Header Details of pending * open Sales Order.

HY All Experts.
PL Read Follwing Code. i wnt to Header data of pending and open SO.
i used vbuk-lfstk. for So status. it is right.
FORM data_retrieval.
SELECT VBELN NETWR KUNNR FROM VBAK INTO (ITAB-VBELN,ITAB-NETWR,ITAB-KUNNR) WHERE VBELN IN VBELN.
SELECT NAME1 FROM KNA1 INTO (ITAB-NAME1) WHERE KUNNR = ITAB-KUNNR .
SELECT BSTKD BSTDK FROM VBKD INTO (ITAB-BSTKD,ITAB-BSTDK) WHERE VBELN = ITAB-VBELN.
SELECT VSNMR_V FROM VBAK INTO (ITAB-VSNMR_V) WHERE VBELN = ITAB-VBELN.
*SELECT EDATU FROM VBEP INTO (ITAB-EDATU) WHERE VBELN = ITAB-VBELN.
SELECT LFSTK FROM VBUK INTO (ITAB-LFSTK) WHERE VBELN = ITAB-VBELN and lfstk not like 'C'.
APPEND ITAB.
ENDSELECT.
ENDSELECT.
ENDSELECT.
ENDSELECT.
ENDSELECT.

Hello anjana,
   Actually your question is some confusing, but if u want to get eldest change as active sales order then logic is as follows:
1. On base of OBJNR u have to get UDATE from JCDS table
2. then write logic as:
SORT i_jcds BY objnr stat chgnr DESCENDING.
      LOOP AT i_jcds INTO wa_jcds1.
        CLEAR lv_stat.
        lv_stat = wa_jcds1-stat.
        AT NEW objnr.
          AT NEW stat.
            CLEAR: wa_tab.
            wa_tab-objnr = wa_jcds1-objnr.
            wa_tab-stat = lv_stat.
          ENDAT.
        ENDAT.
        IF wa_jcds1-inact = 'X'.
          CLEAR lv_tabix.
          IF sy-tabix > 1.
            lv_tabix = sy-tabix - 1.
          ELSE.
            lv_tabix = 1.
          ENDIF.
          READ TABLE i_jcds INTO wa_jcds2 INDEX lv_tabix.
          IF sy-subrc = 0.
            wa_tab-chgnr = wa_jcds2-chgnr.
            wa_tab-udate = wa_jcds2-udate.
            wa_tab-utime = wa_jcds2-utime.
            APPEND wa_tab TO i_tab.
          ENDIF.
          CONTINUE.
        ELSE.
          wa_tab-chgnr = wa_jcds1-chgnr.
          wa_tab-udate = wa_jcds1-udate.
          wa_tab-utime = wa_jcds1-utime.
        ENDIF.
        AT END OF objnr .
          AT END OF stat.
            APPEND wa_tab TO i_tab.
          ENDAT.
        ENDAT.
      ENDLOOP.
      DELETE ADJACENT DUPLICATES FROM i_tab COMPARING objnr stat.
      SORT i_tab BY objnr stat udate utime.
      DELETE ADJACENT DUPLICATES FROM i_tab COMPARING objnr.
3. now in i_tab table u'll get eldest UDATE
Hope its work for u.
Thanks & Regards,
Sumit Joshi

Similar Messages

Billing plan (Downpayment) for saved and open sales orders at header level?

Hi gurus,
I have configured billing plan in my SD environment at Item Level.
I want to change it to header level.
Questions:
1- When I make the changes to update the system to have billing plan at header level for future sales orders, is that possible for me to change all my saved orders and open orders with the new settings so that I can also have those saved and open orders with a billing plan at item level?
2- If that scenario is not possible, could we for example copy the data of a previously saved or open sales order into a new sales order with the new customizing (Billing plan at Header level?)
Thanks for your input
Kind regards
Chris

Hi
I am afraid you cannot do that converstion for the existing orders. BP at header level are enabled at teh document type level, while BP at item level is done at item category. So both are independent. Mostly it is advisabel to use BP at item level only.
If you are already using item level BP, and want to mvoe to header BP, then only future transactions can be executed with BP at header level. Existing item level BPlans will remain so in the system.

