Hdmi splitter work not good in windows 8.1 but in windows 7 it work fine.

hello
I've always worked on Windows 7, and had to put in new windows and thought just go to 8.1.
but I had an hdmi splitter some which say in 1 and 2 out without a button.
in windows 7 that went just fine, but when I had to put Windows 8.1 is all very large.
count that the resolution just at the very state increases.
had already amd contol center installed but it remained so.
and MSI afterburner. but completely changed nothing.
I thought I got the splitter between sit so did my PC screen immediately and the image was normal.
as it should. but still if I put the tv in my videocard then is everything very large,
but watch film can.
I got out there between for instance if I want to watch that movie and I've only put me TV on the right channel.
how can you have a solution?
my PC monitor: LG full HD 22ma53, 1080P resolution
my tv screen: Samsung full hd UE40H5500aw, resolution 1080
my graphics card: MSI R7870-2GD5T-OC

I give up and return M500 (I had two drives).
I bought Intel SSD 530 180GB, cloned Windows 8.1 on desktop.
Set SSD windows partition as C: and HDD windows partition as E:.
Put SSD and HDD back to notebook.
Windows boot up from SSD in seconds.
Result: SSD Crucial M500 + HP 250 G3 (J0Y29EA) + Windows 8.1 are not compatible.
I don't know which one to blame, but this combination is problematic.
Intel SSD 530 had some issues too, like windows freezing.
One can be solved with windows update fix it (diag) from http://support.microsoft.com/fixit.
Another one is waking up from sleep mode. It can be partially solved in Power managment, but it's not elegant.
So that's all for now.
Have a nice year.

Similar Messages

No sound over HDMI, picture works fine but in sound manager tells me HDMI not connected

Hi There
I have a tm2 1050ez and am experiencing problems with my HDMI port.
When I connect it the display automatically gets duplicated and everything works fine, but when I try to play a movie with vlc for example I do not get any sound through the TV, only on the tablet.
Of course I went into the sound manager because I suspected that you must tell the tm2 where to play the sound, but to my surpise it said that the HDMI cable was not connected?
I therefore could not make any changes to the default output device...
Even in the IDT application wants to tell me that the HDMI cable is not connected. I have plugged and unplugged it several times to no avail.
I hope someone can help me on the above, I already searched the net for several hours but havn't seen a similar problem, with the most problems it does show the cable as conneted..
Thanks in advance!
Geen
This question was solved.
View Solution.

I have same issue as reported by another board member.
I've HP DV4t 1300 laptop with Vista 64bit with service pack 2. I upgraded all drivers and everything is upto date.
On awaking from sleep/hibernation AUDIO is screwed up on LCD connected via HDMI. No matter what I do if I make my computer sleep/hibernate and then connect LCD I'm unable to get audio working.
Help from technician will be appreciated. Technician can reporduce issue as I mentioned.
Thanks,

Lost sound on 1st generation Apple TV using HDMI. Works fine with RCA. Any ideas about what might be wrong?

Have an old 1st gen. Apple TV that has worked fine for a long time. I suddenly lost the sound using HDMI connection. No help with a different HDMI cable. System works fine using component and RCA cables for video and audio. Does anyone in the Apple communinty have a similar experience or any thoughts. Thanks for you help in advance.
Mike Ryan

If the HDMI output on your ATV is toast, replacement is the way to go. However, if you're tried the HDMI cable to a different HDMI port on your receiver and it works there AND you're maxed out, you might try one of the splitters at the link below (at 12 bucks, an easy way to pick up a couple of HDMI ports). I'm using one of these and it works fine. It seems to sense which HDMI input is active and automatically routes that signal on to my receiver.
http://www.amazon.com/HDMI-3-In-1-Out-Switch-Cable/dp/B0018DQYQ2/ref=sr_1_3?ie=U TF8&qid=1359050499&sr=8-3&keywords=hdmi+3+way+splitter

IPod will not install on Windows Vista, iTunes is fine?

Hello,
I am running Windows Vista Ultimate on 2 computers. One computer connects to my 60GB iPod video just fine, while the other looks for drivers and then fails to find any. I get a window that pops up saying "Insert the disc that came with your iPod" after Windows searches for drivers. Because of this, the iPod does not appear in iTunes, nor does it appear in My Computer. I have tried performing a soft reset on the iPod (Menu/Center combo) which did not work. I have also tried reinstalling iTunes to no avail. This is a brand new Windows installation and I just can't figure out why it won't work. iTunes seems to work just fine in all other respects.
Thanks,
Brian
Message was edited by: kstrike155

I found these steps here: http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1286482&SiteID=1&pageid=4
Scroll down to the quote from WickedMX.
Basically, C:\Windows\System32\Driverstore\Repository and look for a folder that starts with usbstor. You will probably have two different versions. Open the folder that is the newest version and then copy the files usbstor.inf and usbstor.PNF. Copy them to the C:\Windows\INF folder. Try installing your device(s) again and it should work like a charm!
Brian

Hdmi was working fine , now I am getting no signal, please someone help!!

