dbag/frameset.htm?acrtapdb.html
    Otherwise there is no reason why you should not be able to create a shared member.
    I am able to create a hierarchy using a sample file like this ->
    EN_MAIN, EN_500000
    EN_500000, EN_49999
    EN_ALT, C_500000
    C_500000, EN_49999
    ENTITY (Multiple Hierarchies Enabled)
    |-EN_MAIN (Stored)
    |--EN_500000
    |---EN_49999
    |-EN_ALT (Stored)
    |--C_500000
    |---EN_49999 (Shared)
    The rule file has only "Allow Property Changes" on.
    Thanks,
    Sunil

  • I have ipad 2 16gb wifi, recently it starts autorestart and crashs out of games and apps, more than 20 times aday- tried to restore, updated to the latest 7.0.4 but still the same problem

    i have ipad 2 16gb wifi, since 3 months it started to autorestart and crash out of games and apps, more than 20 times aday- tried to restore-install as new ipad- soft and hard reset-, updated to the latest 7.0.4 but still the same problem
    plz help....

    Vinayaka-
    After all you've tried, Dah*veed is probably right about needing warranty assistance.
    But first check to be sure Settings-Airplane Mode is set to OFF, and Settings-WiFi-WiFi is set to ON.
    Try unplugging your WiFi router for a few seconds.  Then reset the iPad's network.  Go to Settings-General-Reset-Reset Network Settings.  You will need to reconnect to your WiFi.
    Fred

  • Document contains some order item more than once - invoice verification

    Hi,
    we have one cross company stock transfer process in which when a billing is created in SD side, an IDOC will be triggered automatically and create an invoice verification at the MM side.
    The problem is some of our billing of this process having an IDOC application error that said.
    Document contains same order item more than once
    Message no. M8321
    Diagnosis
    Under the following circumstances, you can settle an order item in an invoice received via EDI more than once:
    - Goods-receipt-based Invoice Verification has been defined for the order item.
    - The IDoc contains the delivery note numbers of the goods receipts.
    System Response
    If this is not the case, the system cancels posting of the IDoc.
    Question:
    1 - The funny thing is IDOC showing 51 IDOC error code message on status record of INVOIC. But the invoice verfication get created in PO history.
    2 - I think this error is because we need to make the PO as GR-based Inverifcation. We have flagged it in Vendor master, and Info record, but this indicator is not flag automatically in the PO (and we cannot manually change the PO as this indicator is grey-out). How?
    3 - how to solve this error?
    Thanks

    Once PO history is created, you cannot change the "GR-based-IV" flag. Two options are there before you.
    1. Cancel all the GRs & Invoices posted in the STO then system will allow you to update the GR-based-IV flag. After updating this flag repost the GRs and invoices.
    2. Create a new STO, now since you have updated the vendor maser & info-record, this flag will automatically get updated during the STO creation itself.
    First option is tedious and should be selected only if you can go option 2 is not at all feasible

  • Tried to set up shared memory more than once?

    Hi all,
    Im getting a pop up error on 10.7.3.. It pops up very fast and is almost impossible to read.
    Having checked the console, this is the error..
    01/04/2012 13:59:12.457 com.apple.launchd.peruser.501: (com.facebook.videochat.'MyName'.updater[486]) Tried to setup shared memory more than once
    (Ive edited out my name from the string..)
    Can anyone tell me how to fix this?
    Thanks!

    I think this is a bug in some facebook-related software you have installed.
    Maybe update facebook stuff.

  • I'm unable to install the newest version of itunes on my pc, the promt says that there is a problem with the windows installer package, but I have downloaded the exe more than once. Is anyone able to help?

    I'm unable to install the newest version of itunes on my pc, the promt says that there is a problem with the windows installer package, but I have downloaded the exe more than once. Is anyone able to help?

    Yes, I had found a similar solution also.  I'm running XP Pro, SP3.  I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair.  Then run the 10.5 exe.
    While the programme updated from version 8 of iTunes, my new iTunes is now a mess.  Not all of my music was in the same folder previously but it all showed up on iTunes.  Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing.  I haven't begun to work on that.

