Having trouble with variables followed by a period in user defined reports.
Using SQL Developer 1.0.0.15 on XP.
The DB is Oracle 10.
Having trouble with variables followed by a period in user defined reports.
select * from &OWNER.TABLE_NAME
I noticed that the "Data Dictionary Reports" use :OWNER
So I have tried all sort of variations:
select * from :OWNER.TABLE_NAME
select * from :OWNER\.TABLE_NAME
select * from ":OWNER".TABLE_NAME
select * from ':OWNER'.TABLE_NAME
select * from (:OWNER).TABLE_NAME
And every other variation I can think of. This is a simple example, but all my reports need the owner of tables as a variable.
I assume this is simple, I just have not hit the right combination.
Thanks -
Dyer
Use two points ..
select * from &OWNER..TABLE_NAME
Similar Messages
-
I am having trouble with my mac mini ethernet. It had been working for weeks after an update to SL 10.6.8.
Once it went out and i repaired it by defining a new connection from System Preferences ->Network->(left panel service, +).
But yesterday, after a power up. my ethernet was not working again. I tried this old trick to repair it, but the interface choices
listed for '+' a new service did not include Ethernet any more. And the Utilities->System Profiler->Ethernet Cards shows
no ethernet available.
As a last ditch effort i reloaded my original SL from DVD. (I think it was version 10.6.4 but i could be mistaken on the version).
The ethernet worked! But KeyNote wasn't going to work because apparently the version i purchased depends on 10.6.8.
So I upgraded again to SL 10.6.8 (Plus some other updates like AirPort which i don't use).
Now the Ethernet is not working again. I see the same symptoms as before with the Ethernet seeming not installed.
Is this a problem seen by others?
Would going to Lion fix the problem?
Could AirPort actually be the culprit and not SL?
If i stay with my original SL, would i need to repurchase a version of KeyNote for the older version of SL?Have you reset the SMC?
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
While you're at it, resetting the PRAM won't hurt anything and 'might' help is SMC reset didn't work (PRAM does some port control):
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Something else you might try .... you don't say how you're updating to 10.6.8, however, if you're using Software Update, you might try downloading the 10.6.8 combo update, which contains all updates to 10.6. Sometimes, Software Update doesn't work quite right, and installing the combo update fixes that. Download the update from Apple's download site at http://support.apple.com/downloads/ , using Disk Utility repair permissions, apply the combo update, then repair permissions again. -
I am having trouble with the following....
I just received a CD that has Adobe Elements 2.0 which is compatible for both mac and microsoft. Whenever I try to install this outstanding program, it says the following:
*A Valid Classic Environment Was Not Detected.*
Support for running an Adobe application as a Classic application will not be installed. To add Classic support, specify a classic environment, then rerun the installer.
Then I read the *How to install read me* and it says:
To install Photoshop Elements in Mac OS:
IMPORTANT: If you choose to install Adobe Photoshop Elements in OS X, a warning message may appear to alert you that no Classic volume is selected. If so, quit the installer and go to System Preferences Classic. Select the volume on which your Classic environment is installed, and then quit the System Preferences and begin installation again. (If you don't have a Classic volume, the Photoshop Elements installer will alert you that no Classic environment is installed, and you will only be able to run Photoshop Elements in OS X native mode.
I would very much appreciate if someone were to take the time, and clarify this for me.
Thank you.Not only will the Classic environment not work in Leopard, it won't work on any Intel-based Mac regardless of the version of Mac OS X. As Larry said, you will need a newer version of Photoshop Elements.
-
I have a new MacBook Pro and I'm having trouble with some of the Help sections. I want to rearrange the order of my photo's within an Event. I have followed the directions but it will not let me do it, what am I missing? Thanks for any tips.
Are you talking about iPhoto? If you are please post this in the iPhoto forum, thanks!
-
I have a Mac, IPad, I phones, and 2 Windows Vista Pcs and I'm having trouble with the Windows Laptop staying connected. I have to re-boot after an extended period of time please help. Thanks!
