HELP! Blurring text/logo creates visible border

Hi,
I have a video that has some unnecessary text that appears several times while the video is playing.
I tried to blur (censor) the text using the 'Eight-Point garbage matte', 'Gaussian blur', 'Mosaic'.
Also tried 'Track Matte key' with other blur effects. Also tried changing the blend mode.
The problem is, it creates a clearly visible white border around the blurred portion and it doesn't look nice.
And the border is more visible when a bright video is running behind it as seen in the below screenshots.
Any advice to get rid of this problem would be greatly appreciated. Thanks.

Garbage matt + blur is likely your best bet. Results will not be great.
If Premiere had better feathering tools for sculpted layers\tracks, it might look nicer. If your created a .psd in Photoshop, with a feathered alpha channel matte shaped to obscure the text, a track matte could work best if you understand how to employ it.

Similar Messages

Help! Text Outline Creates Broken Stroke

Hi all, thank you ahead of time, newbie here so go easy.
I just upgraded from CS3 to CS5 and I have run into a problem that I cannot find an answer to.
I am trying to send something to the printers, and normally this would work (I think, unless I'm having some brain fart or something). I type some text, "Create Outlines," but when I go to add a stroke to the new outlined text, it creates it all wrong. If you're familiar with Illustrator, it looks like the paths are all screwed up or something.
Did something change in the way I have to do this between CS3 and CS5? I tried a new document, but same problem. Attached is what it looks like.
Thank you again!

If the stroke is a design decision to make 'hollow' text, consider this, too:
Live text appears different from the oulined text when a stroke is applied.
In the screenshot, both samples have a stroke applied and a [paper] fill.
The first one looks much better, IMO.
If you have to outline the text, you will see better results if the outline is part of the export settings instead of part of the design.
Also, if there are any text edits requried later, the outlined text would have to be recreated. The live text is simply edited and exported again.
The oddball stroke is likely the result of a combination of the stroke size, the font size and the glyph shape. My sample above is Myriad Pro Bold at 36 pt with a Tracking of +100 applied.
-mt

Is it possible, automatically, to create a border when a text is inserted.

Is it possible, automatically, to create a border when a text is inserted.
Example:
List with subjects is:
Name:
address:
etcetera...
When the first subject (Name) is typed then a border will appear around the whole text
Is this possible in Indesgn?
Hans

No. Indesign can't draw borders around text during an interaction. You can either set a border for a text frame or draw an unfilled rectangle around text, which then is an overlaying object, but this can't be automated.
For an interactive PDF with forms, you can assign actions to a form field, but none to make a frame visible, a frame that would surround the text or show a border on one side.

How do you create a border around text?

how do you create a border around text?

Can you be a little more specific about what you are trying to do and the application that you want to use? The methods can vary depending on the application and who published it. For instance, if you're using Final Cut Pro here is a discussion describing how the border can be created.
https://discussions.apple.com/thread/1470384?start=15&tstart=0
If you are using an Apple branded application you can also post in the specific forums for those applications in order to help ensure a complete response.
https://discussions.apple.com/community/ilife
https://discussions.apple.com/community/iwork
https://discussions.apple.com/community/professional_applications

Help Please - having difficulties creating af link from the text to an attached file i acrobat

I have been reading the help, but it just wonn't work when I try.
I have tried as followed (I am working with a danish version, and hope to matched the same word as in the english version of Acrobat Xpro):
1. From the toolbox i choose content and then 'hyperlink'
2. I mark the text from which i wish to make a link
3. Acrobat respond with an popup picture 'create a link'
4. From the popup I mark 'Open a side' and push 'next'
5. Acrobat respond with a new popup picture 'create / go to a side'
6. I go to the navigator and open the list with attached file's that I have embedded in my acrobat file.
7. I mark the to which i wish to make a link to
8. In the popup 'create / go to a side' that stilll is open, i push 'Mark hyperlink'
Then I hoped that I have created a link from the acrobat text to the attached file. In stead Acrobat has made a link to the same sidenumber that respond to the text from which i wish to make a link . F.ex. the linktext is on side 10 - then the link goes to side 10.
How do i do it right?
Please help.