I Moved my tv and Macbook pro to another room and now my Hdmi will not work. It keeps saying no signal. Please help!

gfxCardStatus is a 3rd party product that you would have had to install. The fact that you are asking what gfxCardStatus is, most likely you have not installed it.
gfxCardStatus will have an entry in your menu bar. The letter displayed will reflect which graphic mode it is using. 'i' will be used if in Integrated Only.
If you did not install gfxCardStatus or similar utility, then chances are that is not an issue for you.

Hi, ibought iphone 5 at thailand and i live at israel. the screen of the iphone not good and i have responsibility but at my company say that they can't help me what can i do to fix the iphone??

help

Take the iPhone back to Thailand for service and possible
replacement. iPhone warranty is valid only in country of
original purchase. You must take the iPhone yourself or
send to friend/relative to take in to Apple Thailand. Apple
does not accept international shipments for repair nor will
Apple ship out of the country after repair.

HDMI cables do not work on my AppleTV

i tried connecting my apple tv to my Marantz projector via HDMI cable, and its not finding it. it just says "signal not found." my component cables work just fine on it, but no-go on HDMI. and i know the HDMI cable works fine because i've used it on my PS3 and Xbox 360. i've read a few threads that talk about 1.3 or 2.0 HDMI cables, or using an HDMI switch, but before i spend money on either (which could possibly be expensive) i would rather know how to fix it. can anyone help me?

like i said, everything seems fine because my blu-ray and HD DVD players both work fine, and they use regular HDMI cables

I bought the hdmi adapter for my new ipad (ipad3), it was working fine for about a month. Then suddenly one fine day, a message pop out on my new ipad saying that ipad does not support the device. What is going on?

The hdmi adapter no longer works, and I tried it on different tv, different hdmi cables, apple's adapter still don't work. My iOS is 5.1 by the way. HDMI cables work fine for other devices, connect it to my computer, works fine, connect it to dvd player works fine. So what is going APPLE? I splashed out SGD59 for this handy adapter, and it no longer works after a month!!!

ipadfan2012 wrote:
Hi yes, I've turned my new iPad off and turn it back on again, along with my Tv, still did not work
No. Meg was referring to a reset:
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.

Hdmi splitter

I bought a splitter, works great with all devices except you view, phoned humax they directed me to bt I rang technical support they could not help, they sent an engineer who said that because the box links directly to the tv there is nothing bt will do to fix the problem. I asked could bt advise me on a splitter that is compatible with their box. No! The only solution they could offer was to use the scart or disconnect one device and manually connect it when in use, this is not a practical solution.
According to other posts where people have been able to contact humax they have stated its yv software and the issue lies with the provider. Bt technical support couldn't tell me anything of any use. I explained as a customer the solutions they were offering me to my issue were unsatisfactory.
Nobody has been able to explain why I cannot use this device even the "engineer" couldn't explain other than it works fine connected directly so either connect one other device via scart or manually switch, I bought a hd tv, 2hdmi cables, bt & yv paid for xbox live bought a hdmi splitter spent a fortune to get told I have to either compromise on the picture quality on one device or go through the hardship of pulling the tv out and manually connecting. This is not good enough!!!
As humax insist it's bts yv software, bt should be more accommodating to customers, they need to find a solution and to advise customers at the very least that although hd ready they don't support certain splitters and list the ones that they do!
For a company that is trying to compete with the likes of sky and virgin
1. Technical support should be able to advise on technical issues
2.engineers should not tell paying customers to compromise on the service they are paying for
3.if u can't fix the problem offer some degree of compensation.

I think I may be able to explain why this is happening.
Most HDMI splitters work fine when the HDMI link is not encrypted.
However, some devices are obliged to use HDCP (High-bandwidth Digital Content Protection) to protect the content. This is mandatory for Blu-Ray players and most Set Top Boxes including Sky, Virgin, Apple TV and BT/YouView. The box needs to set up a secure link with the TV to prevent copying and unfortunately most cheap splitters aren't intelligent enough to handle that.
I think you'll find your splitter won't work with Sky or Blu-Ray either.
Some splitters claim to be HDCP compatible and may work but I'm not sure how well they work and they'll probably cost more.
I use a Pioneer VSX-2021 A/V receiver which has 7 HDMI inputs and two HDMI outputs so I can connect all of my boxes to my TV and my projector and it works perfectly with Sky+HD, YouView, BT Vision and Apple TV so I can watch any source on my TV or my projector (or even both at the same time). This isn't a cheap option though - A/V receivers with two HDMI outputs are likely to cost £400+ but they also offer lots of other benefits including 5.1 or 7.2 surround sound.
In this case it may not be BT's fault, although they should have been able to explain this to you.

