SUB Totals within a Dynamic Data Column

Has anyone ever calculated SUB Totals in a Layout with a Dynamic Data Column?
The TOTAL for all data is expressed on the Data Column tab of the Layout as C(1):C(1) - 0FISCPER / Posting Period is the Dynamic Characteristic. When the system actually displays the 12 columns of data for the Year, the formula for TOTAL is also adjusted - no problem here. But the user also wants SUB Totals, by Quarter, within the Year.
Any insight or suggections are appreciated !
Thanks,
Lyle

Hello,
use variables Q1, ..., Q4 for the quarters and create
data colums as follows
1 Q1 dynamic = X
2 Total C(1)
3 Q2 dynamic = X
4 Total C(3)
5 Q3 dynamic = X
6 Total C(5)
7 Q4 dynamic = X
8 Total C(7)
9 Year Total C(2)C(4)C(6)+C(8)
Regards,
Gregor

Similar Messages

XML Publisher - Dynamic Data Columns Issue

Hi,
I am creating a amortization report where I need to show the amortization schedule for unearned revenue. Customers have signed different years of contract and I need to show the amount as per their remaining contract months. So if there are 2 month remaining in the contract then I should show the data for 2 months only and if there are 10 months then I should display 10 months. If we run the report for both customers then it should display two lines in report. For first customer the data should be only for 2 months and for second row(customer) there should be data for next 10 months. These months should be columns in the report(like excel columns, not rows). I need to display all months in columns instead of rows.
I have acheived that using Dynamic Data Columns as mentioned in the user guide. Everything is working fine except following issues -
1. How to create page level total?_
I have created page total in my template using <?add-page-total:TOTUREV;'UREV'?> and displaying using <?show-page-total:TOTUREV?> but when I run the report in excel format these page total do not display. These columns are static columns not dynamic.
If I run the report in pdf format then the static column total is displayed correctly.
2. When I run the report in excel format then report run fine and it shows all the columns properly but if I run the report in pdf format then the dynamic column are not displayed in their own columns, all the columns are overwriting each other in a single columns itself, its not expanding.
3. How do I get the total for the dynamic columns?_
I need to display the page level total for the dynamic columns also, how do I do that?
4. When I run the report in excel format the 2 decimal places of the numbers are gone(it works fine in pdf output), like 12.50 becomes 12.5 and 14.00 becomes 14. I need to maintain those 2 decimal places. I have tried using <fo:bidi-override direction="ltr" unicode-bidi="bidi-override"><?format-number:CVALUE;'999999D99'?></fo:bidi-override> but this does not solve my problem completely. It shows the values correctly in excel but then I am not able to do any calculation on those columns, looks like it converts them to text values.
Any help is really appreicated. Please let me know if you need the xml template and data file.
Regards
Hitesh

Hi Hitesh,
Can you please upload your RTF and XML template file? I will try to spend sometime on this issue.
Cheers
Sachin

Grouping of chracateristics by using dynamic data columns

Hi all,
I want to create a BPS Layout (BW3.5) with the material in the lead column and a KeyFigures, the year and the salesgroup in the data column. The salesgroup is the dynamic characteristic.
Example:
I want to have:
SG1 2007/ SG1 2008/ SG2 2007/ SG2 2008...
What the system is doing is:
SG1 2007/ SG2 2007/ SG1 2008/ SG2 2008
My question is: how can I change the grouping of the columns from year to salesorg?
Can anybody help me?
Best regards,
Rainer

Hi Rainer,
Thanks for your appreciation.
I thought there is not material in your lead column, okay if your case like that i suggest you like this.
I suggest to .
To choose Layout Category:
1. Key Figures in Data Column
Define data column dynamically for : Sales Group
And make the fiscal year, and material as lead column.
In the data column tab, define the key-figures there and mark Dynamic checkbox.
Or if you want to group based on the fiscal year, you can make the fiscal year as you dynamic data column.
Hopefully it can help you a lot.
Best regards,
Niel.
thanks for the points you choose to assign.