Hello Bernd
Thanks for a quick respond.
This corresponds to the text I have tried myself, but apparently I do something wrong
1.      Open a PDF that contains a PDF file attachment – done
2.      Go to where you want to create a link. If that location is in the file attachment, click the Attachments button in the navigation pane, select the file attachment, and click open.
Here I go to side number 10 from which I wish to make a link from (I am not open the attachment file at this moment, as the location not is inside the file attachment).
(I earlier also tried to mark the attachment file and click open, and It result that the attached file just opened normally without creating a link to the file).
3.      Choose Tools > Content > link, and select the area for the link
Here I mark the text on side 10 from which I wish to make a link to a attached file
4.      In the Create Link dialog box, set the link appearance, select Go To A Page View, and then click Next
Here I have selected ‘Go to a page view’ as told and I click Next
5.      Set the page number and view magnification you want, either in the parent PDF document or in the file attachment, and then click set link.
Here I go to the navigation pane and mark the attached file from the file list (the files in the list hasn’t any side number in the list) and then I click Set Link.
Then I hoped that I have created a link from the acrobat text to the attached file. In stead Acrobat has made a link to the same sidenumber that respond to the text from which i wish to make a link . F.ex. the linktext is on side 10 - then the link goes to side 10.
What do I do wrong.?
Med venlig hilsen
Mogens Pedersen
Specialkonsulent
T 33 63 13 07
F 33 63 10 11
[email protected]<mailto:[email protected]>
Fra: Bernd Alheit [email protected]
Sendt: 2. marts 2012 13:11
Til: Mogens Pedersen
Emne: Help Please - having difficulties creating af link from the text to an attached file i acrobat
Re: Help Please - having difficulties creating af link from the text to an attached file i acrobat
created by Bernd Alheit<http://forums.adobe.com/people/Bernd+Alheit> in Creating, Editing & Exporting PDFs - View the full discussion<http://forums.adobe.com/message/4241290#4241290

Dear All, could some one help me, I reset iphone ( all data ) it shows it will take 2hr but now its almost day only logo is visible on screen , what should i do , Please help me thanks

Dear All
I reset all setting including all data , so it shows that it will take 2hr, but now its almost i day only Apple logo is visible in screen , please help me what shloud i do, Actuly i want to remove all data , there is no virus no problem , just want to data, but untill now its not fix yet

Ohhh!
All you have to do is to put your iPhone into DFU Mode
Just simply connect your iPhone to iTunes, hold the power button + home button for 10 seconds, later by holding the home screen button continuously (Without leaving it) until it appears to be in recovery mode in iTunes.
You now hit the restore button in iTunes. It will download the latest version of iTunes, which might take a while.
After that, it will install the iOS (51.1) which might take 7-10 min. And you're good to go!
If you're not able to put the iPhone in DFU here are the video instructions : http://www.youtube.com/watch?v=ofpinyGlQ8I
This should solve your problem!

I udate my os to 10.6.7 and since then my Pages have color problems. The text is not visible (white on white background) it does'nt help to change the text color nor background color. Pls help

I udate my os to 10.6.7 and since then my Pages have color problems. The text is not visible (white on white background) it does'nt help to change the text color nor background color. I just download the recent trail version of Iworks and install it. The first document I opened it was ok. When I open the second one the problem appear again and stayed. Pls help

This behavior was described many times.
In every occurrence,the operating system was an uncompleted one resulting of the use of Software Update to update the operating system to 10.6.2, 10.6.3, 10.6.4, 10.6.5, 10.6.6, 10.6.7.
In such cases, the solace was to apply a combo updater.
As you are using 10.6.7, download and apply the combo 10.6.7 :
http://support.apple.com/kb/DL1361
After that, run Software Update which will urge you to apply :
Snow Leopard Font Update
Yvan KOENIG (VALLAURIS, France) dimanche 29 mai 2011 21:15:58
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

CS5: How to design a text logo that will have different faces of people of different race on it? [was: Help Me Please!!!]

