Help !! a link error

when I link my application to an lib. the following link error occurs:
Undefined first referenced
symbol in file
__RTTI__1CpknKDT_TSymbol4nJRWCString___ /am/lib/sun4.solaris2.9/libDV.so
How can I get the information about the symbols in a lib?
I'm not sure where the symbol __RTTI__1CpknKDT_TSymbol4nJRWCString is defined?

I see that this forum software deleted the stuff in angle brackets in my original answer. The missing RTTI symbol refers to const DT_TSymbol< RWCString >* That is, a pointer to template class DT_TSymbol instantiated on type RWCString.
The missing symbol is a data object generated by the compiler. Since the data object is referenced in each shared library, it should be contained in each shared library.
The RTTI data is missing, and there are at least two reasons why that might be so.
1. The library was not built correctly; a necessary object file was omitted. That missing object file would have contained the RTTI data.
2. The library was built with a compiler that neglected to emit the RTTI object (a compiler bug).
Determining which is the case is beyond the scope of what we can do in this forum.
A place to start is to have whoever built those libraries add the option "-z defs" to the CC command line that was used to create each shared library. They will see linker error messages about all the needed symbols that are missing. That's a starting point for tracking down why they are missing.
In general, shared libraries should be built with "-z defs" so that the creator of the library finds out about missing symbols instead of inflicting the pain on clients of the library.

Similar Messages

An error encounter on test devise (real devise) i.e "apple mach -o linker error linker command failed with exit code 1", please any body help me to solve the problem

Hello, I am using tesseract api in my app, which run perfectly on simulator but on test devise (real devise) it is showing an error i.e "apple mach -o linker error linker command failed with exit code 1", please any body help me to solve the problem

if you can't compile the webutil.pll in your forms developer you need to set the forms_builder_classpath in you windows registry. You have to add the frmwebutil.jar,jacob.jar to the registry key. The configuration files you mention are for running the forms.

Help~ Link error in pro*c (10g EE for win32)

Hi Sir,
I have downloaded the 10g EE database from ORACLE homepage...
There are orasql10.lib (in /precomp/lib) and orasqx10.lib ( in /precomp/lib/msvc).
I linked the both of them, but there is link error..as follows..
-----------------------------------------------------------------------------------------------------------insertTest.obj : error LNK2001: unresolved external symbol "void __cdecl sqlcxt(void * *,unsigned int *,struct sqlexd *,struct sqlcxp const *)" (?sqlcxt@@YAXPAPAXPAIPAUsqlexd@@PBUsqlcxp@@@Z)
../../../bin/insertTest.exe : fatal error LNK1120: 1 unresolved externals
Error executing link.exe.
source code is very simple
void main()
EXEC SQL include sqlca;
EXEC SQL BEGIN DECLARE SECTION;
char *uid="sys";
char *pwd="manager0";
EXEC SQL END DECLARE SECTION;
EXEC SQL CONNECT :uid IDENTIFIED BY :pwd;
printf("\nConnected to ORACLE as user: %s\n", uid);
exit(EXIT_SUCCESS);
Help me~~
Thank you...

Works for me. Please post complete step-by-step log of the commands you executed, like below:
C:\>type test.pc
#define EXIT_SUCCESS 0
#include <stdio.h>
EXEC SQL INCLUDE SQLCA;
void main()
    EXEC SQL BEGIN DECLARE SECTION;
    char *uid="/";
    char *pwd="";
    EXEC SQL END DECLARE SECTION;
    EXEC SQL CONNECT :uid IDENTIFIED BY :pwd;
    printf("\nConnected to ORACLE as user: %s\n", uid);
    exit(EXIT_SUCCESS);
C:\>
C:\>proc test.pc
Pro*C/C++: Release 10.2.0.1.0 - Production on Thu Mar 9 08:23:49 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
System default option values taken from: C:\oracle\ORA10GR2\precomp\admin\pcscfg.cfg
C:\>cl test.c c:\oracle\ORA10GR2\precomp\lib\orasql10.lib
Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 13.10.3077 for 80x86
Copyright (C) Microsoft Corporation 1984-2002. All rights reserved.
test.c
Microsoft (R) Incremental Linker Version 7.10.3077
Copyright (C) Microsoft Corporation. All rights reserved.
/out:test.exe
test.obj
c:\oracle\ORA10GR2\precomp\lib\orasql10.lib
C:\>.\test.exe
Connected to ORACLE as user: /
C:\>

My external hard drive won't mount and shows a 'sibling link error'. I've seached the forums but need a very dumbed down set of tips for the computer illiterate- help?

