HDV vs. DV: Exporting to DVD process???

Couple of questions here. I dont have too much experience exporting to a DVD.
1) Current equipment is a Canon GL2 with Final Cut HD. I created a 10 min video project with captures using the DV ntsc presets- 720 x 480. Compiled the clips and exported using 4:3 aspect DV 640 x 480 quicktime movie. Created a DVD using DVDStudio. Played it on a DVD player and the picture was a bit pixalated. Am i doing something wrong? Can i export to a higher resolution prior to making a DVD?
I want to make a decent quality SD DVD, do i have the right equipment- it being the Canon GL2 DV camera?
Leads me to my second issue.
2) I mentioned for the time being all i need i a very good quality SD DVD. Do i need to go with an HDV Camera? Or will the quality with using an HDV camera down to an SD DVD be the same or similar to what a DV camera can produce?
I hope this isnt asking for too much, but i tried to do a little research on my own but there are too many information floating around and its getting a little too confusing.
Any help wil be greatly appreciated!!
Jay

Export to Quicktime Movie simply maintains whatever settings you have in your sequence
If you are working with SD DV tapes (that is, regular mini-DV/DVCam) you would be using an Easy Setup of DV NTSC ... or DV NTSC 32 K if you recorded your tapes at the 12 bit audio rate. Since SD video is 720x480, then that is what you get. Exporting as Quicktime Movie gives you exactly that ... if you are going to compress for DVD, then that is what you want. You don't need ... or don't want ... any further compression.
The only caveat to this is, if you are using DVD Studio Pro you may want to use Compressor to give you some more MPEG-2 options, like adjusting endcoding options to help fit more footage onto a DVD or encoding the audio as AC-3. But you should start exporting as QT movie. You can drop that straight into DVD Studio and encode from there; if you use Compressor you drop the QT movie into that

Similar Messages

Should HDV, being exported to DVD, be UFF or LFF?

I know that HDV is upper field first. We capture and edit, and then use the Adobe Media Encoder to export a .m2v.
What gives the best quality? I'm partial to clicking 'Deinterlace' and setting the Fields to 'Progressive'.
Is that the best way to export HDV to DVD? Should I be deinterlacing? Or should I leave it interlaced? And if I do, should it be UFF or LFF? AND, if it IS interlaced, won't it look all mucked up if the DVD is played back on a computer?

Alright, I just tested it.
Here is what I found.
I had an HDV file with a really "bad" pan in it where I quickly swept from one subject to another. I put no effects or anything on it.
I went to the Adobe Media Encoder with the following settings:
NTSC
Interlaced
Quality: 5
Bit Rate: CBR, 8 Mbps
I made one UFF and one LFF. I burned them to a DVD, and watched them back to back.
They were both so identicle that there was absolutely no difference between me and 3 other employees looking at the footage. Visually, there was no difference.
So then I imported both .m2vs into Premiere. I loaded both of them into the Source monitor, so I could look at individual frames.
The LFF one had a "dropped line" at the very bottom. As if the very last field was missing, and appeared as solid black, although I have a suspicion it might actually be alpha. In Encore, it actually showed up as a very thin line of garbled reds and greens and blues and whites. But only in the preview. Nothing appeared on screen.
The UFF seemed a bit more accurate. The fields spanned from top to bottom, with no "jiggling" at top OR bottom.
I went to the middle of a quick pan, and put matching frames from both files on top of one another, then quickly went back and forth to compare differences.
The LFF file seemed to have some "mushing" in the quick pans. As if someone went in there and kind of rubbed out some of the detail. The UFF still appeared sharp, and still had very concice interlaced stepping all the way through.
Therefore, on a screen, I saw NO difference. But in Premiere, comparing both, it seems that going UFF is a bit sharper and a bit more technically accurate.
If anyone wants to try this out for themselves, please share.
But in my oppinion, with HDV footage going on to DVD, here are the best export settings:
.m2v
(leave it interlaced)
quality of 5 (out of 5)
CBR, 8 Mbps
Field Order: Upper Field First
Let me know what you think.

Best way to export for DVD

Hi Guys
Right, I am exporting to DVD and i want to know the best way to do this at the highest quality, but also, so the DVD will play on most players.
I am shooting in HDV 1080i 60, importing to Final Cut Pro 5.1.4 (the older final cut pro) using the apple intermediate codec.
I want to make the best quality SD dvd. The content is rarely over 5 minute's (kids music videos) but i am preparing a 50 minute show which needs to be put on DVD.
I usually use; export to quicktime movie, with the setting dv pal 48 khz anamorphic, i use DVD studio pro also to make the DVD, but not sure what the best settings are.
PLEASE HELP.

