HD video not clear when editing

Hello all.
I have completed a few projects shooting with my HD camera, and all have been imported nice and clear. Now, I am editing and the video is not clear. It is smaller and not filling the entire screen. I must have switched a setting somewhere, but I have no idea what I had it set at.
When editing, the video has a widescreen look to it, and the lines are jagged and blurred. HELP!

Item properties say 29.97 fps, 1440 by 1080 frame size, 3.2 MB/sec, and I am in Final Cut Pro version 7.
I tried RE capturing the SAME clip into an old project, where it came in clear. Then I recaptured into this problem project and it was pixelated. I captured the same way both times. Do I have to recapture the entire thing? I know I am probably not giving as clear responses as you need to help me, but I am new to dealing with HD editing.
It is just this project that is not converting the video to the right size. Usually it will prompt asking if I'd like to match the settings, but this time it didn't and I'm not sure how to do so manually.

Similar Messages

Cache, cookies and history are not clearing when I close Firefox even though they are set to do so and have been for ages

I recently had an update (or upgrade?) for FF 16. Today (and I believe the update was done a day or two ago?) my cache, cookies and history are not clearing when I close FF. Also, certain links are not working. Not links for full web pages but for site pop-ups (like the smilie window on a message board). They worked a few days but are not working today. I click the link and nothing happens. I noticed the problem with the cookies not clearing for a few weeks ago but it was only on one site not all sites which is what's happening now.
My apologies if that's a little confusing. Thanks!

At any rate, have you tried running Firefox in Private Browsing mode? This will ensure that no infromation from your session is saved once you exit Private Browsing mode and/or exit Firefox.
You can set Firefox to always start in Private Browsing mode: https://support.mozilla.org/en-US/kb/private-browsing-browse-web-without-saving-info#w_how-do-i-always-start-firefox-in-private-browsing

Premiere Elements 8 video looks bad when editing

Hi -
I'm brand new to Premiere Elements 8 - in fact just installed it on an HP/Compaq 6530b laptop running Windows Vista (32 bit). Initially, I tried to edit a Flip video (MPG4) and also a Flip video that I converted to AVI. I also have a new Canon Vixia HF M31; regardless of what video I use, the video editing window looks horrible. There's a "double image" - the one on top is heavy green and there's another "double image" of the video below it that looks better but is below the green-shaded video (see inserted image below). I'm wondering if it's an issue with the laptop, especially since multiple video formats have the same problem. Where do I begin to resolve this?
NOTE: I've taken this same video and it looks fine with Windows Movie Maker (at least the MPG4 - haven't tried the Vixia .MTS video yet as I'm guessing it won't work with Movie Maker).
Thanks,
Calvin

Thanks Bill and everyone else. I appreciate all of your thoughtful responses.
I've tried PE8 on my personal desktop PC (though its only a trial b/c my corporation has a license for PE8 but only for PC managed on our network) and things look much better, other than that annoying "Trial version" banner inserted on my videos.
I've render some video of my daughter playing volleyball as a PC-based media file and I'm pretty surprised at all the presets available and how using one of the various MPEG2 or NTCS presets makes a huge difference in the quality of the video. Where can I read more about this? What I do notice is the MPEG2 video looks very clear but is choppy when the camera is moving while the NTSC that I used is a bit pixilated but the video is not choppy when the camera is moving.
In the end, I'm trying to decide if PE8 is for me - this is my first HD camcorder and in the past I was happy with Pinnacle (way back on Version 10); I've heard that really it's down to PE8 or Sony Vegas. I'll keep doing research and I think there's a trial download of Vegas but I always appreciate the advice of experts.
Thanks again!

Accounting document not cleared when billing document is cancelled.

