Table required for details of Open sales order

Hi experts,
My user wants following reports and it is to be based on SD module:
Customer Name Open Sales order(qty.) Delivered ( qty.) Balance Open Sales Order(Qty.)
Please advise from which table i can make said report.
Regards,
Samaar

Hi,
Check the table VBAP by filtering conditions.
Thanks
Prasada

Similar Messages

Billing plan (Downpayment) for saved and open sales orders at header level?

Hi gurus,
I have configured billing plan in my SD environment at Item Level.
I want to change it to header level.
Questions:
1- When I make the changes to update the system to have billing plan at header level for future sales orders, is that possible for me to change all my saved orders and open orders with the new settings so that I can also have those saved and open orders with a billing plan at item level?
2- If that scenario is not possible, could we for example copy the data of a previously saved or open sales order into a new sales order with the new customizing (Billing plan at Header level?)
Thanks for your input
Kind regards
Chris

Hi
I am afraid you cannot do that converstion for the existing orders. BP at header level are enabled at teh document type level, while BP at item level is done at item category. So both are independent. Mostly it is advisabel to use BP at item level only.
If you are already using item level BP, and want to mvoe to header BP, then only future transactions can be executed with BP at header level. Existing item level BPlans will remain so in the system.

What are theSNP Settings required for Forecast Consumption with Sales Order

Hello APO Folks,
I have one SNP scenario: (We don't have GATP)
Forecast for Finsihed Product - "PNG_Fert" in Location "1000".
I have forecast quantity of 500, now our requirement is - when SNP heuristic run will take place (without any sales order quantity) then there should not be any planned orders creation.
Planned order creation should happen Only if any one places sales order from ECC , which comes to APO then against that sales order forecast quantity should consume and should create the planned orders equal to the nos. of sales order quantity.
So if I have forecast of 500 qtys and sales order of 90 qtys then heuristic run should yield/create the planned order of 90 qtys and there should be 500-90 = 410 forecast quantities remaning.
Please let me know which strategy will be used and other setting in ECC and APO for SNP. I
The setting with strategy 50 in ECC and 30 in APO worked properly with PPDS - RRP3 view but from interactive planning /sapapo/sdp94 it is not working, so there will be different setting for SNP.
Thanks in Advance,
Regards,
Vishal
Edited by: Vishal24a on Oct 13, 2011 9:15 AM

Vishal
Can you please explain what issue you are facing when you load the product in planning book. First thing is do you see 410 against forecast and 90 against sales order key figure ? If yes then it means the forecast is getting consumed properly by SO.
As far as your other requirement goes (planned order should only be created for sale order quantity) you have to change your total demand macro calclation logic. Your total demand key figure should show 90 instead of 500 - so just include sales order in your total demand calculation (stock balance macro) and run heuristic. Your requirement will be satisfied
Thanks
Aparna

Credit block should not require for Credit card paid sales order

Dear friends,
my client want that sales oder with credit card payment should not block sales order for credit management reasons. Hoe can it be configured.
Regards
rdc

Are you using credit card processing in SAP to get the authorization?
If you are then the authorization should not block the order.
Or are you using credit card as a form of payment (without authorization) in which case this needs to be put on the customers account as a payment and then the order entered.
Where are you holding the credit card details?

Table name for backorder qty on sales order.

Hi,
I'm new to SAP NetWeaver; would like to know what is the table name
that retain the backorder qty for a sales order.
Thanks in advance,
Nghiem.

