HELP!  Can not access Web Service

I get error below if webservice asmx and URL of domain do not
match...
they both have to have
http://www or no 'www' in order to run...
otherwise I get the following error below BUT my cross domain
is at
the root of the webserver!! what am I doing wrong???:
[RPC Fault faultString="Security error accessing url"
faultCode="Channel.Security.Error" faultDetail="Unable to
load WSDL. If currently online, please verify the URI and/or
format of
the WSDL
http://www.velocitytrading.net/VTOrdEnt.asmx?WSDL)"
at mx.rpc.wsdl::WSDLLoader/faultHandler()
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at
mx.rpc::AbstractInvoker/
http://www.adobe.com/2006/flex/mx/internal::dispatchRpcE\
vent()
at
mx.rpc::AbstractInvoker/
http://www.adobe.com/2006/flex/mx/internal::faultHandler\
at mx.rpc::Responder/fault()
at mx.rpc::AsyncRequest/fault()
at DirectHTTPMessageResponder/securityErrorHandler()
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at flash.net::URLLoader/redirectEvent()
CROSS DOMAIN
<?xml version="1.0"?>
<!DOCTYPE cross-domain-policy SYSTEM
http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd">
<cross-domain-policy>
<allow-access-from domain="
http://velocitytrading.net"/>
<allow-access-from domain="
http://www.velocitytrading.net"/>
<allow-access-from domain="*.*"/>
</cross-domain-policy>

Hi CJSteu,
Can u add this crossdomain.xml in ur server bin and dtd also
if needed and check the server is able to invoking the
crossdomain.xml by
url ex:
http://localhost:7001/crossdomain.xml
<?xml version="1.0"?>
<!DOCTYPE cross-domain-policy SYSTEM
"cross-domain-policy.dtd">
<cross-domain-policy>
<site-control permitted-cross-domain-policies="all"/>
<allow-access-from domain="*" to-ports="*" />
<allow-http-request-headers-from domain="*"
headers="*"/>
</cross-domain-policy>

Similar Messages

  • Can not enable web services. printer on the network. default ip not connecting using auto ip

    B210 - have tried resetting defaults . default IP address will not connect to network with auto IP  had to set IP addrtess manually something similiar to the properties on the verzion hot spot. can not disable web services - never enabled.
    no Primary or secondary DNS server. not sure if this is problem. can print ok thru network.
    This question was solved.
    View Solution.

    Hey bobupton!
    Try going into the printer's EWS and using Google's public DNS servers (8.8.8.8 and 8.8.4.4). It sounds like you know what you're doing so I skipped a few steps on how to get there but if you need more help with it let me know!
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • [Urgent] can not find Web service diagram in new gallery

    New Gallery -> Business Tier -> Web services
    can not find web services diagram item.
    But i read book about 10g there is web services diagram
    my version is 10.1.3.3

    Hi,
    I think the book means the WSDL editor that opens when you click on a WSDL file
    Frank

  • Can not access web wifi simble on but can not connect the the internet

    wifi on but can not access internet

    I COULD SOLVE THE PROBLEM!!!  :    CHANGE YOUR ISP
    I it is obvious that we are talking about different issues, but all arise from the same origin. I am a surgeon and fortunately one of my patients is executive manager of one of biggest ISP companies from which I have bought my Internet service for home and my clinic.
    One day I told him the problem and he promised to check it for me. A few days later he called me and discussed the exact problem (unfortunately as I am not I.T professional, I couldn’t understand it well, I can just remember he was talking about MULTIPLEXING incompatibility between Mac security settings and that specific ISP multiplexing settings, He also said they had similar problems with some Linux users. I can remember he relate the problem to cheap ISP hardware, which leads to security issues which  are ignored by Windows Systems but leading to connection blockade in Mac Browsers. That’s why if you PING yahoo.com, you will see everything is OK but your browsers are not working)
    In fact this is a hardware issue which is related to ISP (Internet Service Provider) security and not your Mac.
    The day after, I took my MacBook to some ISP offices and asked them to let me connect to their line just for a test. “ Surprisingly I found out without changing my MacBook’s settings it works well with some ISPs and not with others!! “
    I have two ADSL lines: one at home and one in my clinic. First I changed my home ISP and everything is well at home from the day I did the change. But before changing my clinic’s ISP it worked at home and not at the clinic. Later I changed my clinic’s ISP and afterward never I had any problem.  This proves ( as that manager said also) this problem is related to ISP and not Mac itself and that’s why Apple could not have resolved the problem yet: different ISPs have different issues.
    Here I can make some suggestions:
    1- First, take your MacBook into different ISP offices and find the one which works well (before making the contract and paying money to the ISP, restart the Mac or send it into sleep mode repeatedly to make sure the connection never drops with restart or sleeps)
    2- Change your modem:  Modems as TP-LINK, D-LINK, are not well compatible with Mac.  Apple modems or Linksys are perhaps the best choices (this is not main cause of internet drop, but can affect the performance)
    3- Make sure your neighbor’s Wi-Fi is not exactly on the same channel as you are using (I use iStumbler for finding my neighbor’s channels)
    4- Find best DNS: ask your ISP to provide you most compatible DNS’s for you. Perhaps most known DNSs are 8.8.8.8 and 4.2.2.4.It helps you to browse the Internet more efficiently
    Some people in other forums suggested that upgrading to Mountain Lion has helped them. But It didn't work for my clinic's line. Just changing the ISP at clinic resolved my problem
    BETWEEN THESE 4 SUGGESTIONS, THE FIRST ONE IS THE MAIN SOLUTION AND NO 2-4 CAN HELP THE PERFORMANCE.
    Move on!!!   Change your ISP and let me know if it works!!!!