  • Trigger firing more than once

    Can any one help me i am having the problem with trigger . The trigger fires more than once. I want the trigger to be fired for every COMMIT and not for each row.
    The pl/sql used for populating the table in given below
    CREATE OR REPLACE TRIGGER REFRESH_MV_TRIGGER
    AFTER INSERT OR UPDATE ON CONTACT_HISTORY
    DECLARE
    cnt NUMBER;
    BEGIN
    IF ( INSERTING ) THEN
    dbms_output.put_line('INSERTING');
    END IF;
    IF ( UPDATING ) THEN
    dbms_output.put_line('UPDATING');
    END IF;
    END;
    DECLARE
    BEGIN
    FOR i IN 1..2 LOOP
    INSERT INTO CONTACT_HISTORY(TARGET_ID,CAMPCODE,COMMSTAGE,CUSTOMER_KEY,solicit_dt)
    VALUES(i,'CAMP4','COMM1',i,SYSDATE);
    END LOOP;
    COMMIT;
    END;
    sql> output when i run pl/sql block
    INSERTING
    INSERTING

    I am not shure what you need exactly but maybe this might help:
    CREATE TABLE dept (
      deptno NUMBER(2) PRIMARY KEY,
      dname  VARCHAR2(14),
      loc    VARCHAR2(13)
    CREATE TABLE dept_history (
      deptno NUMBER(2),
      dname  VARCHAR2(14),
      loc    VARCHAR2(13)
    CREATE MATERIALIZED VIEW dept_mv
      BUILD IMMEDIATE
      REFRESH ON COMMIT
      AS SELECT * FROM dept
    CREATE OR REPLACE TRIGGER bir_dept_mv
      BEFORE INSERT ON dept_mv
      FOR EACH ROW
    BEGIN
      INSERT INTO dept_history VALUES (:NEW.deptno, :NEW.dname, :NEW.loc);
    END;
    INSERT INTO DEPT (deptno, dname, loc) VALUES (1, 'D1', 'L1');
    1 row created.
    INSERT INTO DEPT (deptno, dname, loc) VALUES (2, 'D2', 'L2');
    1 row created.
    SELECT * FROM dept;
        DEPTNO DNAME          LOC
             1 D1             L1
             2 D2             L2
    SELECT * FROM dept_history;
    no rows selected
    SELECT * FROM dept_mv;
    no rows selected
    COMMIT;
    Commit complete.
    SELECT * FROM dept_history;
        DEPTNO DNAME          LOC
             1 D1             L1
             2 D2             L2
    SELECT * FROM dept_mv;
        DEPTNO DNAME          LOC
             1 D1             L1
             2 D2             L2Regards,
    Zlatko Sirotic

  • Why would aperture load more than once?

    I understand that when I first load my RAW photos into Aperture it needs to generate a preview and so that's why it slows down and shows me "loading...". If I want to bypass this I can use quick preview mode. That's how I understood it so far. But I don't understand why it would need to load again at a later time? If I browse elsewhere and come back to this project, it'll start loading again. Does Aperture for some reason deletes the preview?

    1) How do I force aperture to generate preview for everything, and not one by one. I'd rather go away and let the computer do its thing for a while than get disturbed every time I hop to the next photo.
    You can select all images in the Browser and use the command "Photos > Update/Generate Previews" (Update will turn into "Generate", if hold down the ⌥ alt/options key). This way you can generate the previews over night.
    2) Also this still doesn't explain why it needs to be done more than once? Why would it generate the preview again if I haven't changed any adjustments etc?
    It will only keep and store the preview permanently, if you have enabled the sharing of previews in the "Preferences > Preview" tab. If you do not enable this, Aperture will not store the previews, to save space.

  • Weblogic.management.server bound more than once?