I am trying to design a text logo that will have different faces of people of different race on it, please how can I develop the text such that the pictures of those faces will be on it?
Does the picture have to be at the background? Which platform (Photos, Illustrator etc) do I have have to use?
Someone please help me since I am new with Adobe packages and I use Adobe CS5

@JJMack
Thank you for your help
Please this sound too technical for me
Can you help me to break this down?
I have not even design the text of the logo and do not understand what you have text.
I know what a layer is but I have not yet txt out the Logo text
As for this: "or layers these can be converted to shape layers and merged if need be",... which platform can I do this on please (Photoshop, Adobe Illustrator etc ?
As for this: "You can then edit the slape layers path and define a custom logo shape for the edited path", I need to know the process, will try to see sample on youtube though
As for this: "Then use the custom shape tool draw out any size logo path you want and use it as a vector mask on image layer". I will try to get familiar with Vector first and please let me know alternative platform to do this on
Thanks

When I print a PDF from Adobe it creates a border when I do not one

Hello, I hope someone can help.
I am creating documents in Quark and Microsoft Publisher.
These documents have a Orange block banner at the top of the page, this represents the colour of the company I work for. It sits at the top of the A4 page and I have created a large bleed around it in Quark/Publisher.
When I export the file as a PDF and open the file up in Adobe, the banner is solid at the top of the page with no white border visible in Adobe.
However when I go to print the document, it prints out with a border. So that the banner is there, BUT there is a white gap between itself and the edge of the paper (this appears to be a border)
Can anyone provide a solution to how to remove this? Is it something to do with the size of the paper, or something Adobe is doing automatically? I am using Adobe Reader 8.
Many thanks for any help anyone can give.
Many thanks
Neil

You can also try opening the PDF with preview, then doing a copy and paste to TextEdit and printing from there.
Adobe makes it easier, but you do have software to accomplish this.
Only download Adobe reader from this site, to avoid "fakes/spoofs/malware" that will cause damage to your machine.
http://www.adobe.com/support/downloads/product.jsp?platform=macintosh&product=10
Hope this helps

How to import a text file created in Pages (iWork '08) to Photoshop Elements

I am totally a novice at working with Photoshop Elements. I need help. I want to create my business card in Photoshop Elements with a background image and then a text layer over the background layer. The logo and text was created in Pages (iWork '08). Can I import this text file to Photoshop Elements and if so how do I do that? I cannot create the same logo in Elements unless someone can tell me how to draw a circle with a transparent background so that just the outline of the circle shows and the background comes through. Thanks for any help you can offer. I have OS X Snow Leopard 10.6.4 and Photoshop Elements 6.

In PSE, to draw an empty circle use the elliptical marquee tool and hold down shift while you drag to constrain it to a circle. That will give you an empty selection, then go to Edit>Stroke (outline) selection. A window appears where you can choose the width and color of the stroke.
However, I'm not understanding why you would want to create your business card in PSE rather than in Pages or equivalent. Is there a special reason for this?
EDIT As for the text file, it would be simpler just to retype it in PSE, since it can't be very much text. Remember that PSE doesn't do all the fancy things with text that Pages can, although it can do some things (like warping) that Pages can't.
You could activate the text tool and use copy/paste, but you'll lose most of the formatting.

How to include the STANDARD TEXT Logo in SMARTFORM???

