HDMI Drivers reinstall

I recently had issues with the laptop which was rebuilt / restored. Previously I had no issues connecting my laptop to a HDTV (have the correct cables, know how to do it, etc). So I think I need to reinstall the correct drivers - can you please advise which ones I need to reinstall, and preferably share the links? WHen I search through available drivers for my laptop on the HP site none look appropriate to fix this. thanks

Hi,
Try this --
Download, save & install Intel High-Definition (HD) Graphics Driver . This package should also install the HDMI Audio Driver.
Restart system after installation completes.
Source: Software & Drivers
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Similar Messages

Reinstall win 7, VGA and HDMI driver

Hi everyone,
2 problems
1.I treid to reformat my hp probook 4320s and reinstall windows back to factory settings. I made a recovery disk when i first got it (at least im sure i did) and when i try to boot it says windows is loading files, i see the white bar accross the bottom moving along until 2/3rd of the way then it stops. Ive left it for 8 hours this way and it remains frozen. did i not create the disk properly?
2. So instead i had a spare win 7 and reinstalled using that, i suspect the VGA and HDMI drivers are missing or something because now when i connect an external monitor via these 2 ports nothing comes up whereas it did before i reinstalled.
Does anyone know which specific drivers i need? I looked on the support page but iv eno idea which one i need.

Hi:
Since your model can have either the Intel or AMD/Intel switchable graphics, there is no way of telling without some additional information.
Go to the device manager and click to expand the Display Adapters category.
When the graphics drivers are not installed, you will see a device labeled Standard VGA Adapter.
If you see one listing of a Standard VGA adapter, then install the Intel HD graphics driver.
If you see two listings of a Standard VGA adapter, then install the AMD graphics driver.
The AMD graphics driver will install the drivers for both the AMD and Intel switchable graphics processors.
As far as the recovery disk not working, it is anyone's guess as to why.
You can order a set of recovery disks by contacting HP for the country you live in at the link below.
http://www8.hp.com/us/en/contact-hp/ww-contact-us.html

TS1363 My Iphone 5 will not sync with my Itunes. I have updated my drivers, uninstalled and reinstalled my Itunes, done all the necessary steps. Ever since the new software update it will not sync and will not even show my Iphone when i open Itunes.

My Iphone 5 and Itunes no longer sync after I updated my IOS to 7.1 I have done multiple things to troubleshoot. Uninstalled drivers, reinstalled drivers, uninstalled Itunes, reinstalled Itunes, etc.. It will not show my Iphone in Itunes anymore and will not sync.

Hello bsae14,
I would be concerned as well if my iPhone was not recognized by iTunes. Thank you for providing all the information with the steps you took in regards to this issue. I found an article with a few more steps you can take (you can skip the steps you have already taken):
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thank you for using Apple Support Communities.
Best,
Sheila M.

[Problem with U310 and W8] Deinstalled my WuDFRd-Drivers

Hey,
i just set up my new u310 with windows 8 and it worked fine. Then i realised, that on startup it takes about 4-10 minutes to search for wifi and i began struggeling around with things... deinstalled some drivers, reinstalled them again, just to see which drivers collide because the wifi service didnt start on startup.
Then i saw a message on my system which was timed around the startup time and it said "The driver \Driver\WUDFRd failed to load for the device ROOT\LENOVOVHID\0000.". I looked it up on the internet and i saw that few people had the same problems with the long startup and similar things... so i just deinstalled the "Windows Driver Package - Lenovo WuDFRd Drivers" to reinstall a newer version or something like that.... but problem is, Where can i find this Driver package? I just cant find it. Will the startup problem be solved with a new installation of these drivers? Please help me

Thank you for your response. Originally, I had a problem with Airport and ended up reinstalling Snow Leopard. Since then, when downloading upgrades etc, such as HP printer drivers, iTunes etc., towards the end of the download when its running the script, I get this message: /System/Library/Extensions/comcy_driver_USBDevice.kext
+was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update+
Sometimes, the download hangs and is unable to complete. The main problem I've encountered so far with an application is when I use the printer to scan an image via Preview, it's blank: there's nothing there.

