Report node and reports repository

what is the difference between report node and reports repository. I know that Process schedular picks the report from report repository in order to show in process monitor. Does report node and reports repository are same??

After a report runs to success in runstatusYeah, but the files are send to the report repository even if it is not successful terminated (run status is not sucess). If the files are not sent to the report repository, then the problem doesn't come from the process itself, but from the definition, space availibity...
When a report has been posted sucessfully (transfered from the process scheduler report repository - on the other hands the log_output dir, to the report repository defined into the report node), the status of the distribution status is Posted.
The run status and distribution status are independant eachother.
Nicolas.

Similar Messages

Create a tree node and show the report on the same page

Hi,
I have created a tree for our organization and each node represents a unit. The top one is office level and followed by division and brach.
I have created a reprot on the same page as the tree node.
What I want to do is:
I would like to click a specific node and the report shows only that node and bellow. So, If I click division A and division A has two branch. my report shows only those two braches that bellong to division A.
Can someone help me?
Thank you

The only way it could work is using iframes. Now OBIEE 11g would not allow iframes inside it's dashboard. It offers a dashboard object called "Embedded content" which is a restricted iframe kinda thing but unless you get this object's id from generated HTML you can change it's content dynamically. Besides, such an implementation may break with next patch. So here is an idea.
Create a HTML page with two iframes, left one will hold all the reports with links (you can always generate a list of reports through catalog manager, open it in excel and make HTML links from it) that open report urls (in the format of ./saw.dll?GO&Path=....) in right iframe (using javascript open.window method). Once that page is working, call this page from dashboard using an action link. This is slightly twisted approach but at least it would give you what you asked for.
About making the report list dynamic, I am afraid there are no easy answers. OBIEE provides web service that will allow the users to query catalog to get a list of reports. You can try some basic JSP to access the web service and generate the list dynamically. But that is not something I can provide here.

Reports are not posting with report repository webserver configured for Sin

Hi Everyone,
We have configured Single Signon on our Test environment (UADB1) using Sun Authentication Manager. Everything went well, we can login using our LDAP accounts except for one thing. The reports are not posting to the report repository.
Our setup goes like this. We have used only one webserver for login and for report repository purposes. SSL certificate was configured in the webserver and we are using https in the report node. Both URLs https://dv001.test.com:8450 and http://dv001.test.com:8400 were configured for Single Signon.
Report Node Definition
Node Name: uadb1
URL: https://dv001.test.com:8450/psreports/uadb1
Connection Information
https
URI Port: 8450
URI Host: dv001.test.com
URI Resource: SchedulerTransfer/uadb1
Below is the error I am getting. If I will use another webserver which is not the Single Signon configured as report repository the reports are posting. So, I am thinking this has something to do with the Single Signon setup and SSL. ANy idea? Thanks.
PSDSTSRV.2093190 (10) [06/13/10 01:05:43 PostReport](3) 1. Process Instance: 9499/Report Id: 8465/Descr: Process Scheduler System Purge
PSDSTSRV.2093190 (10) [06/13/10 01:05:43 PostReport](3) from directory: /psft/pt849/appserv/prcs/UADB1/log_output/AE_PRCSYSPURGE_9499
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](1) (JNIUTIL): Java exception thrown: java.net.SocketException: Unexpected end of file from server
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](3) HTTP transfer error.
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](3) Post Report Elapsed Time: 0.2300
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](1) =================================Error===============================
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](1) Unable to post report/log file for Process Instance: 9499, Report Id: 8465
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](2) Process Name: PRCSYSPURGE, Type: Application Engine
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](2) Description: Process Scheduler System Purge
PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](2) Directory: /psft/pt849/appserv/prcs/UADB1/log_output/AE_PRCSYSPURGE_94

Duplicated thread : Reports not posting if using Single Signon webserver as report repo
Nicolas.