I have a Mac, IPad, I phones, and 2 Windows Vista Pcs and I'm having trouble with the Windows Laptop staying connected. I have to re-boot after an extended period of time please help. Thanks!
-
hi everyone , having trouble with restoring my iphone, i did follow the step untul extracting the update software but when the iphone start to restoring my iPhone always turn off and it say Error 21 on my PC monitor ...please help me i cannot get my iPhone turn on
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service. -
I have a factory unlocked 4s I'm having trouble with the mms with straight talk I've been useing the sim swap system with tmobile i have put the settings in five times. The setting won't stay it works for a while and then it's gone. I'm not in a good coverage area but when i put the settings in i make sure i'm getting a good signal or near wifi. any suggestions would be great.
Congrats on your recent upgrade actionkatie! I am sorry to learn of the difficulties you are experiencing with your Samsung Galaxy S4. Let's get to the bottom of this because we want you to love your phone.
I understand you have done all necessary troubleshooting steps that should have enabled you to send messages to iPhone users without them having to disable iMessage. Have you tried contacting Apple Support regarding the inability to send a text message to iPhone users? Apple can be reached at (800) 275-2273.
In addition, do you get a certain error message when your WiFi stops working? Have you verifed that Auto Switch network is disabled? To disable this setting simply to go Settings > Wi-Fi > Tap the Menu Key(to the left of the home button) > Select Advanced and it is called `Auto network switch. If you are still experiencing difficulties, please feel free to reach out to us for further assistance.
Thank You,
MichelleL_VZW
VZW Support
Follow us on Twitter @VZWSUPPORT -
having trouble with ringtone and ringback tones ..i followed all directions for home sharing. does anyone have a real solution???
Hello sairdoor123
From what I understand the issue seems to be with the hardware, obviously since the phone was dropped that could cause undesired results.
If all your data is backed up to a computer then I would recommend doing a hard reset: http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=887
If a hard reset is done then I would caution you with the following choices: ( Should I have the audio circuit repaired as suggested by one of the repair guys? Or would that be risky?) - I would say this is risky because the person repairing the devise could easily sodder the wrong part of the hardware.
If you really do think repairing the circuit board is more cost effective then I would recommend researching all your possible repair shops before doing any work. Make sure they have the credentials and experiences.
Hopefully things work out for you.
Post relates to: Centro (Sprint)
Post relates to: Centro (Sprint) -
I am having trouble with app updates on my iOS 5 iPhone never getting beyond the "waiting" state.
I am having trouble with app updates on my iOS 5 iPhone never getting beyond the "waiting" state. I have tried signing out/in of my account, rebooting and removing/re-installing the apps. This started shortly after going to iOS 5 but I am not certain if that is related. All updates that I try now are stuck in "waiting". I also tried removing the apps and then installing via iTunes desktop sync with no improvement. The only thing that I have not tried so far is a restore to a prior iPhone backup. I have not been able to find anything to indciate what the updates on waiting on. There is plenty of space on the iPhone (16gb available). Any suggestions on what to try next?
Hello there, Missy.
First thing I would recommend is to check your downloads queue to make sure there is not an interrupted download per the following Knowledge Base article:
iTunes: How to resume interrupted iTunes Store downloads
http://support.apple.com/kb/HT1725
If your download was interrupted using your iPhone, iPad, or iPod touch
1. From the Home screen, tap the iTunes app.
2. For iPhone or iPod touch, tap More > Downloads. For iPad, tap Downloads.
3. Enter your account name and password if prompted.
4. Tap the blue download arrow to resume.
If you can't complete the download on your iOS device, you can download it in iTunes on your Mac or PC and then sync it to your iOS device. You can also transfer purchases from your iPhone, iPad, or iPod to a computer.