Vista won't install drivers

I've searched through but maybe this has been answered elsewhere. Anyways I had an iMac intel based from 2008, it broke down recently and since it was under warranty they gave me a new one free. I had bootcamp with vista on it and till the end of it's life it worked well enough for windows. New computer comes (specs are 27 inch imac with the basics seems to be the newest model they have on the store,) well everything backs up fine from time machine, I proceed to partition it and run the vista install. Plugging in the snow leopard disc vista installs the updates then when it reboots it black screens and crashes. So after a few reinstalls and deletions I put in the original disc I got with my original iMac that was the one I used on my original bootcamp. Well the drivers say they install but the computer does not flash or beep and when it restarts there is no sign of the video card taking effect, basically the drivers don't work or they aren't getting installed.

Trouble with Apple's graphic boot camp drivers. It has gotten better with the latest iMacs and latest OS X OEM DVD with newer Boot Camp 3.x drivers than what there was.... I assume it came with new DVD for OS X, right?
I haven't kept up but you do need to uninstall graphic driver and let Windows update/install its own and then you can use ATI Catalyst 10.x
The problems from last fall - and no longer true, but this is how it use to be. THERE ARE POSTS regarding iMac 27" graphic drivers around.
A tip and workaround for how to get ATI mobility/laptop drivers so that Windows no longer thinks the ATI is a desktop card:
http://discussions.apple.com/thread.jspa?messageID=11286987
Summary (my own edit steps):
1. Install Boot Camp 3.0 and upgrade to 3.1
2. Uninstall graphic drivers and run Driver Sweeper
http://www.guru3d.com/category/driversweeper/
instead of:
removing the crashing driver by going into windows 7 setup via its install cd and deleting the ati driver manaully
3. Install ATI Mobility (link)
4. Uninstall ATI (Programs control panel?) Device Manager (rollback; uninstall?)
5. Device Nanager: update driver and BROWSE BACK to 8.681 (the original apple driver that was causing freezes and purple artifacts) - navigate to /Apple/Drivers/ATI
(Apple uses) a 4850 card in the iMac, its modified a bit for apple. Enough that desktop drivers don't work, and modded-for-laptop desktop drivers don't work either.
Now the upshot of using modified drivers is that it FORCES the catalyst control panel to be installed, meaning you get a few more options to mess around with the card.
I couldn't use the original apple drive, it locks up, the newer one had banding, the newer radeon drivers direct form ATI wouldn't work until they were modded and then they cause black screens.
SO the solution, as obscure as it was, was to download ACTUAL mobility Radeon drivers - version 10.3 still, but made for laptops.
http://support.amd.com/us/gpudownload/Pages/index.aspx
THESE drivers I was able to install - and here is where things changed.
THIS driver changed they way windows saw the video card in device manager.
As I mentioned before, its NOT a desktop card, its a modified laptop card, but installing mac drivers makes windows THINK its a full desktop card, and running the original 8.681 driver crashed it.
Once installed 10.3 LAPTOP driver it now appeared in device manager as a MOBILITY card.
These Steps "should" work:
delete ATI driver manually
reinstall apple driver after that and see if that works,
otherwise try the steps above
(mod drivers, remove via windows recovery off setup disk, install laptop drivers, reinstall apple driver over it)

NO Audio HDMI on HP 17-j001eb with Windows 8.1 Pro to Sony Bravia KDL-40W5500

Hi,
When I connect my pc for watching movies on my tv, I have no audio.
This is my setup:
I've a Sony Bravia KDL-40W5500. He is connected to my Sony Multichannel AV Reveiver (output) (All my hardware -> decoder, BD player, ... Are conntected with the receiver (input). There is just one HDMI cable to my TV.
Receiver backside:
Problem:
When I conntect my PC ( HP 17-j001eb ) with HMI on the receiver (Sony STR-DH500) input (Exampel DVD or, SAT, or whatever ...). I select hdmi as a default output and I play a movie ( extention-> .mkv), there is video on the tv but no sound. I search on this forum en I try many solution but The problem is staying .
I play the movies with Cyberlink Power DVD.
I select my output on my pc to HDMI as default (my pc is in Dutch):
In power DVD is the audio HDMi as default selected.
I run Windwos 8.1 PRO.
What do I wrong?
Is there anybody who can help me?
Thanks in advance!
R.

