How to display data in detail block from a table.

Dear members,
i have 2 blocks. 1 is master block and another is detail block with multiple records.
the requirement is when i navigate to the detail block the data from a table is displayed in it. using a where clause depend on the value in an item in the master block.
i wrote the following code and tried in when-new-block-instance, when-new-record-instance, pre-block and post-block
but...
DECLARE
     CURSOR ITEM_CUR IS
     SELECT ITEM_ID, QTY_APPROVED
     FROM IN_REQUEST_FORM_DETAIL
     WHERE RF_MASTER_ID = :IN_MASTER_PO.RF_ID;
BEGIN
     FOR ITEM_REC IN ITEM_CUR LOOP
          :IN_PO_DETAIL.ITEM_ID := ITEM_REC.ITEM_ID;
          :IN_PO_DETAIL.DIS_APPROVED_QTY := ITEM_REC.QTY_APPROVED;
          NEXT_RECORD;
          END LOOP;
EXCEPTION
     WHEN NO_DATA_FOUND THEN
     MESSAGE ('THERE IS NO REQUESTS');
END;

thanks dear simon,
i want to display the data from a table not included in this form. and these two tables are connected via a relation.
i have the following tables.
in_master_po
PO_ID pk
PO_DATE
RF_DETAIL_ID fk (in_request_form_detail)
in_po_detail
DETAIL_PO_ID pk
ITEM_ID fk
PO_ID fk (in_master_po)
QTY
the above 2 tables are datablocks connected via relation
the following is the from which i want to bring the data to display
in_request_form_detail
RF_DETAIL_ID pk
ITEM_ID fk (items)
QTY_REQ
i tried my code on the sample tables with scott/tiger there it works good.
thanks
Muhammad Nadeem

Similar Messages

Displaying data in a tree from database table

Hi,
I want to display data from a database table (mara-matnr) in a tree structure. I went through the coding of SBSPEXT_HTMLB. There static data was taken in to wa_tab. But there I want to bring data from a database table into wa_tab. For this I created an internal table without headerline by taking a work area, now how can I move data from this work area to wa_tab record by record.
I hope some one might have worked on this. Plz help me....
Thanks in advance,
Ravindra.

Hi,
take a look at this <a href="/people/tomas.altman/blog/2004/12/13/sdn-blog-how-to-do-internal-tables-in-bsp which explains how internal tables work in ABAP OO.
Furthermore I think you want to do this:
insert <yourWorkarea> into table wa_tab.
A complete mara example would be:
data tab_mara type table of mara.
data wa_mara type mara.
select * from mara into table tab_mara.
*or you can use:
select * from mara into wa_mara.
insert wa_mara into table tab_mara.
endselect.
regards
Thomas

How to display data in combo box from xml file.

Hi All,
        I have the data in xml file.
<jukebox>
    <song>
        <title>When the Levee Breaks</title>
        <artist>Kansas Joe and Memphis Minnie</artist>
        <url>delhi601(www.songs.pk).mp3</url>
    </song>
    <song>
        <title>Better Leave that Stuff Alone</title>
        <artist>Will Shade</artist>
        <url>delhi601(www.songs.pk).mp3</url>
    </song>
    <song>
        <title>Walk Right In</title>
        <artist>Cannon's Jug Stompers</artist>
        <url>delhi601(www.songs.pk).mp3</url>
    </song>
</jukebox>
and i want to display the only url in combo box list. for that how can load this xml file and how can i show.
Can any one help me.
thanks
Raghu.