Hi,
In ECC 6.0 when we cancel a billing document through vf11 in vfo3 we find the status as accounting document not cleared.
The general process is manually going to f-23 and clear customer line items of that invoice. After doing this the status become accounting documet is cleared.
My requirement is how to cancel the billing document without getting this message (accounting document not cleared) and not clearing the customer line items manually.
Can it be done through user exit/enhancement or by copying requirement vofm.
Please suggest.
Thanks
Edited by: sumesh on Jul 29, 2009 6:33 PM

They directly want the accounting document to
be cleared when billing document is cancelled.
Though you can achieve this with the help of ABAPer, why dont you consider having a Posting block for your billing type so that as and when the billing documents are generated, you can release it via VFX3 in bulk or VF02 for individual billing document release to FI.
In order to achieve this, go to VOFA, select your billing type and execute. There you can see a field "Posting block" where maintain a tick there and save. With this control, first of all, you can ensure that before releasing F2 billing documents to FI, it is not cancelled.
thanks
G. Lakshmipathi

Iphone 5 video, not smooth when played back in iPhoto?

Why are my videos all 'stop start' when played back in iphoto? Is it something to do with the size of the file it seems to be happening on video shot on 1920 x 1080 which is when I got my iphone. Are hey going to be ok when i place them in imovie?

Sorry, maybe I don't understand or I didn't explain my problem properly.
(I'm doing this project as a hobby so can't really afford external resources)
The demo involves filming industrial equipment, which is being monitored by a PC.
As the equipment runs, graphs and results are produced on the PC.
I managed to capture this, but when importing it into FCP AND playing it back, the picture is not clear. but when I forward frame by frame, each frame is nice and very sharp.
Could it be frame rates or?
I've seen many educational videos that show computer screen shots and I am prepared to pay for software that captures these shots, if that would help.
I don't really know how a "scan" would work.
Or maybe I'm dreaming that I can do this relatively easy.
Thanks for your answer.

Billing document not cleared when processing Payment cards in Sales order

Hi,
I am having an issue with Payment card processing (credit card). We are using SAP R/3 4.7. When I use manual authorization, the status of billing document still shows "A" incomplete. The status shows authorization successful but not settled in billing document.The accounting document when billed shows not cleared.We are not using any interface for credit processing. The authorization check is done outside of the system manually. We are planning to use manual authorization for all such transactions. I am not sure if any specific config is to be done or am I misssing something.
Any inputs in this regard would highly be appreciated.
Thanks!
Sanjay

Hello Sanjay,
Please also check to see if the field VBAP-ABFOR is filled for the line item (This is the Form of payment guarantee). Without this field filled the billing does not know that the item will be covered by payment cards.
VBAP-ABGES (Guaranteed (factor between 0 and 1)) should also be filled with 1.
I hope this helps.
Best regards,
Ian Kehoe

SP2013: OK button not working when editing Settings on List app

Hi, all! Currently running Sharepoint 2013 under Server 2008 R2. My client is Win7 Pro/64-bit running lastest Firefox, Chrome & IE11. I am currently a Domain Admin for our corp domain.
Long story short, I've created a test List app. When I attempt to add a column to the layout of the custom list app, nothing happens when I click the OK button to save the app. No access spinning, no errors on-screen (also none visible when I view
the source of the SP page or header), no nothing. The highlight of the button changes as expected, but nothing else. The Cancel button will Cancel as expected, but OK does nothing whatsoever.
My current permissions include member of Domain Admins, Site Owners (Full Control), and Visitors (Read). A Check Permissions on myself yield the following:
Full Control | Given through the "~site~ Owners" group.
Read | Given through the "~site~ Visitors" group.
Edit | Given through the "~site~ Members" group.
(Note: "~site~" is replacing the actual SP2013 site name above)
I'm thinking it has something to do with effective permissions. I just added myself to the Owners group this morning with no effect. I've also tried both Compatibility mode on and off in IE, and Firefox and Chrome don't work, either. Suggestions
are most welcome as I'm at the point where I'm not sure if IE11 is causing a problem or if it's actually an effective permissions problem that's preventing me from saving any column changes to the List app above.
Thanks, guys!
Steve