  • Can not activate Web Services

    Hi all! I want to activate ePrint, but activating Web Services is not working at all. The server can't be found is the message I'm getting, both on my machine using the Web Services button and also when I'm logged in using my browser. The Wifi sign is giving a nice blue steady signal on the printer, and making the Wifi connection wiith my router was easy since it had a WPS button. According other topics I changed also to manual IP and changed the DNS servers, but still server not found. For example this topic is what I did, and what you also see in below images. Can somebody help please.  I also included some pictures of settings.    

    Hi , Welcome to the HP Community!I hope you have a pleasant experience here. I'd like to help you with the web services connection errors you are getting on your HP Officejet Pro X476 dw printer. I can see based on the second picture you've uploaded that you are using the printer wirelessly? (If using it on a wired connection, you'll need to make the IP and DNS changes under Wired on the left hand side of the page in the screenshot) The DNS listed in the image is 8.8.8.8 and 8.4.4.4, the correct secondary DNS should actually be 8.8.4.4. I'm not entirely sure if this will make a difference for you, but I'd certainly recommend making the change and giving it a try. I'd also recommend trying a Level 3 DNS instead (since this is a commerical unit). Try 209.244.0.3 for the Primary DNS, and 209.244.0.1 as the Secondary DNS. Another suggestion I would make, would be to download and run the firmware update utility for your product to make sure that the firmware is up to date. It's very common to have issues connection to the web services server, when the firmware of your product is out of date. You can download the firmware update utility here: HP Officejet Pro X476dw Multifunction PrinterNOTE: Before you run the update utility, please make sure the printer is connected via USB. When running the update over wireless, you run the risk of interruptions during the update that may cause harm to the machine. I hope this helps!

  • Netbeans 6.1: Can not create Web Service Client

    Hi
    I am trying to create a Web Service Client in Netbeans 6.1. The error message is:
    Web Service Client can not be created by JAXWS:wsimport utility.
    Reason: Could not initialize class com.sun.xml.ws.api.addressing.AddressingVersion
    Does someone have an idea what problems is? Note that I have created web service clients many times before without problems.
    Thanks in advance for any help
    Ralf

    Hi
    It works now... I rebooted the workstation.
    Regards,
    Ralf

  • Can not call web service created by workbench ES

    I created a process in LiveCycle ES Workbench, a webservice is created automatically after activate this process.
    I can see my wsdl on this path below.
    http://myserver:port/soap/services/my_process?wsdl
    After that, I created form in designer 8.1 then I call my web service.
    but appear "Error attempting to read from file"
    Please help me to solve this error.
    Thank you.
    Phatthalaphon.

    Another possible reason is that you are behind an NTLM authenticating proxy and don't have the "Display PDF in browser" option selected. This type of authentication is used by Microsoft ISA proxies (and probably a few others).
    The following describes how a web browser makes a connection to a web site behind a NTLM proxy:
    1) Request for the resource sent to the proxy.
    2) Proxy replies with "407 Proxy Authentication Required" and a challenge.
    3) Browser gets the required proxy credentials (usually the current Windows credentials) and hashes them with the challenge.
    4) Browser re-requests the resource, this time with the hashed response in the header "Authorization".
    5) Once the proxy verifies the credentials, it then forwards the request on to the actual resource.
    Unfortunately Adobe Reader thinks that the "407 Proxy Authentication Required" is the actual response from the resource and tries to process it (which will fail with "Error attempting to read from file"). I can prove this is what was happening by looking at an Ethereal dump of the communication from Adobe Reader. I have explained the problem to a couple of Adobe people and they both think that this issue will not be resolved (in the near future anyway - see http://forms.stefcameron.com/2007/05/21/connecting-to-a-web-service/#comment-2970)
    We had to abandon a project (a fair way into it too) that made use use of a Reader Extended interactive PDF that would submit all of it's data once completed because of this reason.
    Thankfully along came Form Guides! Because Form Guides use the Flash Player which in turn uses the browser's connection (which must have already completed the NTLM authentication before it downloads that .swf).
    Hope this helps and is relevant.