@RW4HP ,
Hello and thank you for posting on the HP support forums. Lets see if we can get your sound issue resolved here.
First thing we will want to do is break down each step in the chain of components.
First thing you will want to try is to connect directly to the display with your notebook and try to play the movie.
If no sound go to the next HDMI input on the Display. NOT THE SONY. If no sound from each of the input ports on the Display. Change the HDMI cable.
Repeat the first steps.
Now if that fails try another DVD. If you are still having a no sound issue try a new media player.
Switch up to VLC media player. The only reason I suggest this one is due to the fact that is a free player and is loaded full of codecs that support almost anything.
VLC Media Player
If this fails to do the job then we shall move on to the removal of the drivers.
Now when you go to uninstall the HDMI driver you will want to do this from safe mode. This will make sure no other drivers or software are live to make a mess of the removal.
Before you remove the drivers though you will want to download the drivers that are the only supported drivers for your system from this link.
HP ENVY 17-j001eb Notebook PC Drivers
Now boot into safe mode and remove the HDMI drivers and the Graphics and Sound drivers.
Windows 8 Safe Mode
Once you have done all this the next thing is to follow the steps for troubleshooting HDMI.
Here are some links.
Connecting a Monitor, Projector or TV (Windows 8)
This next link resolved an issue with no sound when updating to windows 8.1.
HDMI output not working after Windows 8.1 update
Troubleshooting HDMI display and sound issues
Let me know how things go.
Thank you again for posting and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

K7N2delta ILSR won't except video drivers?

I bought a K7N2delta ILSR & can't get it to accept the drivers for an ATI 9600? Before I install the drivers windows XP pro sets some drivers & I can alter the pixel settings, but once I install the ATI drivers I get nothing but a black screen? I boot & the windows XP splash screen comes up but the welcome screen never makes it? I can start in safe mode & the desktop is visable but once I go to regular boot I get nothing but a black screen?
I read a thread where they suggested using a two button mouse but that didn't work either? Any advice or suggestions?
Running BIOS 7.4. Should I flash back to 7.3? Reset CMOS & try over?
Anyone have suggestions?

I hate it when people don't reply back to their own thread to say if they resolved their problem(s) or not? I'm not sure what happend but I bought an fx5200 and installed the drivers to find out my AGP slot was not fried or anything else for that matter? I then removed the nvidia drivers & reinstalled the ati drivers for the 9600np to find that all is well & functional? I don't think this was caused by a bad agp seat but it could have been? All I know is that I don't appear to have a bad board.\
FYI .... this board has some nice OC'g features but my gigabyte board overclocked better with the same components & I might add no problems seen on this board!?

G4Ti4200 Capture drivers

Ok, now that I'm on the right board, I'll try this question again.
I keep running into a problem with the video capture drivers for this card. I had no problems at all on my
P4B533-E. But on this A7V333, it keeps giving me hell.
I've tried the rollback drivers, reinstall method ect. Any other ideas? ?(

friendi got myself the same prob, if i get any answers to my thread i will let ya know lol

HDMI no tv sound

I have a dv5-1388 upgrade to Windows 7. No sound from the tv using the HDMI cable. I have looked in the sound folder in the CP and I do not have a HDMI option to click on. Now where do I go from here?? Thanks
This question was solved.
View Solution.

