Header data not coming from vendor master when creating SA using BAPI

Hello,
I am creating SA using BAPI_SA_CREATE. I am passing the vendor code and other header related data in the header table of the BAPI.
SA is created successfully with all the data that is passed to the BAPI. Now if the payment term and inco terms data is passed initial to BAPI then this data is not taken from vendor master. This data appears blank in SA.
Shouldn't this data be picked up from vendor master as they are maintained properly in vendor master?
I just need confirmation whether BAPI picks or not from vendor master if the data (payment term and inco terms) passed is initial.
Thanks and Regards,
Saba

Hi,
Are u passing X to corresponding fields of HEADER structure what ever you have populated in HEADER structure .

Similar Messages

Payment method not defaulting from Vendor master data

Hi All
I am running F110 payment run. In the Payment proposal SAP is not pulling payment method from vendor master data for some invoice. we have like two payment methods , Sap is defaulting payment method for one type of payment method and not defaulting for the other...What could be the possible reasons?( for both the invoices We are not maintaining any payment method)

Hi
In F110 if payment methods are different from vendor master data and payment methods mentioned in parameters tab it will take payment methods from parameters tab, so that you have to give both payment methods in parameters tab so that it will consider both.

Data not coming from DOE to Mobile After defining Rule for device attribute

Hi All,
I have created a DO and rule for it.In case of Bulk Rule for all definition when i triggere extract from Portal then all the data comes to outbound queue but when i define rule for Device attribute then no data comes to my Outboun queue.Here is the scenario what i am doing :
1. I have order header in my backend which has a field named "Work_Center" and this will be criteria field.
2. In CDS table i have all the records for all the work center.
3. Now in RMM under customized , i have added an attribute named "Work_center".
4. Now i defined a rule with Device attribute mapping and activated the rule.
5. Now on Portal i assigned this data object and in the device attribute tab i assigned the value(this value exist in CDS table for few orders) of a Work center to the attribute "Work_Center" .
6. Then i triggrere extract but its Outbound queue is empty, what could be the reason.
Is my approach is correct
Regards,
Abhishek

Hi Abhishek,
You can check one ore thing, after you have performed all the steps till step 5, i.e. just before triggering
extract. Check if the AT table for ur DO has entries based on the criteria specified by you...
1. In the workbench click on the Data Object, and then right click and select "View Metadata".
2. Select Distribution Model tab.
3. Now select your DO's Association table.
4. For the input field DEVICE ID specify your corresponing device id,and also for status field specify it
as "I" and execute
If there are any entries now in the AT table, and on triggering extract if they are not coming to the
outbound Q there is some EXTRACT Q blocked. And is there were no entries in the AT then the rule
specified is not the satifying.
Thanks,
Swarna
Now if you have entries w

Data Not coming From DSO to Cube

Hi All,
I have data in DSO. When i run the DTP , request status is green.
Now when i go to cube and see the data the request has came but data has not transferred .....
The Request Status is green in cube but data is not cuming....
No transferred data.
How can bring data in cube..??
Regards,
Rohit

Hi,
When you loaded the DSO......after that are you loading the cube for the first time?If so .....and still data is not coming..then check if the last loaded request somehow got deleted from the DSO....
If after loading the DSO....you have already loaded the cube...and this is the second time you are loading the cube.........then obviously it will pick 0 records...........since delta DTP always picks the fresh new request..........if there is no new request in the source .......then it will pick 0 records.......
Also both the cased are not working.........then check the End routine or Start routine.if any.......
Thanks and Regards,
Debjani.......

Bank account data is deleted from vendor master.

Hello,
My user wanted to change in the vendor master data Bank Account Number and VATnumber . So she deleted and entered new number for both . We we want to give confirmations we get confirmation only for VAT number . We saw in the field changes . There we can see New bank field new as deleted old empty space. More ever Bank accont and VAT account number have been deleted entered in the same manner.
may i know the following things.
1 What will the impact of when we delete and enter a new number and when we modify and enter new number.
2.How do we do create again to confirm the changes (we have designed Bank account num as sensitive field)
Thank you
Chaithra

Hi,
Are u passing X to corresponding fields of HEADER structure what ever you have populated in HEADER structure .

