Header condition value is changing in Invoice compare to Sales Order

Hi,
I have created one Sales Order with five line items and total quantity is 100 units. I have one header condition type and the value is 1000 USD in Sales Order.
Now I have created delivery and changed the quantity from 100 units to 105 units..
And than I  have created Invoice. If i check the Header condition type value now it it 1100 USD instead of 1000USD(header condition type value should be the same as in Sales Order)
Can anyone suggest me why the header condition value is changing in Invoice where as it should be as same as in Order?
Thank you for your support
Best Regards
Amjathpasha

Hi Amjad,
You might check in copy controls for the Pricing type if the prices are getting re-determined at the time of billing.
Although, if it is, the value should have been 1050 USD and not 1100 USD.
As you know item condiitons for all the items are added up to the header, you might want to analyze item conditions as well.
Also, since you are delivering 105 units instead of 100, do you still want the system to charge for 100 units? Or is it something related to under-delivery/over-delivery tolerance?
Regards,
Amit

Similar Messages

  • Condition value currency based on amount currency in sales order creation

    Hi all,
          I have a requirement where during creation of a sales order with line items in the conditions tab where if condition type is EDI2 the amount currency should be USDN and accordingly condition value currency should also be changed to USDN.
    I found the exit to acheive this and succeeded in changing the amount currency to USDN but condition value  currency is also changing but for all above condition types.
    I am using form userexit_field_modific_kzwi.
    loop at xkomv where kschl = 'EDI2'.
    XKOMV-WAERS  = 'USDN'.
    MODIFY XKOMV INDEX SY-TABIX TRANSPORTING WAERS .
    select single waers into komk-waerk from TCURC where waers = xkomv-waers.
    endloop.
    Thanks & Regards
    Jerry

    Hi Vindo,
    Thank you for your replay.
    There is no Net value column in pricing procedure. Am able to change the Net value in the condtion tab of  Item level but the problem is , the change is  not  reflected in condition tab of sales order header net value.This is creating a problem when we try to post the invoice document .
    Cheers,
    sravan.
    Edited by: Rob Burbank on May 7, 2010 4:30 PM

  • Condition value of JMOD not appearing in the sales order.

    Hi all,
    Im encountering a peculiar situation where the conditon value of JMOD is not showing up in the sales order..It is however showing the tax rate.. Pls suggest.
    thanks and regards
    Joe

    Hi joseph
    some soution for you I googled for you
    one example like yours i am just copying and providing info for you i dont know whether i can copy link or not here
    here is the solution
    I'm using TAXINJ procedure with JFACT as the pricing procedure for sales.
    Here, I've maintained in FTXP, for IN00 and taxcode V1(new one defined),
    taxes as desired and JMOD = 16%, AED as 2%.
    But these values are not getting picked up in the pricing in sales order.
    I'm keeping UTXJ correctly. I tried with % of UTXJ with 100%.
    In the pricing analysis, I see that the condition record for JMOD is found correctly with 16%.
    But it appears in the condition items as 0%
    solution:
    Check whether you have maintained the tax classification in material master and also check whether u have defined the same tax classification in VK11 for UTXJ, where u assign the Tax code.
    Also check for customer tax classification. And check what you have maintained in J1ID. System will first search for values from J1ID, and then in FTXP.
    And have you a sales pricing condition like JEX2 which is a copy of JMOD ? The value of JEX2 gets posted for Excise account key. This ensures that the cost accounting of excise value paid is done correctly - account key EX2.
    I'm maintaining TAX classifications correctly in the material master, customer master and final tax classification for plant also is set correctly.
    As I told, JIN1, JIN2, JIN4,JIN5 are picked up correctly and calculated. Problem is only for Excise.
    And these values are getting copied initially, before I put PR00 manually.
    Once I put PR00, all the conditions are set to zero back
    Then after entering the price manually, u do the update pricing in Conditions View.
    See, I have not altered any thing in the standard JFACT procedure. That means sales condition is there for JMOD to enable account posting..
    Now, I've changed Tax category in OVK1, and put UTXJ alone there and now, JMOD is getting picked up and is calculating the value..
    But note that I've maintained 10% as JMOD in FTXP.. and 8% in the J1ID excise rate maintenance for chapter ID.
    Can I do away with Excise rate maintenance for chapter ID. So that I will get the % maintained in the FTXP..
    did the tax code pick up correctly... did u maintain the chapter Id and excise rate fro teh chapter ID
    I could solve the proble..
    In the excise group assigned to the plant, I had to check on the indicators, SED and AED.
    Hope its clear your issue.
    Regards,
    Krishna.