The BEST export method I have found by comparing them all is by exporting using Compressor and the DVD Best Quality setting. Now this setting gives you a few different options for length of your project: 120 minutes, 150 minutes, or 90 minutes. And then with each of these length options comes the option of 4:3 or 16:9. So if your project is 50 minutes, select the DVD: Best Quality 90 minutes option, either 4:3 or 16:9 depending what your project is. After laying your cursor over this option it will open up a list of audio options. What I do is just select the "All" option, which then lists all 3 audio options in your batch window: AIFF, Dolby 2.0, and MPEG-2. What I then do is just delete the MPEG and Dolby options, leaving the AIFF. After waiting for it to compress (make sure you specify a destination for the files so you can find them) it will give you 2 files, an MPEG-2 file which is the movie file, and an AIFF file (looks like an itunes file) that is the audio file. At this point, open up DVD Studio Pro and drag these 2 files into the assets window, and you're good to go from there. Hope this helped.
-JP

Best settings for export to dvd

I am exporting to dvd from ppro cs5. I am on windows 7, 64 bit, 6gb ram, intel I7 core. My export - match source, highest qualtiy, looked a little glitchy in some areas and the text did not look very clear on my titles. I think that all titles are appropriate size fonts. I am using hdv footage and my timeline is set up to match the original footage. I did have a lot of excess files on my hard drive which are now deleted. I defragged about 4 times and am now trying again. I am testing two settings - the first, export to dvd, highest quality, the second, I customized to the same mpeg2-dvd, 2 pass vbr, min 2.80, target 5, max 8. Does anyone have suggestions as to how to export the "best" quality image possible to play on a computer or on a dvd?
Thanks,
Lisa

Don't use Match Sequence Setting in the export because it uses the wrong settings.
Use a mpeg2-dvd preset and tweek the settings a bit.
Make sure the fields are set to upper as the source is HDV.
Check the Use Max Render Quality.
See how that works out.

Settings For HDV to Blu-ray and DVD

What is the best strategy for avoiding unnecessary rendering and transcoding issues? I edit HDV or AVCHD (from a DataVideo DN-60) in Premiere Pro CS6. I want to output to multiple formats - DVD, Blu-ray and Flash from the same project. I'd like to maximize quality as well to fit project on disk.
I'd also like to know which format most easily transcodes for my purposes. I typically shoot 23.98 or 29.98 fps 1080p, but sometimes 1080i.
I assume Dynamic Link is the way to go, but it doesn't look like the resulting settings are automatic. For example, if I go into project settings after Dynamic Linking a PPro sequence, and choose Blu-ray, I would expect the transcode settings to match the imported project. If it does not, then what should I change the default settings to?

Let me clarify the intent of my original post. I have read in places that it is best to choose export and DVD project settings that match the original footage whenever possible to avoid rendering problems. So, if I shoot and edit HDV or AVCHD footage say at 29.98 fps progressive, then what corresponding settings should I use for DVD and Blu-ray?
I see that with 29.97 fps the progressive option is not available in the Blu-ray
presets. Should I not shoot progressive then at 29.97?
How do I maximize quality of the video while fitting on a single disk? The only way to do it automatically is to Dynamic link, which you advise against. If I manually set exports, then I must calculate all the sequence outputs from Premiere. What then should my priorities be? For starters, MPEG2 Blu-ray or H.264 Blu-ray? What should take precedence, bitrate settings or number of passes?
I am also considering render/transcode speed. How do the above settings affect speed?

Novice here,,, Why can't we export to DVD ? Policy or Technology or ? thx

Novice here,,, Why can't we export to DVD ? Policy or Technology or ? thx

Why can't we export to DVD ?
Am afraid I don't quite understand your question since we can export and create/author DVDs. If you are asking why iMovie does not do so directly, then yes there is a problem of technology involved. QT is basically a "temporal" synchronization multimedia "engine" while DVDs are based on "spatial" compression and synchronization. Therefore, a different "engine" is required for processing the data -- Compressor alone for advanced compression and DVDSP for advanced authoring or a combined simple compression and authoring application like iDVD. If you are asking if it is possible to combine the capabilities of iMovie and iDVD into a single application, then I suppose it would be possible but probably violate the standing policy of Apple's normal "KISS" (Keep it Simple, Stupid) approach of doing things and likely create a whole new level of problems to add to the current ones already present.

