Header/detail blocks

Hello I need help please. I need to populate records from a child table when the user clicks on a record in the header table . This is fairly easy . The difficulty is that the user needs to be able to edit a field from the child table and there could be 1 to many records. When the user makes a change , I don't want the 'do you want to save changes' error to appear ! Any ideas how to do this please .
As shows in the picture below , the user will only be able to update field 'amt'.When the user clicks on 'declaration_no' from the header table,other records will be displayed ..
http://i42.tinypic.com/fngs3n.jpg
Thanks for any help.

YOu could POST the data in the oN-CLEAR-DETAILS-trigger of the master-block, but then you have to track the form-status on your own.

Similar Messages

How to validate date between Header and Detail Block..

Hi All,
I was trying to find a way where, suppose I enter 'from date' and 'to date' in the header block.then in detail block all 'from dates' and 'to dates' should be restricted between the dates entered in the header block.
Thank you

Or U Can Simply set in the child item lowest / highest Allowed Value
Invoke Property pallete for child date item and set the following
lowest Allowed Value :header.from_date (must be prefix with :)
Highest Allowed Value :header.to_date
siju.koiply

How to get number of lines entered in detail block

Hi ,
Below is my requirement, I am calling custom form from standard RCV transactions form.
Below are parameters : PO NUMBER, RCPT NUM, QTY. These values will be passed from standard form to custom form and these values will be stored at header level in my custom form.
Based on the Quantity, I have to validate my detail block. For eg. If my quantiry is 10, my detail block items should not less or greater than 10.
Can any one please suggest me how to achieve this. I tried SYSTEM.TRIGGER current record etc,. I am getting below issue. If I place my cursor on any other record rather than last record it is throwing error. SO any experts please help here.
Thanks,

You can use a calulated item of type summary for this. set the following propertie for a newly created item in your detail block
-Summary type=Summary
-Summary function=Count
-Summarized block=your detail block
-summarized item=any Required item in your detail block
Now you can check the number of records with that item.

Master-Detail relationship and querying back from the detail block

Hello friends,
Using oracle forms 6i. I have a multi data block. On the block there is a header and detail section. There is master detail relationship present in these blocks. I have a sequence defined, which generates an auto-number.
Now in the detail section say I have 4 records all of which are say invoices and I am populating the details about it. On the 'save' button I have defined a logic which generates an auto- number or a unique number for all the 4 records in the detail section. The unique number is shown in the header section in a text-field.
Now when I query (F11 and then Ctrl+F11) with the help of the unique number i see all the 4 records under it in the detail section. But when I query with the help of one of the 4 records in the detail section it says "fetching more than a single row." I know the same unique number is there for all the 4 records and in the header section I am displaying "number of items displayed" to be 1. That is why the error. But I want that to remain one. How exactly can I develop this functionality of querying the unique number in the header section from the detail block?
Please help as soon as possible.

Hi,
I'd suggest to check this tutorial:
http://www.oracle.com/technology/obe/obe_as_10g/bi/forms/formsmasterdetailobe.htm
Having a relationship between data blocks, coordinates dml actions in both, so no coding is needed to save/update/delete records, forms built-ins do the work.
hope this is useful,
Hugo

Unable to handle the detail block data......

Dear All,
I am creating a form with 3 blocks.
Control block,
Header Block,
Detail Block.
First i have entered a record in the control block.
Then i navigate to header block,entered the first record for Header Block.
Then i navigate to Detail block,entered the first record for detail Block.
then i again navigate to Header Block..
Now the Problem comes....
As i am Trying to enter second record for header block,the pop up comes as "Do you want to save the changes".
Condition 1:
i dont want that message to appear for every header record i enter.
Condition 2:
For every header record i enter,Corresponding detail record would have been entered.i want that detail records to be retained if i am clicking that header record, as i have already created relationship for both header block and detail block.
How can i resolve this.
Thanks in Advance....