Hai experts,
Im able to get the standard text logo in SAPSCRIPT used follwing command in text editor.
v_logo is dynamic variable.
/:INCLUDE &V_LOGO& OBJECT TEXT ID ST LANGUAGE EN
But in smartforms im unable to get the Standard text logo used following steps...
in Include text node
A) Text name : &V_LOGO& <
B) Text object : TEXT            >
C) Text ID      : ST                >
D) Text Language : EN          >
Why????
What are the further steps needed??
Rewards helpful answer is very useful..
Thanks & rgds,
Muru.P.

HI
http://www.sapmaterial.com/smartform_example.html
http://www.sap-press.com/product.cfm?account=&product=H955&shoppingcart=003
Tcode SE78 is used to import graphics into the SAP system. The transaction imports the graphics and stores it
in the BDS (business transaction server) and then it can be displayed in the form.
·        To create the graphic node , call the context menu for that node in the tree structure and choose create-
>graphic
·        Enter a name (LOGO) for the node and the description (Logo Graphic)
·        On the general attributes determine whether a colored or a black and white
·        On General Attributes use the fields object - GRPAHIC, id u2013 BMAP and name - &G_LOGO& to identify the
graphic. &G_LOGO& is variable and therefore we can print company code specific logo. Program line preceding
the graphic is required.
Regards
Pavan

Help Animating A Logo

Dear Fellow Forum Users
I need help animating this Logo, but I don't know how to use After Effects, I used it a couple of times about two years ago. But I have a project am working on now. So I don't have the time now to learn After Effects from scratch, because of time and so many other projects I have to work on.
So I basically need y'all guys help with a few things I want to do with this logo.
I want to triangles to animate coming from the middle of the screen, then they would all line up back in the center, like one by one.
Then I want the word New Creations Kind come out of the white background.
Three I want to add little motion to the triangles, while there standing and a little extra glare over them.
Thanks A Lot in advance for the help given guys, may the Lord Jesus Christ Bless you all.
Regards,
Jamaine

Well, you decided to jump into the deep end of the pool, and HOW! No knowledge of what must be one of the most complicated applications ever devised... no time to learn... you're really trusting in the Kindness of Strangers here, aren't you?
And how come you got saddled with this over the observance of the birth of out Lord & Savior Jesus Chrst, anyway?
Oh, well.
Make each triangle a separate layer. Use masks if you must to isolate each triangle. Align the anchor point so that it rotates properly to align with the ones below it. Now animate the the rotation property to make them align according to the timing of the animation.
Animate the opacity of the text to make it appear. Put everything on a white background; you can either alter the background color or create a white solid, and put it at the bottom of the timeline, making it the bottommost layer.
If you need any more help than that, you're sunk, I fear. You might be able to insert a table into a Microsoft Word document just by using the help files, but this is After Effects, a far more sophisticated and complex application. You can't go into this thinking, "Hey, how tough can it be just to give a couple of instructions?"
It can be plenty tough, and this may be the day you realize that.

How to create a border for a paragraph ?

Can anyone tell me how to create a border for a paragraph ? Is this even possible without creating a table ?
I would like to have the page header with a single line below it and the page footer with a single line above it. Inserting a line seems to force unnecessary space above of below the line and using a table seems to force a blank line below the table also creating unnecessary space.
Thanks

Thanks, I had the problem with this approach that the line never appeared on each page but adding to the section master would fix it.
Still being able to set a border would be good! I did try using the text box but the border options are pretty inflexible. I was unable to just set the top or bottom borders. Did I miss something basic here or is this option just not available ?
Any idea if this is coming in a future release ?

SAPScript: how tu adjust heigh and width of standard text (logo)?