PSUNX failed to post files to the report repository

Dear All,
i've just faced this issue. Before submitting here, this i've tried various things posted on web but not getting the solution,So posting here.
If someone might have an idea about this...
These are my settings
Report Node Definition URL
http://irshr.irs.co.id:8000/psreports/irshr
URI Host: irshr.irs.co.id
URI Resource:SchedulerTransfer/irshr
Peoplesoft ligin URL :http://irshr.irs.co.id:8000/psp/irshr/EMPLOYEE/HRMS......
and the error
     11:18:07AM      Request is reassigned from server PSNT to server PSUNX
10      11:18:19AM      Process request completed successfully.
10      11:18:33AM      Java Exception: Error while wr ite to file:java.lang.StringIn dexOutOfBoundsException: Strin g index out of range: -1 (63, 49)
10      11:18:33AM      SchedulerTransfer Servlet error.
     11:18:33AM      PSUNX failed to post files to the report repository. Server scheduled to try again on 2011-02-07-11.18.47.999881. See log
10      11:18:48AM      Java Exception: Error while wr ite to file:java.lang.StringIn dexOutOfBoundsException: Strin g index out of range: -1 (63, 49)
10      11:18:48AM      SchedulerTransfer Servlet error.
     11:18:48AM      PSUNX failed to post files to the report repository. Server scheduled to try again on 2011-02-07-11.19.02.999526. See log
10      11:19:03AM      Java Exception: Error while wr ite to file:java.lang.StringIn dexOutOfBoundsException: Strin g index out of range: -1 (63, 49)
10      11:19:03AM      SchedulerTransfer Servlet error.
     11:19:03AM      HTTP transfer error.Also have the role "process sheduler admin" assigned to PS.
Standard reports of Peoplsoft are running well but this is a customised SQR report that is giving error.
-Regards