Still images exported to DVD look deinterlaced and flicker on TV monitor

Hi,
I have tried tried almost everything and I still have issues with the still images exported to DVD as sequencefrom FCP 7.0 by using Compressor are deinterlaced and flicker on TV monitor. Please help remove the annoying flicker.
My FCP Timeline Sequence settings match the image resolution:
Frame Size: 1024 x 682 (double of 720 x 480 standard DVD res)
Pixel Aspect Ratio: Square
Field Dominance: None
Compressor: Photo JPG (also tried, DVCPRO-NTSC)
I cropped the original images in Photoshop to the 1024 x 682 and saved as tiffs. They still look deinterlaced in FCP timeline and exported to DVD on my iMac computer monitor.
Final output of DVD will be on this monitor:
Specifications:
Ikegami
Model: VCM-2101
Resolution: 450 TV Lines (Horizontal)
Should I crop the images to 450 horizontal pixels or the double of that 900?
How can I match the sequence or the images settings to avoid the flicker and deinterlaced look on that monitor? I am not able to test the image by having the monitor next to computer.
Compressor:
I used custom DVD settings in Compressor for 90 min best quality DVD. Tried the Porgressive and "Same as Source" in Output field.
In "Crop to" and "Padding" I set for preserve source aspect ratio and letterbox area of source.
I followed the advices from below and I still did not resolve the problem. Please is there anythign else I can try?
Thanks a lot..
Re: Poor Quality Stills
Dec 19, 2006 4:08 PM (in response to Steve Braker)
Things to try (In increasing order of image degradation)
- (in FCP) field order>none
- (in FCP or Photoshop) reduce whites by 10% - reduces overly bright areas
- (in FCP) flicker filter - minimum
- (in Photoshop) motion blur>vertical> .2 - .5 pixels - blurs vertically only
- (In FCP or Photoshop) Gaussian blur> .2 - .5 pixels -blurs both horizontally as well as vertically
- (in FCP or Photoshop) deinterlace - throws away half the image and is generally not appropriate on scanned images

Dear Russ,
Thank you very much. Yes, there is something else in the sequence, old documentary, 768 x 570 (no field dominance, 25fps, Apple ProRes 422) but the images are more imporant.
make a progressive sequence with square pixels. (I am partial to 720P, 1080 should work – or 540). Choose Pro Res 422
Do you mean that I should make a sequence in FCP with these settings? If yes, how can I set a "progressive" sequence? I dont see a setting for output field in FCP sequence settings, lnly in customizing Compressor output DVD format.
Also: "720P, 1080 should work – or 540" are you talking about Frame size? If so, to set in Compressor or in FCP?
If you have interlaced material, then de-interlace before you bring it in. If you don't have interlaced clips, don't de-interlace.
The images are not interlaced after I crop them, apply motion blur filter in Photoshop but look interlaced in FCP timeline after I import them and even to the same as photos sequence in FCP timeline.
Please help and thank you for your comments.

I am exporting a Pages document to Epub and Pages is compressing my jpg images. How do I keep the original jpg size during the export to epub process?

I am exporting a Pages document to Epub and Pages is compressing my jpg images (I think to 72 dpi from original 600 dpi).
How do I keep the original jpg size during the export to epub process?

We are still trying learn how to use Pages to build ePub documents with high resolution graphics that will expand clearly when they are tapped. Very large screen shots are my example here.

How to export a whole process for a single image.

Good morning.
I would like to know how I can export a whole process for a single image. Is it possible? With that I can print of the way that goes better.
Thanks.

