Hello I Have a problem that i cant solve i have itunes 10.2 went to 10.5 but i cant get anything to work comes up with (could not access network location ).I have checked my firewall settings tweaked as much as i can but not able to install itunes nor qui
Hello Im Having A Problem With Itunes im Not Able to reinstall itunes at all nor quicktime and bonjour service is not working either .i have tried tweaking my firewall but to no avail hoping someone can help me cos apple sure cant typical like politicians they sway away from the problem and blame someone else ?.
Well you need to understand the behavior of h-reap or what it's called now, FlexConnect. In this mode, the clients are still remembers on the WLC until the session timer/idle timer expires. So switching between SSID's in h-reap will not be the same when switching when the AP's are in local mode.
Take a look at the client when connected in FlexConnect in the WLC GUI monitor tab. Thus will show you what ssid and vlan the client is on. Now switch to a different ssid and compare this. It's probably the same because the client has not timed out. Now go back to the other ssid and look again. Now on the WLC, remove or delete the client and then switch to the other ssid at the same time. Or switch SSID's and then remove the client. The client will join the new ssid and in the monitor tab, you should see the info.
There is no need to have clients have multiple SSID's unless your testing. Devices should only have one ssid profile configured to eliminate any connectivity issues from the device wanting to switch SSID's.
Sent from Cisco Technical Support iPhone App
Similar Messages
-
can anyone help with problem updating iphone5s cant get anything only apple on screen sometimes screen flashes blue
Hey damien555,
Thanks for the question, I understand how frustrating this may be. It sounds like the update process may have been interrupted, and to resolve the issue, we’ll need to restore your device in recovery mode with iTunes:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Thanks,
Matt M. -
im trying to restore my iPhone 5 and its gone into recovery mode and won't go out I've gone on to iTunes it says that its in recovery mode and to restore it after about 10 seconds it come up with could not restore unknown error occurred (9) i wonder if you could help
you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
If that does not work, take in for service
Genius reservation http://www.apple.com/retail/geniusbar/ -
Hi! Need help desperately! I downloaded Reader 9.1 and it won't install. Get the error message "Error 1606. Could not access network location %APPDATA%\. Thanks!
Hello again:
I don't mean to step on any toes here but it seems that the root of the problem is being ignored. I offered before that the problems you are experiencing are due to inconsistencies in the Windows registry. While I could speculate on the various methods of how this came to be, I don't have that kind of time nor is there a need. More than likely it is some type of malware that has infected the system but that should be explored on more suited forums such as MajorGeeks.com or BleepingComputer.com. The way I see it, you have a few paths you can take, all of which will lead you to the same place: no more error 1606 and a functional Reader:
Option 1: Run the Windows Live OneCare free safety scanner to resolve any broken registry links it can find.
Option 2: Manually fix the "broken" registry entries in the Windows registry. While I understand Pat's hesitation to do so, the truth of the matter is it will resolve the immediate issue. Once the APPDATA path is corrected, you should then be able to install Reader.
Option 3: Restore Windows to a previous date using System Restore located in Help & Support of the Start menu.
Option 4: [SLEDGE HAMMER] Reinstall Windows over the top of the current installation (NO FORMAT). Use this option only if you have no other recourse. The potential to lose all personal data and settings is high if this option is not performed correctly. If this option is chosen, be certain to use a "setup" profile (username) different than your current username. If you only have a manufacturer's system restore disk rather than a Windows CD/DVD, you may not have the option NOT to format which WILL result in the loss of personal data. This option should only be performed by someone who has previous knowledge of such or is willing to learn even at the expense of data loss/time/effort.
I HIGHLY recommend that any and all personal data is backed up to an external location such as a USB key, CD/DVD, or external hard drive prior to performing option 2 or 4 above. If you would like any of the options explained in greater detail, feel free to ask and I will oblige.
Best of success!
Michael -
An assortment of problems that I cant get my head round.
Okay, so Im making a basic game for a college project, and I have a few problems that really just dont make sense to me or I simply dont know how to do.
Heres a zip of the .fla and as3 files:
http://www.mediafire.com/?7v2wfcgd47h7xv3
The first issue I have is that where the player spawns, a sort of invisible block is left and the player is unable to enter that area. This also happens when the trigger block is destroyed. I'm sure I've used the same code before for the same idea and it worked, but alas, this doesnt.
As you'll notice, currently the enemy code is quite complex. I was wondering if theres a way to put some code in the enemy class and set it so that if it hits a waypoint to simple reverse its direction
The third point is that, the current graphics used are obviously horrible and will be invisible when the final game is made. How do i make it so that when the blockNorm object is made, it makes say blockNormSkin at its exact location. It would be good if this is inside the blockNorm class so that it does them all automatically and I dont have to code them all indivdually.
Relating to the above point, instead of that I tried just drawing on the actual graphics I wanted to use. This resulted in the player object not working properly at all. (I know this is vague, and so if you have any idea why this happened, say and I'll try post an example of it).
