Heading Change for keyfigures in the layouts

Hi-
We have two keyfigures in Manual Layouts which has short description as heading. Now users want to see Long description as heading.
1. I went to change mode of Manual layout and copied the "Long description" to heading. Still when users are creating the contracts in CRM, they are not seeing my changes. Is there any thing else I have to do. I dont find any option to activate the layouts or planning area.
2. How to transport the layouts if the same technical name is used in different Planning levels? for Eg: lets say we have a layout called "XYZ" in two different Planning levels, should I transport the layout with the planning level? or I can jus transport the layout.

I figured it out...

Similar Messages

Changing restricted variables on the layout.......

Hi All,
I'm not sure if this is a bug or just the way BPS works, but here's the issue.
We've created user-defined variable for 'Version', and in the definition we made it restricted by the user at the time of executing the layout.
So when you first execute the layout, it does what it should and prompts you in a pop-up window to select a particular version from what the user is offered based on his user-defined values.
The problem is, when you exit the layout and come back in, or even when you're in the existing layout you don't have the chance to bring up that pop-up window again to change your selection.
If you click on the 'Other Combination' icon in the layout, the version appears, but it's protected and cannot be changed.
Instead, you have to always go to the 'Set Variable' tool to change the the version you want to view.
The 'Set variable' tool is not very user friendly, especially when you have a big list of variables to choose from, and it also forces the user to know various technical information to be able to select thr right variable for his needs.
How can we get the variable pop-up to come up to change the variable vaalue, without having to go to 'Set Variable'?
Thanks

Hi Ehab,
Unfortunately that is the way BPS works. It keeps the variable value in a buffer that basically consists of two tables upc_var_cha_sel and upc_var_cha_act. Check them out.
I created a solution that automatically clears these tables of the variable value and gives the user a fresh popup box whenever they access the planning folder.
The following is a thread I posted earlier with the sample code.
Re: Change variable value for a user
This code is part of an exit function in the planning scenario and can be executed by choosing the function attributes under Global Planning Functions in UPSPM and selecting either 'Function as Pushbuttton', 'Execute Function when Saving' or as I prefer, 'Execute Function when Starting field'.
This works like a charm. Contact me if you need more details.
Dennis (ATL)

How create a replice "Mass Change for Quotation" from the "Mass..for order"

Hello everybody,
How create a replica "Mass Change for Quotation" UI object from the standard "Mass change for Sales Ordesr" UI object...
Way: SAP CRM==>Select a business role "SPL-Service part Management" ==> Sales ==> "Mass Change Sales Orders"
It needs a replica with the title "Mass Change for Quotation" .
Could you pleas help?
Mit freundlichen Gruessen / Kind regards,
Pavel Biarozkin

Hi Howard Brown,
Thanks for your suggestions about Windows user experience. Actually, we are glad to hear more feedback
about Windows operating system so that we can improve Windows to make it be more easier to
use.
As a suggestion for your current situation, you can use Windows Charm Bar to search Apps, it is also easy to use.
Alex Zhao
TechNet Community Support

Why do arrow heads change ends when using the pen tool?

1. I create a horizontal line
2. I change it to a right ended arrow head selected from my own graphic styles
3. I then want to extend the left side ( non arrow end) with the pen tool
4. I click the non arrow end to extend the line in a vertical direction
5. The atrrow head changes to the other end
Why?

Illustrator's arrowheads don't know right from left, they only know start from finish. Each open path in Illustrator has a beginning and an end. When you use the pen to extend a path you make the end you work from the end, even if it was once the beginning. Deselect the path, then click on the other end with the pen tool to restore the path direction.
If all you are doing is making the path longer I'd would be better to just move the end point.

Excel Addin for MDS - break the layout of the sheet

Excel Addin for MDS 2012 / 2014
When I apply the filter from the server:
1) breaks the layout of formatting cells
2) if I added my own rows above the row with system attributes and I apply server filter, then my rows are deleted
These rows should not be deleted !!!
from Moscow with money

1)
after reload entity my format cells (font, formatting, alignment, back color, ...) disappear. Why?
In the end, when I select data from the external sources (MSSQL, Oracle, Analysis Services and other) -
formatting table cells preserved
2)
Yes, I see this message. But.... Why not reload entity without removing my own lines?
(see screenshot) Pink rows is very useful for users!
from Moscow with money

Not to display units for keyfigures in the query output

Hi All,
i have created a query and when i executed it displays all the key figure values with units.
is there any way to restrict with only value.
there are more than 20 to 25 keyfigures in query. i canot create formula keyfigure for these keyfigures and use NODIM().
is there any way to restrict the units
Thanks
WHP