Raghuvasa,
Get the XML file data into an XML variable in your code, say var jukebox: xml. Then do
combo.dataProvider = jukebox.song.url
or as a shortcut
combo.dataProvider = jukebox.descendants("url")
The latter will pull out elements with tag name url at any depth in the xml structure, so sometimes you have to be careful, but in your case there should be no problem.
Richard

How to capture data in a field from a table then insert them it to a destination table

Environment:
SQL Server 2008 R2
Introduction:
I have three tables. one is staging, the other child, the last one is parent. Both parent and child table have referential integrity
(exam_id) . The definition of the child table is
CREATE TABLE [dbo].child
[ind_id] [int] IDENTITY(1,1) NOT NULL,
[exam_dt] [datetime] NULL, exam_id int not null, [sub_cd] [nvarchar](4) NOT NULL,
[score] [varchar](2) NOT NULL,
The parent table has the following definition
CREATE TABLE [dbo].[parent]
[exam_id] [int] IDENTITY(1,1) NOT NULL,
[pn_id] [char](9) NOT NULL,
[sub_cd] [varchar](3) NULL
when loading 1000 records to the table each record has exam_id generated.
Problem:
I was able successfully to load data from staging to parent but, How would I load/copy from parent exam_id - identity (1,1 )generated upon loading data - to the destination table (child table)
Please help

Environment:
SQL Server 2008 R2
Introduction:
I have three tables. one is staging, the other child, the last one is parent. Both parent and child table have referential integrity
(exam_id) . The definition of the child table is
CREATE TABLE [dbo].child
[ind_id] [int] IDENTITY(1,1) NOT NULL,
[exam_dt] [datetime] NULL, exam_id int not null, [sub_cd] [nvarchar](4) NOT NULL,
[score] [varchar](2) NOT NULL,
The parent table has the following definition
CREATE TABLE [dbo].[parent]
[exam_id] [int] IDENTITY(1,1) NOT NULL,
[pn_id] [char](9) NOT NULL,
[sub_cd] [varchar](3) NULL
when loading 1000 records to the table each record has exam_id generated.
Problem:
I was able successfully to load data from staging to parent but, How would I load/copy from parent exam_id - identity (1,1 )generated upon loading data - to the destination table (child table)
Please help
I could be misunderstanding your requirements, but I get the feeling you're misunderstood. I can see the exam_id (better named parent_id) acts as a foreign key to exam_id (better named fk_parent_id) in the child table.
Without seeing the data though, it's not immediately obvious how you identify the relationship between the two while loading. When the data is supplied, what is the format of the third, source table? Does this include parent and child as single entries including
a relationship ie normalised data?
I don't know if this is useful or not, but when inserting single records into a table with an identity key:
insert into table1 (col2, col3) select 'text1','text2'
insert into table2 (col2, col3, FK, col5) select 'text1','text2',@@identity, 'text3'
@@identity provides the last inserted value. Obviously for larger scale operations this isn't what you're looking for.
In the event your staging table happened to hold parent, child and a source record ID (identity column in staging, but just a secondary indexed column in the other tables) however, you would have the rather easy job of:
update child
set exam_id = parent.exam_id
from child inner join parent on child.source_id = parent.source_id
Really hard to guess without seeing more

How to display dates in half-months?

How can I display dates in half-months from dim_date table? like shown below:
Assume that 8/14/2012 is current date..
07/15 - 07/30 - no. of opties created between those dates
07/01 - 07/14 - no. of opties created
06/15 - 06/30 - ...
06/01- 06/14 - ...
How can display the dates in those buckets? Any ideas appreciated.
Thanks in adv.

Try to build the same in RPD using the below sql.
I've created a Flag based on W_DAY_D."DAY_OF_MONTH" <= 14 then 'F' else 'S' end
in answers I've got min and max based on exp: min(Time."Row Wid" by Time.Flag)
WITH
SAWITH0 AS (select distinct T31328."PER_NAME_MONTH" as c1,
case when T31328."DAY_OF_MONTH" <= 14 then 'F' else 'S' end as c2
from
"W_DAY_D" T31328 /* Dim_W_DAY_D_Common */
where ( T31328."PER_NAME_YEAR" = '2012' ) ),
SAWITH1 AS (select min(T31328."ROW_WID") as c1,
max(T31328."ROW_WID") as c2,
case when T31328."DAY_OF_MONTH" <= 14 then 'F' else 'S' end as c3
from
"W_DAY_D" T31328 /* Dim_W_DAY_D_Common */
where ( T31328."PER_NAME_YEAR" = '2012' )
group by case when T31328."DAY_OF_MONTH" <= 14 then 'F' else 'S' end )
select distinct SAWITH0.c1 as c1,
case when SAWITH0.c2 is not null then SAWITH0.c2 when SAWITH1.c3 is not null then SAWITH1.c3 end as c2,
SAWITH1.c1 as c3,
SAWITH1.c2 as c4
from
SAWITH0 full outer join SAWITH1 On SAWITH0.c2 = SAWITH1.c3
Hope this helps, pls mark