Hi,
Download the Chipset driver and Graphics driver on the links below and save the installers to your Desktop.
Chipset Driver
Intel Graphics Driver
Next, in Device Manager, open Display Adapters, right click on the Intel graphics chip and select Properties. Click the Driver tab and then select uninstall. When done, do the same for the for the Intel High Definition Audio HDMI and the IDT High Definition Audio CODEC found under Sound, Video and Game Controllers.
Now return to the Desktop and install the Chipset driver and then the Graphics driver. When complete, reboot the notebook, let Windows fully load ( it should automatically reinstall the IDT driver ) and check the following.
Check in Device Manager that both the Intel Graphics and the Intel Hi Definition Audio HDMI have reinstalled successfully and whether you see the HDMI Audio option under playback devices ( found in Control Panel, Sound ).
If it shows up correctly, try the HDMI connection and see if it now functions properly.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Pavilion dv7-6157cl 64bit Windows 7 Home have lost my USB2 drivers

Machine no longer recognizing USB2 drivers! The USB3 working fine. Can't get mouse or Thumb Drives to be recognized. So what do I need to do to get the drivers reinstalled once again? Thanks in advance for your help.
Loy Banks - Gramps to 11

Hey Loybanks,
Give the Microsot FixIt Utility a try. This tool has a good success rate in fixing these issues. Here is the link: Fix It
Thanks!
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Help Please. I updated my Audigy ZS drivers and now no Multimedia Audio Controller fou

Running WinXP Pro. I decided to update my drivers as reports were showing them to be out dated. Fine, no biggie. After updating, I now have no MAC found.
I have tried everything I can think of. I have used DHdri've cleaner pro to remove any previous drivers, reinstalled, no luck. I moved to a different PCI slot, still no luck. Tied older drivers, still no luck.
I eventually had to take the card our and enable the crappy on board audio just to have sound again..
any tips would be greatly appreciated.
Thanks

Well you are in a Pickle..... Bet you are gonna have to do a fresh install of yoour XP pro and use your old drivers. It is my belief that CL has no idea on how to write drivers for their hardware anymore at least that is a stable enough ... my opinion.... not fact but with all the problems with the X-fi and drivers....

Drivers corrupted after using firewire port on Audigy 2 (intern

after using the firewire port, I can't use the audio inputs on the audigy card.
the problem is that the drivers are somehow corrupted.
I have to reinstall them whenever I use the firewire.
I chiefly use the firewire port to import video footage using MovieMaker
My system:
Dell P4 .8G
.25G ram
Plextor 704 DVD writer
Windows XP sp

Wiped the drivers
Reinstalled drivers
Plugged Camcorder into SB394
Unplugged Camcorder
Plugged in tapedeck into audio in
No sound - drivers corrupted
Reloaded drivers
Same problem, no change

Recovering drivers after disk crash

My hard drive crashed. Fortunately I had a current Time Machine backup which restored all my files. I thought. I had no exclusions in the Time Machine options, so I am sure I did not exclude my drivers, but somehow, they did not restore. I am speaking specifically of my printer and camera drivers, but there may be others I have not discovered. And for some reason, I am unable to reinstall them from the original manufacturer's web site. The Canon camera drivers apparently install, but no luck in iPhoto, it doesn't see the camera. The Brother 5250 drivers are a different matter. For some reason I need to know IP addresses, DNS server names and other stuff to get the driver I downloaded to work. Don't know how and don't know why. It worked before using Snow Leopard.
My question is this, assuming I get my drivers reinstalled somehow (although all suggestions would be welcome), how can I ensure that they get backed up and restored if the crash ever happens again?

RPHarris wrote:
The Apple fix-it folks replaced the disk and installed Snow Leopard. From that point on, I did a full system restore, including using the Snow Leopard disk. I have been using the computer for a few weeks now, so I can't imagine redoing a full system restore makes sense any more.
Oh, no, if it didn't restore that way the first time, it won't now.
Where are the drivers for printers kept anyway? I am not familiar with the Mac system libraries. Maybe I can just find the driver on a really old back up somewhere, or on my other Mac, which has the same drivers, and just copy them over?
Most of the printer stuff seems to be in the maker's folder inside the top-level /Library/Printers folder.
It's very odd that they didn't restore. I don't recall ever seeing that reported here.
You might also want to browse, search, or re-post in the +Printing, Faxing, and Scanning+ forum. There's likely someone there with better info.