For Apps, you can also try tapping on the application icon to resume the download, as outline in this featured discussion:
App updates won't download on my...: Apple Support Communities
https://discussions.apple.com/thread/4111336
Try tapping the App, so that it changes to Paused instead of Waiting, then tap it again to resume the install.
Make sure you don't have any paused downloads in other apps either, like the App Store or iTunes Store.
If that doesn't do it, try resetting or restoring the iPhone.
via whatheck
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Any one else having trouble with Creative Cloud not opening?
Anyone else haveing trouble with Creative Cloud not opening? All I get is the splash screen and the :loading: symbol that keeps going around and around---forever.
This just started ---.
I am running Windows 8 on an i7 machine with 16 gigs of RAM. My internet connection is good---all other internet access opens just fine.
Thanks
geneHave you downloaded and installed the following updated Mountain Lion compatible driver and software for your model?:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-107723- 1&cc=us&dlc=en&lc=en&os=219&product=4073738&sw_lang=
Hope this helps -
Having trouble with my PHP code. Appers to get stuck on a white page.
HI all,
I have just began having trouble with my PHP code. Was working before and haven't made any changes to the code since last time it worked.
What happens is after the form is submitted it goes to a white page (no text just all white page) and in the address bar it has the path for my php page. what supposed to happen is either it goes to a success page or a error page.
I've had a problem where the info entered is correct but was directed to the error page. i managed to fix that issue but i am puzzled what is happening to my php page now.
Mind you that i didn't write this code i just took over the responsiblities of this website and i am hopping that its a quick fix.
I appreciate any help you could give me. Thank you.
CODE:
<?php
$to = '[email protected]';
$from = '[email protected]';
//Make sure we have some info posted from the form...
if (isset($HTTP_POST_VARS)){
//Clear the body of the message to be sent
$body = '';
//go through all POSTed variables sent
while (list($key, $value) = each($HTTP_POST_VARS)){
if($key <> "Submit" && $key <> "submit") {
$body .= $key . ' = ' . $value . "\r\n";
//Now building mail headers.....
$headers = "From: ".$from."\r\n";
//Mail message
$success = mail($to, "Email Club" . date("m/d/Y"), $body, $headers);
// CURL stuff.....
$ch = curl_init();
curl_setopt($ch, CURLOPT_FAILONERROR, 1);
curl_setopt($ch, CURLOPT_FOLLOWLOCATION, 1);
curl_setopt($ch, CURLOPT_TIMEOUT, 4); //times out after 4s
curl_setopt($ch, CURLOPT_RETURNTRANSFER,1);
if ($success){
//readfile('http://www.lvpaiutegolf.com/thankyou.html');
curl_setopt($ch, CURLOPT_URL,"http://www.lvpaiutegolf.com/thankyou.html");
header("Location:http://www.lvpaiutegolf.com/thankyou.html");
else{
// readfile('http://www.lvpaiutegolf.com/error.html');
curl_setopt($ch, CURLOPT_URL,"http://www.lvpaiutegolf.com/error.html");
header("Location:http://www.lvpaiutegolf.com/error.html");
// Output
//$result=curl_exec ($ch);
//curl_close ($ch);
//echo $result'";
?>Insert the install disk and boot from it. Use disk utitlity to repair your drive and check for errors (report any errors back here) then reinstall the os. This should not erase your data.
-
I am having trouble with a form, won't tab to 2nd page...
I am having trouble with a form I created in Acrobat Pro 10. I created tabs etc, they all work wonderfully in Adobe, but once I uploaded it onto the web-based program for other users, the tabs only work on page 1, I have to click on page 2 to keep tabbing through. It won't tab into it. Any advise? Also, when the users open it it opens in the web.
1. The library is separate from the application, so re-installing shouldn't cause an issue with the actual photos. But it would be foolhardy in the extreme to do anything without first backing up.
2. Often these issues are caused by a damaged Library, so reinstalling doesn't change much.
FWIW
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store you can find it in your Purchases List.