The forums have suggestions on this topic but I don't understand the lingo used.

Remember card catalogs in libraries? The computer has its own card catalog that tells it where all the files are. That's known as the directory.
Sibling link error indicates something is wrong with one of the cards, making the computer lost. Now the computer will put forth a bunch of gobbledy gook to fix this error, but you can do it.
Since the issue is with the external hard disk, you must select it with Disk Utility's First Aid selected. There you will repair the disk. If it can't repair the disk, you will need to use a more powerful tool. The question is, is your data backed up elsewhere, or is it not? If it is not, the same symptoms of a bad directory can also implicate a dying hard drive. You'll want a data recovery tool if you aren't backed up. If you are backed up, and there is nothing that can't be replaced on that external hard drive, get Alsoft Disk Warrior. This should fix most bad sibling link errors repair disk can't. When it can't, you can give up on the external hard disk.
P.S. Permissions has NOTHING to do with the directory. Do not worry about issues with permissions or attempting to repair it at this stage.

Linker Error during compiling ODBC WinCE C++_Sample Project

I am devloping a ODBC application for PocketPC2003 using OLite 10g Release 10.3.0.2. before that i am understanding the sample application provided with Olite.
I followed all the instructions provided in ReadMe.txt file available before using VC++ sample. After making all the settings and compiling i am getting following linker errors as mentioned below.
Any solution for this problem at the earliest will be appreciated, i have tried link all the libraries provided with WinCE armv4.
Linker Error Messages:
Error     1     error LNK2019: unresolved external symbol SQLExecDirect referenced in function "public: virtual __cdecl CSQLResult::~CSQLResult(void)" (??1CSQLResult@@UAA@XZ)     dbaccess.obj
Error     2     error LNK2019: unresolved external symbol SQLFreeStmt referenced in function "public: virtual __cdecl CSQLResult::~CSQLResult(void)" (??1CSQLResult@@UAA@XZ)     dbaccess.obj
Error     3     error LNK2019: unresolved external symbol SQLGetData referenced in function "public: class CRowObj const * __cdecl CSQLResult::Fetch(int)" (?Fetch@CSQLResult@@QAAPBVCRowObj@@H@Z)     dbaccess.obj
Error     4     error LNK2019: unresolved external symbol SQLFetch referenced in function "public: class CRowObj const * __cdecl CSQLResult::Fetch(int)" (?Fetch@CSQLResult@@QAAPBVCRowObj@@H@Z)     dbaccess.obj
Error     5     error LNK2019: unresolved external symbol SQLFreeEnv referenced in function "public: void __cdecl COLiteDB::Disconnect(void)" (?Disconnect@COLiteDB@@QAAXXZ)     dbaccess.obj
Error     6     error LNK2019: unresolved external symbol SQLFreeConnect referenced in function "public: void __cdecl COLiteDB::Disconnect(void)" (?Disconnect@COLiteDB@@QAAXXZ)     dbaccess.obj
Error     7     error LNK2019: unresolved external symbol SQLDisconnect referenced in function "public: void __cdecl COLiteDB::Disconnect(void)" (?Disconnect@COLiteDB@@QAAXXZ)     dbaccess.obj
Error     8     error LNK2019: unresolved external symbol SQLConnect referenced in function "public: int __cdecl COLiteDB::Connect(void)" (?Connect@COLiteDB@@QAAHXZ)     dbaccess.obj
Error     9     error LNK2019: unresolved external symbol SQLAllocConnect referenced in function "public: int __cdecl COLiteDB::Connect(void)" (?Connect@COLiteDB@@QAAHXZ)     dbaccess.obj
Error     10     error LNK2019: unresolved external symbol SQLAllocEnv referenced in function "public: int __cdecl COLiteDB::Connect(void)" (?Connect@COLiteDB@@QAAHXZ)     dbaccess.obj
Error     11     error LNK2019: unresolved external symbol SQLError referenced in function "public: class CSQLResult * __cdecl COLiteDB::Execute(wchar_t const *)" (?Execute@COLiteDB@@QAAPAVCSQLResult@@PB_W@Z)     dbaccess.obj
Error     12     error LNK2019: unresolved external symbol SQLDescribeCol referenced in function "public: class CSQLResult * __cdecl COLiteDB::Execute(wchar_t const *)" (?Execute@COLiteDB@@QAAPAVCSQLResult@@PB_W@Z)     dbaccess.obj
Error     13     error LNK2019: unresolved external symbol SQLNumResultCols referenced in function "public: class CSQLResult * __cdecl COLiteDB::Execute(wchar_t const *)" (?Execute@COLiteDB@@QAAPAVCSQLResult@@PB_W@Z)     dbaccess.obj
Error     14     error LNK2019: unresolved external symbol SQLAllocStmt referenced in function "public: class CSQLResult * __cdecl COLiteDB::Execute(wchar_t const *)" (?Execute@COLiteDB@@QAAPAVCSQLResult@@PB_W@Z)     dbaccess.obj

