Dear All, could some one help me, I reset iphone ( all data ) it shows it will take 2hr but now its almost day only logo is visible on screen , what should i do , Please help me thanks
Dear All
I reset all setting including all data , so it shows that it will take 2hr, but now its almost i day only Apple logo is visible in screen , please help me what shloud i do, Actuly i want to remove all data , there is no virus no problem , just want to data, but untill now its not fix yet
Ohhh!
All you have to do is to put your iPhone into DFU Mode
Just simply connect your iPhone to iTunes, hold the power button + home button for 10 seconds, later by holding the home screen button continuously (Without leaving it) until it appears to be in recovery mode in iTunes.
You now hit the restore button in iTunes. It will download the latest version of iTunes, which might take a while.
After that, it will install the iOS (51.1) which might take 7-10 min. And you're good to go!
If you're not able to put the iPhone in DFU here are the video instructions : http://www.youtube.com/watch?v=ofpinyGlQ8I
This should solve your problem!
Similar Messages
-
i have a generation 1 ipod touch my wifi is not working, under setting the wifi says no wifi and is gray. i have tried resetting it and its not workin. what should i do, please help. thanks
If a restore did not fix it, you have a hardware issue--possible bad wi-fi radio.
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD -
okay i updated my iphone 5 and i changed my password and now i dont remember it i cant restore my phone because my power botton does not work so what should i do PLEASE HELP!!!!!!! Thanks
Hi sigrun from mo,
If you are having a button issue on your iPhone that prevents you from doing further troubleshooting, you may need to have the phone serviced. You may find the following page helpful:
Service Answer Center - iPhone
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
Regards,
- Brenden -
My IOS Device 5s Icloud Lock Can i send Imei to Remove cloud account cuz its from Previous Account my fri Forget his password What can i do please help me
Hello, MaoPhanna.
Thank you for visiting Apple Support Communities.
This sounds like Activation Lock has been enabled on this device. Here is some helpful information regarding this feature.
iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/ht5818
If you purchased your device from a third party, this device may be locked to their Apple ID. If this is the case you may want to check out the article below.
Find My iPhone Activation Lock: Removing a device from a previous owner’s account
http://support.apple.com/kb/ts4515
Cheers,
Jason H. -
i have two security questions but i don't have a rescue email address and i know my apple id and password, what should i do please help me!!:(
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312 -
After upgrading my iPhone 5 to iOS 7 iTunes will not stay open once the app launches...does anyone know how to fix this? Please Help :)
I have exactly the same problem. I too have tried everything that's been suggested, but still not working. Don't really what to do next? I have an iPhone 4S.
-
my camera on my iPhone 5 is not working it's stuck on the shutter screen what can I do please help!!!!
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
-
Wi-Fi to your iPhone does not work with the knowledge that I have worked Restart for the same purpose network does not work What is the solution please help as soon as
Okay, the Wi-Fi doesn't work. Turn it on.
Beyond that, we cannot offer any other assistance as you've failed to provide useful details of the problem.
When responding, post in your native language as your English makes very little sense. -
i can't turn on my iphone after I use the Itunes.It's updating new software and then my laptop was ran out of battery life what should I do please help me
I'm having a same problem, taking my phone to genius bar tonight. Is there any virus going on??
-
my phone ran out of battery as it was updating to iOS 6. Now it is having trouble rebooting. The silver apple logo keeps showing up and fading away. And doing it all over again... What should I do PLEASE help!! My phone is NOT jailbroken.
I should mention, it was on low power as I was using it.
-
i have connected my iphone to pc through itunes after adding a music and removed my phone there is no content in my phone what should i do plz help mee
Greetings michealjerold,
When syncing between iTunes on your computer and your iPhone, be sure to use the procedures in this article -
Sync your iPhone, iPad, and iPod with iTunes using USB - Apple Support
Thanks for using Apple Support Communities.
Be well,
Brett L -
i have erased my all phone contact list and then the message comes that it will be deleted with in an hour. but now my phone is not starting and only the apple logo appears on the screen. what should i do now..!