HI
Basiclly you should create - Master ->Details Replation with both of your data block. This will solve all your problem.
After creating the Master/Relation Relations - all your navigation and data popup will be addressed , if you get this confirmation message, please let me know..that could be due to block changed status.

Unable to see the values in detail block

Hello,
I have a master detail block, when I query the form, I am unable to see the values for a particular field(Column), all other columns appear properly in the details block, Upon checking the same table(s) in SQL ( by using the JOIN defined in the where clause of the relationship in Forms) , it shows the relevant records for all fields. So what could be wrong with the Form, please advise.
Thanks
FM

IQ wrote:
I have just checked the field its a non-database field which is being used as a LOV column to display a value derived from LOV. How do I make this populate at Query time, as obviously this works when the Form is in a insert mode but not for Query mode. How to make it work for Query ? As it for LOV column and non-database filed, ignore my first suggestion.
Does your non-database filed has associate any column ?
For example, you have SUPPLIER_ID (database column) and SUPPLIER_NAME (non-database column). SUPPLIER_NAME has LOV column. And when selecting supplier name from LOV value also assign at supplier_id.
Now to show supplier name when querying, you have to write POST-CHANGE trigger at supplier_id. like
SELECT ASSC_CODE INTO :MST_SUPPLIER.ACC_CODE
FROM ACC_SUB_SUB_CONTROL
WHERE ASSC_ID=:MST_SUPPLIER.SUPP_ASSC_ID;Hope this helps

Issue in displaying header details in ALV report

Hi,
I have used slis_t_listheader and REUSE_ALV_COMMENTARY_WRITE to display the header details in ALV report.I want the details to be displayed as below.
Requester : ----------------------                                                                               Page: 1
Program: -----------------------                                                                                Date:---------
                                                                 Title of Report
But when I use the structure slis_t_listheader to display the header details,all the fields are coming one below the other.
How can I get the fields as shown in the above format
Edited by: Abaper12345 on Jun 25, 2009 7:54 AM