Alternative approach:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
Are people still having trouble with iPhone/HP Laptops?
Since I've had my Envy I've had no end of trouble with getting it and the iPhone to play nice. Any my search continues. So far, I have updated every bios, reinstalled Windows 7/iTunes many times, have restored the iPhone far more times than I care to remember and I am STILL having troubles with this thing. Having got through the Syncing issues with the PM55 chipset and iPhone I can now sync with my laptop. However all is not well as it would seem that I cannot sync my photo's. It doesn't matter if I have 0gb, 15gb or 30gb free, iTunes is telling me that there is not enough memory available. This error seems like an old one and there is even some info in the Apple KB but after following all that I still can't get it to sync my photo's.
Some info on my setup:
HP Envy 15 (all the latest drivers installed, bios F.24) Core i7-820, 8gb ram etc.
iPhone 32gb, ver 3.1.3
iTunes (whatever the latest one is)
I should add that I can sync my iPhone with an identical install of intunes on my vintage Quad core desktop PC, but as I use my Laptop a lot more (and have all my media, email, and contacts etc on it) I would prefer to sync to it.
Is there anything that I can do? Its very frustrating to have blown $4k on this equipment and it doesn't work...Well I tried deleting the photocache but alas, no luck. I also tried syncing with just the photo's enabled, and it worked! So then I enabled my other media and that copied across too! I thought I was on a bit of a roll here, but now whenever I try and sync it will do one of 3 things:
iTunes will crash.
iTunes will indicate that there is not enough memory on the device (+9GB free)
iTunes will remove the iPhone from the sidebar (and my computer/disk management) even though it will continue to charge.
Interesting point to note is that it works fine (cable/iphone/itunes/media library) on my desktop and macbook. Still really disappointed that I cannot get these two to cooperate. Also still haven't got any contacts from outlook but that may not be related? -
I am having trouble with a lot of pop ups and causing websites and screens to roll slowly, firewall is on, how do i prevent this
You installed adware along with something else.
You can either follow Apple's manual instructions for removing it, or use the free automated tool, AdwareMedic. -
Hi, having trouble with my iMac on startup. Background screen appears, but no icons,
Having trouble with my iMac- on startup, the background screen appears, but no icons. The spinning beach ball appears for quite a long while, then when the icons finally come up, when I open a finder window, the only icons to appear are the Network and Macintosh HD icons. I've tried to repair disk permissions: this came up with heaps of errors, which it then fixed, but the original problem remains.
Any suggestions on how to fix this?
thanksPlease read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
Note: If you’ve activated “Find My Mac” or FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Same problem(s) in safe mode?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.
Maybe you are looking for
-
Flash Text and Flash Button options have dissappeared in DW CS4
the Flash Text and Flash Button options have dissappeared in the insert menu in Dreamweaver CS4. They used to be there but not now
-
Address Book creating multiple duplicates!!
My address book keeps creating multiple duplicates for the names in my address book. I have the wireless sync off and I also have no duplicates allowed setting off, but it still creates them. What is going on with my blackberry?
-
Error in Spool to PDF conversion using 'CONVERT_ABAPSPOOLJOB_2_PDF'.
Hi I am sending classical report output from the Spool to PDF using 'CONVERT_ABAPSPOOLJOB_2_PDF'. This is done through a batch job. Step 1 is RVKRED01 report Step 2 is a program that picks up the spool number of step1 and converts the spool to PDF. N
-
If I buy a tv series like Ugly Betty which is not yet out on DVD in uk, can I transfer it to DVD? If so does anyone know the file size of average episode so I know if room on mac/to back up to dvd? Thanks Message was edited by: Angus Mcewan
-
Spry Tooltip ok in CS 4, but not in CS 5
Hi, something very strange has happened! I suddenly have difficulties to use tooltip in CS 5, because nothing happens when I try to insert spry tooltip. Today I tried it with my "old" CS4 AND behold, it worked well! All the tooltip files are stored i