Header description of dynamic data columns dynamically

Hi all,
How is it possible to get Header description of dynamic data columns dynamically??
Thanks and regards,
Harry

Harry,
Don't have the system right now so going by memory.
There are 2 parts - you need to see how you specified the text replacement of the variable. Say on 0fiscper if you specify characteristic value it would show I think 001.2007, 002.2007, etc. If you use one of the text types, it would be based on the description.
I always have to think if I need to put the infoobject name or the variable name in the layout definition in the description part. Off the top of my mind, it would be the infoobject name i.e. 0fiscper for example

Dynamic data column; pdf vs excel output

I have created a amortization report using BIP dynamic data columns. When I run the report in excel format then report run fine and it shows all the columns properly but if I run the report in pdf format then the dynamic columns are not displayed in their own columns, all the columns are overwriting each other in a single columns itself, its not expanding.
Any idea what could be wrong here. Why does it work fine in excel and not in pdf output.
Please let me know if you would like to see the rtf template and xml data file.
Regards
Hitesh

Can you send me the sample xml and RTF ?

Dynamic Data columns

Hi...
Here's my scenario. My layout is keyfigures in lead columns.
I want Calendar Year in the Header. I want the Calendar Year/Month (0CALMONTH) in data columns.
But, the data columns should be dynamically set to the 12 months of the Year I choose as part of the header combination. Example, I choose 2008 as header:
Layout should alow me to enter sales for all months of 2008. So, data columns should become:
Jan 2008 Feb 2008 Mar2008 Apr2008 .....
Sales
I'm open to ideas for other types of layouts also as long as the the months (0CALMONTH) are derived based on Calendar Year.
Thanks...

KJ, thanks for your response.
Dont mean to question your suggestion at all. But is that only way?
I mean to me deriving a calendar year month seems to be a normal practice.
But if thats the only way, could you please provide more insight and possibly an algorithm for the exit? never worked exits before in the cotext of BPS.
Thanks...

Creation of Sub-Totals within Groups

Hi - hope this is me just being a plank but I've hit a brick wall whilst trying to recreate a set of management accounts. So far the report has just two Groups - call them A & B for ease. Group B summarizes the detail and Group A neatly collects the results from Group B.
Group A comprises 6 parts all doing their bit and all the standard Crystal Sub-Totals (Summaries) work just fine. The problem I encounter is when I need to insert another Sub-Total into Group A which summarizes multiple parts of Group A e.g. Part 1 is Sales, Part 2 is Cost of sales, Part 3 is Labour, Part 4 is Expenses, Part 5 is Other and Part 6 is Depreciation. I need to insert a Sub-Total between Parts 3 and 4 which basically gives a total of Sales minus Cost of Sales minus Labour and to then continue with Parts 4 to 6. This is obviously a huge simplification of the issue but an answer to this would let me proceed with everything else.
I've tried creating an line so I can add a formula for this by giving it a name of its own in Group A but it fails to appear on the report. I've also tried the 'Insert Section Below' option and whilst I can suppress it where necessary the formula just picks up values from the last entry on the Detail Section.
Any ideas where I am making some elementary mistakes and is there an easy solution? Many thanks

Hi,
Try to create a manual running total formula for summing the fields with a condition.
Create a @reset formula and place it report header:
formula:
whileprintingrecords;
numbervar i:=0;
Create a @eval formula and place it in group header A:
formula:
whileprintingrecords;
numbervar i;
if {groupname.field} = 'Labour' or {groupname.field} = 'Expenses' then
i:= i + {summary.field};
Create a @display formula and place it in report footer;
formula:
whileprintingrecords;
numbervar i;
Hope this helps!
Regards,
Vinay

Any overhead with sub partitioning within a time based column?