Hi,
The OLITE forum (Database Mobile Server (inc. legacy Database Lite) would be a better place to post your issue. This forum deals with the ODBC driver that connects to a "normal" Oracle database.
Hope it helps,
Greg
Edited by: gdarling on Nov 12, 2008 8:31 AM

The broken link error

Hi,
Please help me with this broken link error in Office Excel 2010. Thank you.
The problem is: a broken link cannot be removed from the file. The link was used in data validation, which refers to a list of values. After the path was corrected, it still shows there’s a broken link. Here are the details:
I have 4 files named “000TVA_Test – 3”, “000TVA_Test – 4”, “000TVA_Test – 5”, and “000TVA_Test – 6”. The posterior files were developed based on the previous files.
In Test-3, sheet “Template “, cell “L4”, “O4”, “R4”… were built as dropdown list using data validation. The list source is in the “Library” worksheet. There’s no problem so far.
Test-4 was firstly copied from Test-3. In this file I renamed the worksheet from “Library” to “Setting” and the link was broken from here. I can also fix the broken link in this file. (While I didn’t realize there was a broken link.)
In Test-5 I fixed the path, but every time when opening the file, the broken link still shows.
In Test-6 I’ve removed the data validations. The broken link is still there.
I tried to find solutions online. I tried common methods, cannot find anything in the files is still using links. I also tried the “findlink.xla” add-in, but it only worked for Test-4, and couldn’t find the link in other files.
Please help. Thank you!
I uploaded files here: https://onedrive.live.com/redir?resid=1A97736E0ABBAA41!113&authkey=!AF5wAd9rwUPnYyE&ithint=folder%2cxlsm
Thanks again!

Hi,
Based on my tested the files downloaded, I found that Test-5 & Test-6 included the "A defined name that refers to an external workbook", Test-4 had not. (Please click Formula Tab>Name Manage, you'll see them.)
However, the Break Links command cannot break the following types of links:
A defined name that refers to an external workbook
A ListBox control with an input range that refers to an external workbook.
A DropDown control with an input range that refers to an external workbook.
http://support2.microsoft.com/kb/291984/en-us (It also applies to Excel 2010)
Thus, we'd better try the workaround： re-build the Test-5 & Test 6.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Invalid sibling link error