Hi ,
i think u will be require to create the formula with NODIM. check the below link :
Material display key figure attributes units hide
Thanks,
Deepak

How to change the lengths of the layout

Hi ,
I am executing one report, output is coming fine but next if i go to print preview for PO number only 9 digits are appearing one digit is missing, actually column is trucated, there in print preview there is one tab called Change Layout, there if i see length of the PO no is 9, so its showing only 9 digits, actually length of the PO no should be 10.in change layout the length is editable i can change from 9 to 10, after that there is a button called copy, then it will show correctly, it works only one time, so each and every time user has to change the length, so can any one suggest how to change that length in the layout permanently, bcos there is no save button there.
Can any one tell me from where all these lengths are coming which are appearing in change layout.Surely its not coming from the report.

Hi friend,
That depends upon the space provided by the ALV column for that variable or the heading size its not based on the data element size.
If you want to be more clear lust count the space available for each field available at the print preview.
The details for that are stored in table T180S just see the documentation available for that table.
And see when the table is getting filled like that so that you will be able to find a solution where and how it is getting populated.
Use column width optimization for getting the correct output.
If you have any queries in this please revert back to me i will help you.
Thanks,
Sri Hari
Edited by: srihari.kumar on Jan 5, 2012 4:01 PM

Can we change the layout of the JAVATABLE to accomdate to the set Screen Resolution??

Using Oracle Express 6.3.4 we are creating dataview(OLAP)in Web.
We have set the background of the page calling a particular gif file.
Now that the tool bar and Javatable color(Grey is the default colour) is not matching with the background of the gif file.
I tried my best to change the color as a whole.But ended up in changing some portion of the layout like the pageedge,rowedge & columnedge colour in the JAVA TABLE.
Can some one throw light on this???Is it possible to change the background of the whole applet to our likes.
Thanks in Advance
Nanda Kishore Kompala

Nanda, you are right, there are certain areas of the table where you cannot change the color. There is currently no property for this.

Here is a solution for BEX analyzer NW04S layout - setFilterStyle

Hi all,
I had a problem with a workbook that contains multiple sheet with differebts queries.
The problem was, that the filter panel had the same style on each sheet. And like the number of charactéristics are different for each quey, the layout was not well.
To correct this :
- I have modify the 'setFilterStyle' macro   and now, the filter panel is displayed correctly on each sheet.
I hope this solution will be able to help you ...
Regards,
Martine
Here is the modified macro:
'--- Reformat the Filter Area with the correct stlyes
Sub setFilterStyle()
Dim i As Integer
Dim lRange As Range
Dim lsheet As Worksheet
On Error Resume Next
'i = 16
'Calculate Filter-Area
'While Sheet4.Cells(i, 3) <> ""
'   i = i + 1
'Wend
'Filter Area
For Each lsheet In ThisWorkbook.Worksheets
    i = 16
    While lsheet.Cells(i, 3) <> ""
        i = i + 1
    Wend
If lsheet.Range("C14").Value = "Filter" Then
    Set lRange = Range(lsheet.Cells(15, 3), lsheet.Cells(i - 1, 4))
    lRange.ClearFormats
    With lRange.Borders(xlEdgeBottom)
            .LineStyle = xlContinuous
            .Weight = xlThin
            .ColorIndex = 47
    End With
    With lRange.Borders(xlEdgeRight)
            .LineStyle = xlContinuous
            .Weight = xlThin
            .ColorIndex = 47
    End With
     With lRange.Borders(xlEdgeRight)
            .LineStyle = xlContinuous
            .Weight = xlThin
            .ColorIndex = 47
    End With
    With lRange.Borders(xlEdgeLeft)
            .LineStyle = xlContinuous
            .Weight = xlThin
            .ColorIndex = 47
    End With
     With lRange.Borders(xlEdgeTop)
            .LineStyle = xlContinuous
            .Weight = xlThin
            .ColorIndex = 47
    End With
    With lRange.Borders(xlInsideVertical)
            .LineStyle = xlContinuous
            .Weight = xlThin
            .ColorIndex = 47
    End With
    lRange.Interior.ColorIndex = 2
End If
Next lsheet
' No more filter Area
For Each lsheet In ThisWorkbook.Worksheets
    i = 16
    While lsheet.Cells(i, 3) <> ""
        i = i + 1
    Wend
If lsheet.Range("C14").Value = "Filter" Then
'Calculate Filter-Area
    l_old = i
    While lsheet.Cells(l_old, 3) = "" And l_old <= 200
        l_old = l_old + 1
     Wend
     Set lRange = Range(lsheet.Cells(i, 3), lsheet.Cells(l_old - 1, 4))
     lRange.ClearFormats
End If
Next lsheet
End Sub
'--- Service Function to get the Name Object back
Private Function getName(i_name As String) As Name
   Dim l_name As Name
     For Each l_name In ThisWorkbook.Names
        If l_name.Name = i_name Then
            Set getName = l_name
        End If
     Next l_name
End Function