Hi Raghavendra,
Thanks for answering my query. I have created a transport request and exported the folder I need to take backup of. But when I tried testing import of the same request I am getting following error. Do you have any idea what is the cause of this error?
com.sap.security.core.server.destinations.itsam.DestinationRuntimeException: com.sap.security.core.server.destinations.api.DestinationException: [_DestinationServiceAuthorization1005] Code-based destination service access denied to component sap.com/cafeugpuiadmin. Access to security-relevant internal destination properties (e.g. passwords, tickets, etc.) is restricted to few selected engine components and not generally available to any service or application.
Kind Regards,
Urvashi

Motion blur issue once exported to DVD through Encore

I have 59.94 HD footage. I edit it, export it through Adobe Media Encoder to Mpeg-2 DVD at 29.97, drop-frame, lower field dominance. I then import that .m2v file into Encore, and then export to DVD, without re-transcoding or encoding anything. The DVD plays back with a 24p-like jitter, or blur to it. I do not understand this. After encoding the .m2v file, I went back and played that on windows media player, and other media players, and the video played back as it should originally, very smooth. Why is it that in between creating the .m2v and exporting the DVD in Encore, I am getting this 24p-like blur/jitter to the video? Does it matter that some of these videos I am putting to DVD-DL and are quite large? Hope someone can help. Thanks. Any other info needed, I will supply for you.

Matrox, velocity and anyother hardware based NLEs use a 720 x 486 timeline. I've exported countless SD files through AME and the m2v files played fine through a Windows media and VLC, They also imported and burned to DVD with Encore flawlessly. SD is not the issue at all.
The problem is as stated in the original posting is.
I export the HD timeline(59.94) through AME as a MPEG2-DVD (29.97 Lower field) and the file plays fine in the WIndows Media Player and VLC. No jitter. Perfect
It's when I put the m2v encoded from a HD (720 x 1280 59,94 frame rate as a MPEG2-DVD in AME ) in encore ( do not transcode ) and then burn to a DL DVD. When the DVD is played back, the jitter issue arises.

First Video Export to DVD Question

Hi - I have my first ever video export from Premiere to a DVD and I'm a little nervous about it. My footage will be shot with the Panasonic ACHD (I think that's the model as I don't have the camera with me here) and the camera is set for 1280 x 720 at 24 FPS.
I was looking through the export settings in Premiere CS4 and found the MPEG-DVD and MPEG Blue Ray settings. When I select MPEG-DVD, I notice that two vertical bars are in each end of the output; when I select MPEG Blue Ray, there's a setting in there that makes those bars go away and the picture fits the dimensions perfectly, so it looks like I can use those settings.
My question is - after I export this file, how do I actually get it on the DVD disk? Should I export it like above and then use Adobe Encore to burn the disk? Or is there some other method?
Any help is appreciated. Thanks.

Your original file is HiDef, a DVD is Standard Def at 720x480 so you will see a difference from original to DVD
You may not use BluRay files on a DVD... see above
You use PPro for editing, Encore for authoring... reading below
The individual CS5 pages also have links to the CS4 user guide pages
CS5 User Guides - online and PDF (right click PDF link to save PDF to your hard drive)
http://blogs.adobe.com/premiereprotraining/2010/08/help-documents-for-creative-suite-5-pdf -and-html.html
Here Tutorials
http://forums.adobe.com/thread/913334
http://forums.adobe.com/thread/845731?tstart=0
-and http://forums.adobe.com/message/3234794
A "crash course" http://forums.adobe.com/thread/761834?tstart=0
A Video Primer for Premiere http://forums.adobe.com/thread/498251?tstart=0
Premiere Tutorials http://forums.adobe.com/thread/424009
CS5 Premiere Pro Tutorials http://forums.adobe.com/message/2738611
And http://blogs.adobe.com/premiereprotraining/2010/06/video_tutorials_didacticiels_t.html
And http://blogs.adobe.com/premiereprotraining/2010/06/how_to_search_for_premiere_pro.html
CS5 Tutorials http://bellunevideo.com/tutlist.php
PPro Wiki http://premierepro.wikia.com/wiki/Adobe_Premiere_Pro_Wiki
Tutorial http://www.tutorialized.com/tutorials/Premiere/1
Tutorial http://www.dvxuser.com/V6/forumdisplay.php?f=21
Tutorial HD to SD w/CS4 http://bellunevideo.com/tutorials/CS4_HD2SD/CS4_HD2SD.html
Premiere Pro Wiki http://premierepro.wikia.com/wiki/Main_Page
Exporting to DVD http://help.adobe.com/en_US/premierepro/cs/using/WS3E252E59-6BE5-4668-A12E-4ED0348C3FDBa.h tml
And http://help.adobe.com/en_US/premierepro/cs/using/WSCDE15B03-1236-483f-BBD4-263E77B445B9.ht ml
Color correction http://forums.adobe.com/thread/892861?tstart=0
Photo Scaling for Video http://forums.adobe.com/thread/450798?tstart=0
-Too Large = Crash http://forums.adobe.com/thread/879967?tstart=0
After Effects Tutorials http://www.videocopilot.net/
Authoring http://www.videocopilot.net/tutorials/dvd_authoring/
Encore Tutorial http://www.precomposed.com/blog/2009/05/encore-tutorial/
And more Encore http://library.creativecow.net/articles/devis_andrew/
Surround Sound http://forums.adobe.com/thread/517372