    Sorry if I already posted this in cluster, but I realized that it should belong here instead....
    I have an admin server that does not belong in any cluster. I set up 2 managed server (app01,
    app02) targetted to "app cluster". I can start up app01 or app02 by itself, when when I start both
    up, I get the following message on both managed servers; the admin server, on the other hand, does
    not display any errors. Why are the managed servers trying to bind weblogic.management.server to
    jndi????
    <Apr 3, 2001 11:07:37 AM PDT> <Info> <Cluster> <Adding
    server -4094822875006454559S:fortran-1:[10085,10085,7002,7002,10085,7002,-1] to cluster view>
    <Apr 3, 2001 11:07:37 AM PDT> <Info> <Cluster>
    <Adding -4094822875006454559S:fortran-1:[10085,10085,7002,7002,10085,7002,-1] to the cluster>
    <Apr 3, 2001 11:07:38 AM PDT> <Error> <Cluster> <Conflict start: You tried to bind an object under
    the name weblogic.management.server in the jndi tree. The object you have bound
    weblogic.management.internal.RemoteMBeanServerImpl from fortran is non clusterable and you have
    tried to bind more than once from two or more servers. Such objects can only deployed from one
    server.>
    <Apr 3, 2001 11:07:38 AM PDT> <Error> <Cluster> <Conflict start: You tried to bind an object under
    the name weblogic.management.server in the jndi tree. The object you have bound
    weblogic.management.internal.RemoteMBeanServerImpl_WLStub from fortran-1 is non clusterable and you
    have tried to bind more than once from two or more servers. Such objects can only deployed from one
    server.>
    <Apr 3, 2001 11:07:38 AM PDT> <Error> <Cluster> <Conflict start: You tried to bind an object under
    the name weblogic.management.adminhome in the jndi tree. The object you have bound
    weblogic.management.internal.AdminMBeanHomeImpl from fortran is non clusterable and you have tried
    to bind more than once from two or more servers. Such objects can only deployed from one server.>
    <Apr 3, 2001 11:07:38 AM PDT> <Error> <Cluster> <Conflict start: You tried to bind an object under
    the name weblogic.management.adminhome in the jndi tree. The object you have bound
    weblogic.management.internal.AdminMBeanHomeImpl_WLStub from fortran-1 is non clusterable and you
    have tried to bind more than once from two or more servers. Such objects can only deployed from one
    server.>
    Gene

    Prasad diagnosed the problem. Look in clustering under the same title if you're interested!
    Gene
    "Gene Chuang" <[email protected]> wrote in message news:[email protected]...
    Sorry if I already posted this in cluster, but I realized that it should belong here instead....
    I have an admin server that does not belong in any cluster. I set up 2 managed server (app01,
    app02) targetted to "app cluster". I can start up app01 or app02 by itself, when when I startboth
    up, I get the following message on both managed servers; the admin server, on the other hand,does
    not display any errors. Why are the managed servers trying to bind weblogic.management.server to
    jndi????
    <Apr 3, 2001 11:07:37 AM PDT> <Info> <Cluster> <Adding
    server -4094822875006454559S:fortran-1:[10085,10085,7002,7002,10085,7002,-1] to cluster view>
    <Apr 3, 2001 11:07:37 AM PDT> <Info> <Cluster>
    <Adding -4094822875006454559S:fortran-1:[10085,10085,7002,7002,10085,7002,-1] to the cluster>
    <Apr 3, 2001 11:07:38 AM PDT> <Error> <Cluster> <Conflict start: You tried to bind an object under
    the name weblogic.management.server in the jndi tree. The object you have bound
    weblogic.management.internal.RemoteMBeanServerImpl from fortran is non clusterable and you have
    tried to bind more than once from two or more servers. Such objects can only deployed from one
    server.>
    <Apr 3, 2001 11:07:38 AM PDT> <Error> <Cluster> <Conflict start: You tried to bind an object under
    the name weblogic.management.server in the jndi tree. The object you have bound
    weblogic.management.internal.RemoteMBeanServerImpl_WLStub from fortran-1 is non clusterable andyou
    have tried to bind more than once from two or more servers. Such objects can only deployed fromone
    server.>
    <Apr 3, 2001 11:07:38 AM PDT> <Error> <Cluster> <Conflict start: You tried to bind an object under
    the name weblogic.management.adminhome in the jndi tree. The object you have bound
    weblogic.management.internal.AdminMBeanHomeImpl from fortran is non clusterable and you have tried
    to bind more than once from two or more servers. Such objects can only deployed from one server.>
    <Apr 3, 2001 11:07:38 AM PDT> <Error> <Cluster> <Conflict start: You tried to bind an object under
    the name weblogic.management.adminhome in the jndi tree. The object you have bound
    weblogic.management.internal.AdminMBeanHomeImpl_WLStub from fortran-1 is non clusterable and you
    have tried to bind more than once from two or more servers. Such objects can only deployed fromone
    server.>
    Gene

Maybe you are looking for