Table required for details of Open sales order

Hi experts,
My user wants following reports and it is to be based on SD module:
Customer Name Open Sales order(qty.) Delivered ( qty.) Balance Open Sales Order(Qty.)
Please advise from which table i can make said report.
Regards,
Samaar

Hi,
Check the table VBAP by filtering conditions.
Thanks
Prasada

Report for open sales order

Dear all,
I need to create a open sales order report. Could you please tell me from which table i can get open sales order. Its standard report is VA05 and also I checked in table VBBE. but all record which i get from VA05 are not visible in VBBE table. It means VBBE doesnt carry all pending open records.
Please guide me from which table i can get it or what is the sriteria to get it?
Thankyou very much in advance
Punnet Sharma

hi,
my logic goes like this:
Note: Open cursor is used since we are dealing with huge amnt of data:
* Select orders based on their Delivery status
SELECT vbeln
FROM vbuk INTO TABLE git_vbuk
      WHERE lfstk = 'A' OR lfstk = 'B' .
* Filter selected orders
* Selection using open cursor
DATA: lwa_op_sal_ord1 TYPE gt_comtab.
IF sy-subrc = 0.
    OPEN CURSOR c1 FOR
      SELECT vbap~matnr
      FROM vbap INNER JOIN vbak
      ON vbap~vbeln EQ vbak~vbeln
      FOR ALL entries IN git_vbuk
      WHERE vbap~vbeln = git_vbuk-vbeln AND
            vbak~vbtyp = 'C'.
    DO.
      CLEAR lwa_op_sal_ord1.
      FETCH NEXT CURSOR c1 INTO CORRESPONDING FIELDS OF lwa_op_sal_ord1.
      IF sy-subrc = 0.
        APPEND lwa_op_sal_ord1 TO li_op_sal_ord1.
      ELSE.
        CLOSE CURSOR c1.
        EXIT.
      ENDIF.
    ENDDO.
ENDIF.
here filter orders based on 'A' and 'B' from VBUK...
then frm header table VBAK get order for vbtyp ='C'.
now li_op_sal_ord1 will have open sales orders..
Moreover as per ur query y do u need the item data frm VBAP as u are only concerned abt VBELN.
If u need item u hv 2 run another select.
regards,
ags

Open sales orders using SD_SELECT_SALES_DOCUMENTS - no POSNR

Hi all,
I'm trying to use SD_SELECT_SALES_DOCUMENTS to select open sales documents but have noticed that it does not seem to contain line item details, seems like it only shows open sales orders at header level. I was wondering if there was something similar for line item details?
Regards,
Mark.

Marcin, thanks for the suggestion - unfortunately in import parameters didn't give me the function I needed.
Instead i've found BAPI_SALESORDER_GETSTATUS to be quite suitable.
Regards,
Mark

Closing of open sales order( Reward)

example- i have open sales order of 100 qty and 50 qty have been delivered and 50 qty is left .is there any option to close that sales order without delivery so that nobody can see it again?plz suggest me?best answer ll be rewared.

Hi tripathy
in this case you have to define reason fo rejection path : spro -sd- sales -sales documents header -sales document item define reason for rejection.
you should be more specific about rejection reason.
after delivering 50 quantity for remaining 50 quantity organisation has rejected or customer has rejected.
now goto VA02 give all the details and material give remaining 50 quantity select reason for rejection.
i hope you have understood.
if your doubts is clear don't forget to reward.
thanks
surya
Edited by: ramakrishna suryanarayanarao on May 27, 2008 7:07 AM

Reg Open sales order item and the quantity

Hi experts:
I am getting open sales order item based on inner join of tables(vbak, vbap, vbep). Not using vbbe table in inner join as it doesnt carry all pending open records.
can any one say how open sales order items and their quantity can be retrieved?
I searched forum and saw usage of vbuk and vbup tables, but it does not accomplish our scenario.
Thanks in advance,
Sashti.