There may not even be a table for that value, it's good possible that's it's calculated during transaction runtime.
To find out which tables are read try the following:
- start transaction ST05
- start a second mode
- start VA03 in the second mode
- enter your order number, do not press enter yet
- switch back to transaction ST05 and enable trace for your user
- switch to VA03 and press enter
- switch to ST05 and turn trace off
- display trace
Markus

Table name for tracking delivery and sales order

Hi,
What is the table and field name for tracking the delivery and sales order in SD
Regards

Hi,
If you want the DELIVERY DOCUMENT individally you can get it from the LIKP-VBELN
In the same way the SALES DOCUMENT from VBAK--VBELN
If want to get the DELIVERY DOCUMENT AND SALES DOCMENT from the VBFA with the Sbsequent document category
M is the subsequent category for BILLING
j DELIVERY
regards,
santosh

Settings required for Forecast Consumption with Sales Order

Hello Folks,
I have one scenario:
Forecast for Finsihed Product - "PNG_Fert" in Location "1000".
I have forecast quantity of 500, now our requirement is - when SNP heuristic run will take place (without any sales order quantity) then there should not be any planned orders creation.
Planned order creation should happen Only if any one places sales order from ECC , which comes to APO then against that sales order forecast quantity should consume and should create the planned orders equal to the nos. of sales order quantity.
So if I have forecast of 500 qtys and sales order of 90 qtys then heuristic run should yield/create the planned order of 90 qtys and there should be 500-90 = 410 forecast quantities remaning.
Please let me know which strategy will be used and other setting in ECC and APO.
Thanks in Advance,
Regards,
Vishal

Hi,
Please use planning strategy "PLANNING WITHOUT FINAL ASSEMBLY". Strategy 50 in ECC and 30 in APO. In this you can have forecasts and you can do the planning for the forecasts. But the planned orders created cannot be converted to production order. When the sales order comes in the forecast will be consumed and only for the sales order quantity a new convertible planned order will be created.
Also the forecast and sales orders will be handled in different segments. This will help you to clearly track the changes.
If you don't want to handle the sales orders in MTO segment, then the same can be achieved by using strategy 52.
For more information please check the below link,
http://help.sap.com/saphelp_erp60_sp/helpdata/en/cb/7f9b7043b711d189410000e829fbbd/frameset.htm
Regards,
Manimaran M.

How to find the Open sale orders till date for given plant and material ?

Hi experts,
                 I have a requirement to calculate the open sale orders for a given plant and material. I have tried in VA05 wherein i can get only for the material and sales area combination. From the document nos obtained from VA05 i can then find the plant. But my question is how do i get the output of VA05 into my progra. (can i use submit for a module pool report ).
Also if ther is some other standard table or Function module to find the open sale orders till a given date ,it will be even more helpful....in which case i can drop the VA05 route.
Kindly help
Thanks in advance
Ashwin

Hi Ashwin,
    You can use SAP Tables VBAK and VBUP to get to know if the document is complete or not.
   VBUK-GBSTK is the field that will give you the status of the Sales Order .
VBUK is used at header level , whereas VBUP is used for Item level.
So in your case what I would do is :
Get the Sales Orders that satisy the plant and material criteria from VBAP table , take this Sales Document numbers and go to VBUK or VBUP table to get the Sales Order Status.
   If I need to find the open quantity as well I will link to VBFA table based on the document number.
Reward if helpful.
Thanks,
Imran

How to summarize Open sales order credit value

Hi, friends.
I am designing Add-on report about credit exposure.
I found the relevant tables of Credit Limit in FD32
KNKK
S066
S067
Then, I would like to show the document details of open sales order credit value in the report.
I tried to summarize the open sales order amount from VBAK, VAUK, VBAP, VBUP.
However, it doest match to the amount in S066 table.
Can anyone tell us how to summarize Open sales order credit value from SD documents?
Regards,
Yu

Sudheer,
You need to check the update rule given in the definition of the Credit control Area which you are using for credit management. If you want only the open deliveries then you need to have update rule 15 in the credit control area.
In the credit controal settings, you need to have settings for the credit check at the delivery level.
Hope this will solve your issue.
Regards,
Chetan
Edited by: Chetan Gupte on Jul 15, 2010 8:56 PM

Getting the open sales orders and open deliveries valies

Hi SDNs,
I have a requirement that i need to get the all sales orders open values and delivery values. I need to build a logic for this scenario. could you please provide the logic for getting the open sales order values for respective customer.
Please provide logic instead of standard reports. That would be very useful
Thanks in advance
Regards,
K

