Hello. My iPhone 4s when recieving message plays the tone more than once. How to stop that?
It plays the tone more than once and it's not playing the tone fully. It plays like it is "stuck". Like CDs play when they are scratched. How can I stop that?
Pause and off are the same thing. This is how you stop the music.
iPhone User Guide (For iOS 5.0 Software)
Similar Messages
-
Message may be sent more than once
Hi,
When I use mailq, I can read the following error in many emails:
008B354E529F 7265 Tue Jun 30 10:08:19 [email protected]
(delivery temporarily suspended: conversation with server.domain[/var/imap/socket/lmtp] timed out while sending end of data -- message may be sent more than once)
[email protected]
What is happen?
Thanks for all.
Message was edited by: jonflasIt means that Cyrus IMAP is not responding or ready to deliver mail (at least temporarily). Most likely reason is that there are too many connections/users.
-
Timed out while sending ... message may be send more than once
Hi,
I regular have complaints from some clients receiving my emails 10 -15 times in their mailbox.
When checking the maillog I always see : timed out while sending ... message may be send more than once. See below
Problem can happen at any time, even when there is just 1 person connected to the server, so I rule out overload.
95% of mails send arrive without problem.
When looking the dns mx info of these clients I am having problem with, all have multiple (round-robin ?) mx-hosts (eg mx.mailprotect.be).
Is someone else having these problems ?
gr
Fonny
Nov 20 14:05:05 osxserver postfix/smtp[33385]: 3846CBE9FFC7: conversation with monitor.estrel.com[62.154.155.69] timed out while sending end of data -- message may be sent more than once
Nov 20 14:15:48 osxserver postfix/smtp[33385]: 3846CBE9FFC7: to=<[email protected]>, relay=mx-30.startplus.de[62.154.155.70]:25, delay=1826, delays=486/0.01/716/623, dsn=4.4.2, status=deferred (conversation with mx-30.startplus.de[62.154.155.70] timed out while sending end of data -- message may be sent more than once)
Nov 20 14:15:48 osxserver postfix/smtp[33385]: 3846CBE9FFC7: to=<[email protected]>, relay=mx-30.startplus.de[62.154.155.70]:25, delay=1826, delays=486/0.01/716/623, dsn=4.4.2, status=deferred (conversation with mx-30.startplus.de[62.154.155.70] timed out while sending end of data -- message may be sent more than once)
Nov 20 14:27:06 osxserver postfix/smtp[34737]: 6F586BEA0F09: lost connection with mx1.hotmail.com[65.55.92.136] while sending end of data -- message may be sent more than onceIt means that Cyrus IMAP is not responding or ready to deliver mail (at least temporarily). Most likely reason is that there are too many connections/users.
-
When i put an app on m my iphone to show in lock screen it rings more than once
when i put an app on m my iphone to show in lock screen it rings more than once
When I go to settings/ notifications and select an app's notification and select on in the "view in lock screen* the msg tone rings more than once but when I turn it off it ring once.
What should I do to make the msg appears in lock screen but only notify me once -
That pretty much sums it up. I wanted to create some more room on my iPhone, so I went through and deleted every single message. How can they still be taking up nearly 2 Gb of space?
- Have you tried another cable?
- Another USB port?
- When you have the problem, connect it to another computer to help determine if you have an iPod or computer problem.
- Try just restoring the iPod to factory settings/new iPod. Do not restore from backup. If you still have the problem with this and all computer that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
I tried to install a virus scanner, traffic light to see where the problem exists with no luck, any suggestions?
See Thomas's site: http://www.thesafemac.com for help with adware.
Also go to Safari, Preferences, Security and see that you have Block Pop-up Windows checked. -
The same SMS messages are showing more than once
Hi,
On my SMS page, my message threads are showing up more than once ,
How would I go about fixing this?Hello,
Maybe helps you:
*[http://kb.mozillazine.org/Repeatably_downloading_the_same_messages] -
Heading level hierarchy errors when topics are in TOC more than once
I have discovered that the hierarchy in the Heading levels in
the Printed Documentation will differ from than in my online help
table of contents hierarchy, and that the problem is due to topics
that are intentionally in the TOC more than once.