I have a 15" PB which gave an "invalid sibling link error" one month ago and I was not able to even repair it using DiskWarrior. I have Apple Care Protection plan, so I sent it for repairs and the repair guys replaced the motherboard as they suspected it was the reason. On return, I reformatted the HD and installed everything from stratch. Everything was working fine till last Saturday morning, when computer would not boot up. So I checked using Disk Utility from PB DVD, and the dreaded "invalid sibling error" came up again. Since I have a bootable backup of the HD, I formatted the HD and tried to load the system on the HD from the backup copy. But the writing of backup using CCC hung up and I had to quit it. After that I was not able to find the HD using Disk Utility from DVD.
I have sent it for repairs again, but can anyone help me understand the core problem here. Since last time they replaced the motherboard, I think they will replace the HD this time around. Is the logic board, motherboard or the HD that is the root cause of the problem?
Powerbook G4 Mac OS X (10.4.7) 100GB HDD, 1.5GB RAM

I had never heard of "invalid sibling link error" until you post, and when I ran a search on it the best explanation I could find is that it is a directory-related problem. See the following (assuming it is correct): http://www.computing.net/mac/wwwboard/forum/2584.html The suggestion there, though, is that DIsk Warrior should be able to fix the problem, and you've already told us that you tried using Disk Warrior on it and it did not work.
Very puzzling. Please post back what happens when you get your PB back from being repaired.
Good luck.
-- JDee

Linking errors when using ibsta

Hello,
I have been trying to write C code to automate a Keithley 2410 through GPIB. I am using Windows XP 32-bit, and VC++.
I believe I was successful in getting a handle to the gpib-32.dll. However, I am getting a linking error when I try to use ibsta: 1>helloworld.obj : error LNK2001: unresolved external symbol _ibsta
1>C:\Documents and Settings\Prober\My Documents\C Programs\helloworld\Debug\helloworld.exe : fatal error LNK1120: 1 unresolved externals
However, when I look through the ni488.h, I see that ibsta is a global variable. Therefore I am confused as to why I am getting a linking error
I am following this guide: http://na.tm.agilent.com/pna/help/latest/Programming/GPIB_Example_Programs/GPIB_using_Visual_C++.htm
My code is attached
Attachments:
code.c ‏3 KB

Check out the 4882query.c example located on your computer at National Instruments > NI-488.2 > Examples > Standard C > 4882query. The National Instruments folder might be in a sub-folder of Public or Public Documents. Look at the ReadMe.txt file first. It contains a C++ section. Then try compiling the example and see what happens.
Jeff Munn
Applications Engineer
National Instruments

Re: Link error during fcompile

Hi Jeanne:
I have already gone trough the procedure you have described but the
result is same.
When I invoke link command on all the *.obj files with some libraries
from forte and
MSVC/Lib I get the same Error. The command I am invoking is
C:\> link *.obj *.lib
Assuming that I am in the dir where all .obj files are and I have copied
all required .lib files in this dir. Other thing that I have also tried
this with different link flags and/or with exact flags from Forte log
file.
Thanks for your respons.
Any othe suggestions please?
--Shahzad
Jeanne Hesler wrote:
Shahzad,
Have you tried manually invoking the link command itself from the
command
line? I was able to do this successfully when having problems with
the
Borland compiler under 16-bit windows. It is not a long-term
solution,
because you obviously want fcompile to handle the entire task, but it
might
help you determine if it is a problem with the fcompile or the linker
itself.
I executed the fcompile from a DOS window in the ...codegen\myapp
directory. When the error occurred, I found the log file that is
created
from the fcompile, and determined the last command that was executed.
I
can't tell you the exact specifics here, because I have not had
problems
with fcompile using the MSVC compiler. But I am assuming that Forte
is
consistent about writing the compiler output to a log file. I could
then
copy the command line from the log file to the command line in the dos
window and execute it manually.
You have to be careful copying the command line, because there are a
lot of
flags, and they ARE case-sensitive. If you get the same error when
invoking the command manually, then you can assume that the problem is
with
the compiler itself, or as it was in my case, with the compiler
setup. If
the command is successful when you execute it manually, then you can
pursue
it as a problem with the fcompile.
One other thought -- you might make sure that you have plenty of extra
disk
space. Compilers like to write temporary files during the compile
process.
On a very large compile, you might need a lot of working space for
these
temporary files. I believe the MSVC compiler writes these files to
the
directory indicated by the environment variable TMP (not TEMP).
Hope this helps,
At 11:22 AM 10/17/97 -0400, you wrote:
Hi,
I am getting this error during fcompile of a large (12MB) pgffile
link: fatal error LNK1141: failure during build of exportes file
error during compilation, aborting
This is under Windows NT and MSVC compiler. MSVC Documetation saysthat
this could be due
to insufficient memory. But we have 0.5Geg ram and I don't even seeall
memory being utilized during compile.
Any clues?
--Shahzad
--Jeanne
============================================================
Jeanne Hesler [email protected]
============================================================