  • Change End date of billing plan/invoice plan in sales order item(fpla-erdat

    Hi Experts,
    Could you please help to me regarding this issue.
    I need to change  End date of billing plan/invoice plan  in sales order item  of  "billing plan" Tab.( FPLA-ERDAT) for all line items. It is not a one sales order,more than 1000 sales orders.
    How can i change those end date of billing plan for all line litems and all sales orders ( i have input file with sales orders, items, dates.)
    Thanks
    jaya

    Hi ramki,
    I tried with using  MASS  T.code ( bus2032 Object type).
    There are no field  related to Billing plan end date?.if case i done wrong ,tell me what are steps while using MASS T.code.
    now what i can do. or explain
    Thanks
    jaya

  • Make Net Value Field at item level Editable in Sales Order

    Hi
    All pricing in our system are manual .
    So the client wants to change the Net Value Field in Credit and Debit Memo Request to be Editable ( Currently it is not modifiable)
    Plz suggest how to g about it.
    Do i need to use Userexit_ Field_ Modification, if yes how , The field VBAP-NETWR.
    REgards
    Rohit

    Hi Yadav
    Changing Net Value will effect the updation of various tables ...so u r right not the correct approach .
    Can i put condition type and its value in Credit Request Memo and its value aditable same as in screen for Sales Order .if yes how , changing screen sequence group in credit memo request is creating problems
    Regards
    Rohit

  • Two invoices for one sales order

    I want to create two invoices for one sales order
    Scenario is like to create sales order for value of 100 $, and I want to send order reference billing after saving the sales order for 10% of order amount
    I would say 10% of 100 $
    And after delivery I want to issue a invoice for 90 %( rest of the amount) which is delivery relevant invoice.
    Both invoices will be relevant of accounting.
    Would any body suggest this, how it would be mapped it in to SAP.

    Hi Suresh,
    It is possible in Partial billing. Maintain the Billing plan and create a plan with the inputs as u specified.
    Go to IMG-SD-Billing-Billing plan.   Do ur own configuration for Billing plan.
    Now in Sales document creation mode....header details-Billing plan, U block the billing schedules and as per ur requirement , remove the billing block and create billing document.
    If u configured Account detrmination procedure, U wld get the accounting document wrt billing document.
    Hope this wld help U.
    Regards,
    Praveen

  • Single invoice for multiple sales orders

    Hi all,
    When delivery order is created based on Collective processing, Billing document is created based on delivery order for delivery based billing.
    But, is it possible to filter the line items in the Collective delivery order further for billing? Based on customer PO number, etc.
    That is, one Invoice for each Sales order or each customer PO number from the delivery document.
    Billing based on Sales order is one solution, which is not possible in the current Bussiness scenario.
    Could anyone suggest some other solution?
    Regards,
    Jennifer Smily.

    Hello Jennifer,
    if I understood well you have: more sales orders (everyone wiht its PO number), delivered togheter within one delivery.
    Then you bill the delivery, and you need to create one billing document for every sales order.
    Is it right my understanding ?
    If so you could simply customize the copy control (transaction VTFL) at header level setting field 'Assignment Number' and/or field 'Reference number' with 'A' or 'B'.
    In this way field VBRK-ZUONR and/or VBRK-XBLNR of billing document is filled with PO number or sales order number, and one billing document for every sales order will be created.
    Best regards,
    Ivano.

  • Change the Profit Center in Sales Order line item's Account assignment tab

    Hi Gurus,
    I need to change the Profit Center at Sales order Line item in Account Assignment Tab. Currently  The Profit center is coming from Material Master for the Line Item's Material as default but I have to change / overwrite  that.
    Can any body provide me how can i achive that means
    Any User exits, substitution or any thing ?
    I tried MV45AFZZ but i am not able to find out the right place where I can change COBL-PRCTR.
    Sony

    Hi
    There is perform which moves the values to VBAP field.
    This PRCTR field is stored in VBAP (i.e., SO line item table)
    USEREXIT_MOVE_FIELD_TO_VBAP
    Hope it works.
    VVR

  • How to create an Invoice for the sales order using the T-Code VF01

    Hello Experts,
    How to create an Invoice for a sales order using the T-Code VF01?
    Thanks in advace,
    Suma

    hi,
    Make the following settings-
    1. Create sales document and billing type
    2. assign billing type in sales document type config VOV8
    3. Activate itemcategory as sales order related billing
    4. Maintain copy control header and item level between sales order and billing
    5. Maintain pricing procedure for sales order and billing
    6. Define Output procedure in case to print invoice
    Regards
    Goutham

  • How to control Changing of item category in sales order Manually

    Hello Gurus,
    How to restrict manual changing of item category in sales order?
    Reason for it:
    When ever they want to give some free goods to customer , they are changing Item category in  Standard Sales order at item level  then deliverying free goods to  customer
    looking for your inputs
    Thanks in advance
    Regards
    Venkat

    Hello,
    There are two possible ways:
    1. In Item Caterogy Determination remove the Manual Item Categories so that system will determine the Item Category only from defined options.
    2. Use T-SHDO - create Screen Variant & make the item Category Feild as Display only.
    Hope this helps..
    Thanks,
    Jignesh Mehta

  • Can't change quantity when copy from Sale order for Delivery

    Hi all!
    Can i use authorization for can't change quantity when copy from Sale order for Delivery.