For example, in chapter 5 of a particular help system the
hierarchy should be:
Heading 1 < Chapter 5 title from top-level book>
Heading 2 <title of second level book>
Heading 3 <title of topic that appears under second-level
book>*
What I actually get is:
Heading 1 < Chapter title from top-level book>
Heading 2 <title of second level book>
Heading 4 <title of topic that appears under second-level
book>*
* This same topic appeared in an earlier chapter. In that
chapter it was really at a Heading 4 level.
Due to company styles, etc. we use a numbering system at the
headings and in the TOC, so instead of
5
5.1
5.1.1
I erroneously get
5
5.1
5.1.1.1
This type of hierarchy issue appears multiple times in this
particular document (which I inherited by the way.)
Other than restructuring the document to not reuse topics in
different places in the TOC, is there a solution or a workaround
for this problem?
What I am doing so far, is generating the Print Documentation
one chapter at a time. As long as a topic is not reused with the
same chapter, my hierarchy of heading levels is maintained;
otherwise, it is not. Then I can put the chapters back together
after fixing the few places that still have heading level problems.
This however, will be quite cumbersome as this document is
translated into nine other languages.
I am using RoboHelp X5 for Word / Word 2003 for the source
and most of the translations; RoboHelp Asian Edition, Simplified
Chinese / Word 2003 for the Chinese translation. The heading level
hierarchy error occurs in both versions.>> AF: I've commented in sections...
Without Maintain Heading Levels, RH will apply heading levels
to the books and then the topic levels will get bumped down. So a
top level book will be Heading 1 and the Headings in the topic will
get bumped down to 2, 3 and 4 etc. If then you have another book
one level down so that it gets Heading 2 applied, the same topic
but under the level two book would then get 3, 4 and 5 applied.
That is not the original problem but hopefully we are agreed
that is how things work on that.
>> Yes - that is the expected behavior. When it didn't
happen as expected, that's what led me to the discovery of the
cause of the problem (topic reuse).
Your problem was that firstly Heading 3 got bumped to Heading
4 if the same topic was inserted into the TOC twice. I assume it
was OK in the first instance, or is it that when you add it twice
it goes wrong everywhere?
>> Your assumption is correct. First occurrence is
correct. Second, third, and fourth (yes - there is one topic that
is used 4 times! ) are not correct based on TOC hierarchy.
On the numbering, nothing surprises me. If you look at my
site you will see that for RH HTML, i gave up on getting it right.
I have had many queries on this and more than a few people have
indicated they will work on the problem and get it working. I'm
still waiting. There are many posts about outline numbering
problems. Has anyone got it working satisfactorily?
>> I don't really have numbering problems. The
numbering is following the RoboHelp-generated hierarchy and the
.dot template that I apply. It's just that the RH-generated
hierarchy and its heading levels don't correspond to the "real"
hierarchy because of the reuse issue.
I have seen various Word gurus maintain that numbering has
not worked entirely satisfactorily since Word 2! Also enough posts
to convince me this is a Word issue, not a RH issue.
If you want to create a new project and knock something up
that demonstrates this problem, by all means zip it up and send it.
I'll assume it will be a small project and zip to less than 5mb. If
more, contact me first.
>> Unless you have RoboHelp X3 Asian Edition,
Simplified Chinese, there is really no need. I plan to either avoid
the reuse issue in the source, or build the print doc in sections
which is easy enough in RoboHelp X5 for the non-Chinese languages.
It is in the older Asian edition where the problems are compounded
by the omitted reuse topics. If you do have RoboHelp X3 Asian
Edition, Simplified Chinese and want to experiment, I can send you
a cut-down version of the project. Don't feel obligated though;
unless you can read Chinese (I can't) it is very tedious to work
with. -
While making a backup copy in Itunes of my Iphone I receive the following error message: While making a backup copy of this iPhone (-35) an error has occurred. Do you want to continue with altering this Iphone? When you continue al the material on this Iphone will be lost.
I reinstalled iTunes but that dit not help. After synching iTunes with my iPhone it also asks to authorize my pc and when i Click on ok, it says it is already authorized.
Please can somebody help me, so I can make backup.
Greetz,
DerkIt's likely that your backup is corrupt. Try deleting the backup, then right click on the name of the phone in iTunes and choose "back up". To delete go to iTunes Preferences, Devices tab. Highlight and delete the most recent backup. Note that sometimes deleting this way leaves some garbage around that can still interfere with a new backup, so you should verify that the backup folder is empty.
from: http://support.apple.com/kb/HT4946
The folder where your backup data are stored varies depending on the computer's operating system. Make sure the backup folder is included in your periodic data-backup routine.
iTunes places the backup files in the following places:
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Note: To quickly access the Application Data folder, click Start, and choose Run. Type %appdata% and click OK.