We have a table that's partitioned based on a weekly partition and it has records of Type A and records of Type B and there are processes that are only interested in records of Type B.
Right now the table is partitioned as interval on the timestamp column as a weekly partitioning but I'm considering introducing sub partitioning into the mix based on these record Types.
Is that feasible?

>
We have a table that's partitioned based on a weekly partition and it has records of Type A and records of Type B and there are processes that are only interested in records of Type B.
>
Whether to partition on the 'type' column depends on the data skew and how the type data is accessed.
If the access and skew is such that an index would be used then just use an index - no need to partition. For example if only 5% of the data is Type B then you could probably use an index effectively for accessing only Type B data.
For Type A data (95%) a full table scan will be used and Oracle will skip/ignore the 5% of the data this Type B so no partitioning is needed.
Subpartitioning would be useful if an index won't help filter the data and you want Oracle to filter it automatically.
You will need to either redefine the table (using DBMS_REDEFINITION) or recreate the table to if you want to add subpartitioning.

Dynamic Data Column

Hello!
I've a requirement such that based on data, dynamic columns should be created. I'm able to do this but looping in the rows is not working..
I've done a similar requirement before when all the data are in the same hierarchy but now, data are in different hierarchy.
This is my XML
<IND1>
<IND2>
<LABEL>Hello</LABEL>
<IND3>
<WT>30</WT>
<PRICE>45</WT>
</IND3>
<IND3>
<WT>20</WT>
<PRICE>35</WT>
</IND3>
</IND2>
<IND2>
<LABEL>World</LABEL>
<IND3>
<WT>15</WT>
<PRICE>45</WT>
</IND3>
<IND3>
<WT>25</WT>
<PRICE>36</WT>
</IND3>
</IND2>
</IND1>
There are 2 Labels.. So, 2 tables shd be created with heading as 'Hello' and 'World' dynamically. Below, 'Hello' label, there must be 2 columns 'WT' and 'Price' Headers. Respective data shd be displayed.
I'm able to create 2 headers and below that, WT and Price.. In my data, only the first record of WT and Price is displayed and 2 set of data is not getting displayed. I tried to loop but it's not working.
Let me know if you want more details. I will send out the rtf which I'm doing..
Thanks!
Ganesh.

I've sent a mail to you. Thanks!

Rdl file Tablix sorting. dynamical data columns.

Hi ,
we are having Tablix with 5 columns of data. in that first 3 column data is a static and remaining two columns data will be calculated and populated dynamically on the 4,5 column. it is working fine but when i sort the any of the first 3 columns it is showing
the wrong data in the 4,5 th columns.
can any one help how to over come this.
Advance thanks.
Vijay

Hi Vijay,
If I understand correctly, the values in the fourth and fifth column change dynamically based on the static values in the first three columns in your report. And then you set the sort expression for the data region or for each group, including the details group
in a tablix data region.
I tested the issue in my test environment in the basis of my understanding. I have set the expression in the fourth and fifth column and set the sorting of tablix based on the fifth static column. When running the report, there is no issue.
To resolve your matter, please post the report design and the expression in sorting option’s screenshot to the forum.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

Dynamic Lead Columns / Data Columns

Hi
I want to use dyanmic data columns restricted by a characteristic relationship of another variable.
When I use the characteristic as a lead column, it works perfect, I only see the rows for valid lines.
When I use the characteristic as a data column, I see all possible characteristic values of that characteristics. The ones that are not valid are not ready for input, the ones that are valid are ready for input.
I would like to use dynamic data columns but only display the columns with a valid characteristic relationships (just the way it works when I put the characteristic in the lead column)
Should that work?
Thanks

Enable Zero-Suppression on your column structure. Then in your Query properties, enable zero-suppresion for columns. That way only characteristic values with data will be shown and not all possible characteristic values present in the master data tables. I should note that there should be some data in the fact table which links the keyfigure to the characteristic value, otherwise it will be suppressed.