The way to handle this is to break down the fcompile. Here is the
process:
1. fcompile -nocompile -fm "(x:40000)"
this will produce the CPP and H files
2. fcompile -nogen -fm "(x:40000)"
this will link the files and produce the exe.
If there is an error then you will know exactly where its happening.
Hope this helps.
Kamran Amin
Technical Leader, Software Engineering
Oxford Health Plan
http://www.oxhp.com/
From: Chaudary M. Shahzad[SMTP:[email protected]]
Sent: Friday, October 17, 1997 7:05 PM
To: [email protected]
Subject: Re: Link error during fcompile
Bruce:
I have tried that I have even tried
fcompile -fm '(x:400000)'
It seems like its the Microsoft Compiler and/or Linker problem. There
have to be some flags for compiler or linker I can
set with fcomile so it allocate more memory for the MSVC linker.
Any more clues or help ????
--Shahzad
Bruce Lipson wrote:
Chaudary,
There are flags for setting the usage of memory by the fcompile
command.
fcompile -fm '(x:250000)'
where x:250000 sets the maximum amount of memory fcompile will use to
250k.
the default is 64k.
Get it a try.
Bruce Lipson
[email protected]
-----Original Message-----
From: Chaudary Shahzad [SMTP:[email protected]]
Sent: Friday, October 17, 1997 11:22 AM
To: [email protected]
Subject: Link error during fcompile
Hi,
I am getting this error during fcompile of a large (12MB) pgf
file
link: fatal error LNK1141: failure during build of exportes file
error during compilation, aborting
This is under Windows NT and MSVC compiler. MSVC Documetation says
that
this could be due
to insufficient memory. But we have 0.5Geg ram and I don't even see
all
memory being utilized during compile.
Any clues?
--Shahzad

Broken link error message

I get an error message whenever I click "help with this widget." It tells me that the link (to Adobe help??) is broken and that I must send an email. But it doesn't tell me where to send the email, or to whom. I desperately need help with this widget and am frustrated by the broken link.

From: Nancy O.
Sent: Thursday, January 31, 2013 5:33 PM
To: CeliaThaxter
Subject: Broken link error message
Re: Broken link error message
created by Nancy O. in Dreamweaver - View the full discussion

Sibling Link Errors

i recently purchased the Mac Pro which i connected through ethernet to my older Power Mac G4 MDD Dual 1GHZ.
i discovered last week that my Mac Pro reported an error in Disk Utility "Invalid Sibling Link" and that app could not repair the problem. i purchased Disk Warrior 4.0 and installed OS X on another internal drive (i have four connected internally) and successfully repaired the disk. On a lark, i checked the Power Mac G4 and found that it also reported errors which could not be repaired by Disk Utility, but it did not report the "Invalid Sibling Link Error." Disk Warrior failed to repair the disk (and i am waiting for the CD to arrive in the mail to start up from it to try again, reporting that it encountered two overlapped filed on the disk).
This week i ran Disk Utility to find that again, my Mac Pro reported the "Invalid Sibling Link" error. i have searched the web and have a basic understanding of what the error is, and many people have experienced the problem. It appears that the error could lead to the start up disk failing to mount, etc. However, i have not experienced any problems with my drive that have been noticeable to me.
My question is what could be causing me to have this repeated error? Does this indicate an actual hard drive failure? Is there a Mac virus that could cause this? Could it be caused by transfering files over the network or through Apple Remote Desktop?
Any discussion on this would be helpful. Thanks folks.
MacPro Dual-Core 3 Ghz Mac OS X (10.4.9) ATi X1900 XT, NVIDIA GeForce 7300, 5GB RAM, 2.8TB, 20" DEll LCD, 2xViewSonic 17"