That number is for an apple server in the UK that is used for iMessage activation. A hidden SMS is snet to that number when you turn iMessage on and is used to verify your phone number. I suggest you turn iMessage off. In settings/phone turn on dial assist. Check with your carrier to see if you can send an international SMS as you end that possibility to activate iMessage. Rest your phone (Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost).) then turn iMessage back on.
-
i bought macbook air from my friend and he dont have the apple id which he used when he bought it so my window crashed and i tried to reinstall the window but i dont have the apple id what should i doo please help
The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
3. Other issues
If you see a lock screen when trying to boot from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another authorized service provider to be unlocked. You may be asked for proof of ownership.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. -
I just got a new macbook and before i had to sync all my photos from my old mac onto a bunch of flash drives and most are on my phone. Ive successfully imported the flash drives and the photos on my camera roll to my new macbook iPhoto but not the other 1,000+. My computer isn't recognizing it maybe because its in 'mac events'. Does anyone know what to do? Please help it would be greatly appreciated especially since i don't have much room left on my iphone anymore. thank you.
You'll need third party software to get the images not on your camera roll. iExplorer is one such app, but there are others. Search on MacUpdate
-
help my my battery life is really bad on my ipod touch 5 with ios 7.0.4
my ipod touch 5 is charging from 12% to 56% on 1minute and then when its 56 it turns to 26 after 2 minutes what can i do?, please help me.Stop unplugging it.
At best, the percentage indicator is approximate and regardless of what your percentage indicator states, the battery will not go from 12% to 56% in one minute - and be able to run the iPod without dropping as much as yours does.
The behaviour that you cite is nothing unusual. If your battery is at only 12% when you plug it in, it will still take two or three hours (thereabouts) to be fully charged. In the meantime, the percentage indicator cannot be relied upon.
Charging a battery takes something like four hours from flat. So plug your iPod in and leave it alone for a few hours. The iPod Touch user guide for iOS 7 states that there is a battery icon in the top-right corner, which shows the battery level or charging status. It appears to be slightly different from earlier versions, but this is is what the guide shows:
I assume therefore, that when the iPod is fully charged, the lightning symbol disappears, leaving only the full battery.
If your iPod shows this lightning symbol when you put it on charge (not your % indicator, but Apple's icon), leave it on charge; check it every hour (maximum of four hours) to see if the lightning flash has disappeared. When it does, then - and only then - is it fully charged. At this time, when you unplug it, your percenatge indicator should show a much better level of charge.
Spend time enjoying your iPod instead of fretting about why a part-charged battery doesn't last as long as you think it should.
Message was edited by: the fiend
Maybe you are looking for
-
Error message while creating configurable material for variant configuration.
Dear All, I want to create configurable material for the purpose of variant configuration. When trying to create configurable material using mm 01 or mm k1, it is displaying an error message that internal number assignment is not possible for the mat
-
Hp color laserjet cm1312nfi mfp misprint
Good day. I have a HP Color Laserjet CM1312nfi MFP, when printing, it prints 2 to 3 pages and then displays cleaning on the lcd display and after it runs through with the cleaning it comes up with the error "Misprint, Press okay to continue" and if y
-
Can't connect my secondary computers
I have my intel imac plugged into the new airport extreme. I have a closed system using WPA2 personnal. I can't connect using my emac or ibook. If I try to log on to "other" the "OK" button is grey. imac dual core intel Mac OS X (10.4.9) emac and i
-
FCKEditor Site Studio using in IE9 causes issues
Hi I am using Site Studio component version 2012_07_03 (9.0.0.793). In IE 9, when in contrib mode and editing using the FCKEditor, if press something like the Anchor icon, or Table or Find / Replace etc it shows a blank dialog. IE 8/firefox works fin
-
Photo Faces showing full photo instead of faces..?
Hi and thanks for reading. If I sync my iPhoto Faces to iPad and iPhone, while I have actual faces in my Mac iPhoto and iPhone preview, on the contrary in my iPad I have the full photos with the name written on a bottom line. Is there any chance to h