Payment Terms not copied from Vendor Master to PO

Hello,
PO was created for a Vendor and Vendor master has the correct payment terms but they did not get copied to the PO.
Thanks
Megha

Hi Megha,
Did you maintain the payment terms in the Purchasing area of the vendor?
SAP says
Master records have separate areas for Financial Accounting, Sales, and Purchasing. You can specify different terms of payment keys in each of these areas. When you then enter a business transaction, the application in question will use the key specified in its area of the master record.
Thanks
Aravind

Selecting the Bank account from Vendor master when APP is run

Good Morning.
I have a scenario where a Vendor with Multiple bank accounts in the vendor master
Bank account 1 - HSBC UK
Bank account 2 - RBS UK
Bank account 3 - Bank of America US
I need to make a payment for a purchase made from US and he chooses the payment to be made directly to the BOA US account. when running the payment run, can i select the bank account to which the outgoing payment is sent to? using Automatic payment program or manual outgoing payment?
Thanks in advance
Shankar

Hi Gowrishankar,
You can change the house bank while runinng the Payment Program in F110.
Please follow the below steps for your requirement.
F110 --> give the parameters & save. > click on Edit Proposal> Double click on vendor ( it will give you the due invoices tobe paid) --> double click on the invoice document which you want to pay in BOA US > Click on Reallocate button> give payment menthod , House bank , account ID and save.
The next subsequent steps are normal.
Thanks & Regards,
Shashi Kanth.

Check Vendor Master when Creating Customer Master

Hi,
When we create customer master, we would like to check against vendor master for similar names so we can alert the user to link the customer to vendor (for contra purpose).
Is there any standard checks we can configure? If not, user either has to check manually or an enhancement has to be developed.
Thanks.

Hi, exit LXF05U01

How to Include House Number when Creating SO using BAPI

Dear Experts,
I am using BAPI BAPI_SALESORDER_CREATEFROMDAT2 to create a new Sales Order. I can actually create the sales order with all other fields right except for the HOUSE NUMBER in the SHIP-TO PARTY.
For the BAPI_SALESORDER_CREATEFROMDAT2, I have include the table ORDER_PARTNERS with structure BAPIPARNR. But when I check in the structure BAPIPARNR, there is only the field STREET (char 35) but no individual field for HOUSE NUMBER. May I ask how can I insert the HOUSE NUMBER to the Sales Order?
Points will be rewarded for helpful answers.
Thanks in Advance.

Hello,
1) BAPI is not returning the sales order number to the program but when checked from SE37 it is returning the sales order
number.
- are you passing simulation parameter (TESTRUN) as 'X'
2) It is not updating the VBFA (SD flow) table.
- Please use BAPI_SALESDOCUMENT_COPY for copying and updating VBFA table
Thanks
Krish

CRM Header data not getting refreshed in BADI when clicked in New order

We have used a ORDERADM_H BADI, header badi to populate some custom field values.
Step 1) While creating sales order in CRM(CRMD_ORDER), we are giving inputs such as sold to party , material etc.
Step 2) Before actually saving the order, we found that we dont need this order to be created and again click on create new button in the transaction. In order header BADI, order data for the previous order is not getting refreshed. The previous GUID is still there and function module CRM_ORDER_READ still retrieves the old order values which was cancelled in the previous step. It is causing lot of issues and finally giving dump.
basically the previous GUID is not getting refreshed. Please suggest

Pls send the code that you have in the Badi. Did you actually compare the GUIDs manually ? Instead of CRM_ORDER_READ have you tried using CRM_ORDER_READ_OW ?

Header Text PO from Vendor master automatically

Dear Friends
This is regarding automatically adoption of header text in PO from vendor master. I am following these steps
- Maintained customizing as MM>purchasing > PO>texts for PO >define copying rules for header texts .
in this , select the text type ( this is the PO header text ) and click on text linkage and maintain source obj as vendor master and maintain the fixing as blank ( ie text automatically adopt in the target obj)
-Then I wrote text (needed in FR lanugage) to respective vendor in purchasing view
Now When I create a PO, system does not propose any thing under header text
Did I miss anything.
Please respond
Regards
SG

Hi,
1. First I assume the configuration settings are correct
MM- Purchasing -- PO --Texts for PO --Define Copying rules for header text
Here the target text type (in this case the PO text type ) i.e. sequence no. is assigned to the correct source object and text (in this case the vendor text type)
2.If you logon to the system using the language option. i.e. logon id, password and language you get the SAP screens in that language. Now if you try to maintain vendor text in FR and create a PO, the FR Text would get copied to the PO. Now if you go back to the EN logon you ll still find the vendor text in FR. So it is definitely linked to the logon language.
There should be another way for this too.
This is an observation and may help you resolve your issue.