How to display data from a recordset based on data from another recordset

How to display data from a recordset based on data from
another recordset.
What I would like to do is as follows:
I have a fantasy hockey league website. For each team I have
a team page (clubhouse) which is generated using PHP/MySQL. The one
area I would like to clean up is the displaying of the divisional
standings on the right side. As of right now, I use a URL variable
(division = id2) to grab the needed data, which works ok. What I
want to do is clean up the url abit.
So far the url is
clubhouse.php?team=Wings&id=DET&id2=Pacific, in the end all
I want is clubhouse.php?team=Wings.
I have a separate table, that has the teams entire
information (full team name, short team, abbreviation, conference,
division, etc. so I was thinking if I could somehow do this:
Recordset Team Info is filtered using URL variable team
(short team). Based on what team equals, it would then insert this
variable into the Divisional Standings recordset.
So example: If I type in clubhouse.php?team=Wings, the Team
Info recordset would bring up the Pacific division. Then 'Pacific'
would be inserted into the Divisional Standings recordset to
display the Pacific Division Standings.
Basically I want this
SELECT *
FROM standings
WHERE division = <teaminfo.division>
ORDER BY pts DESC
Could someone help me, thank you.

Assuming two tables- teamtable and standings:
teamtable - which has entire info about the team and has a
field called
"div" which has the division name say "pacific" and you want
to use this
name to get corresponding details from the other table.
standings - which has a field called "division" which you
want to use to
give the standings
SELECT * FROM standings AS st, teamtable AS t
WHERE st.division = t.div
ORDER BY pts DESC
Instead of * you could be specific on what fields you want to
select ..
something like
SELECT st.id AS id, st.position AS position, st.teamname AS
team
You cannot lose until you give up !!!
"Leburn98" <[email protected]> wrote in
message
news:[email protected]...
> How to display data from a recordset based on data from
another recordset.
>
> What I would like to do is as follows:
>
> I have a fantasy hockey league website. For each team I
have a team page
> (clubhouse) which is generated using PHP/MySQL. The one
area I would like
> to
> clean up is the displaying of the divisional standings
on the right side.
> As of
> right now, I use a URL variable (division = id2) to grab
the needed data,
> which
> works ok. What I want to do is clean up the url abit.
>
> So far the url is
clubhouse.php?team=Wings&id=DET&id2=Pacific, in the end
> all
> I want is clubhouse.php?team=Wings.
>
> I have a separate table, that has the teams entire
information (full team
> name, short team, abbreviation, conference, division,
etc. so I was
> thinking if
> I could somehow do this:
>
> Recordset Team Info is filtered using URL variable team
(short team).
> Based on
> what team equals, it would then insert this variable
into the Divisional
> Standings recordset.
>
> So example: If I type in clubhouse.php?team=Wings, the
Team Info recordset
> would bring up the Pacific division. Then 'Pacific'
would be inserted into
> the
> Divisional Standings recordset to display the Pacific
Division Standings.
>
> Basically I want this
>
> SELECT *
> FROM standings
> WHERE division = <teaminfo.division>
> ORDER BY pts DESC
>
> Could someone help me, thank you.
>

How can I get a detail block to requery after a database change?