Please provide logic instead of standard reports.
Really surprising !!!!!!!!!
But still I would like you to have a look at VA05 where both open quantity and open order value will flow. If you still feel to get the related tables, you can consider VBBE where you can get open order quantity
thanks
G. Lakshmipathi

Finding open sales order line items

Hello,
First time poster and new to SAP so here goes:
I am trying to find a better method for finding our open sales order line items.
So far I am joining VBAK-VBUP-VBAP in that order and my scan logic is for sales document type (vbak-auart) of ZOR and ZDEW with an overall status (vbup-gbsta) of A or B.
This logic use to work but now all it does is timeout after 60 minutes.
VBAK has 6,766,828 total records in it
VBUP has 16,431,117 total records in it
VBAP has 12.9 million total records
Thanks,
Randy

Hi Randy,
For your requirement VBAK&VBUPtables are enough.
Firstly you can read the table VBAK where AUART = 'ZOR' or 'ZDEW'.
After this you will get all the sales orders with the order types ZOR or ZDEW.
For these sales orders you can read VBUP tables.
In this table there is a field delivery status.
If this filed value is C then that line item delivery is completed.
if it is not equal to C then those line items are open sales order line
items.
Thanks,
shyla

Open sale order

In a report i am in need of obtaining open sale order for a material. open sale order means sale orders for which the PGI is not yet done.
can anybody tell me how to achieve this..

Dear,
Go to VA05 and enter the date range/material or customer code as required.
Check the option "open sales order"
Enter the sales organisation and hit enter.
Now system will display the open SO's.
Regards,
Joseph Charles Vaikathussery

Open sale orders

In a report i am in need of obtaining open sale order for a material. open sale order means sale orders for which the PGI is not yet done.
Please tell me the data fetching from various tables.
can anybody tell me how to achieve this..

HI
Give logic to ur ABAPER in FS If in VA02 Item is given as if Balance Qty is Greater than 0 then it is OPEN and if not it is Closed.
Regards
Santosh.A.R

Exclusion of open sales order in credit management

Hi friends,
My requirement is that, all open sales orders should not be considered into credit management.
Is this possible in simple credit check or Automatic creidt check? Tell me the settings.
Regards
Rama

Dear Rama,
You can definitely Exclude Open Orders in Automatic Credti Management.
Use T-Code - OVA8
Select the required combination of Credit Control Area, Risk Cat. & Credit Group & double click.
Under Checks Tab There is Check Box for Open Orders.
In your case as you want to exclude Open Orders, just uncheck the box.
Hope this helps...
Give points if useful...
Thanks,
Jignesh Mehta