Hi!
how to adjust heigh and width of standard text (logo)?
I do not want to edit the logo, because it is used elsewhere, so I need to adjust heigh and width when using it in a form.
For now stadard text comes over the window. Here is how I use it:
INCLUDE ZHEX-LOGO OBJECT TEXT ID ST
Will reward,
Mindaugas

Hi Mindaugas,
While uploading using RSTXLDMC. You have to maintain your size of the logo.
Go through below mentioned document.
Upload TIFF files to SAPscript texts
Description
The report RSTXLDMC allows a TIFF graphics file to be uploaded from the file system of the R/3 GUI to a standard text in the R/3 word processor SAPscript. (TIFF is a registered trademark of the Aldus Corporation.)
When uploading, the TIFF graphic is converted either into a black and white raster image (parameter type=BMON ) or as a color raster image with a maximum of 256 colors (parameter type=BCOL).
The black and white raster images ( BMON) can be printed using the following printer types:
PCL-5 printer
PostScript printer
Kyocera PRESCRIBE printer
Device type SAPWIN (with SAPlpd 32-bit as of Version 2.41 for Windows NT or Windows 95)
The color raster images (BCOL) can be printed using the following printer types:
PCL-5 printer with color capability (e.g. HP Color LaserJet). Color graphics are not printed properly on monochrome PCL-5 printers (e.g. HP LaserJet 5), because the printer cannot set the color palette as required and does not perform any gray-level conversion.
PostScript printer (color graphics are automatically converted to gray levels on black and white printers using PostScript) Device type SAPWIN (with SAPlpd 32-bit as of Version 2.41 for Windows NT or Windows 95) During TIFF graphic import, the basic set " Baseline TIFF 6.0 " of the TIFF specification 6.0 is supported.
To maintain compatibility with earlier versions of the report RSTXLDMC, it is also possible to convert the TIFF graphic directly into a black and white raster image for a particular printer type when uploading. These are the three printer types PCL-5 (parameter type=PCL ), PostScript (parameter type=POST) and Kyocera PRESCRIBE (parameter type=PRES ). A raster image uploaded in this manner can only be printed using the appropriate printer type.
Besides TIFF raster graphics, direct printer commands in the respective printer language (PCL-5, PostScript or Prescribe) can also be contained in the file which is to be uploaded (printer macros). They are then transferred to the standard text unmodified.
The graphics are output by inserting the standard text into the document which is to be printed, directly or using an INCLUDE command. The printer commands, which for example draw a company logo on the page, are only output if the print request is processed by the printer driver corresponding to the macro type, otherwise they are ignored. Example: A macro of type PCL is contained in a print request. If the request is output to a printer with type HPLJIIID (to which the driver HPL2 is assigned), the macro data is sent to the printer. If the request is printed on a printer of type POSTSCPT (to which the driver POST is assigned), the output of the macro data is suppressed.
In the standard text, the printer commands are inserted between the HEX ... ENDHEX command lines in hex notation. Various report parameters allow the graphic or printer macro to be placed on the page or at the current text position. Note: When the /:HEX command line which precedes the macro appears in the text, a line break is generally made before the graphic is output. The output of the macro therefore begins in the next text line at the left window border of the current page window, as long as a shift to the right is not specified (see below).
If your own printer macros are uploaded and not TIFF files, you must ensure yourself that the normal (text) output of the driver is not impaired when the printer commands are inserted in the output from the uploaded file. The printer drivers pass the data contained in the file to the printer unmodified, therefore without control over the individual actions this triggers on the printer. For example, syntax errors should not be generated by the PostScript commands (type POST), or form feeds should not be contained in the file (unless this was intended) for PCL-5 (type PCL).
Restrictions:
In general, the output of graphics generated via RSTXLDMC from R/3 is not suitable for mass printing (that is, unless you are using the "Graphic resident on printer" feature): the R/3 spooler has to hold significantly more data in its output files. If the graphics occur several times in a spool request, the data also reoccurs. Apart from this, the network is more heavily loaded in sending the increased volume of data to the printer and the printer output is slowed significantly (varies according to printer model) if raster graphics are output as well as the text.