  • Why JDEVADF11.1.1.3 can not test web service in IE for  Integrated WebLogic

    Hi,
    Testing a web service deployed to Integrated WebLogic Server.
    1.When you deploy the web service to Integrated WebLogic Server, examine the contents of the log window. Find http://IP_address:port/Project1-context-root/MyWebService1
    2.Copy the URL and paste it into browser. The browser shows a simple page which lists the operations available on the service.
    3.Enter a parameter, and click Enter. The result from the web service is displayed.
    My question:
    Why only display Web Services Endpoint and Information . Can not have Enter a parameter and operations available on the service.
    HttP analyzer test web service is OK.
    Thanks

    Hi,
    That is because you are looking at the endpoint information.
    If you want to test the service in a browser, then you can use the Weblogic Test Client.
    When your Integrated WLS is running, point the browser to the following url: http://localhost:7101/wls_utc/
    Thanks,
    Vishal

  • Can not execute web service out of vc modelled in nwds

    Hi,
    I am working on CE 7.11 and modelled in NWDS a VC model. I am using several web services. The web services was found by Service Registry and could be added to the vc model without any problems.
    But when I deploy my vc model and try to execute a service I got two errors:
    Error occurred while identifying the destination : Destination CE2 not found
    Error occurred during Destination Lookup
    I know that I have to set something, somewhere but I do not know where. I could cry!
    May somebody help me please?
    Regards

    Hi,
    thats really crazy. You lead me to a new thinking and after hours I got my example running!
    In NWDS:
    When I search and add the web service over the Service Registry and right click at the method > Configure > Target Component I see that NWDS takes as System alias "CE2". Thats wrong because, actually it should take the service name!
    To handle this problem at Window > Preferences > Web Service Configuration I define new service, refresh my service search in NWDS and add it to the model. Now at "Configure > Target Component" I have the correct system alias.
    As final step I only have to define in NWA a HTTP Destination with the exactly same name as defined in System alias.
    But do you know why NWDS takes wrong "System alias" over Service Registry menue?
    Regards

  • Can not access web interface: Linux: permission denied

    When starting my oracle-xe on centos5 it works but i can not open the web interface. During install i have configured it on port 81 and this is the error i get when starting the db:
    30-MAY-2010 19:17:54 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=localhost.localdomain)(USER=oracle))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=169869568)) * status * 0
    Error listening on: (Description=(Address=(Protocol=tcp)(Port=81)(Host=localhost))(Presentation=HTTP)(Session=RAW))
    30-MAY-2010 19:17:57 * service_update * XE * 12546
    TNS-12546: TNS:permission denied
    TNS-12560: TNS:protocol adapter error
      TNS-00516: Permission denied
       Linux Error: 13: Permission deniedFirewall and seLinux are disbled.
    I have installed oracle-xe as root and added root to the dba-group
    What could be the issue for this?
    Edited by: Yannick.O on May 30, 2010 10:35 AM

    You have to use some port higher then 1024. Ports below 1024 are reserved for root user only.

  • M451dn can not enable web service tab

    I BOUGHT A NEW LASERJET PRO 400 M451DN
    NETWORKED PRINTING WORKS PERFECTLY
    TRYING TO ENABLE WEB SERVICE TAB AND SAYS "CONNECTION ERROR CHECK CONNECTION"
    ITS ON MY DMZ SEGMENT WHAT DO I LOOK FOR?
    THANKS IN ADVANCE FOR ANY HELP
    JOHN

    Hello,
    The first thing I would do is follow step six in this document to set a static IP: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02817031&cc=us&dlc=en&lc=en&product=4023246&tmp...
    When it askes for DNS information, enter in Google's DNS. Preferred DNS = 8.8.8.8 Alt DNS = 8.8.4.4
    If the printer is on a corporate network, it may require a proxy to get an internet connection.
    If that does not help, if you could provide me with the following information it would help me out. First, who is your ISP( Internet Service Provider, i.e. Comcast, AT&T, Verizon, ect.)? Second, who is the maker of your router? Lastly, what is the model number and firmware version of your router?
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Installed hp100 envy 410a. can print from desktop - can't access web services on printer

    product name:  hp envy 100 410a
    operating system:  windows 7
    error message on printer:  problem connecting to web services server.
    this happens whenever I try to enable eprint, web services or updates.
    because of this, i cannot get an email activated to be able to print from other computers