Hi, I have a master/detail form. When the status of the master record changes, I need to update a date in one of the detail records. If I use SQL to update the detail row in the database in the ON-CHANGE trigger of the master block, how can I get the detail block to requery to show the change? When I try doing a go_block from any of the ...UPDATE triggers, it says it is restricted.

wjpenfold,
Do you have a "Relationship" defined between your Master and Detail blocks? If so, you simply need to requery your master block and the detail block will automatically be requeried. If you can't use a relationship, then you can use can create a timer in the trigger that updates the database and then in the When-Timer-Expired (WTE) trigger you can go to the detail block and execute a query. For example:
/* Sample On-Change trigger */
DECLARE
   timer_id TIMER;
BEGIN
....your code here that performs the update....
   /* Now create an instance of a timer */
   timer_id := Create_Timer ('upd_detail',1,NO_REPEAT);
END;
/* Sample Form Level When-Timer-Expired trigger */
DECLARE
   timer_id   TIMER;
BEGIN
   -- Find the timer first
   timer_id := FIND_TIMER('upd_detail');
   IF NOT ID_NULL(timer_id) THEN
      GO_BLOCK('DETAIL_BLOCK');
      Execute_Query;
   END IF;
END;Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Data in detailed block is not getting populated

I have created 3 blocks-: block1, block2 and block3
I have created two relations
1st - between block1 and block2 (block1 is master and block2 is detailed)
2nd - between block1 and block3 (block1 is master and block3 is detailed)
Now, on the canvas I place a text item block1.text_item1 (involved in relation) from block1,
and a text item block3.text_item3 from block3 (this too involved in relation) block3
when I execute the form and I query on master block that is on block1.text_item1, data in detail block that is in block3.text_item3 do not get populated.
Now I place a text item block2.text_item2(involved in the relation) from block2 on the same canvas
Now I again execute the form and query on the master block that is on block1.text_item1, this time data in all three blocks got populated.
I want to place items only from block1 and block3 at present. Could you please tell me how can I do this?
Regards

No, I am not getting such error. Only data is not getting populated.
If I remove item from block3 and place item from block2, then also the data is getting populated.
Item from block1+ Item from block2 -> Data is getting populated
Item from block1+ Item from block3 -> Data is not getting populated
Item from block1+ Item from block2+Item from block3 -> Data is getting populated
Regards

How to display first row value returened from a query as checked as default in a report

How to display first row value returned from a query as checked as default in a report
Example
Parameter 1
Paramerter2
ABD
x(checked)
Test
DEF
JMG
Mudassar

Hi Mudassar,
The issue is caused by the order in which the parameters appear in the report data tab can be difference between our report execution and it failing. In other words, “Parameter2” is execution before parameter “A” due to this issue. We can adjust the parameter’s
order to solve the issue.
If “Parameter2” is parameter “A”, we cannot use that expression. Because fields cannot be used in report parameter expression, if we want to display the first value returned from a query as default value, we have to fill the “Specify values” text box with
the specific value in Default Values dialog box.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

How to display data in table

Hi all,
can any one tell me how to display data in a table when user click on a button. i have created a node with a set of fields from different tables now how to write the logic to display data in that table.
Thanks & Regards,
Naveen