Cracking audigy 2 ZS after drivers upd

I updated my old drivers (the CD drivers) with the online drivers, after all the process and reboot, when I play something, audio comes with cracking noise..
I tried to uninstall drivers, reinstall old drivers, change the pci slot of the card, but the problem still exists.
With another soundcard (not creative) everything works fine.
What can I do?!

You mentioned mics (several I suppose).
Audigy 2 Zs Notebook does have only one mono microphone input shared w/ analog line-in and S/PDIF (a multi-purpose input 'port' called FlexiJack).
As a PCMCIA audio device, I suggest you to get E-MU 66 or 66M instead of SB Audigy 2 Zs Notebook.
There are also plenty of USB and FireWire audio interfaces available you can use w/ laptop.
jutapa

No audio device is installed says volume mixer

So suddenly one day the audio on my system just disappears. Little white x on the speaker icon on taskbar, mouse over it and it displays my current audio device and volume 0. Open playback devices and all are enabled and "working". Open volume mixer and "No audio device is installed". In device manager, all audio devices are installed with current drivers and all are "functioning normally". I don't quite understand this contradiction...
Two days later, after searching through hundreds of forum threads and finding that this problem is actually fairly common, I still have not found a solution. This is what I have tried:
Obvious first step for me was to reinstall the audio drivers. No success
2) Uninstall ALL audio software and drivers, reinstall everything from manufactures websites. No success
3) try to restore to an earlier configuration. Guess wht, NO RESTORE POINTS. No success
4) Stop/Start Windows audio service. No success
5) Open BIOS set up screen. Can not find any audio options at all....(No success)
6) Download windows Vista service pack 2 (yes, I am running vista), try to install, but every time I try it gets hung up on "Preparing your computer" and stops responding. Yes I have tried to download it multiple times from Windows download center and have also tried to run without saving. Since it never installs, No success.
7) Download a "fix" for a similar problem arising after waking a system up from hibernation (KB9296850). Didn't match my problem exactly but thought it was worth a shot. Again, every time I try to install it gets hung up on "searching for updates" and stops responding. Again, downloaded multiple times, run from location, all from microsoft. No success
8) Desperation setting in. Insert system restore disk. Doesnt work. Tells me its only for use on Acer system. Guess what I AM RUNNING AN ACER SYSTEM. No success
9) Still have a copy of Windows XP. Insert and boot from the disk. Try to format the HDD and install Windows XP. For some reason does not work. Try multiple times, Will not install on this system. Cant remember the exact error code it gives me. No success
System Specs:
Acer Aspire M5620
Intel Core 2 quad CPU 2.4 GHZ each
Acer proprietary motherboard and bios
Has anyone EVER fixed this problem. I have tried everything, I cant even format my HDD, which I know is not related to the audio problem but still frustrating.
Thanks

Looks like a real mess. Use the XP CD and boot it up, delete any partitions.
Use your recovery DVD for Vista and then attempt to use that, if that does not work then there may be some hardware problem
Corsair Carbide 300R with TX850V2
Asus M5A99FX PRO R2.0 CFX/SLI
AMD Phenom II 965 C3 Black Edition @ 4.0 GHz
G.SKILL RipjawsX DDR3-2133 8 GB
EVGA GTX 660 Ti FTW Signature 2 (GK104 Kepler)
Asus PA238QR IPS LED HDMI DP 1080p
ST2000DM001 & Windows 8.1 Professional x64
Microsoft Wireless Desktop 2000 & Wacom Bamboo CHT470M
Place your rig specifics into your signature like I have, makes it 100x easier to understand!
Hardcore Games Legendary is the Only Way to Play!

HDMI Drivers reinstall

Similar Messages

Maybe you are looking for