White lines on movie exported in DVD

ehi guys. I did just a nice movie with the suggestions of some members of this forum but at the end the quality of a 30minutes movie exported in DVD was not so much principally because of some white lines present in some pieces of the movie. These white lines are not clearly detectable, but still they disturb the vision. I guessed that this effect was due to the low ram of my laptop (512MB). is that correct?

It sounds like it *could* be an interlacing issue, especially as it appears on the TV, and not the computer. Chances are that the computer's progressive scan masks this issue, while the TV's internaced display shows it.
Now, are all of the source Clips on the same Timeline the same? Were they all Captured via PE from a miniDV camera, over a Firewire connection, or are the from mixed sources? Having this problem come in during the play of the DVD indicates that it might be some of the source files, but not all of them.
More detail on the Clips would help. In the Project Panel, you can get the properties of each of your source Clips. Listing those would be a good start.
Good luck,
Hunt
[Edit] Antonio,
If it is a Field Reversal interlacing issue, you might get some useful information from this current discussion.

Poor DVD Quality when exporting to DVD

I have an HD timeline with XDCam footage 1080i. I have been trying to export to DVD and everytime I export I get poor quality video. The image shows distortion and pixelation. My client is not very happy with the final product and I'm just running out of asnwers. I have tried exporting using Dynamic Link, Media Encoder and I get exactly the same result. I have tried exporting the first 15 min with same results. Jagged edges, etc.
I just upgraded to CS5 from CS4 hoping to resolve the problem and I get the same result. I only have the problem while exporting to DVD in MPEG format. Blu-Ray format works great.
Any help is greatly appreciated.

Hi Ann
    Here are the specs of my PC.
     Dell Workstation T7500
     12Gb RAM
     Quad Core Xeon E5520 2.27 CPUs
     Vista 64Bit OS
     Terrabytes and Terrabytes of RAID storage. Too many to mention.
I can edit HD content in real time and works great the only issue I'm having at this point is just Encoding HD to SD. The encoding is normally done fairly fast, except for HD wich takes almost a whole day to encode when delivered in HD. Right now is taking longer because I'm trying to go from interlaced to progressive I guess.
Question regarding your settings.
My settings are different than yours on:
     Quality = 5
     Field Order = Lower (Could this be the problem?)
Thanks

Poor video Quality when exporting to DVD

I cant seem to get a clear video. I am downloading from DV from a canon and the quality is sentational.
When on the time line averything is brilliant. When rendereing everything is still ok.
When exporting to DVD it goes pear shaped. I have tried dozens of different variations with the same results.
I am in AUstralia and am using PAL.
I get motion blur and what appears to be very poor quality result after exporting.
Help... I dont have much hair left.
Premier Pro Tragic

@Harm,
"Pear-shaped" (or sometimes "fruit-shaped") is a euphemism meaning that the effort has gone awry; it was a mess.
@John,
Export to DVD is a PPro 2.0 function; in CS3 it is now Export to Encore. Is that what you meant?
First thing is to check the field orders of your source material and of your export settings. Don't invert them, and don't deinterlace interlaced footage.
Perhaps a short list of the settings you have tried (and why you chose those settings) would help us help you.
-Jeff

My Imovie looks great on mac but it is discolored and grainy after I export to dvd.

My Imovie looks great on mac but it is discolored and grainy after I export to dvd. I need help, it looks awful when projected even playing from my mac.

It's my understanding based on what another long time contributor stated that Share to iDVD converts direct to a MPEG-2 format and drops it directly into the iDVD Project for you. Share to Media Browser saves it to .MP4 (actually .m4v which is what apple uses for iTunes video,etc) then that gets converted by iDVD into MPEG-2. So something about the export direct to MPEG-2 when you choose Share to iDVD is introducing the problem. That's why Share to Media Browser seems to get around that limitation, it uses a different encoding path altogether.

HDV vs. DV: Exporting to DVD process???

Similar Messages

Maybe you are looking for