Hello,
You can set the default workbook as the SAP standard provided.
To do this, please open the BExAnalyzer and goto the
"Global settings" screen (Its on the BExAnalysis Toolbox menubar).
In the "Select Default workbook" tab click on the "Use SAP Standard"
button.
This would set the default workbook. Close Analyzer and reopen it.
It should work fine.
Some additional information for you:
The default workbook that is used can be seen in table RSRWBTEMPLATE.
Check the workbook that is assigned to your user. If there is a blank
workbook assigned to your user, this uses the SAP Standard Global
Wokrbook. If your user iD doesn't exist in this table, then it will use
the workbook assigned to the <blank> user id. If the <blank> user id is
assigned to <blank> workbook, this means that any user id that doesn't
have an entry in this table will be use the global workbook. Don't make
any manual updates to this table, but it can be used to see who is
assigned to what workbook. You should specify using the standard workbook
for your user id through the properties in the BEx Analyzer. Ensure that
the entry is updated in this table. Also, you will need to close BEx
Analyzer and log back on to see the change.
Regards,
Manjunath

The layout shows data that aren`t in the infocube

Hi.
I have created 3 layouts with BPS with one selection variable.
When I execute the layout, I filter trow the selection variable for one value that isn't in the infocube but the layout shows some records.
I have tried to remove the records form the layout but they shows again.
Any body can help me?
Thanks in advantage.

Hi Javier,
I see 3 possibilities to explain the system behaviour
1. You are using the combination proposal in the planning layout.
2. Some characteristics used in the rows are restricted to one value in the planning package (or level). In the area for new lines the system automatically print out these values to reduce the reduce the amount of work to fill new lines.
3. You are using the Excel In-Place and you have changed some formatting in the Layout Builder. There the system uses dummy data for a preview. Maybe your Excel template contains some of the dummy data. The system usually saves the Excel template without the dummy data but when formatting or the posistion of some column where changed the system might no know the new position to delete the dummy data, cf. documentation
http://help.sap.com/saphelp_nw70/helpdata/en/aa/f73e4045796913e10000000a1550b0/frameset.htm
You can check check the Excel template using transaction bdn1 or oaer (depending of
the release). Use class name = SEM_BPS, class type = OT and object key
= area_level_0-MP_layout where area, level, layout are the technical
names of the planning area, etc. You can display (and down-, upload the
Excel template). One can try to repair the Excel template or update
the layout with the master template and change the formats as suggested
in the documentation.
Regards,
Gregor

The layout in master detail CASE in EXCEL(SPREADSHEET) getting confused

Hi.I'm creating many reports with Report Builder 10gr2.The layout is in PDF.Also I create those reports in EXCEL mode.(I put as the documentation says DESFORMAT=SPREADSHEET).All reports are display in EXCEL have layout the same as before as PDF in the case of tabular report or in case of simple matrix report.
But if we have a complicate report with data group master-detail after the creation as EXCEL the layout getting confused and the columns with master source are in the right and center of the detail columns and finaly the layout is not readable as before.Is there any workaround or solution for this so the layout in EXCEL is the same as in PDF in all cases (TABULAR-MASTER DETAIL etc.)?
Thanks in advance Panos.

Hi.I'm creating many reports with Report Builder 10gr2.The layout is in PDF.Also I create those reports in EXCEL mode.(I put as the documentation says DESFORMAT=SPREADSHEET).All reports are display in EXCEL have layout the same as before as PDF in the case of tabular report or in case of simple matrix report.
But if we have a complicate report with data group master-detail after the creation as EXCEL the layout getting confused and the columns with master source are in the right and center of the detail columns and finaly the layout is not readable as before.Is there any workaround or solution for this so the layout in EXCEL is the same as in PDF in all cases (TABULAR-MASTER DETAIL etc.)?
Thanks in advance Panos.