Hi,
Go through following code... its showing the data exactly the way you want....
REPORT TEST3.
TYPE-POOLS:slis.
TABLES:MARA.
*Type Declaration
TYPES:BEGIN OF t_mara,
      matnr TYPE mara-matnr,
      ersda TYPE mara-ersda,
      ernam TYPE mara-ernam,
      END OF t_mara.
*Internal Table
data:it_mara type standard table of t_mara.
*Work Area
data:wa_mara type t_mara.
DATA:i_repid TYPE sy-repid .
i_repid = sy-repid.
*Declaration for field catalog
DATA : fcat TYPE slis_t_fieldcat_alv,
       wa_fcat TYPE slis_fieldcat_alv.
*Declaration for Layout
data : WA_LAYOUT type SLIS_LAYOUT_ALV.
*Initializing ColumnWidth_Optimize For Layout
WA_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
START-OF-SELECTION
START-OF-SELECTION.
*Fetching data into internal tables
PERFORM get_data.
*Buil Fieldcatalog
PERFORM build_fcat.
*Display ALV Report
PERFORM alv_display.
*Build Fieldcat
FORM build_fcat .
wa_fcat-tabname = 'IT_MARA'.
wa_fcat-fieldname = 'MATNR'.
wa_fcat-inttype = 'C'.
wa_fcat-seltext_m = 'Material Number'.
wa_fcat-outputlen = 25.
wa_fcat-col_pos = 1.
APPEND wa_fcat TO fcat.
CLEAR wa_fcat.
wa_fcat-tabname = 'IT_MARA'.
wa_fcat-fieldname = 'ERSDA'.
wa_fcat-inttype = 'C'.
wa_fcat-seltext_m = 'Date'.
wa_fcat-outputlen = 25.
wa_fcat-col_pos = 1.
APPEND wa_fcat TO fcat.
CLEAR wa_fcat.
wa_fcat-tabname = 'IT_MARA'.
wa_fcat-fieldname = 'ERNAM'.
wa_fcat-inttype = 'C'.
wa_fcat-seltext_m = 'User'.
wa_fcat-outputlen = 25.
wa_fcat-col_pos = 1.
APPEND wa_fcat TO fcat.
CLEAR wa_fcat.
endform.
*&      Form GET_DATA
      text
--> p1        text
<-- p2        text
form GET_DATA .
select matnr ersda ernam from mara into table it_mara.
endform.                    " GET_DATA
*&      Form ALV_DISPLAY
      text
--> p1        text
<-- p2        text
form ALV_DISPLAY .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK                 = ' '
I_BYPASSING_BUFFER                = ' '
I_BUFFER_ACTIVE                   = ' '
   I_CALLBACK_PROGRAM                = i_repid
I_CALLBACK_PF_STATUS_SET          = ' '
I_CALLBACK_USER_COMMAND           = ' '
I_CALLBACK_TOP_OF_PAGE            = ' '
   I_CALLBACK_HTML_TOP_OF_PAGE       = 'HTML_TOP_OF_PAGE'
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  =
I_BACKGROUND_ID                   = ' '
I_GRID_TITLE                      =
I_GRID_SETTINGS                   =
IS_LAYOUT                         =
   IT_FIELDCAT                       = fcat
TABLES
    t_outtab                          = it_mara
EXCEPTIONS
   PROGRAM_ERROR                     = 1
   OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform.                    " ALV_DISPLAY
*&      Form html_top_of_page " I_CALLBACK_HTML_TOP_OF_PAGE "
FORM html_top_of_page USING document TYPE REF TO cl_dd_document.
CALL METHOD document->add_text
EXPORTING
    text          = 'Program'
    sap_color     = document->list_group
    sap_fontstyle = document->standard
   sap_emphasis = document->strong.
CALL METHOD document->new_line
EXPORTING
    repeat = 1
CALL METHOD document->add_text
EXPORTING
    text          = 'Requester'
    sap_color     = document->list_group
    sap_fontstyle = document->standard
   sap_emphasis = document->strong.
CALL METHOD document->new_line
EXPORTING
    repeat = 1
CALL METHOD document->add_gap
EXPORTING
     width      = 125
CALL METHOD document->add_text
EXPORTING
    text          = 'This Is Test Data'
    sap_color     = document->list_group
   sap_fontsize = document->LARGE
   sap_fontstyle = document->standard
   sap_emphasis = document->strong.
ENDFORM.                    "HTML_TOP_OF_PAGE
Thanks & Regards
Ashu SIngh

Master - detail block (many-to-many)

Hello, , I have 2 tables:
1-(parts)its primary key : p_id
2-(suppliers)its primary key : s_id
and they have many-to-many relationship between them .
the table Resulted from the relationship is(part_supp)
How can I create master-detail block Based on this relationship.In other words, which of tables will be the master and which of them well be detail.
I am using form 6i ..
please help.....

M3ATH wrote:
Hello, , I have 2 tables:
1-(parts)its primary key : p_id
2-(suppliers)its primary key : s_id
and they have many-to-many relationship between them .Many to many relation between two table isn't a good database design. You have to a junction table between them.
the table Resulted from the relationship is(part_supp)Is this your junction table(part_supp) ?
>
How can I create master-detail block Based on this relationship.In other words, which of tables will be the master and which of them well be detail.If part_supp is your junction table between parts and suppliers then, try this..
Use the junction table as a hidden block, then establish a standard Forms relation between
Parts and (hidden)part_supp then between part_supp and suppliersHope this helps

How can I get a detail block to requery after a database change?