Michel,
This is the SQR code.(My first SQR report) :-)
! IRSEMPCN.sqr: Employee Report                                 *
! Description: Employee Report
!               Confidentiality Information:                           *
! This module contains confidential and proprietary information        *
! of Oracle; it is not to be copied, reproduced, or transmitted        *
! in any form, by any means, in whole or in part, nor is it to         *
! be used for any purpose other than that for which it is              *
! expressly provided under the applicable license agreement.           *
! Copyright (C) 2007 Oracle. All Rights Reserved.                      *
!       Creator     : ****                                    *
!       Date       : 29 Juni 2010                                      *
#Include 'setenv.sqc'    !Set environment
#Include 'datetime.sqc' !Routines for date and time formatting
#Include 'number.sqc'    !Routines to format numbers
#Include 'stdapi.sqc'
#Include 'datetime.sqc' !Routines for date and time formatting
#Include 'datemath.sqc' !Routines for date arithmetic
#Include 'number.sqc'    !Routines to format numbers
begin-report
do Init-DateTime
do Init-Number
do Get-Current-DateTime
do Init-Report
! do Reset
do Stdapi-Term
end-report
begin-setup
declare-variable
    text      $BU
!    text1     $plant
!    text2         $empid
end-declare
end-setup
! Procedure: Init-Report
! Description: Initialise header and run control variables.
begin-procedure Init-Report
move 'IRSEM1' to $ReportID
move 'IRS Employee' to $ReportTitle
do Stdapi-Init
if $prcs_process_instance = ''
else
     do Select-Parameters
end-if
do Report
end-procedure
! Procedure: Select-Parameters
! Description : Select the parameter values from the run control page
begin-procedure Select-Parameters
begin-select
PARA.IRS_BU
let $BU    = &PARA.IRS_BU
! let $plant = &PARA.IRS_DEPT
FROM PS_PRCSRUNCNTL_EMP PARA
WHERE PARA.OPRID       = $prcs_oprid
AND   PARA.RUN_CNTL_ID = $prcs_run_cntl_id
end-select
do Get-OPRCLASS ($prcs_oprid,$oprclass)
do Get-SetId($oprclass, $setid)
!do Process-Get-Employee-Details($emplid)
end-procedure
! Procedure: Get-OPRCLASS                                              !
! Descr:     Get operator class                                        !
BEGIN-PROCEDURE Get-OPRCLASS ($PRCS_OPRID, :$oprclass)
LET $OPRCLASS =''
BEGIN-SELECT
OPRCLASS    &OPRCLASS
   move &OPRCLASS   to $oprclass
FROM PSOPRDEFN
WHERE OPRID = $PRCS_OPRID
END-SELECT
END-PROCEDURE Get-OPRCLASS
! Procedure: Get-SetId                                                 !
! Descr:     Get Set ID                                                !
BEGIN-PROCEDURE Get-SetId($OPRCLASS, :$setid)
LET $setid =''
BEGIN-SELECT
SETID    &SETID
   move &SETID   to $setid
FROM PS_OPR_DEF_TBL_HR
WHERE OPRCLASS = $OPRCLASS
END-SELECT
END-PROCEDURE Get-SetId
! Procedure: Report
! Description:
begin-procedure Report
    !let $FileName = 'E:\psft\psdmo\sqr\' || 'IRSEM1' || to_char(#prcs_process_instance) || '.csv'
    let $FileName = '{FILEPREFIX}' || '\IRSEM1' || '.csv'
    open $FileName as 1 for-writing record=20000:VARY
    write 1 from 'Business Unit,Department,Grade,Count'
    do Process-Get-Employee-Details($BU)
    close 1
end-procedure
! Procedure: Process-Get-Employee-Name
! Description: Get Employee Name
begin-procedure Process-Get-Employee-Details($BU)
begin-select
PS_BUSUNIT_HR_VW.DESCR        &BUSINESSUNIT ,
PS_DEPT_TBL.DESCR             &DEPARTMENT ,
PS_JOBCODE_TBL.DESCR          &GRADE ,
COUNT(PS_JOBCODE_TBL.DESCR)   &COUNT
   move &BUSINESSUNIT to $BUSINESSUNIT
   move &DEPARTMENT    to $DEPARTMENT
   move &GRADE         to $GRADE
   move &COUNT         to $COUNT
   write 1 from $BUSINESSUNIT ',' $DEPARTMENT ',' $GRADE ',' $COUNT
From PS_JOB,PS_JOBCODE_TBL,PS_BUSUNIT_HR_VW,PS_DEPT_TBL
Where PS_JOB.Jobcode=PS_JOBCODE_TBL.Jobcode
and PS_JOB.BUSINESS_UNIT=PS_BUSUNIT_HR_VW.BUSINESS_UNIT
AND PS_JOB.DEPTID=PS_DEPT_TBL.DEPTID
AND PS_DEPT_TBL.EFF_STATUS='A'
And Rownum<5
Group by PS_BUSUNIT_HR_VW.DESCR,PS_DEPT_TBL.DESCR,PS_JOBCODE_TBL.DESCR
Order by PS_BUSUNIT_HR_VW.DESCR
end-select
end-procedure

Issue with report repository

Hi,
I installed the new peoplesoft FSCM9.0/PT8.49 environment for personal use. My PS_HOME path is D:/PT8.49. my appserver and prcs server name is PSFIN9. I am using the report repository path as D:/psreports when install the webserver and updated the web profile also with the same path.
In the report node if i enter URI source as SchedulerTransfer/<site name> reports are not posting to report repository. If I remove that entry from report node reports are posting to D:/PSFIN9 folder which is created when reports are posted. But when I click on log files link on process monitor getting the file not found error as it is refering to D:\psreports directory.
Please help me on this.
Thanks,
Kiran

You might want to have a look at
https://metalink3.oracle.com/od/faces/secure/km/DocumentDisplay.jspx?id=611434.1&h=Y
https://metalink3.oracle.com/od/faces/secure/km/DocumentDisplay.jspx?id=621763.1&h=Y
psreport URL ?
Thanks
Edited by: !Xoble on Mar 20, 2009 11:23 AM

Where is the value of report repository stored in the database?

Hi all,
One of our developers is trying to write a code that would send the output report (pdf)of a process through mail, typical work flow stuff.But the problem is that we are not supposed to hard code the value of report repositiry from where the report has to be picked.can anybody suggest a table in the database from where the value of report repository can be queried.
we tried using
select reportrepositorypt from pswebprofile.
but this doesnt return the correct path. we went to PIA->peopletools->webprofile ->webprofie configuration
here we updated the value in report repository field and saved it and queried again.
But this didnt solve our problem.
Its showing the previous value which is different from the actual report repository path.
all the servers are in solaris box.
please suggets.
Thanks!