SQL Open Sales Orders Value using today's currency rates

Hi experts,
I am creating a report for displaying the open sales order values (and other fields) using current currency rate (where applicable). I developed the below query. The only problem with this query is that it ignores the order rows in which the currency field is blank (Don't understand why this happens in SAP). Do you have other ideas?
Thanks & Regards,
IC
SELECT
T0.DocNum as 'Sales Ord No', T0.DocDate as "Ord Date", T0.CardCode as "Cust Code", T0.CardName as "Customer Name", T1.ItemCode,
T1.Dscription, T3.ItmsGrpNam, T1.U_SU, T1.U_SULEN, T1.U_SUQTY, T2.InvntryUom as 'Stock UOM', T1.Quantity as 'Ord Qty', T1.Quantity*T2.U_ITWTSTU as 'Weight (KG)', T1.Quantity-T1.OpenQty as "Qty Delivered", T1.OpenQty as 'Bal Qty', T1.Price*T1.Quantity/T4.Rate AS "Ord Value (GBP)", T1.Price*T1.OpenQty/T4.Rate AS "Open Qty Val (GBP)", T1.Price/T4.Rate AS "Price (GBP)", T1.Price*T1.OpenQty as "Ord Value (BP Currency)", T1.Price as 'Price (BP Curr)', T1.Currency as 'Cur Ind', T4.[Rate] AS 'Curr Rate', T0.DocDueDate as "Due Date", T1.WhsCode as 'Del WHG'
FROM ORDR T0 INNER JOIN RDR1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OITM T2 ON T1.ItemCode = T2.ItemCode INNER JOIN OITB T3 ON T2.ItmsGrpCod = T3.ItmsGrpCod, ORTT T4 WHERE T0.DocCur <> 'GBP' AND T1.Currency=T4.Currency AND T4.[RateDate] = [%0] AND T1.OpenQty > 0
UNION ALL
SELECT
T0.DocNum as 'Sales Ord No', T0.DocDate as "Ord Date", T0.CardCode as "Cust Code", T0.CardName as "Customer Name", T1.ItemCode, T1.Dscription, T3.ItmsGrpNam, T1.U_SU, T1.U_SULEN, T1.U_SUQTY, T2.InvntryUom as 'Stock UOM', T1.Quantity as 'Ord Qty', T1.Quantity*T2.U_ITWTSTU as 'Weight (KG)', T1.Quantity-T1.OpenQty as "Qty Delivered", T1.OpenQty as 'Bal Qty', T1.LineTotal AS "Ord Value (GBP)", T1.LineTotal/T1.Quantity*T1.OpenQty AS "Open Qty Val (GBP)", T1.LineTotal/T1.Quantity AS "Price (GBP)", T1.Price*T1.OpenQty as "Ord Value (BP Currency)",T1.Price as 'Price (BP Curr)', T1.Currency as 'Cur Ind', T1.[Rate] AS 'Curr Rate', T0.DocDueDate as "Due Date", T1.WhsCode as 'Del WHG'
FROM ORDR T0 INNER JOIN RDR1 T1 ON T0.DocEntry = T1.DocEntry INNER JOIN OITM T2 ON T1.ItemCode = T2.ItemCode INNER JOIN OITB T3 ON T2.ItmsGrpCod = T3.ItmsGrpCod WHERE T0.DocCur = 'GBP' AND T1.OpenQty > 0 ORDER BY 2,1

Hi,
Try:
SELECT
T0.DocNum as 'Sales Ord No', T0.DocDate as "Ord Date", T0.CardCode as "Cust Code", T0.CardName as "Customer Name",
T1.ItemCode, T1.Dscription, T3.ItmsGrpNam, T1.U_SU, T1.U_SULEN, T1.U_SUQTY, T2.InvntryUom as 'Stock UOM',
T1.Quantity as 'Ord Qty', T1.Quantity*T2.U_ITWTSTU as 'Weight (KG)', T1.Quantity-T1.OpenQty as "Qty Delivered",
T1.OpenQty as 'Bal Qty', T1.Price*T1.Quantity/T4.Rate AS "Ord Value (GBP)",
T1.Price*T1.OpenQty/T4.Rate AS "Open Qty Val (GBP)", T1.Price/T4.Rate AS "Price (GBP)",
T1.Price*T1.OpenQty as "Ord Value (BP Currency)", T1.Price as 'Price (BP Curr)',
T1.Currency as 'Cur Ind', T4.[Rate] AS 'Curr Rate', T0.DocDueDate as "Due Date", T1.WhsCode as 'Del WHG'
FROM ORDR T0 INNER JOIN RDR1 T1 ON T0.DocEntry = T1.DocEntry
INNER JOIN OITM T2 ON T1.ItemCode = T2.ItemCode
INNER JOIN OITB T3 ON T2.ItmsGrpCod = T3.ItmsGrpCod
LEFT JOIN ORTT T4 ON T1.Currency=T4.Currency AND T4.[RateDate] = [%0] AND T4.Rate != 0
WHERE T0.DocCur != 'GBP' AND AND T1.OpenQty > 0
Thanks,
Gordon

Table required for details of Open sales order

Similar Messages

Maybe you are looking for