Hello everyone !  As any developer I got the iOS 7 beta on my iPad mini , before few days when I used my iPad it says that it's not activated, and I can't activate it using the iPad , When I plug it on my win so I can restore it using iTunes , I got to er

Hello everyone !
As any developer I got the iOS 7 beta on my iPad mini , before few days when I used my iPad forgot my passwaor, and I can't unlock it using the iPad , When I plug it on my window so I can restore it using iTunes , I got to errors , once "Unkown error 3004" and once "It's not eligble".
I hope you can help me.
Thanks,

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
The iPad's Mail app has no provisions for creating groups. However, you can use a third party app that many users recommend.
MailShot -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email  -  https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

Similar Messages

  • When trying to get updates it says that I am not conntected and to check my network.  How do I fix this?

    When trying to get an update, a message reads that it cannot connect and to check the network setting.  I can get the internet, so I dont know how the fix this. 

    Temporarily turn off the anti-virus and firewall software on your PC before attempting to get the update

  • After getting a new desktop I downloaded iTunes and authorized my new computer and then de-authorized my old one,  When I try to update my 5S it says my phone is not authorized and list my wifes email address as the account holder and not mine.  How

    After getting a new desktop I downloaded iTunes and authorized my new computer and then de-authorized my old one,  When I try to update my 5S it says my phone is not authorized and list my wifes email address as the account holder and not mine.  How do I correct this. I am using Windows 8.1 .  My wife has never had an iTuunes account

    Hello Lakesidetom,
    It sounds as though you are experiencing an issue with an Apple ID and authorizations. Based on your post, it sounds like you are familiar with the authorizing and deauthorizing process. The Apple ID in question (your wife's email) may be originating from the iPhone you are attempting to update. Is it possible that your wife created an Apple ID or iCloud account which is signed in on that iPhone? Below, I have included links to some resources that may help you determine if your wife has created an Apple ID:
    How to find your Apple ID - Apple Support
    Use these steps if you forgot your Apple ID or aren't sure that you have one.
    Apple - My Apple ID
    If you can't remember your Apple ID, just provide us with some information and we'll find it for you. Then we'll help you reset your password.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    Bobby_D

  • I just got an iPod shuffle yesterday and I have downloaded the latest update for iTunes (10.7) and when I plugin it in it says that I have not got the correct software for the iPod

    I just got an iPod shuffle yesterday and I have downloaded the latest update for iTunes (10.7) and when I plugin it in it says that I have not got the correct software for the iPod

    What is the exact error message you are receiving?  Have you checked to make sure the connections on each end of the USB cable are nice and snug?
    B-rock

  • Good morning. I returned to live in Brazil and I need to use my iPhone4s here but that are blocked by verizon and I will would like to request the unlock of this. Does someone know how to do this?

    Good morning. I returned to live in Brazil and I need to use my iPhone4s here but that are blocked by verizon and I will would like to request the unlock of this. Does someone know how to do this?

    I don't have my account anymore ttipgem.....

  • Hi, I have an ipod touch, i had it since christmas of 2010, My wifi has been PERFECT until a few days ago and then now, the blue wifi thing says i am connected, but when i go to safari it says that it's not. help? : )

    I have an ipod touch, i had it since christmas of 2010, My wifi has been PERFECT until a few days ago and then now, the blue wifi thing says i am connected, but when i go to safari it says that it's not. help? : )

    - Reset the iPod. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections

  • I updated my iphone 3gs to ios 5.0.1 from ios 4 , now its saying that sim is not activated but the sim is still inside

    i updated my iphone 3gs to ios 5.0.1 from ios 4 , now its saying that sim is not activated but the sim is still inside
    PLSS HELP ME OUT !!!!

    Sounds like your phone was hacked to work with any network. Doing the update re-locked it to the original carrier. All you can do now is contact the carrier it is locked to to see if they have an unlocking policy. Note that if it's AT&T they do not offer unlocking. otherwise find an un-activated sim for the original carrier and you can use it as an iPod.

  • I was trying to update my garageband app and once the app fully downloads it says that it could not install and to check my internet connection. I restarted my internet, turned it off and on, restarted my computer, and nothing works what do i do

    I was trying to update my garageband app and once the app fully downloads it says that it could not install and to check my internet connection. I restarted my internet, turned it off and on, restarted my computer, deleted the app and downloaded it again and the same thing happened every time. What should I do?

    Do you have any firewalls or antivirus software active (e.g. Little Snitch), that could prevent the installer from contacting the Apple Servers? If yes, turn them off.  Also, disable the Energy saver, to prevent the Mac from falling asleep and causing time outs.
    Sometimes it will help, to run the installer in Safe Mode, see:  Mac OS X: What is Safe Boot, Safe Mode?

  • When I open logic express 8 with eyetv open but not active and i close logic express 8 and make eyetv active it won't show closed captioning even though closed captioning is turned on

    when I open logic express 8 with eyetv open but not active and i close logic express 8 and make eyetv active eyetv won't show closed captioning even though closed captioning is turned on.  When I totally close eyetv and reopen eyetv and open a live tv window the closed captioning comes back.  I never noticed this with os leopard, Just after i installed os snow leopard.  All software is up to date only I think, thanks to apple they droped support for logic express.  Thanks for any suggestions.

    Does toggling CC off & back on bring it back?
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

  • When i sync my iphone it says that there is not enough room in my itunes library what do I do?

    When I try to sync my iPhone with iTunes, it says that there is not enough room in my itunes library for my phone to sync. Why is this? Do I need to delete stuff off my library? Or is my laptop too full? Or is it that my phone hasn't got enough space? ...Or something else?