If your graphics reside on your printer during a printing job, the degree of 'correctness' with which they are printed depends on the amount of memory available in your printer. R/3 print drivers are unable to determine whether the amount of memory available is enough! If one of the graphics that you have marked as resident is not displayed, try reloading the graphic and switching off the parameter "Graphic resident on printer".
When printing black and white graphics on PCL-5 printers, image data is compressed in order to greatly reduce the file size.
The output of graphics and macros on PCL-5 printers, PostScript printers and device type SAPWIN (type BMON, BCOL, PCL, POST) is adapted to the page orientation used, that is if landscape is used instead of portrait, the graphic is also turned when output. This is not the case for the PRESCRIBE printers (type BMON, PRES)! With these printers, the graphic is not automatically turned when landscape is used, but appears on the page in the identical position as for portrait. You are therefore recommended not to output raster images when printing in landscape on PRESCRIBE printers.
PRESCRIBE printers do not support the resolutions 200 and 600 dots per inch when printing raster images.
Not all PCL-5 compatible printers support the resolutions 200 and 600 dots per inch when printing raster images.
TIFF graphics with compression type 2 ("CCITT Group 3 1-Dimensional Modified Huffman run length encoding ") can currently not be imported although this is a component of the Baseline TIFF 6.0 specification for monochrome images.
Color TIFF graphics with full color representation (ie. a lot more than 256 colors) are automatically converted into 256 gray levels when uploading with type BCOL.
When TIFF graphics are converted to black and white raster images (type BMON, PCL, POST, PRES) there is no default simulation of gray levels or colors of the original image on the printer (for example, by using different tones of gray). Each pixel of the original image is converted to a white or black pixel on the printer according to its intensity value.
The parameter "Number of TIFF gray levels" does, however, allow a simulation of gray/colour tones of the original image through levels of gray on the printer, when using type PCL, POST or PRES. This parameter is ignored for type BMON.
The conversion of TIFF graphics can be so time-consuming that it is recommendable to execute the report RSTXLDMC in batch processing. Note: in batch, the file is always read from the file system of the application server (ie. not from the file system of the GUI).
The length of an individual text in the text file is limited. When importing TIFF graphics with very large dimensions, especially if more than 2 gray levels are used, a termination can therefore occur when saving the standard text ("EXPORT_TOO_MUCH_DATA"). This restriction can only be avoided by reducing the TIFF graphics. Note: The display of a raster image in Postscript or PRESCRIBE format needs from two to three times as much space as displaying in PCL-5.
When processing very large TIFF images on PostScript printers, a print termination can occur with PS error message "limitcheck". In this case the internal memory of the printer is insufficient to scale the required raster image. This implementation limit cannot be influenced by changing the report parameters when importing.
Requirement
The file which is to be uploaded can contain the following formats/ commands:
Baseline TIFF 6.0 raster image files. The image information of the TIFF file is converted into black and white/color raster images when uploading. Note: As the TIFF format allows a variety of variants, only a basic set of TIFF 6.0 formats is supported here described in the TIFF 6.0 specification as Baseline TIFF 6.0.
PCL : PCL-5, Hewlett Packard Printer Control Language 5 for HP LaserJet 3, 4, 5 series and compatible printers. The data is output by the printer driver HPL2 only.
PRES: Kyocera PRESCRIBE for Kyocera laser printers. The data is output by the printer driver PRES only.
POST: Adobe PostScript or EPS format (encapsulated PostScript ) for PostScript printers. The data is output by the printer driver POST only. In the upload, one of the end-of-file markers (CTRL-D, hex $04) which may be contained in the PostScript file is not transferred.
For PostScript files which contain a bounding box entry (for example, all EPS files) the macro/graphic can be scaled to a size specified by the user. In this case, a small lead text and trailer are generated by the report for the macro data and inserted in the standard text.
Parameters of RSTXLDMC