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
Note: To quickly access the AppData folder, click Start. In the search bar, type %appdata% and press the Return key. -
I have an Iphone $S, when I am on the phone and I get a new message my phone vibrates and rings, How can I stop this from happneing when I am on the phone
Flip the Ring/Silent switch. Make sure Vibrate when silent is off in Settings>Sound.
-
Does anyone have an issue with your iPhone 5 when trying to play music? Mine won't, on the screen you see the player run through songs very quickly but never playing.... Help!
Try this > Start a song, tap the screen, under the left side of the scrubberbar that appears, tap the icon to stop shuffle.
-
Hello, well the other day i bought Angry birds with an Add " mighty eagle", and i had to reset my iphone and when i re-install the app Angry birds i dont have the add and i dont know how to get it back some1 can help me!?
Se if this helps:
iTunes Store: About In-App Purchases
Do you have a backup to restore from that would have included that in-app purchase? -
Hello guy, i have a problem when playing the FL commando which when i am playing the game , sudden the game is log out by itself. I would like to know what is the problem for my ipod 4g, just buy recently only and having ios 5.0.1
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
My Iphone5 updated today with new iOS 6.1 and while doing that it has sync my phone number with my wife number in the same icloud due to which we receive each others SMS when we message each other. Anyone have idea how can I fix this issue in settings etc
Thank youMy Iphone5 updated today with new iOS 6.1 and while doing that it has sync my phone number with my wife number in the same icloud due to which we receive each others SMS when we message each other. Anyone have idea how can I fix this issue in settings etc
Thank you -
'An unknown error occurred when trying to play the...
Hello,
I have had a BT Vision package for a few months but we recently moved house and wanted to transfer our services. Since moving in, we have got the telephone, internet and TV channels working however we are struggling with the additional TV services (i.e. catch up, recording, on demand).
Everytime we try to play something on catch up or via on demand, or try to play a recorded programme, it attempts to load but then the following error message appears at the bottom of the screen in a red box - 'An unknown error occurred when trying to play the video OutputProtectionEnableFailed'
I have phoned BT's technical department on several occasions who have not been able to resolve the issue. I have tried Googling this error message and searching BT's website however I cannot find any comments about this error. BT have offered to send a technician out however will automatically charge £99 if this is an error with the cable rather than the BT box. This is a lot of money and I am not able to risk this potential charge when I'm not sure what the problem might be.
If anyone know's what might be causing this , or has had the same error message themselves, I would be very grateful to know.
Many thanks,
SHydeSounds as though you may have an account not properly set up. Drop the Mods a note and they can check what's going on with your account
Life | 1967 Plus Radio | 1000 Classical Hits | Kafka's World
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Helpful Post?
If a post has been helpful, say thanks by clicking the ratings star.
Maybe you are looking for
-
Multiple languges used while uploading a file using java appn
Hi everybody, i have a problem with multiple languages , let me clear you the question, i were developing a java application using spring ,hibernate frame works, so i got a problem while uploading a file with chinees language or other it was saving w
-
How can I change column name in ALV table in WebDynpro ABAP?
Hi Everyone, I have created an ALV table in WebDynpro ABAP. I have created a context node and added the required attributes there - for the ALV display. Now I want to change one columnn name of the ALV table.... Currently it is showing the descriptio
-
Can't open Pages 08 document in Pages 09?!
I,ve created a document in Pages 08 on my Imac. When I'm trying to open that document in my Ipad (which has Pages 09) I get a message saying I can't open a document created in Pages 08 in Pages 09. Is that really correct or is there any way around th
-
On my new iMac, I have iWeb 2.0.3 Can anyone tell me if that is the most current version? and if iWeb 08 is newer, different and better,, is it worth spending another $79 for another iLife? I also tried to download the iWeb 08 Manual from the downloa
-
Could not create Java class: associated with region:
Hi All, I am extending the standard controller oracle.apps.pos.supplier.webui.SuppSummCO With a custom controller xxmycomp.oracle.apps.pos.supplier.webui.XXSuppSummCO I have built the project in my local JDEV, Compiled the custom controller and put i