Right now, I am trying to send a PDF (XML Publisher report) as an email to our vendors (it is their ACH Advice).
What I have done so far is: Created an App Engine, one step to populate a state record with run control information and the second step that runs XML Publisher and creates PDF report(s) which are published to the Report Repository and saved to a file on our network. Now I think I just need to create a third step to recall the PDF(s) and send the PDF(s) out as emails to our vendors.
I have found that the PDF information from Report Repository is stored in the Database in the CDM_LIST_VW record (this is a view and the main underlying table is CDM_LIST, but this contains what I need for now, so I'm going to try using it first). The Report ID is stored in the CONTENTID field and the Report Description (description shown on the Report Repository -- which in our case contains the email address) is stored in the CONTENT_DESCR field. So I am going to try over the next week to write the logic to query the CDM_LIST_VW for the data needed for the email address and the ReportID to go and grab the file....The hardest part is finding the actual file but I am hoping that I can also find a URL on that table. I'd pull the file from the network, but XML Publisher writes them out into numbered folders where all the PDFs are named the XML Report Defn - thus same name). I have not tried any of this yet, but am hoping I'm on the right path.
I hope this helped answer your question.
Good Luck!
Jennifer

DataBase Based Report Repository

Iam trying to set up oracle DB as report repository . Getting this error while starting BI Publisher server
[031308_024724406][][EXCEPTION] oracle.classloader.util.AnnotatedClassNotFoundEx
ception:
Missing class: oracle.jdbc.driver.oracleDriver
Dependent class: oracle.apps.xdo.servlet.data.JDBCDataSource
Loader: xmlpserver.web.xmlpserver:0.0.0
Code-Source: /D:/OraHome_1/j2ee/home/applications/xmlpserver/xmlpser
ver/WEB-INF/lib/xmlpserver.jar
Configuration: WEB-INF/lib/ directory in D:\OraHome_1\j2ee\home\applic
ations\xmlpserver\xmlpserver\WEB-INF\lib
This load was initiated at xmlpserver.web.xmlpserver:0.0.0 using the Class.forNa
me() method.
The missing class is not available from any code-source or loader in the system.
at oracle.classloader.PolicyClassLoader.handleClassNotFound (PolicyClass
Loader.java:2068) [/D:/OraHome_1/j2ee/home/lib/pcl.jar (from system property jav
a.class.path), by sun.misc.Launcher$AppClassLoader@10719543]
[031308_041213437][][ERROR] Failed to load key: unable to obtain lock.
Can somebody help me resolve this issue

That is achievable.
The password on the login screen is saved inside an xml file snps_login_work.xml in an encrypted format.
All you got to do is distribute a generic copy that xml file with the connection information saved and distribute it to the users.

Data modeler reporting repository & process model metdata

Hi,
From reporting repository schema ,Can one query "Source Target mapping information" provided in Transformation tasks in Process model.
Is this feature supported in latest 4.1?
Thanks in advance!

Thank you Philip,
We are doing reports in TOAD and Cognos 8.
So far so good. One of the pieces of information I need out of the Oracle Data Modeler reporting schema is the columns in foreign keys. Foreign keys are not usually enforced in datamarts but data analysts must know what the foreign keys are to join tables.
There is a notation in Relational Model Elements.pdf "Foreign keys of DMR_CONSTR_INDEX_COLUMNS table are not valid since one column is used to refer to objects in two different tables"
This begs the question: Is there a valid foreign key in DMRS_CONSTR_INDEX_COLUMNS to join it to DMRS_FOREIGNKEYS or is the model documented incorrectly?
The repository adds tremendous value to Data Modeler.
Gerhardt

SQL Data Modeler reporting repository data model

SQL Data Modeler (SDM) reporting repository data model
I exported several models to reporting schema and reviewed the reports. So far so good. The reports I need are not included so I'm creating my own. I imported the reporting schema to SDM to explore the model and see how to join the tables. Has anyone already done this exercise and produced a data model for the reporting schema with primary keys, foreign keys and relationships? It would save me a pile of work if I could download the model and import it to SDM?
Gerhardt