Hi Steve,
From your description, my understanding is that OK button does not work when you create a new column.
Please check if you get any JS error after you click OK button by pressing F12 to OP developer tool.
Besides, please try to create a new column with steps below:
1.
Click LIST tab in the Ribbon.
2.
Click Create Column in Mange Views section.
3.
Create your column in the dialog.
4.
Click OK button.
In addition, please confirm these points below:
1.
Test your issue in another list.
2.
Test your issue with another computer.
3.
Test your issue with another account.
Best Regards,
Vincent Han
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

After hiighlighting a word and pasting it into another document, the clipboard does not clear ;when I hit enter it pastes again and again. How do I fix it?

When I highlight a word or phrase and copy to the clipboard, then paste it in another area the clipboard does not clear the phrase. Therefore, every time as I type and hit the enter key it continues to paste the phrase all over my document. I do have the latest download of Firefox installed (16.0, win 7 and that is when this started. How do I stop this obnoxious behavior so I can type a sentence with normalcy?
Louise

Thank you, Iusually do that first thing with any computer problems. Old school computer fix. Hard Boot regardless! lol Thanks again.

HR_INFOTYPE_OPERATION not working when editing HR master data

Hi all,
I search for similar problem but couldn't find any.
I am using HR_INFOTYPE_OPERATION to insert record to an infotype. I proceed with standard way (ENQUEUE employee, call above fm, DEQUEUE employee). It works fine when running as executable program.
Now I want this functionality when editing EE's master data (i.e. modifiying one infotype record). For this I put the same code to some user exit. Now when executed I can proceed with creating new entry, it saves I can see how data are updated in pa30 for this EE. But when I reenter his master data are without this new record anymore.
Does anyone faced similar issue? I guess it is not allowed to use that fm when editing master data, but can't find a answer if this is the issue.
I did also a test creating this new entry for some different EE, but it neither worked.
Any info appreciated.
Thank you
Marcin

Hi Marcin,
Please check whether the following links are useful,
HR_INFOTYPE_OPERATION mod not working
HR_INFOTYPE_OPERATION is not working in user exit ZXPADU02
Best Regards.

Nokia-5230 - Youtube Videos Not Clear

Why the Youtube videos are blurred and not clear (even with normal quality) in my 5230?

Which network operator do you use?

Version Set is not created when editing with Photoshop CS4?

Last week I was working in PSE7 and opening files into PS CS4 for editing. I open the files by clicking the Open with link and choose Photoshop. I edited several dozen photos and when I closed them from PS CS4 Version Sets were created in PSE7 like they should be. At some point that stopped happening. Now when I do as before and open the files into PS CS4, edit them, and then close them the Version Set is not being created in PSE7. I look in the folder containing the files and the file has a new modified date but it still has the same file name instead of being saved with the - edited name as before. Does anyone know why the version sets are no longer being created when editing with PS CS4? I can edit the files with the PSE7 editor and the version sets are created as they should be. Thanks!

Okay so tha there is no misunderstanding here is exactly what I'm doing. From the PSE7 Organizer I select a photo (file name Tetons & Jenny Lake 026.jpg) and click the Fix tab. I then click More Options and select Photoshop. The photo opens in into PS CS4. I make my edits click the x on the tab to close the image and I'm asked "Save changes to the Adobe Photoshop document "Tetons & Jenny Lake 026_edited-1.jpg" before closing?" I click Yes then click OK to save the image at maximum quality. I go back to the PSE 7 Organizer and there is no version set. I check the folder the original image was in and see the original file Tetons & Jenny Lake 026.jpg with a new modified date and time. I can even choose Save As from PS CS4 and it asks me if I want to overwrite Tetons & Jenny Lake 026_edited-1.jpg and I select Yes, but I get the exact same results. Thanks!