ABAP Query SUB-TOTALS by Month

Hi,
I am making an ABAP Query and I am trying to create sub-totals per month.
EX.          Quantity         Date
                    1           01/01/2008
                    2           01/02/2008
sub-total        3
                    1          02/01/2008
sub-total        1
does anyone know how i can do this? (create sub-totals based on the date field)
Thanks!

I dont think standard ALV subtotalling will do like this. But there is one workaround
I would suggest you to have one more column named Month. In that column save the month for that row. Then do the subtotalling based on that field Month instead of date field.
Hope this will help
cheers
Kothand

Reg. ALV- Sub total?

Hi Experts,
How to hide the column values in ALV? That is I need to display the sub-total values alone and not to show the other values in the ALV output. Take for e.g
1   2   2 andre
2   3   4 brown
3   5   6 subtotal
2   2    3 A
1   1    1 B
1   1     1 C
1   1     2 D
5   5   7   subtotal
If the alv output is like this means, I want to display the 3, 5, 6 fields alone how to hide the first column colum field values alone i.e 1 & 2. Then in second part of the ALV how to hide the first column values 2,1,1 & 1 alone.
Regards,
Sakthi

Hi Tarun,
Thanks for your reply.
If I give that no_out = 'X' in the sense it will hide the whole column.
I need How to hide the values alone and need to display the column subtotal.
Those values need to be displayed as blank in the output.
How to do that?
The output normally will be like this.
1 1 1 A
1 2 3 B
1 1 1 C
3 4 5 subtotal
1 2 3 E
1 1 1 F
2 3 4 SubTotal
But what I need is
    1 1 A
    2 3 B
    1 1 C
3   4 5 SubTotal
2 3 E
1 1 F
2 3 4 Sub Total
Like this I need to hide a single column values alone not along with sub total values. The first column values should not appear but subtotal value should appear.

How to dynamically calculate sub-total of rows and display when member changes in Hyperion Financial Report

Requirement - I am writing a very large reports from Hyperion Performance Cost management.
Account is in Row. We are taking all level0 members in Row. In columns we are taking Entity,Cost Centers
Current Structure of the Report
41100 Entity1 Cost center1 20
41100 Entity1 Cost center2 30
41100 Entity1 Cost cenetr3 40
41200 Entity 10 Cost center1 200
41200 Entity 10 Cost center2 210
41200 Entity 10 Cost center3 200
Grand Total 1000 ( For Example)
User wants to dynamically add a sub total into the report when account (41200,41100) changes i.e. This is because , its a very large report of 100's of pages,
Future State
41100 Entity1 Cost center1 20
41100 Entity1 Cost center2 30
41100 Entity1 Cost cenetr3 40
sub total 1 --------------------------90 ( This line should be automatically inserted here)
41200 Entity 10 Cost center1 200
41200 Entity 10 Cost center2 210
41200 Entity 10 Cost center3 200
sub total (n) -------------------------610 ( This line should be automatically inserted here)
Grand Total 1000 ( For Example)

Hello,
maybe re-consider this approach and say no to the users who request this. Try to think about other solutions.
Sometimes a "no" helps them more than doing what they ask.
You might export the whole in Excel. Then they can make their subtotals at every line.
Regards,
Philip.

Showing Sub-Totals only for Specific Column in PowerView

Hi,
Is there a way of showing the sub-totals only for specific columns in a PowerView Matrix?
I am only aware of showing the sub-totals for all or non of the columns.
Thanks and Regards,
Justin

Hi Justin,
According to your description, you want to get sub-totals specific columns within columns group. Right?
In this scenario, we can use IIF() function in expression to achieve your goal. The expression will only return the total value when the column value is a specific value, otherwise we can make it return nothing. Try the following expression:
IIF(Fields!Column.Value="[specific value]",Sum(Fields!Total.Value),nothing)
We have tested this scenario in our local environment. Here are screenshots for your reference:
Reference:
Expression Examples (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

SUB Totals within a Dynamic Data Column

Similar Messages

Maybe you are looking for