Hi,
1) fetch the header information from VBAK table.
2) Based on VBAK table fetch all the line items from VBAP table.
3) Now fetch from VBFA table.
*-Fetch from VBFA to get the delivered qty
SELECT vbelv               " Preceding sales and distribution document
         posnv               " Preceding item of an SD document
         rfmng               " Referenced quantity in base UOM
    FROM vbfa
    INTO TABLE lt_vbfa
     WHERE vbelv   = gv_vbeln
       and vbtyp_n = 'J'.
4) By comparing VBFA-POSNR just filter the records from the VBAP internal table. Remained lines are open lines of the sales order.
Regards,
~Satya

Tables related for open sales orders

Hi all,
I need to fetch the list of open sales orders
based on the range of customers. I have seen va05
but in that only single customer
is allowed. I want for range of customers based on that list of open
sales orders.
can any tell me for this requirement is any std tcode available if not
what tables I have to use to fetch data.
any suggestion will be rewarded.

Hi ,
can you check these tables in sales
Name Description Uses
LIKP Shipped Lines header
LIPS Shipped Lines detail
VBAK Order header Every order (unless archiving)
VBAP Table fields Every line item (unless archiving)
<b>VBBE</b> Open sales order line items Great file, but be careful. Contents don't reflect orders that do not affect purchasing (go figure).
VBEP Schedule line item
VBFA Document flow Let's you move from order to shipping document to invoice.
VBUK Order status
VBUP Line item detail status
VBFK Invoicing header
VBFP Invoicing detail
<b>Reward pts if found usefull :)</b>
regards
Sathish

Mass Update of Product hierarchy in all CRM Open Sales Orders

Hi Folks,
I have a requirement in my project wherein I have to update product hierarchy details with new values in all Items of CRM Open sales orders.
If suppose I have a text file which has the details of Open Orders & new product hierarchy which i have to update, then would it be recommended if I use BDC for this task. Can I Call Transaction CRMD_ORDER?
If someone has already gone through such requirement, Can you please suggest me how to proceed with this requirement. Using BDC or any other way which I can proceed with?
Thanks in advance !!!
Regards,
Nitish.

You are correct in indicating that Exchange rate type field is not seen in Header data of sales order. I checked screen layouts for various screens for sales order data and this field is not suppressed. The only reason could be that this field is not used in sales order screens
If you are interested, you could also check in the following way
1. Go to SE11, enter database table as VBAK
2. Once inside data dictionary table, click where used list button, select programs and screens and execute
3. click continue (don't select background)
4. now you would have list of programs and screens, this table is used
5. now start another session and go to transaction SE51
6. indicate program name as SAPMV45A and screen numbers as listed in step 4. you can check all screen numbers to see whether Exchange rate type field is listed in sales order layout.
7. Of particular interest would be screen number 4311 as this contains Financial accounting data & 4303 Billing data
8. you can check screen layout for screen 4311 & 4303. you would see Exchange rate type field is not indicated.
9. in case you could find this field in any screen, you could ask your ABAP consultant to add this field in the layout screen.
Hope this answers your question

Reg : open sale order

hai to all
i my senario i should download the open sale order existing in the present production server into a flat fle
can anyone tell me where this ship- to party is getting stored while creating the sale order. please let me know the table name.
regards
vijay

Hi Vijay,
To find out Open Sales Order. You shoud get them from VBUK-GBSTK <> 'C'. Store them in internal table.
To get Ship-to-party, you can get it from VBPA (partner table).
VBPA-VBELN = sales order number
VBPA-POSNR = '000000'
VBPA-PARVW = 'WE' or 'SH'
You will get details for Ship to Party.
regards,
ram

Open Sales orders through IDOC

Hi
We are trying to send the list of open sales orders of a customer in an IDOC to the customer. For example, if the customer has got 15 sales order to be delivered to him , he needs the details of all these 15 orders in an single IDOC
Is there any IDOC message type available for this in SAP R/3 4.7 version or is there a standard solution of sending these details through IDOC
Regards
Anandh

Hi
We are trying to send the list of open sales orders of a customer in an IDOC to the customer. For example, if the customer has got 15 sales order to be delivered to him , he needs the details of all these 15 orders in an single IDOC
Is there any IDOC message type available for this in SAP R/3 4.7 version or is there a standard solution of sending these details through IDOC
Regards
Anandh

Close of Open Sales Orders

Dear Experts,
I have a similar requirement i.e. A good Volume of Open Sales Orders which are to be Closed. The Status of these Sales Orders being Partially Delivered, Not Delivered and Being Processed. Can I have a best solution to close them via an SAP transaction or with an ABAP Program. Kindly give us a detailed Solution to proceed.
Regards
Hari