    Why is this so difficult to figure out?
    The message is quite clear.  The size of the iTunes library is larger than the space available on the device.
    Stop attempting to sync the entire library to the device.
    Select the desired content to sync to the device.
    Sync.

  • Hi. i just downloaded this update for my macbook air and when i turn it on it says it needs to be restarted and so i do restart it. but the messages pops up again. i cant use the computer please help.

    hi so i just dpownloaded the mac os lion but when i turn my mac it says please restart it and when i do i get the message again. i am travelling soon and i need my mac to be fixed. please help me.

    Did you purchase your MacBook Air new?  Do you still have its box?  Locate its serial number and telephone Apple at the number shown at the bottom of this page (1-800-MY-APPLE if you're in the U.S.).  They can help you.

  • My MacBook Pro has a 500GB Hard Drive (HD), but when I search my capacity I says that I only have 384.99 GBs of capacity. Where are the other 100GBs?

    My Mac has been a little slow, so I figured that I should make sure that I have enough storage capacity on my Hard Drive (HD). In doing so I realized that my HD is missing 100GB of space capacity. I thought that my HD was supposed to at least 499.25 of available space.
    When using "About this Mac", it clearly shows that I only have 384.99 GB of capacity.
    Where are the other 100 GB? I should mention that I recently deleted a partition for that same amount of storage. That has to have something to do with this? Can you help me?
    About My Mac:
    OS X Yosemite
    Version 10.10.1
    MacBook Pro (15"-inch, Early 2011)
    Processor: 2GHz Intel Core i7
    Memory: 4GB 1333 MHz DDR3
    Dish Description: TOSHIBA MK5065GSXF Media

    Discrepancy in calculating space between Finder and Disk Utility
    “Finder does not take into account the  Backups/ local snapshots,
    but disk utility includes them.”
    http://pondini.org/TM/30.html
    Disk space / Time Machine ?/ Local Snapshots
    Local backups
    http://support.apple.com/kb/ht4878

  • When opening, safari 5.1 browser says that info in not encrypted.

    Why is safari 5.1 telling me that info is not encrypted, everytime I open the browser? 

    Launch System Preferences and click on the “General” icon
    At the bottom of the “Number of recent items” list, uncheck the checkbox next to “Restore windows when quitting and re-opening apps”
    This worked for me. For some reason it only seems to work (or annoy me) in Safari.

  • I have wi-fi in my house but when i try to connect it says that is unable to connect and it has been like this for four days now. What do i do?

    and when it does says that im connected it says that thres no wifi?

    Try reading these:
    Joining and troubleshooting Wi-Fi networks
    Troubleshooting Wi-Fi networks and connections

  • I am on an iPad and can't tex my mates as it says that they are not registered and I know they are. I am in Australia and they are in Canada. Please help

    I thought it was an issue between my son and I but I just tried someone else and it also doesn't work. So???PLEASE HELP!! Thank You. I am using the latest iPad - the 3? And aim trying to contact iPhone 3 users and iPod users.

    At this point, I would go for reset to its factory default condition, using the iTunes program to get a clean system install. That way you'll clean everything out and just have it set up the way it would come from the factory. You'll need to do your backup (on the iTunes program too) and be sure you understand which stuff will be saved and which will not (from the links below). Also turn off any anti-virus program you may have on your desktop. Then when you reset it to the factory default condition, don't restore your backup just yet ... until you check it out without your data put back on it. Verify its operation first, to make sure that you know it's okay. Hopefully everything is okay at that point, otherwise you'll have to take it into Apple to check it out for any hardware failure.
    Here are the links, and the last one pertains to the reset to factory default condition ...
    Choosing an iOS Backup Method (Should I Use iTunes or iCloud to back up ...)https://support.apple.com/kb/HT5262
    Back up and Restore your iOS Device with iCloud or iTunes
    http://support.apple.com/kb/ht1766
    iTunes: About iOS Backups
    http://support.apple.com/kb/ht4946
    Create and Delete iPhone, iPad and iPod Touch Backups in iTunes
    http://support.apple.com/kb/ht4946
    iOS: Troubleshooting Encrypted Backups
    http://support.apple.com/kb/TS5162
    Use iTunes to Restore your iOS Device to Factory Settings
    http://support.apple.com/kb/ht1414

Maybe you are looking for

  • Can anybody help with problems with Mail & Backup, please?

    Hi, yesterday, for some reason, a problem developed with Mail. Without me changing anything, while it will send and receive e-mails through my Apple account, it has stopped downloading emails from my BT account, which previously worked fine. It keeps

  • How to use jpg files as a background in a Frame

    Could anyone help me to figure out how to get jpg files set as my background of my Frame. I have used Awt to create my frame. Should i use the swing classes to do this? If so could you help me with what is needed to be done to accomplish this task. T

  • HELP - DEGRADED PICTURE QUALITY

    Hi. I am using the new Sony Memory Stick Handycam HDR-CX11E to take my movies with. Click the link below for camcorder details. http://www.sony.co.uk/product/cam-high-definition-on-memory-stick/hdr-cx11e I am recording in Standard Definition HQ, MPEG

  • Check Printing Standard Format

    Q: Is There any Standard Page Formats For Check. e.g ICICI (Only For Check)....?     Width: 20.2 CentiMeters.      Hight: 9.3 CentiMeters. NOTE: Using SAP Script.

  • Access a WS defined in XI from NWDS

    Hi, I've configured a SOAP Adapter in XI. I can access it from XMLSpy with success. Inside NWDS, I've created a new portal component. I've added a new portal service with the wsdl generated by IB:Design. I have also added a DynPage like in the exampl