DATA lo_nd_professionaltable TYPE REF TO if_wd_context_node.
DATA lo_el_professionaltable TYPE REF TO if_wd_context_element.
DATA ls_professionaltable TYPE wd_this->ElementS_professionaltable. "internaltable
TYPES: BEGIN OF TY_PFTAB,
       RATEGROUP TYPE /BIC/OIWRATEGRP,
       LEVEL TYPE /BIC/OIWPCSLEVEL,
       FROMDATE TYPE /BI0/OIDATEFROM,
       FROMTO TYPE /BI0/OIDATETO,
       STANDARD TYPE /BIC/OIWSTRATE,
       OVERHEAD1 TYPE /BIC/OIWOHRTE1,
       OVERHEAD2 TYPE /BIC/OIWOHRTE2,
       OVERHEAD3 TYPE /BIC/OIWOHRTE3,
       EXCEPTIONFLAG TYPE /BIC/OIMSECFILER,
       END OF TY_PFTAB.
DATA : IT_PFTABLE TYPE STANDARD TABLE OF TY_PFTAB,
       WA_PFTAB TYPE TY_PFTAB.
SELECT /BIC/WRATEGRP /BIC/WPCSLEVEL DATEFROM DATETO /BIC/WSTRATE /BIC/WOHRTE1 /BIC/WOHRTE2 /BIC/WOHRTE3
FROM /BIC/AGLDCPRTS00 INTO TABLE IT_PFTABLE.
*TYPES : BEGIN OF TY_EXCEPTION,
       EXCEPTIONFLAG TYPE /BIC/OIMSECFILER,
       END OF TY_EXCEPTION.
*DATA : IT_EXTABLE TYPE STANDARD TABLE OF TY_EXCEPTION,
      WA_EXTABLE TYPE IT_EXTABLE.
*SELECT /BIC/MSECFILER FROM /BIC/AGLDCLMLT00 INTO TABLE IT_EXTABLE.
navigate from <CONTEXT> to <PROFESSIONALTABLE> via lead selection
lo_nd_professionaltable = wd_context->get_child_node( name = wd_this->wdctx_professionaltable ).
get element via lead selection
lo_el_professionaltable = lo_nd_professionaltable->get_element( ).
@TODO handle not set lead selection
IF lo_el_professionaltable IS INITIAL.
ENDIF.
get all declared attributes
lo_el_professionaltable->get_static_attributes(
   IMPORTING
     static_attributes = ls_professionaltable ).
lo_nd_professionaltable->bind_table( new_items = IT_PFTABLE set_initial_elements = abap_false ).

How to display data depend upon ListBox value?

Hi Experts and Particularly Hema,
As I asked before how to display data in the ListBox, I got an very good response from you all(particularly Hema) .
Now what my doubt is asked with sample scenario below:
In Screen Painter -
Two fields namely : One List Box and other is I/O used only for displaying purpose i.e., only for output, not for input purpose.
List Box is filled by primary key field(C1) value from one table(T1) when the screen load.(i.e., such code is written in PBO).
Now what I need is :
If the user select any one value in the List Box then it automatically display the corresponding C2 value from T1 in the I/O field.
I think you may all understand what I am trying to ask.Please let me know the solution.
Thanks in advance,
Regards,
Raghu

Simply attached a function code for the listbox... when the user changes the value, you will be able to pick this up in the PAI and loop back to the PBO and redisplay the corresponding output field.
Jonathan

How can i stop transfer data to Trfc queue from a table datasource.help!!!

how can i stop transfer data to Trfc queue from a table datasource.
I create a incorrect view datasource in R3 with wrong join condition,it contain so large data,i want to stop it collect data to sm58.otherwise the system will be ...
i can't find helpful infrmation in sm50 .
in sm37 has a canceled job
Job Ln Job CreatedB Status Start date Start time Duration(sec.) Delay (sec.)
BIREQU_4EFQCFFUQL5ZOAWYOK2L0YCMF ALEREMOTE Canceled 2009-07-10 16:38:59 101,869 0
plesse help me 。

Hi,
You paste the job name in source system in
Tcode :Sm37
Job name as :BIREQU_4EFQCFFUQL5ZOAWYOK2L0YCMF
User:*
Go to job details and get the PID no ,on which application number it is runnug
GO to sm51 ,here you will find the application servers,Select the appriate app server go to that PID.
On left top most you will find option as cancel with out core ..
OR
Ask basics team do the same.
Regards,
Suman
Edited by: suman on Jul 13, 2009 12:56 PM

How to load data to a cube from multiple infosources ?

Hi friends,
How to load data to a cube from multiple infosources ? could u please answer this question .
thanks in advance......