Which drive gets the error out of all installed, and
where is it located as far as file name etc. I'm
wondering if it could happen using an application
like FCP or CS2 running under Rosetta. Might want to
map it out and try and isolate it that way. I'd also
look for any hardware issues you can find for that
model of hard drive e.g. failures, etc. My two
cents.
Michael
It is the Startup Drive that gets the error on my Mac Pro (the preinstalled drive that came with the Mac), and the start up drive on the MDD G4. The MDD G4 had two files that were cross linked (a Civ file and an iTunes Temp file) that i had to manually delete before Disk Warrior could repair the drive. On the Mac Pro i have used Photoshop CS (1?) a little, but not to any large degree, other than that, i have used Apple's Pages, Safari, and Office... but nothing task intensive.
i ran Apple's Hardware test which appears to check RAM and the Logic Board and both checked out fine. i used both Disk Warrior and Drive Genius, both report that the S.M.A.R.T. status of the drive is verified and the drive is working properly.
i am curious if Apple Remote Desktop could cause the error? i frequently copy files from one computer to the other... but i can't fathom why or how this would be the case. But it has to be something, else why get this error twice in the space of a week?
i had not considered Tiger Cache Cleaner... i will check that out, but again, i don't know if this will tell me WHAT is going on and WHY it is happening.

Build Collada DOM 2.2 in X-Code and got _unZOpen, Close a link errors

I am trying to build Collada DOM 2.2 in XCode and getting following link error.
Collada DOM is providing minizip (library) which contains zip.h and unzip.h, which is called after calling mac libraries; Is any way I can specify in XCode project build specifications to read minizip from Collada first?
Building target “viewer” of project “viewer” with configuration “Debug” — (8 errors)
"_unzGoToNextFile", referenced from:
daeZAEUncompressHandler::extractArchive(void*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > const&)in libdom.a(daeZAEUncompressHandler.o)
"_unzGetCurrentFileInfo", referenced from:
daeZAEUncompressHandler::extractFile(void*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > const&)in libdom.a(daeZAEUncompressHandler.o)
"_unzCloseCurrentFile", referenced from:
daeZAEUncompressHandler::extractFile(void*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > const&)in libdom.a(daeZAEUncompressHandler.o)
"_unzOpenCurrentFile", referenced from:
daeZAEUncompressHandler::extractFile(void*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > const&)in libdom.a(daeZAEUncompressHandler.o)
"_unzReadCurrentFile", referenced from:
daeZAEUncompressHandler::extractFile(void*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > const&)in libdom.a(daeZAEUncompressHandler.o)
"_unzGetGlobalInfo", referenced from:
daeZAEUncompressHandler::extractArchive(void*, std::basic_string<char, std::char_traits<char>, std::allocator<char> > const&)in libdom.a(daeZAEUncompressHandler.o)
"_unzClose", referenced from:
daeZAEUncompressHandler::~daeZAEUncompressHandler()in libdom.a(daeZAEUncompressHandler.o)
"_unzOpen", referenced from:
daeZAEUncompressHandler::daeZAEUncompressHandler(daeURI const&)in libdom.a(daeZAEUncompressHandler.o)
Your help greatly appreciated.
Thanks

Please look into following link
https://sourceforge.net/forum/forum.php?threadid=2643729&forumid=531263

Excelreportdemo project link error with CVI2010 on windows 7, 64-bit operating system