To go to the Layout section of the Components Palette

Hi,
After I've opened a project within Studio creator 2, how can I go to the Components Palette for further accessing the Layout section?
Thks & Rgds,
HuaMin

This is the wrong forum. Please go here http://forum.java.sun.com/forum.jspa?forumID=881

How to change the layout set for Search Results

Hi gurus.
Im developing a search component for KM Search iView, and as a requirement the layout must change dynamically to display the search results. How do I get this to happen?
public SearchParamsMap getSearchParamsMap() {
     SearchParamsMap m = new SearchParamsMap();
          try {
          IQueryEntryList list =                   this.createQuery();
               m.put(SearchParamConst.PARAM_SEARCH_QUERY_ENTRIES,                list);
          } catch (WcmException e) {
               e.printStackTrace();
          m.put(
               SearchParamConst.PARAM_SEARCH_IN,
               SearchParamConst.SEARCH_FROM_FOLDER);
          m.put(SearchParamConst.PARAM_SEARCH_FOLDER, path);
          return m;
private IQueryEntryList createQuery() throws WcmException {
          Hashtable searchParameters = new Hashtable();
          searchParameters.put(
               SearchParamConst.PARAM_ITEMS_SELECTION,
               SearchParamConst.ITEM_ONLY_DOCS);
          searchParameters.put(
               SearchParamConst.RESULT_LAYOUT_SET,
               "Sed_Comunicados");
          SearchQueryListBuilder sqb =
               new SearchQueryListBuilder(searchParameters);
          IQueryEntryList qel = sqb.buildSearchQueryList();
          return qel;
In the createQuery() method, code searchParameters.put(
               SearchParamConst.RESULT_LAYOUT_SET,
               "Sed_Comunicados"); is not working. Also, where do I find the documentation for Class SearchParamConst?

I have the same question. Any help will be greatly appreciated.

Change the Layout for Create Change Display and   Alv List

Hi All,
I am working on Custom Development WD Application for Maintain   Employee.
I need to Get help/advice to hadle the two Problems.
1) In my application I have to provide Create,Change & display Employee.
Customer needs seperate Link/Application for all Create , Change and Display in Portal.
I thought I am planning to Create Three Application in the WD Component(Create,Change & Display) while Pressing the Application I have to find out what is the Application They Pressed in the Componenet Controller to Change the Layout/Field (Edit/Display/Visisble) according to Create/Change/Display Employee.
For this How to Find the Application name of the WD Componenet.
2) To show the Employee List I am having using ALV LIst.
But my List consuists of 35 Fields. Customer not ready for scrolling the List to see all columns.
I thought I am planning to provide Visible/Invisble columns after providing one button.
If they pressed this button It will next set of Columns with out scrollibng.
How to handle this ?
Kindly help/advise me for both the Problems to proceed further.
Thanks in advance.
Dav

1.For this How to Find the Application name of the WD Componenet.
DATA:
l_api                           type ref to if_wd_component,
l_application_api               type ref to if_wd_application,
l_application_info              type ref to if_wd_rr_application,
lv_name                            type string.
l_api              = wd_this->wd_get_api( ).
l_application_api = l_api->get_application( ).
l_application_info = l_application_api->get_application_info( ).
lv_name = l_application_info->get_name( ).
> 2) To show the Employee List I am having using ALV LIst.
>
> But my List consuists of 35 Fields. Customer not ready for scrolling the List to see all columns.
Are they planning to buy Wide Screen monitor ??
I am not really fan of the solution you propose, at the same time i am not having better idea. I would get the customer on table and see how they would like to have the presentation of 35 columns without scrolling.
ALV provides customization, in that way users can select their own list of columns.

How to retrieve the Sapscript layout changes for a particular Transport request in development server after this Transport request so many requests created ?

Dear Abapers,
I request the Abapers kindly reply for this blog
I want to retrieve the sapscript layout changes for a particular transport request in development server after that many transport request created and moved to quality ?
I checked in SE03 transaction the transport request was there. But I want to retrieve the existing transport request which is not moved to Quality?
Is it possible to retrieve the existing transport request in development which is not moved to quality ?
Like how we retrieving the programs using versions in development server, In the same way I want to retrieve the sapscript layout in development server ?
Thanks & Regards
Muzeebur Rahiman.S

Hi,
There is no version management for SapScript or Smartforms .
When you write "transport request in development which is not moved to quality" - was the transport ever released and exported from the development system? If yes, and if the "Transport files" are still available in "Transport directory" (or if the transport files were backed up and could be retrieved), the transport could be imported again. If the TR was not exported, you are out of luck, I believe...
I would not recommend you do it on your own even if you happen to have enough authorizations (consult with Basis and/or Transport Admin, if you have one in your organization). I would not recommend that it's imported on a development system or QA system, even if the transport contains no other objects - only the SapScript form in question. Import it on a "sand-box" that gets overwritten by system copy from time to time... Once the transport is imported, you should have the old version of SapScript in that system and could analyse the changes and perform manual merge.
cheers
Jānis

Heading Change for keyfigures in the layouts

Similar Messages

Maybe you are looking for