Hi,
As i understood, you want the STATUS of the orders to be COMPLETE.
For this you have to do some settings in the ITEM CATEGORY in VOV7
Goto the Transaction code VOV7 and select the ITEM CATEGORIES for all those documents and maintain the *COMPLETION RULE as A.*
Now check creating the new documents after executng the full cycle.
thanks,
santosh

Deletion of open sales orders

Dear all,
we want to delete open sales orders .I searched forum unable to do .Please guide me.
Regards,
Suresh

hi
You can delete the sales order using transaction VA02, but there should not be any subsequent document is created against it. Please let me know the error message you are still getting unable to delete so.
Deletion /cancellation can only happen even if the subsequent documents are NOT created. After cancelling the invoice and deleting the delivery document, we can set the reason for rejection at the Sales Order Header Level.
Steps:
1. Cancel the invoice through T code VF11
2. Reverse the Goods Issue using VL09, turn the pick quantity u2018zerou2019 in the delivery document
3. Delete the delivery document using VL02n.
4. Finally set the reason for rejection at the Sales Order Header Level. (So Bala, just check the SO you want to delete ever had any subsequent document? )
Note: An Invoice cannot be deleted but canceled. It can only be canceled with (VF11) only if the relevant accounting document is not generated. Generation of accounting document means the value is posted into accounts and G/L accounts are hit.
SAP FI department needs to reverse the accounting doc on a real-time scenario. Only after the accounting doc is reversed invoice can be canceled. Tax documents generated through the Invoice (Tax is maintained on a separate account) also need to be reversed but this is a part of FI so an SD consultant just needs to request the FICO guy to do the reversal
transaction MASS or VA05 you should be able to set the reason for rejection

LSMW - Open Sales Orders

Hello Friends
I want to find if anybody can guide me on how to get all open sales order tables , i want to create a format and create a flat file for uplodading the file , for this what do i need and how do i do it.
Also for creating LSWM can i use the existing one which i can just Assign the New file to the existing one .
Regards.

Dear Mehmood,
I want to find if anybody can guide me on how to get all open sales order tables
You want to extract all the open sales orders- which you can get from Table:VBUP key in overall document status in selection screen ( You can use VBUK also- but if there are certain sales orders in which some of the items are completed or few of them open, using VBUK - you will not get exact records)
Secondly, you can get the data by using Query also- in SQVI
design a query with VBAK / VBAP & VBUP
so that from VBAK you can give time period & sales area details
from VBAP - you can enter plant relevant details to filter certain records & item category as well
where as VBUP- filter wth the status.
once downloaded store in flat file.
Now Create LSMW object by using batch input recording method. after mapping the relevant fields,
prepare the flat file in such a - it suits to the upload file / recording file. then you can upload the already downloaded n stored open sales orders in flat file.
Hope this is what you are looking for.
Regards,
ReazuddinMD