I am trying to run the excelreportdemo project in CVI2010 on windows 7, 64-bit operating system. I have the Excel2013 installed as well. I have chosen the build configuration as release or debug for 32 bit system so to be compatible for the test platform for production.
However, I get 12 Project link errors as following:
Undefined symbol '_ExcelRpt_RangeBorder@24' referenced in "excelreportdemo.c".
Undefined symbol '_ExcelRpt_WriteDataFromTableControl@16' referenced in "excelreportdemo.c".
Undefined symbol '_ExcelRpt_SetCellValue' referenced in "excelreportdemo.c".
Undefined symbol '_ExcelRpt_SetCellRangeAttribute' referenced in "excelreportdemo.c".
Undefined symbol '_ExcelRpt_ChartAddtoWorksheet@40' referenced in "excelreportdemo.c".
Undefined symbol '_ExcelRpt_ChartWizard@52' referenced in "excelreportdemo.c".
Undefined symbol '_ExcelRpt_SetChartAttribute' referenced in "excelreportdemo.c".
Undefined symbol '_ExcelRpt_WorkbookNew@8' referenced in "excelreportdemo.c".
Undefined symbol '_ExcelRpt_ApplicationNew@8' referenced in "excelreportdemo.c".
Undefined symbol '_ExcelRpt_ApplicationQuit@4' referenced in "excelreportdemo.c".
Undefined symbol '_ExcelRpt_WorkbookClose@8' referenced in "excelreportdemo.c".
Undefined symbol '_ExcelRpt_WorksheetNew@12' referenced in "excelreportdemo.c".
I have found a previous dicussion back in 2007. Unfortunately it did not help for the same problem on my new machine and CVI2010. Could anyone give me help on this/
Thanks!
Yuwei
Solved!
Go to Solution.

The previous discussion link is pasted below:
http://forums.ni.com/t5/LabWindows-CVI/Problems-adding-the-activex-instrument-experiencing-undefined/m-p/580608/highlight/true#M31390
It did not solve my problem, but may spark your idea of helping me.
Thanks a lot!
Yuwei

Error when installing Product: BlackBerry Link -- Error 1920.

Hi I get the following installation error for Link:
Product: BlackBerry Link -- Error 1920.Service BlackBerry Link Communication Manager (RIM Tunnel Service) failed to start. Verify that you have sufficient privileges to start system services.
I get the option to retry but it won't work.
Logged on as Admin
Windows 7
BB Z10 10.0.10.85
Tried downloading from the Web and installing and connecting phone to PC. Turned off UAC.

Hey pcamp227,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
Do you have any current security software on the PC? If so what kind? Also go into Start>Control Panel>Adminstrative Tools>Services and is BlackBerry Link Communication Manager listed? If so, click on start the service (make sure you're logged in as the admin).
Once completed then try to access BlackBerry Link.
Let me know if the issue still persists.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

CS3 Linking Error

In CS3, when I open a previously save .ai file I receive
an error which states, "An error occurred trying to
read the linked file [insert file name]. Choose Repair
to locate the missing file, Replace to select another
file, or Ignore to leave the link unchanged." Regardless
of which one I pick, it simply reopens the same error
window and asks me to do the same thing again. All
image files are CYMK formated PSD files and located in
the same folder as the Illustrator file. I am running
CS3 on Windows 8. Can anyone help? I am beyond frus-
trated. Thanks.

Ian, Thanks. That did solve the K2Vector problems.
Are you aware of which .tpp covers the PMMatrix class? That would probably make this linking error:
Convert.obj : error LNK2019: unresolved external symbol "__declspec(dllimport) public: class PMReal __thiscall PMMatrix::operator[](int)const " (__imp_??APMMatrix@@QBE?AVPMReal@@H@Z) referenced in function "class Ipg3::Matrix __cdecl ConvertMatrix(class PMMatrix const &)" (?ConvertMatrix@@YA?AVMatrix@Ipg3@@ABVPMMatrix@@@Z)

Help !! a link error

Similar Messages

Maybe you are looking for