Thank you Philip,
We are doing reports in TOAD and Cognos 8.
So far so good. One of the pieces of information I need out of the Oracle Data Modeler reporting schema is the columns in foreign keys. Foreign keys are not usually enforced in datamarts but data analysts must know what the foreign keys are to join tables.
There is a notation in Relational Model Elements.pdf "Foreign keys of DMR_CONSTR_INDEX_COLUMNS table are not valid since one column is used to refer to objects in two different tables"
This begs the question: Is there a valid foreign key in DMRS_CONSTR_INDEX_COLUMNS to join it to DMRS_FOREIGNKEYS or is the model documented incorrectly?
The repository adds tremendous value to Data Modeler.
Gerhardt

Error while saving model to the reporting repository with logical views

I have created a view object in the logical model based on objects from the logical model. When I try to save the model to the reporting repository, an error occurs.` If I remove the view object, I can successfully save the model to the reporting repository. Here is the log detail:
2012-03-01 14:00:50,419 [Thread-71] ERROR ReportsHandler - Error Exporting to Reporting Schema:
java.lang.ClassCastException: oracle.dbtools.crest.model.design.logical.AttributeView cannot be cast to oracle.dbtools.crest.model.design.logical.Attribute
     at oracle.dbtools.crest.model.design.logical.LogicalDesign.getObjectsWithMeasurements(Unknown Source)
     at oracle.dbtools.crest.exports.reports.RSMeasurements.export(Unknown Source)
     at oracle.dbtools.crest.exports.reports.ReportsHandler.export(Unknown Source)
     at oracle.dbtools.crest.swingui.ControllerApplication$ExportToReportsSchema$1.run(Unknown Source)
Any thoughts on what is wrong.
Thanks

Hi,
thanks for feedback.
Any thoughts on what is wrong.The program code is wrong - I logged bug for that.
Philip

List of reports in the reporting repository

Hello !
Some time after upgrading to SP15 I have found that there is no more list of reports in the configuration of reporting repository. Is it really so or it is my local problem, connected maybe with errors during installation of SP15 ?

Hi!
It's all ok with your reporting repository configuration, this list was removed. Instead you can activate or deactivate single reports directly in the "Reports" area.
You find it after you turned on advanced mode within the repository manager area under "Related Areas".
It is better to have only one place where you configure a report. I always forgot to enable a report in the repository manager after I created it.
bye, Dirk

"Oracle SQL Developer Data Modeler reporting repository required"

Hi all,
Trying to make use of Data Modeler Reports from within SQL Dev EA 2.1, but every time I try to connect to a DB I get the following message "Oracle SQL Developer Data Modeler reporting repository required."
Any idea how to go about sorting this out?
Thanks

Hi i have the Oracle SQL Developer Data Modeler version 2.0.0 installed.
When i try to export one diagram to the reporting schema, i get the following error : "Error occurred while exporting to Reporting Schema.See the log file for details".
The log file has no errors.
The repository owner is DBA.
The connection is ok.
Can you help me?
Thanks in advance
Paolo.

Report Repository

Hi,
In the BI Publisher admin console on the "Admin" tab under "System Administration -->Report Repository", it looks like there is a way to configure where report templates are stored (file system vs. xml db).
We have shared BI Publisher environment in that different business users are using it to generate different types of unrelated reports. There are also different development teams authoring the different templates for each business unit. So, if possible, we would like to keep the templates stored separately. Is there a way to configure BI Publisher so that there different "Report Repositories" (i.e. storage locations) for different reports?
Thanks.
Edited by: user9932522 on Feb 1, 2010 11:58 AM
Edited by: user9932522 on Feb 1, 2010 11:59 AM

For now, it is single repository ,
why don't you restrict the user to their specific folders.