Hi ,
say for example you need to load data to 1 cube from 3 info sources:
1) You need to create 3 update rules for the Cube.
2) Each time you create the update rules. Mention the name the name of the Info source. and create update rules correspondingly.
Regards
satish
Message was edited by:
satish murthy

HOW TO IMPORT DATA MORE THAN ONCE FROM THE SAME EXPORT DUMP FILE?

before asking my question i'd like to mention that i'm a french spoke...
so my english is a little bit bad. sorry for that.
my problem is : IMPORT
how to import data a SECOND TIME from an export dump file within oracle?
My Export dump file was made successfully (Full Export) and then i
tried to import datas for the first time.
I got this following message in my logfile: I ADDED SOME COMMENTS
Warning: the objects were exported by L1, not by you
. importing SYSTEM's objects into SYSTEM
REM ************** CREATING TABLESPACES *****
REM *********************************************
IMP-00015: following statement failed because the object already exists:
"CREATE TABLESPACE "USER_DATA" DATAFILE 'E:\ORANT\DATABASE\USR1ORCL.ORA' SI"
"ZE 3145728 DEFAULT STORAGE (INITIAL 10240 NEXT 10240 MINEXTENTS 1 MAX"
"EXTENTS 121 PCTINCREASE 50) ONLINE PERMANENT"
IMP-00015: following statement failed because the object already exists:
"CREATE TABLESPACE "ROLLBACK_DATA" DATAFILE 'E:\ORANT\DATABASE\RBS1ORCL.ORA"
"' SIZE 10485760 DEFAULT STORAGE (INITIAL 10240 NEXT 10240 MINEXTENTS "
"1 MAXEXTENTS 121 PCTINCREASE 50) ONLINE PERMANENT"
etc........
IMP-00017: following statement failed with ORACLE error 1119:
"CREATE TABLESPACE "L1" DATAFILE 'E:\ORADATA\L1.DBF' SIZE 1048576000 "
"DEFAULT STORAGE (INITIAL 10240 NEXT 10240 MINEXTENTS 1 MAXEXTENTS 121 PCTIN"
"CREASE 50) ONLINE PERMANENT"
IMP-00003: ORACLE error 1119 encountered
ORA-01119: error in creating database file 'E:\ORADATA\L1.DBF'
ORA-09200: sfccf: error creating file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified
--->etc..........
the drive E: with the folder E:\ORADATA didn't exist, but after
all that i created it.
see below, before my IMPORT statement
REM ********************* CREATING USER *********
REM ********************************************
IMP-00017: following statement failed with ORACLE error 959:
"CREATE USER "L1" IDENTIFIED BY VALUES 'A6E0DAA6865E7627' DEFAULT TABLESPACE"
" "L1" TEMPORARY TABLESPACE "TEMPORARY_DATA""
IMP-00003: ORACLE error 959 encountered
ORA-00959: tablespace 'L1' does not exist
IMP-00017: following statement failed with ORACLE error 959:
"CREATE USER "MLCO" IDENTIFIED BY VALUES '56AC6447B7D50467' DEFAULT TABLESPA"
"CE "MLCO" TEMPORARY TABLESPACE "TEMPORARY_DATA""
IMP-00003: ORACLE error 959 encountered
ORA-00959: tablespace 'MLCO' does not exist
ETC.......
REM ********************* GRANTING ROLES ***********
REM ************************************************
IMP-00017: following statement failed with ORACLE error 1917:
"GRANT ALTER ANY TABLE to "L1" "
IMP-00003: ORACLE error 1917 encountered
ORA-01917: user or role 'L1' does not exist
ETC.........
IMP-00017: following statement failed with ORACLE error 1918:
"ALTER USER "L1" DEFAULT ROLE ALL"
IMP-00003: ORACLE error 1918 encountered
ORA-01918: user 'L1' does not exist
-- that is normal, since the creation of the
tablespace failed !!
REM******************************
IMP-00015: following statement failed because the object already exists:
"CREATE ROLLBACK SEGMENT RB_TEMP STORAGE (INITIAL 10240 NEXT 10240 MINEXTENT"
"S 2 MAXEXTENTS 121) TABLESPACE "SYSTEM""
IMP-00015: following statement failed because
. importing SCOTT's objects into SCOTT
IMP-00015: following statement failed because the object already exists:
"CREATE SEQUENCE "EVT_PROFILE_SEQ" MINVALUE 1 MAXVALUE 999999999999999999999"
"999999 INCREMENT BY 1 START WITH 21 CACHE 20 NOORDER NOCYCLE"
ETC............