Hi, I have a master/detail form. When the status of the master record changes, I need to update a date in one of the detail records. If I use SQL to update the detail row in the database in the ON-CHANGE trigger of the master block, how can I get the detail block to requery to show the change? When I try doing a go_block from any of the ...UPDATE triggers, it says it is restricted.

wjpenfold,
Do you have a "Relationship" defined between your Master and Detail blocks? If so, you simply need to requery your master block and the detail block will automatically be requeried. If you can't use a relationship, then you can use can create a timer in the trigger that updates the database and then in the When-Timer-Expired (WTE) trigger you can go to the detail block and execute a query. For example:
/* Sample On-Change trigger */
DECLARE
   timer_id TIMER;
BEGIN
....your code here that performs the update....
   /* Now create an instance of a timer */
   timer_id := Create_Timer ('upd_detail',1,NO_REPEAT);
END;
/* Sample Form Level When-Timer-Expired trigger */
DECLARE
   timer_id   TIMER;
BEGIN
   -- Find the timer first
   timer_id := FIND_TIMER('upd_detail');
   IF NOT ID_NULL(timer_id) THEN
      GO_BLOCK('DETAIL_BLOCK');
      Execute_Query;
   END IF;
END;Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

How to display data in detail block from a table.

Dear members,
i have 2 blocks. 1 is master block and another is detail block with multiple records.
the requirement is when i navigate to the detail block the data from a table is displayed in it. using a where clause depend on the value in an item in the master block.
i wrote the following code and tried in when-new-block-instance, when-new-record-instance, pre-block and post-block
but...
DECLARE
     CURSOR ITEM_CUR IS
     SELECT ITEM_ID, QTY_APPROVED
     FROM IN_REQUEST_FORM_DETAIL
     WHERE RF_MASTER_ID = :IN_MASTER_PO.RF_ID;
BEGIN
     FOR ITEM_REC IN ITEM_CUR LOOP
          :IN_PO_DETAIL.ITEM_ID := ITEM_REC.ITEM_ID;
          :IN_PO_DETAIL.DIS_APPROVED_QTY := ITEM_REC.QTY_APPROVED;
          NEXT_RECORD;
          END LOOP;
EXCEPTION
     WHEN NO_DATA_FOUND THEN
     MESSAGE ('THERE IS NO REQUESTS');
END;

thanks dear simon,
i want to display the data from a table not included in this form. and these two tables are connected via a relation.
i have the following tables.
in_master_po
PO_ID pk
PO_DATE
RF_DETAIL_ID fk (in_request_form_detail)
in_po_detail
DETAIL_PO_ID pk
ITEM_ID fk
PO_ID fk (in_master_po)
QTY
the above 2 tables are datablocks connected via relation
the following is the from which i want to bring the data to display
in_request_form_detail
RF_DETAIL_ID pk
ITEM_ID fk (items)
QTY_REQ
i tried my code on the sample tables with scott/tiger there it works good.
thanks
Muhammad Nadeem

How to query the master block based on one of the values in detail block

Hi,
In version 6i forms, I have a field in data block which is not set as a database item. I am using that field to store a value from detail block. If I want to query the form using that field (which represents one of the values from detail block), how do I do that? Any pointers?
TIA,

Do you want to query a master, which contains a specific detail? If so, here's an example how you could do it with a PRE-QUERY-trigger:
DECLARE
vcQuery VARCHAR2(4000);
BEGIN
IF :MASTERBLOCK.THE_DETAIL_SEARCH_ITEM IS NOT NULL THEN
-- Build up an exists Sub-Query
vcQuery:=' MASTERBLOCKID IN (SELECT FK_TO_MASTERBLOCK FROM DETAILTABLE WHERE DETAIL_COLUMN=''' || :MASTERBLOCK.THE_DETAIL_SEARCH_ITEM|| ''')';
END IF;
SET_BLOCK_PROPERTY('MASTERBLOCK', DEFAULT_WHERE, vcQuery);
END;