File name
Path and file name of the file to be uploaded in the file system of the R/3 frontend (dialog processing) or in the file system of the application server (batch processing)
Type
Way which the data contained in the file is to be converted. Possible values are BMON, BCOL, PCL, POST and PRES. With parameter values BMON and BCOL, a TIFF 6.0 file is expected. This is converted into either a black and white raster image (BMON) or a color raster image (BCOL). These raster images are printer-independent and can be printed using various printer types (see above).
With parameter values PCL, POST and PRES, either a TIFF 6.0 file or a file with printer commands in the appropriate printer langauge is expected. If the file is a TIFF file, it is converted into a black and white raster image for the printer type specified in the parameter. The presence of a TIFF file is recognized automatically. If the file is not a TIFF file, the file contents are regarded as the printer macro of the respective type. Data loaded with type PCL, POST or PRES can only be printed on the respective printer type.
Resolution for TIFF raster images
Resolution which should be used when importing a TIFF raster image, in dots per inch (dpi). If an allowed value is entered here, this overrides the resolution information in the TIFF file. The allowed values are:
75 dpi
100 dpi
150 dpi
200 dpi (not for type PRES, for PCL only HP LaserJet 4,5 series)
300 dpi
600 dpi (not for type PRES, for PCL only HP LaserJet 4,5 series)
Changing the resolution affects the size of the graphic on the printer. If a resolution of 300 dpi is stated in the TIFF file and this parameter is set to 75 dpi, the graphic is four times as big when printed as at the outset.
Note: Kyocera PRESCRIBE printers do not support 200 and 600 dpi resolutions.
Note: Not all PCL-5 printers support resolutions 200 and 600 dpi, for example HP LaserJet 3 series does not, but LaserJet 4 and 5 series do.
Graphic Resident on Printer
Normally, graphics that occur more than once in a printing job (a company logo that appears on each page, for example) are sent to the printer repeatedly each time they are needed. In order to avoid this kind of redundancy, you can select this checkbox on the selection screen. The R/3 print driver then stores the graphic in the printer's memory and the printer retrieves the 'resident' graphic memory every time that re-occurs in your job.
Caution: Whether or not the printer correctly reproduces the graphic depends on the amount of memory available in the printer during the printing job! You should avoid using this feature with color graphics since they take up a lot more memory than monochrome graphics.
This parameter can only be used with types "BMON" and "BCOL".
Absolute positioning
Determines whether the macro/graphic is positioned absolutely or is to be output at the current text position. If this checkbox is selected, the graphic is positioned absolutely (parameters "X-position" and "Y-position" are used), if this checkbox is not selected, the graphic is positioned at the current text position (parameters "Reserved height" and "Shift to right" are used)
Absolute X-position
Horizontal position (space from left border) of the macro/graphic, if absolute positioning is required. This is the parameter XPOS of the HEX command.
Absolute Y-position
Vertical position (space from upper border) of the macro/graphic, if absolute positioning is required. This is the parameter YPOS of the HEX command.
Reserve height automatically
If this checkbox is selected, the system automatically inserts the actual height of the graphic during printing into the subsequent "Reserved height" parameter.
Reserved height
If positioned at the current text position, this parameter specifies the horizontal spacing to be reserved for the macro/graphic, which must not be printed with text from the paragraph. This is the parameter HEIGHT of the HEX command.
Shift to right
If positioned at the current text position, this parameter specifies the space between the left border of the macro/graphic and the left border of the page window. If this value is increased, the macro/graphic is shifted to the right. This is the parameter LEFT of the HEX command.
Unit of measurement for positioning
The unit of measurement in which the position values (X,Y, height, shift) are specified. Possible values are CM (centimeters), MM (millimeters), IN (inches), PT (typographic point = 1/72 inch), TW (1/20 point = 1/1440 inch)
Text title
Comment used for the attribute "Title" of the standard text generated as well as as a comment line in the text itself
Line width
Number of columns to be used in the standard text when generating the HEX...ENDHEX command lines. The default value is 132
Text name