    Tien,
    Approval will not work when you have mutiple rows of data.  You would have to work with SP Transaction Notification
    There has been threads before on the forum on the same topics.
    Block the Quantity in Sales Delivery
    Approval Procedure for chaning quantity in Delivery Document
    Suda

  • How to get COUNT of  Invoice No and  Sales Order No from Multiprovider

    Hello Guys,
    I have a scenario like below. I have 2 info cubes (1) Billing Item Info cube (2) Sales Order Item Infocube which stores Item level data in infocube. I created Multiprovider for these Sales Order Item Cube and Billing Item Info cube.
    Now in My Multiprovider, Invoice No and Sales Order No gets repeated no of times because one Invoice and One order will have no of Materials. I have a requirement to count Total No of Billing Document and Total No of Sales Document for a Day in the BEx Report. I was thinking to use COUNT function but if Sales Document or Billing Document gets repeated then it will count those records which i don't want. correct me if i am wrong. 
    How to get Total no of Billing Document and Total no of Sales Document from a Multiprovider where i have Item level data is stored ?
    Regards,
    Komik Shah
    Edited by: Komik Shah on Aug 20, 2011 5:33 PM

    Hi,
    Count can be achieved as per the following document. Create for Billing Doc and Sales Doc separately.
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/009819ab-c96e-2910-bbb2-c85f7bdec04a
    Regards,
    Suman

  • Changing proposed delivery date in sales order for one specific sales org

    Hi All,
    I want to change proposed delivery date in sales order automatically for one specific sales org only without changing lead time in VOV8.
    For that can I use MV45AFZZ. But it is asking access key to make changes. Is there any other user exit for the same. And how does exactly change it.
    Thanks in advanced.
    Points will be awarded.
    Regards,

    EXIT_SAPFV45E_001 has nothing to do with this - it is meant to update the purchase order from a sales order. It might not even be triggered if the sales order has no link to a purchase order.
    USEREXIT_SAVE_DOCUMENT is not really good for this either, because the delivery date has to be changed before that. If memory serves, it also influences the schedule lines and probably the ATP check and such. I would strongly advise against it. One of the other routines in MV45AFZZ should do just fine, USEREXIT_MOVE_FIELD_TO_VBAK for example.

  • How to change the Profit Center in Sales Order

    Hi Gurus,
    Previously they setted the profit center (YB999) in sales order, now i want to change the profit center and need to give the amount into this profit center 100500.
    So, could you guide me how to change the profit center in sales order.
    Thank you for your replies.....
    Thanks & Regards,
    Chandrababu.B
    Edited by: Chandrababu Naidu on May 25, 2011 12:44 PM

    Hi
    If this SO is processed partially - i.e. transactions happened - You cant change it
    You can use ABAP and change it in Debug mode, but not advisable... Better to short close the SO and open a new SO for Balance qty
    br, Ajay M
    Edited by: Ajay Maheshwari on May 25, 2011 5:10 PM

  • Change of partner analyse in sales orders

    Hello,
    I changed the partner analyse for sales orders and added a new mandatory partnerrole.
    In new documents the partner analyse works fine, but in the existed sales documents I cant´t see, that a mandotory role is missing.
    How can I see that this role is missing in the exsting documents???
    Thanks for info
    Nicole

    You can create a custom report but there is no standard way to do this.
    When a document is created in SAP, it is a "snapshot" of that configuration, master data, and information as it exists when the document is created.  On the SD side there are a few things you can influence, for example, SAP contains some standard tools for mass updating of pricing information.  Most of the document exists in its unchanged state though. 
    You *may* be able to use VA05 and do this (although I doubt it, no system in front of me right now).  Other than that transaction or a custom report there really aren't a lot of options.
    If you are familiar enough with the tables, you can do a "quick view" or an ABAP Query to get the info.  However the SAP partner table is recursive so to avoid getting lots and lots of duplicates you will either have to add some code to a full query, or do offline manipulation of the data.
    If you're looking for soild SAP experience to help through some of these hurdles, please contact me.
    Bill Wood - President
    R3Now Consulting
    http://www.r3now.com SAP thought leadership!
    Platinum SAP Solutions
    (704) 905 - 5175
    http://www.linkedin.com/in/billwood

Maybe you are looking for