Problem in mapping xml data with header details from IPM 11g to BPEL

Hi,
I want to map xml data as a supporting content from IPM application to BPEL.
My xml is
<?xml version="1.0" encoding="utf-8"?>
<DocumentFile xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://tempuri.org/Document.xsd">
<Document DocumentType="Invoice">
<DocumentImage>
<Filename>\\10.205.0.209\Img\10883212.TIF</Filename>
</DocumentImage>
</DocumentFile>
If I remove header details from root element <DocumentFile> i.e. modified xml is
<DocumentFile>
<Document DocumentType="Invoice">
<DocumentImage>
<Filename>\\10.205.0.209\Img\10883212.TIF</Filename>
</DocumentImage>
</DocumentFile>
it works fine but i need to pass header details as well.
Please suggest.
Thanks,
Priya

Hi Naveen,
In sxmb_moni the content transmitted to the adapter(RFC)is as follows
<?xml version="1.0" encoding="UTF-8" ?>
- <ns:ZRFID_EQUIP xmlns:ns="urn:sap-com:document:sap:rfc:functions">
- <RECORDS>
- <item>
<FLOC>f1-01-01</FLOC>
<RFID_NO>I006</RFID_NO>
</item>
- <item>
<FLOC>f1-01-02</FLOC>
<RFID_NO>I002</RFID_NO>
</item>
- <item>
<FLOC>f1-01-03</FLOC>
<RFID_NO>I003</RFID_NO>
</item>
- <item>
<FLOC>f1-01-04</FLOC>
<RFID_NO>I004</RFID_NO>
</item>
- <item>
<FLOC>f1-01-05</FLOC>
<RFID_NO>I005</RFID_NO>
</item>
- <item>
<FLOC>f1-01-06</FLOC>
<RFID_NO>I001</RFID_NO>
</item>
</RECORDS>
</ns:ZRFID_EQUIP>
At r/3 side the field floc and rfid_no gets mapped to floc which is of char30
eg floc=f1-01-01I006
rfid_no=

Recommended best practice to fetch detail block based on procedure

HI
I am creating a detail block (Dept)based on procedure which will be populated from the value from master block 'Emp'.
For example,
Detail block 'Dept' will be populated by calling procedure populate_detail(:emp.empno in number,dept.deptno out number) .
But what are the triggers I need to call to populate detail block and at which level?
I was thinking to call a WHEN-MOUSE-DOUBLECLICK on master block 'Emp' level to populate the detail block 'Dept' by calling the procedure and passing emp.empno as the parameter whenever the user moves from one master record to another.
Please advise.
Thanks in advance.

Download the forms 6i examples CD from the OTN website

Duplicate Item in Details Block

Dear Expert,
I written some code for checking of the same item in detail block, when I am using keyboard it is runing ok, but when I nevigate the same from mouse to another item, it will not check the duplicate item, my problem is when I move the mouse from one filed to another my Item-Code will be validate every time when I leave the mouse from One Item to another.
Please give me your expert adive.
s mishra

Hi Mark,
Actually this my code but it doesn't work.....
if :slcl.bulk_question_answer = 'N' then
Set_Item_Instance_Property('SLCL.BULK_ERROR_DETAILS', CURRENT_RECORD, UPDATE_ALLOWED,PROPERTY_TRUE);
elsif :slcl.bulk_question_answer = 'Y' then
Set_Item_Instance_Property('SLCL.BULK_ERROR_DETAILS', CURRENT_RECORD, UPDATE_ALLOWED, PROPERTY_FALSE);
:SLCL.BULK_ERROR_DETAILS := '';
end if;
Please remember I put this code in the when-checkbox-changed trigger the default if YES.
Any further advice or idea are greatly appreciated....
Thanks.
Regards,
Jun

In BDC VA02 i am uploading header details in BILLING PLAN tab.

Hi Friends,
In BDC VA02 i am uploading header details in BILLING PLAN tab.
I am having sales order no in flat file.
While i am clicking BILLING PLAN tab its showing 1 POPUP screen for Milestobe For billing plan (INPUT AS NETWORK NO).
Some sales order nos this popup is not coming.
How to code this bdc?

CLOSED

Header/detail blocks

Similar Messages

Maybe you are looking for