JTable - active cell not highlited when editable

Hello,
I'm using JDK 1.4.2_05, and I'm seeing some behavior that seems a bit strange.
In my JTables, some cells are editable, and others are not. When the user moves the active cell around (with the arrow keys, or TAB and RETURN) the non-editable cells show up with a nice blue color. If a cell is editable, it doesn't change at all, so the user has no idea where the "cursor" (meaning the active cell) is.
These cells don't have any special renderer or anything. My JTable has these set:
setRowSelectionAllowed(false);
setColumnSelectionAllowed(false);
setCellSelectionEnabled(true);Thanks for any advice!
--- Eric

Okay, yeah, I overrode the default renderer, and had it check whether the cell was selected or not, setting the background color appropriately. Duh. --- Eric

Audio/Video Not Synchro when capturing

Hi,
I'm having an audio/video synchronization problem when capturing HDV material onto IMovie. There is probably a 1/2 sec delay. How can I resolve this problem?
First thing iMOVIE says: Cpsturing HD at 3/4 SPEED. Should I worry about this?
I have updated my Imovie and camcorder settings according to my sony camcorder instructions. Camcorder: SONY HVR A1E.
Your thoughts?

First, make sure your camera is exporting with 16 bit sound and not 12 bit.
Something here might also help:
iMovie: Improving audio and video synchronization
http://docs.info.apple.com/article.html?artnum=42974

Yosemite 10.10.1 - DNS cache does not clear when switching between WiFi networks

Before updating to Yosemite, DNS caches would clear when switching between WiFi networks, as they should.
For Example, when using an Exchange server, your server name might be something like mail.company.com. Outside of the corporate LAN the IP would resolve to the outside (WAN) address. When you move the laptop inside the corporate LAN, it should clear the cache so mail.company.com resolves to the internal (LAN) address. This is just one example of a dumb DNS transition not taking place switching from outside to inside (and vice versa).
Instead, OS X is holding onto the outside DNS record even when moving to the Corporate LAN. The only way to fix is to run the DNS cache command (which is MUCH more convoluted in Yosemite now), or more easily, to quickly turn off then turn on WiFi.
This is an irritation as I have to perform this action every morning, and every time I come back to my desk from offsite.

Well, clearing the caches is as simple as this, no?
Clear MDNS Cache
sudo discoveryutil mdnsflushcache
Clear UDNS Cache
sudo discoveryutil udnsflushcaches
One other thing: Have you tried 10.10.2? There are many many fixes in 10.10.2 over 10.10.1.

CSS containing PHP not displaying when editing locally

Hello,
I'm having trouble getting DW to 'see' my CSS styles. This is
because my 'CSS' file is actually a PHP program that outputs CSS.
So, in my css.php program, I have at the top:
<?php
header("Content-type: text/css");
...and then the CSS definitions underneath.
I reference it with:
<link href="../css/css.php" rel="stylesheet"
type="text/css" />
It works fine on the server, but of course I can't see the
styles when editing the HTML in DW, because it's seeing the raw php
file instead of the
output of that PHP file.
I've considered installing PHP locally to see if that solves
the problem, but does anybody here have any other ideas, or has
anybody already solved this problem?
Many thanks.
Kind regards,
Nick

I don't know - it might.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"crash" <[email protected]> wrote in message
news:eda2ni$nvf$[email protected]..
> live view would work, shouldn't it?
>
> "Murray *ACE*" <[email protected]>
wrote in message
> news:eda29i$ndf$[email protected]..
>> They would only show up if you served the page, I
believe.
>>
>> --
>> Murray --- ICQ 71997575
>> Adobe Community Expert
>> (If you *MUST* email me, don't LAUGH when you do
so!)
>> ==================
>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>> ==================
>>
>>
>> "nheaps" <[email protected]> wrote
in message
>> news:ed9u9v$ivm$[email protected]..
>>> Hi Shane,
>>>
>>> Would the testing environment enable me to see
the CSS styles in the
>>> editing window, or would they only show up on
the locally-installed web
>>> server?
>>>
>>> Kind regards,
>>>
>>> Nick
>>
>>
>
>

HD video not clear when editing

Similar Messages

Maybe you are looking for