Name of the standard text to be generated. If an * character occurs in the name, it is replaced by the value of the parameter "Printer type". For example, if the entry is ZHEX-IMAGE1-* and the printer type = PCL, the text name ZHEX-IMAGE1-PCL is generated. The default value for the name is ZHEX-MACRO-<printer type>, but the standard text can be named as required (take into account customer reserve). Standard texts are client-dependent!
Note: The name of a standard text can be up to 32 characters long !
Text ID
ID of the standard text to be generated. The default value is ST (general standard texts)
Text language
Language key of the standard text to be generated. The default value is the logon language
PostScript scaling
Flag which determines how the macros/graphics of type POST are handled. If set to 'X', the report expects a PostScript comment line in the file
%%BoundingBox llx lly urx ury (e.g. %%BoundingBox -1.5 0 21.4 14.1)
as present, for example, in all EPS files, in which the dimensions and the position of the macro/graphic are specified (if a bounding box comment is not included, 0 0 1 1 is assumed as the default value). This information is then used by the report to insert PostScript commands which scale the macro/graphic to the size specified in the parameters "Width" and "Height" (listed below).
If the flag is set to ' ' (blank), the PostScript file is transferred to the standard text without any additions (any transformations to the coordinate system used by the printer driver must already be contained in the file).
The flag must be set to 'X' for the import of TIFF files for type POST.
Width according to PS scaling
Required width of the macro/graphic if the flag PostScript scaling is set. Can remain at zero for the import of TIFF files, the size is then determined by the resolution of the graphic.
Height according to PS scaling
Required height of the macro/graphic if the flag PostScript scaling is set. Can remain at zero for the import of TIFF files, the size is then determined by the resolution of the graphic.
If you want to scale the PostScript graphic with these parameters, one of the two values, width or height, can be specified with zero. The graphic is then scaled so that the width-to-height ratio remains unchanged and the original graphic is not distorted.
Unit of measurement for PS scaling
Unit of measurement in which the parameters "Width" and "Height" are specified. Possible values are CM (centimeters), MM (millimeters), IN (inches), PT (typographic point = 1/72 inch), TW (1/20 point = 1/1440 inch)
Number of TIFF gray levels
Number of gray tones which are to be used on the printer for displaying the original image. Note: This parameter is only evaluated when using types PCL, POST or PRES!
Possible values are 2,4,9. With the default value 2, each pixel of the original image is converted either to a white or a black pixel on the printer. With the value 4, each pixel of the original image is converted on the printer with 4 pixels, which simulate 4 different gray levels. With the value 9, each pixel of the original image is converted on the printer with 9 pixels which simulate 9 different gray levels.
Note: With values 4 or 9 the resolution of the image is doubled or tripled. The restrictions on the possible resolutions (see previous parameter) then apply for the resulting resolution.
Output
Individual steps of the upload procedure are logged in the report list generated and, if necessary, errors reported. The uploading of TIFF graphics, in particular, is cancelled if there is a variant which is not supported. A message to this effect is then issued. If execution is successful, the report generates a standard text with the key specified in the parameters. If the standard text already exists, a window appears with a warning before the text is overwritten.
Regards,
Ameer Baba.

How to INclude TEXT MOdule created in SForm?

How to INclude TExt Module created in Samrt forms into a text node...?
PLease explain.....ANy suggestions will be appreciated...
REgards,
Kittu

Hello Netaji,
IN general attributes, from the drop down menu. I had selected Text Module then It is asking me for the
Name : zxxx(Name of the Text module created in SForm)
Language : ENGLISH
Selected the option - No error if no text exists
- ALways copy style from text module
Then I had clicked on COPY button...Then it is automatically turning into Text Element
It is showing nothing in that Text area. Am I going right?
Please correct me....If I am wrong....I am trying to put this in Text node.
I had created a Text module in the Smart form by selecting the Radio Button in Smart form.
Please help....
Regards,
Kittu

HELP! Blurring text/logo creates visible border

Similar Messages

Maybe you are looking for