Replication between 130 nodes and 1 Data Center

Hi everyone.
I have 130 database nodes (Oracle Standard Edition One) with a big distance of separation, and 1 Data Center with 3 nodes (Oracle Real Application Cluster 10g R2). The connection between nodes and datacenter is through various ISP ( WAN).
I have exactly the same model design of database in nodes and datacenter.
DataCenter is a repository of data for reporting to directors and dictate the business rules to guide all nodes.
Each node have approximately 15 machines connected with desktop application.
In other words Desktop Application with a Backend Database (node).
My idea of replication is not instantly, when a transaction commit in a node then replicate to datacenter. Also over nigth replicate images because is heavy, approximately 1 mg per image. Each image correspond to one transaction.
On the orher hand i have to replicate some data from datacenter to nodes, business rule, for example: new company names, new persons, new prohibitions, etc.
My problem is to determine th best way to replicate data through nodes to datacenter.
Please somebody could suggest me the best solution.
Thanks in advanced.

Last I checked, Streams and multi-master replication require enterprise edition databases at both ends, which rules them out for the sort of deployment you're envisioning.
If a given table will only ever be modified on nodes or on the master site, never both, you can build everything as read-only materialized views. This would probably require, though, that the server at the data center have 130 copies of each table, 1 per node. For schemas of any size, this obviously gets complicated very quickly. For asynchronous replcation to work, you'd need to schedule periodic refreshes, which assumes that you have relatively stable internet connections between the nodes and the data center.
I guess I would tend to question the utility of having so many nodes. Is it really necessary to have so many? Or could you just beef up the master and have everyone connect directly?
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

Is there a way to "mix" the nodes and leaves of the tree so if they are at the same level, they will display in a specified order.

Is there a way to "mix" the nodes and leaves of the tree so that even if they are at the same level (1,2,3...), they will display in a specified order (via sort sequence, alphabetical, etc.).
History:
We are using the Tree UI element to display/manage a material bom interface. We seem to be running into an issue with displaying the nodes/leaves of the tree.. regardless of the order that the context is built (which is currently the order of the exploded BOM from from CS_BOM_EXPL_MAT_V2), the bom is displayed with the nested boms at the top of each level and the single materials below them. For example. If TK1 contains Material1, Material2, Material3, Kit1(containing component1, comp2, comp3), Material4, Kit2(containing comp4, comp5, comp6), and Material5 (in this order), the tree will display with the A level node as TK1, the next node as Kit1 (with its subleaves of comp1,comp2,comp3), Kit2(with subleaves of comp4,comp5,comp6), THEN Material1, material2, material3, material4, material5. Our users are adamant about the items displaying in the correct order (which should be alphabetical based on the description for one report and by location for purposes of inventory for another). I've searched but not been able to locate a similar question. If I've missed it, please point me in the right direction. The users want the tree, not a "tree" table. This is our first attempt at the tree, so maybe we're missing something basic?
TK1
-Mat1
-Mat2
-Mat3
-Kit1
--Comp1
--Comp2
--Comp3
-Mat4
-Kit2
--Comp4
--comp5
--comp6
-Material5
displays as
TK1
-Kit1
--Comp1
--Comp2
--Comp3
-Kit2
--Comp4
--Comp5
--Comp6
-Mat1
-Mat2
-Mat3
-Mat4
-Mat5

co-workers said example picture is misleading.. we can make the order work if everything is a "folder" but not a mix of "folders" and "files" (if making a visual reference to the windows browser). i.e - a file is represented as an empty folder.
TK1
. Mat1
. Mat2
. mat3
> kit1
.. comp1
.. comp2
.. comp3
. mat4
> kit2
.. comp4
.. comp5
.. comp6
. mat5
displays at
TK1
> kit1
.. comp1
.. comp2
.. comp3
> kit2
.. comp4
.. comp5
.. comp6
. mat1
. mat2
. mat3
. mat4
. mat5
we can make it work if everything is a folder. This is our current workaround.
TK1
> mat1
> mat2
> mat3
v kit1 (when expanded)
.. comp1
.. comp2
.. comp3
> mat4
> kit2 (when not expanded)
> mat5

Report node and reports repository

Similar Messages

Maybe you are looking for