importing L1's objects into L1
IMP-00017: following statement failed with ORACLE error 1435:
"ALTER SCHEMA = "L1""
IMP-00003: ORACLE error 1435 encountered
ORA-01435: user does not exist
REM *************** IMPORTING TABLES *******************
REM ****************************************************
. importing SYSTEM's objects into SYSTEM
. . importing table "AN1999_BDAT" 243 rows imported
. . importing table "BOPD" 112 rows imported
. . importing table "BOINFO_AP" 49
ETC................
. . importing table "BO_WHF" 2 rows imported
IMP-00015: following statement failed because the object already exists:
"CREATE TABLE "DEF$_CALL" ("DEFERRED_TRAN_DB" VARCHAR2(128),
IMP-00015: following statement failed because the object already exists:
"CREATE SYNONYM "DBA_ROLES" FOR "SYS"."DBA_ROLES""
IMP-00015: following statement failed because the object already exists:
"CREATE SYNONYM "DBA_ERRORS" FOR "SYS"."DBA_ERRORS""
IMP-00008: unrecognized statement in the export file:
. importing L1's objects into L1
IMP-00017: following statement failed with ORACLE error 1435:
"ALTER SCHEMA = "L1""
IMP-00008: unrecognized statement in the export file:
J
Import terminated successfully with warnings.
-------------------------------------b]
So after analysing this log file, i created
the appropriate drives and folders... as the
import statement doesn't see them.
E:\ORADATA G:\ORDATA etc...
And i started to [b]IMPORT ONE MORE TIME. with:
$ IMP73 sys/pssw Full=Y FILE=c:\temp\FOLD_1\data_1.dmp BUFFER=64000
COMMIT=Y INDEXFILE=c:\temp\FOLD_1\BOO_idx.sql
LOG=c:\temp\FOLD_1\BOO_log.LOG DESTROY=Y IGNORE=Y;
after that i could not see the users nor the
tables created.
and the following message appeared in the log file:
Warning: the objects were exported by L1, not by you
. . skipping table "AN1999_BDAT"
. . skipping table "ANPK"
. . skipping table "BOAP"
. . skipping table "BOO_D"
ETC.....skipping all the tables
. . skipping table "THIN_PER0"
. . skipping table "UPDATE_TEMP"
Import terminated successfully without warnings.
and only 2 new tablespaces (originally 3) were
created without any data in ( i check that in
the Oracle Storage manager : the tablespaces exit
with 0.002 used space; originally 60 M for each !!)
so,
How to import data (with full import option) succefully
MORE THAN ONE TIME from an exported dump file ?
Even if we have to overwrite tablespaces , tables and users.
thank you very much

The Member Feedback forum is for suggestions and feedback for OTN Developer Services. This forum is not monitored by Oracle support or product teams and so Oracle product and technology related questions will not be answered. We recommend that you post this thread to the appropriate Database forum.
The main URL is:
http://forums.oracle.com/forums/index.jsp?cat=18

How to display data elements in the tempalte header

Hello friends
i've this date_from and date_to parameters which are date parameters that user enters..
based on these date parameters I want to display them in the header as
day of date_from(for example if the date_from is 13-nov-2010.then I should display 13)and for date_to it should dispaly as 15 if for example the user enters
16-nov-2010.(date-1's day)
so it should break down to
date_from-13-nov-2010, 13
date_to- 16-nov-2010, 15
I want these two values to be displayed in the header of the template how to do this
pls help
also let me know how to display data elements in the template header
Edited by: erp on Dec 22, 2010 12:44 AM

Hi Ananth..Thanks for ur timely reply
Can I use it with <? substring(':date_from',1,2)?>
where date_from is an input parameter which user enters at the run time of the report.
I've to capture the date entered by the user and print it in the header..
Pls reply

How to display data in detail block from a table.

Similar Messages

Maybe you are looking for