I think thats everything, but I may update the post later if I remember anything. I know this is a lot, so any help about any of the points would be a great help. Thanks!Hi
First, an important note dont use method names with uppercase as the first letter only for class names, like that:
class ShareInPortfolio - is ok
void Addshare(ShareInPortfolio s) - should be: void addShare(ShareInPortfolio s)
there is a convesion for the JAVA language.
Second: unitTest method is a part of a class, so make it static method and rename the name from UnitTest to unitTest and call it like this: CLASSNAME.unitTest
Ohad -
Creative Cloud is telling me "Unable to reach Adobe servers. Please check your firewall settings, and try again in a few minutes.
What do I do to access the cloud? I have checked my firewall settings to allow for me to be able to use adobe cloud. Any Suggestions?Try a different browser and/or turn your firewall off to download
or
A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html -
Not sure if anyone can help but I have a copy of Photoshop CS5.1. Ever since it was installed, every now and again when I try do something simple like save a file or scale something using the Transform tool, in fact anything at all it comes up with "Could not complete your request because of a program error". Have thought about re-installing it but I have lost my serial number. I'm living in Ireland and trying to get to talk to someone in tech support is a complete joke. Any ideas what to do ? Thanks
Ianp69549740 have you tried reinstalling Photoshop CS5.1? If so do you receive any specific errors? What operating system are you using?
-
I have files that say they are missing or offline. I have checked all my folders off of lightroom and they can not be found. I have used the ? mark settings to find and still not found. I can see the images on lightroom so they have to be in my system some how. How can I retrieve these images? Is there a re boot for lightroom? Need help ASAP!
You have probably moved the files outside of Lightroom. The images you see in LR are previews that were made before you moved the files.
Do a search for the files/folders using your computers operating system. (Explorer/Finder)
Once you have found them, you can point LR to the right location. -
I get "mail server does not recognize your Apple ID and password" when I try to share a picture via email in iPhoto. My iCloud email works ok otherwise. I have checked all mail settings for ID and password.
In the iPhoto preferences ==> accounts delete the account and re-enter it - sometimes that resolves this
Or IMHO the best long term solution is to set Apple Mail as the iPhoto e-mail client in the iPhoto preferences and use it - it has a number of advatages and has fewer problems
LN -
Please sort out the V 11.1.4 problems as I cant get iTunes to work now. You need to have a new version asap
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
i am not able to hear any sounds of games on the speaker. Though the sounds function on the head fones. The speaker works perfect in other applications except games.Have checked all the settings but not able to fix it.
Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound. Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and its the icon; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085
If that doesn't solve it then try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
My IPad sound keeps turning off. I have checked all the settings nd they are ok. I have to reset it all the time. It is very frustrating as I use it as an alarm, need I say I've waken late a few times.
I'm having the same problem?
-
Hi All,
Strange problem. I have upgraded to OSX 10.9.1 but cant get wifi to work so forced to be hard wired. Any inputs appreciated. Problem is I cant even reinstall it as I saw on a thread reason, it needs wifi to begin.It only needs an internet connection - wired or wireless.
Fixing a Mavericks Installation Problem
How to manage a failed OS X Mavericks installation | MacFixIt - CNET Reviews.
Try these in order:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
after the chime press and hold down the OPTION key until the boot manager screen appears.
Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
hello i have an ipod touch 4 5.1.1 and i can't post status updates or have a profil picture what is the problem and my sister has it and we have the same itunes account in game center
And the answer is:
williamfromlongueuil wrote:
we have the same itunes account in game center
You need to have your own account... DUH.... -
When I send a email, the people get it with my daughters email as the one who sent it. I have checked all the settings ...help
Does your daughters email address show up as one of the options in the From line as discussed above? If so, try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank then power ON again in the normal way.] It is 'appsolutely' safe!
Maybe you are looking for
-
I tried to sync my iPod Touch to my computer and it went through the whole process then at the end gave me the following error message: "Attempting to copy to disk 'iPod Touch' failed. The disk could not be read from or written to." It worked this mo
-
Films in the Cloud now available in UK!!!!
and supposedly in 35 other countries: http://www.macrumors.com/2012/07/19/apple-expands-itunes-movies-in-the-cloud-to- uk-canada-australia-and-new-zealand/ This is a huge step forward for users outside of the US. Only 3 Toy Story movies showed initia
-
Filenames within the Aperture container
I have recently bought Aperture and, having transferred all my photographs into it (>200Gb), I am now trying to move the Aperture library to my file server where I have plenty of storage space. However, when I tried to copy the file to my server whic
-
Switch from PS laser printer to PCL all-in-one
I've been using a Xerox Phaser 4400 for years, and I'm starting to suspect it's on it's last legs. When I purchased it, much of my work went to press as hard copy, so the PS printer (where I could set dot screen properly was important). I also wanted
-
Strange behaviour - any ideas?
Strange behaviour began when i was unable to open a new page in photoshop. The next day i was unable to print from word or photoshop or emails. However i could print from freehand and excel! I used disk 1 to verify and repair disk. this did not solve