Reg:open sales orders

Can any body give me the logic to list the oper sales orders.
Thanks,
srik

Hi,
*& Report ZOPEN_SALESORDER
report zopen_salesorder message-id arc no standard page heading.
tables :kna1,vbak.
select-options : so_vkorg for vbak-vkorg ,
so_vtweg for vbak-vtweg ,
so_spart for vbak-spart,
so_kunnr for kna1-kunnr.
data : keybalance like bapi3007_3 occurs 0 with header line.
data : begin of sales_open occurs 0 ,
vbeln like vbak-vbeln,
auart like vbak-auart,
kunnr like kna1-kunnr,
bstnk like vbak-bstnk,
lfstk like vbuk-lfstk,
fkstk like vbuk-fkstk,
gbstk like vbuk-gbstk,
end of sales_open.
data : begin of itm_sales occurs 0,
vbeln like vbap-vbeln,
posnr like vbap-posnr,
matnr like vbap-matnr,
lfsta like vbup-lfsta,
lfgsa like vbup-lfgsa,
fksta like vbup-fksta,
fksaa like vbup-fksaa,
gbsta like vbup-gbsta,
end of itm_sales.
data : l_kunnr like kna1-kunnr,
l_vkorg like vbak-vkorg,
l_vtweg like vbak-vtweg,
l_spart like vbak-spart.
data: v_statusl(20) type c,
v_statusb(20) type c,
v_statusf(20) type c,
v_statusg(20) type c,
v_status(20) type c,
v_field(1) type c.
**Selection Screen Validations.
at selection-screen.
perform validations.
*& Form Validations
text
--> p1 text
<-- p2 text
form validations.
**Customer
if not so_kunnr[] is initial.
select single kunnr into l_kunnr
from kna1
where kunnr in so_kunnr.
if sy-subrc ne 0.
message e002 with text-005.
endif.
endif.
**Sales Organization
if not so_vkorg[] is initial.
select single vkorg into l_vkorg
from tvko
where vkorg in so_vkorg.
if sy-subrc ne 0.
message e003 with text-006.
endif.
endif.
**Distribution Channel
if not so_vtweg[] is initial.
select single vtweg into l_vtweg
from tvkov
where vkorg in so_vkorg
and vtweg in so_vtweg.
if sy-subrc ne 0.
message e004 with text-007.
endif.
endif.
**Division
if not so_spart[] is initial.
select single spart into l_spart
from tvta
where vkorg in so_vkorg
and vtweg in so_vtweg
and spart in so_spart.
if sy-subrc ne 0.
message e005 with text-008.
endif.
endif.
endform. " Validations
top-of-page.
perform sales_top_of_page.
start-of-selection.
perform sales_sel.
*& Form sales_sel
text
--> p1 text
<-- p2 text
form sales_sel.
data: date type sy-datum.
date = sy-datum - 3000.
select vbeln auart kunnr bstnk
lfstk fkstk gbstk
into table sales_open
from vbakuk
where vkorg in so_vkorg
and vtweg in so_vtweg
and spart in so_spart
and kunnr in so_kunnr
"and gbstk ne 'C'.
and gbstk in ('A','B')
and erdat >= date.
loop at sales_open.
call function 'BAPI_AR_ACC_GETKEYDATEBALANCE'
      exporting
        companycode = '1919'
        customer    = sales_open-kunnr
        keydate     = sy-datum
      tables
        keybalance = keybalance.
    read table keybalance index sy-tabix.
write:/4 sy-vline,
5 sales_open-vbeln color 2 intensified on,
16 sy-vline,
17 sales_open-auart color 2 intensified on,
27 sy-vline,
28 sales_open-kunnr color 2 intensified on,
40 sy-vline,
41 sales_open-bstnk color 2 intensified on,
55 sy-vline,
56 sales_open-lfstk,
76 sy-vline,
77 sales_open-fkstk,
96 sy-vline,
97 sales_open-gbstk ,
117 sy-vline,
118 keybalance-lc_bal,
142 sy-vline.
"hide sales_open-vbeln .
endloop.
write :/4 sy-uline(160).
endform. " sales_sel
*& Form sales_top_of_page
text
--> p1 text
<-- p2 text
form sales_top_of_page.
write:/4 sy-uline(160),
50 'OPEN SALES ORDERS' color 7 intensified on .
write: /4 sy-vline,
5 'SalesOrder' color 1 ,
16 sy-vline,
17 'OrderType' color 1,
27 sy-vline,
28 'Customer' color 1,
40 sy-vline,
41 'PoNumber' color 1,
55 sy-vline,
56 'Delivery Status' color 1,
76 sy-vline,
77 'Billing Status' color 1,
96 sy-vline,
97 'Processing Status' color 1,
117 sy-vline,
130 'Balance' color 1,
142 sy-vline.
write:/4 sy-uline(160).
endform. " sales_top_of_page
"at line-selection.
"select a~vbeln
"a~posnr
"a~matnr
"* a~kwmeng
"b~lfsta
"b~lfgsa
"b~fksta
"b~fksaa
"b~gbsta
"into table itm_sales
"from vbap as a join vbup as b
"on avbeln eq bvbeln
"and aposnr eq bposnr
"and b~gbsta ne 'C'
"where a~vbeln eq sales_open-vbeln.
"if not sales_open is initial.
"loop at itm_sales.
"write:/5 itm_sales-vbeln,
"itm_sales-posnr,
"itm_sales-matnr,
"itm_sales-lfsta,
"itm_sales-lfgsa,
"itm_sales-fksta,
"itm_sales-fksaa,
"itm_sales-gbsta.
"endloop.
"endif.
thanks
Ravi

Header Details of pending * open Sales Order.

Similar Messages

Maybe you are looking for