Default Payment terms from Vendor Master not from Reference PO

Hello guys,
I am creating a PO in reference to another PO and payment terms are copied from the old PO but not updating from Vendor Master. Our payment terms are changed very frequent and our users don't want to create a new PO with too many line items so they just copy an old PO.
IS there a way to update payment terms form Vendor Master after copying an Old PO? I know this is pretty standard functionality but just trying to see if we can trick the system,
Thanks
Ronnie.

If so then convert this into an error message ensuring that the correct payment term to appear in the message, that the users need not search themselves and find out for updating the payment term
One thing is that there is no configuration available for you take care of this automatically, there has to be user exit solution.

Full Master Data Distribution in ALE - Vendor Master CREMAS(Full Distributi

Hi Experts,
   I have to do a Full Master Data Distribution in ALE - Vendor Master CREMAS(Full Distribution) using BD21.
   I have already read the blog of Mickel and incorporated the code in Change_Pointer_Read.
   It is still not working. Should I include the code at the end of the Function Module. If yes, how to code at the last as
   I can include my code at the SAP suggest Enhancement and End Enhancement.
   Is there any way I can create the implicit Enhancement at the end of the Function Module.
   I will appreciate any help to make the Full Distribution work.
Thanks,
Mich

Hi,
   Here is the link.
   /people/michal.krawczyk2/blog/2009/06/04/distribution-of-full-master-data-objects-from-change-pointers
   My requirement is to send the whole Vendor Master in a IDoc even though for eg there is only one field change in address field of Vendor Master. Full Master Data distribution. But the program BD21 creates only IDocs with segments where the changes are made in the particular tab like address.
   Is there any Enhancement or way to enforce the whole Master Data(CREMAS) to be distributed.
   I will really appreciate any helpful answer .
Thanks,
Mich

Incoterms to default from Vendor Master not Contract Header

Afternoon all,
Is it possible to default the Incoterms, on a PO, from the Vendor Master instead of the Contract?
I have several contracts with blank Incoterms in their headers (if possible I would like to keep these blank). The Vendor Master contains the correct Incoterms. When I create a PO if I don't enter in the contract the Vendor Master Incoterms default correctly. When I enter in the contract the Incoterms on the PO header will populate blank. Is there a way to prevent this?
Thank you

The Incoterms usually default from a vendor master to a contract.
If your contract has no incoterms, then it just means that someone has removed them from the contract on purpose or they have not been in the vendor at the time the contract was created.
There is a mass maintenance transaction to update all your contracts with the correct Incoterms.
Getting the incoterms from vendor master instead from contract is not the way how SAP is designed, because SAP takes the values always from the most specific source, which is the contract.
If you want it different, then you may have to use an exit or BADI or may even need a modification.

Header Text copy to PO from vendor master

Dear all,
I am trying to pull data storeed in vendor master to PO for header text so that we don't need to repeat to each PO for the vendor.
I tried to link this in "Texts for Purchase Orders" in SPRO ,But not able to link it
B'coz it's not allowing me to add the object of vendor master
so pl guide me how i link vendor master text to PO
Regards,
Vimlesh

Hi,
In customizing ->material management -> purchasing -> purchase order -> texts for purchase orders -> define copying rules for header texts, choose "header text" and click on text linkages. Here you can enter for source object "vendor master", and for source text choose vendor master header text.
And in the FIX INDICATOR for text you have to maintain blank. then it will copy text
This will copy text from vendor master to PO header text.
Please check this and revert back if you need further details
thanks,
santosh

Header data not coming from vendor master when creating SA using BAPI

Similar Messages

Maybe you are looking for