[SOLVED] Audio over HDMI stopped working? (Intel/i915)

My audio over HDMI was working fine until recently and I can't figure out what's stopped it from working... My configs haven't changed and aplay -D plughw:0,3 /usr/share/sounds/alsa/Front_Center.wav gives no errors, but no sound can be heard. There are no errors/messages in dmesg either.
My graphics card uses the Intel i915 chipset (Asus laptop).
Config stuff:
/etc/asound.conf:
pcm.!default {
type hw
card 0
device 3
ctl.!default {
type hw
card 0
device 3
aplay -l:
**** List of PLAYBACK Hardware Devices ****
card 0: MID [HDA Intel MID], device 0: CONEXANT Analog [CONEXANT Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: MID [HDA Intel MID], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
Any ideas?
Last edited by Minsc (2014-06-19 01:04:29)

Yeah I checked and everything is fine... this is really weird!
I've tested audio over HDMI on windows, so I know it's not the cable/HDMI port. I've looked through my pacman.log (I tend to update daily) and the only thing I can see which could affect it is a kernel update and intel-dri. I tried downgrading those and re-tested, to no avail.
I also installed pulseaudio and pulseaudio-alsa before it stopped working. This could have broken it, but I've since uninstalled them and replaced /etc/asound.conf with my original, so that rules those out; unless there is something else that pulse could have broken?
Cheers
Last edited by Minsc (2013-01-28 07:42:59)

Dual monitors with HDMI Splitter

I am wanting to use my ATV 2 at work to run a slideshow on 2 monitors. I bought an HDMI Splitter but it just has a black screen. If I hook up 1 HDMI it works fine. Any ideas?

It sounds like you are trying to use a passive splitter, which means when two displays are connected at the same time the Apple TV will be trying to talk to two devices at once causing corruption. You might try powering on one device at a time but my suspicion is it still won't work and even if it does you may well experience a degraded signal.
You probably require a multiplexer which is somewhat more expensive.

Phone not visible in Windows Explorer - post 10.3 upgrade

I installed 10.3 on my Q10 no problem, saw the Blend icon and decided to install (having used it on the work Passports) so a couple of things....
1. Blend now downloaded - but wants to install on an F:drive - which would be the Q10.
2. When connected via USB (or wifi) the Q10 is not visible in Windows Explorer (it was fine in 10.2)
3. Can see the drivers begin to install, but then it rolls back and a 'Install failed, cannot find F:drive' appears.
4. Is Blend intended for use on the Q10.
Anyone got any ideas I can try?
Solved!
Go to Solution.

Found it, you have to go into Settings > Networks and Connections > Connection Services > USB and slide the USB Mass Storage Mode to the on position. It will then show as an ext. hdd in Windows Explorer.

Why has HDMI stopped working in snow leopard after I removed then pluggend HDMI in again?

My Hdmi cable is no longer seen by my samsung TV, I took the cable out of back of TV to tidy cables , plugged back in and nothing( has been fine for 4 years). Samsung has msg 'no signa'l which means it is aware something is connected and powered, doesn't show this msg when Intel mac not on, have checked other hdmi appliances (dream box) on Samsung TV works fine. Have changed the hdmi lead, same prob. Intel mac and hdmi leads work fine on panasonic TV.
Any ideas? Thanks, have reset PRAM and started in safe mode
Intel mac 10.6.8 Graphics card ATI Radeon HD 2600 XT:
If i upgraded to mountain lion would this resolve it?

Handshake problems, cheers, a lot to read about this. Havent cracked it yet but looks very relevant , ta

Y50 blank screen on laptop , but works fine with hdmi on my TV

I recently bought a lenovo Y50
I connected it with my TV via HDMI
was working fine for a couple of days but one day the laptop screen went blank.!
i think this was after the windows updates
now the problem is that the laptop works just alright but shows nothing on the laptop's screen
shows display only when connected to an external monitor,
I connect it with my TV using HDMI to operate my laptop .
please help me
thank you

ezio9398 wrote:
I recently bought a lenovo Y50
I connected it with my TV via HDMI
was working fine for a couple of days but one day the laptop screen went blank.!
i think this was after the windows updates
now the problem is that the laptop works just alright but shows nothing on the laptop's screen
shows display only when connected to an external monitor,
I connect it with my TV using HDMI to operate my laptop .
please help me
thank you
It could be a defective display. Some have tried this and was able to restore the screen:
1. Disconnect the A/C power supply.
2. Shut down the computer.
3. Remove the battery
4. Connect the A/C power supply
5. Start the computer.
See if the screen comes back. If yes, reverse the above steps to replace the battery.

No VGA out on new K9N2GM-FIH but HDMI works fine

Hi,
I was hoping someone might help. I am getting no VGA out on my new K9N2GM-FIH motherboard. The board passes POST and the HDMI out works fine (was able to view Windows Vista on my TV). I was wondering if anyone had this issue or had any ideas how to fix it. It may be that it needs to be replaced.
My setup is:
K9N2GM-FIH
AMD Kuma 7750 BE CPU
300W Hipro PSU
2x2GB 800 Mhz Patriot RAM
I know the power supply is small but I'm only running onboard graphics. I've already tried a different brand of RAM.
Thanks in advance.

Quote
Can anyone think of any other possibilities as to why this might be happening. I'd hate to exchange it only to have the same thing happen again.
It could just be a broken VGA port, in which case you have no option but to get the board replaced. I presume you have already tried the basics such as a different cable and a different monitor.

Hdmi splitter work not good in windows 8.1 but in windows 7 it work fine.

Similar Messages

Maybe you are looking for