    Hello gsclose,
    In order to enable web services there are a few things you need to do first:
    1. Make sure you are connected wirelessly to your network. You may connect using the Wireless Setup Wizard located under the Network Menu on the Main Screen.
    2. Next, make sure your printer has all of the latest product updates. You can check this by going to Setup (wrench icon in top right corner of screen), then pressing the Web Menu, then going to Product Updates, and finally selecting "Check for Product Updates". You may need to do this step multiple times as sometimes there are multiple updates needed for this printer.
    After performing these steps you should then be able to go back to the Web Services option under Web Menu and enable this for eprint mobile printing.
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • Urgent help -can not access Documents (windows 7)

    After some one renamed one profile and my documents (roaming profile and my documents redirected to network path too through group policy).  Now , I can not open Documents.  I got this message: "can't open this item  It might have been
    moved, renamed, or deleted.  Do you want to remove this item?"
    Thank you.

    After some one renamed one profile and my documents (roaming profile and my documents redirected to network path too through group policy).  Now , I can not open Documents.
    Since you have a roaming profile, you must be connected to a Windows server. If so then you should discuss this problem with your network administrator.

  • Intermittent can not access web sites.

    I have a HughsNet satelight dish/ HughsNet modem. I have a
    WRT 160N v3 rounter that routes two computers (mine and my wife's) that are
    connected to the router with Cat 5 cables. Each computer has a printer attached to
    the local computer only (no sharing). We have had several power outages.
    We have been having increasing problems with connecting to websites and
    connecting to AOL. We have these problems with both AOL and Google Chrome.
    The error messages are: "The web address could not be found", and onece I got:
    "More than one device is performing address translation (NAT)". Also, some
    downloads fail.
    What I have already tried: I opened a utility (trouble shooter?) where you type in the
    name of the website and it shows the numerical translation...it was working without
    error.
    These problems occur on both computers and it does not matter if only one is being used and
    the other is sleeping/shut off.
    I flushed the DNS cache on both PCs:
    (Open up a command prompt (Start > Run > cmd.exe > OK).
    Type in the command ipconfig /flushdns)
    I made sure that my router's firmware was the latetest available.
    I changed the router to distribute Goggle's DNS (8.8.8.8, 8.8.4.4.) instead of the default
    I.S.P's.
    I opened my Local Host file and checked to make sure that there was not any ip
    addresses listed that were not commented out (#).
    However, when I went to my wife's comptuer to do the same thing, C:\Windows
    \System32\dirivers\etc, there was NO host fire or any other file in the etc folder. Do
    not know why, I never deleted it and my wife would not know how to delete it.
    When I typed the the ip address for the router on my wifes compter (mine was o.k.),
    instead of a blank user name and "admin" as the password, both fields were
    blank...keeping me from access it. I tried entering admin as the password and
    leaving the username blank, but it told me I had not entered the correct password.
    I have disabled my Firewall, no change.
    I have run Malwarebytes, and have reset (little red button on the back), the router all
    to no avail.
    What to do? Any help, ideas please.
    Note: I am a rank amature. If you give me an abstract of a possible solution (like: set
    your router to bridge mode, I will not be able to do it. Please give any possible
    solutions in the "just like I am six years old", format: First type in XXXX then select
    XXX, then go to XXXXX etc. An abstract answer will only make sense to other
    experts (which I am not), and frustrate me.
    Thanks for any help.

    In this example, they show you how to change the local IP address to 192.168.2.1. But use 192.168.4.1 to be safe. Don't worry that it says DSL. It's the same principal.
    http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=3687

  • My phone simply will not access web services despite showing EV symbol

    Please for the sake of god help me with this. I have searched this world wide web for the last five hours of the eve before returning to my college and i need to get this problem solved. My data usage is set to "On", and yet, i get a loading white web page that lasts forever.
    - YouTube opens, but not a single video shows up in the listings
    - the app store opens, but again, not a single app
    -Amazon Mp3, ditto
    I have tried a triple reset, a battery replacement, and even have chatted to random Palm reps from India, but nothing, even the latter, worked.
    Thanks!
    Post relates to: Pixi p120eww (Sprint)

    Try a different cable and a different charger. If neither fixes it you probably need a new battery. Apple will replace it for $80 in the US; I don't know what the charge is in other locations.

Maybe you are looking for

  • Step to Upgrade service plug-ins the ST-PI and ST-A/PI Plug-Ins

    Dear all, I have to upgrade service plug-ins the ST-PI and ST-A/PI Plug-Ins the current release. Plug-In     Release ST-A/PI     01J_ECC500 ST-PI     2005_1_640 After running the report RTCCTOOL the following details are No.   Missing addon/ transpor

  • Lenovo System Update not installing a driver

    I reinstalled Windows 8.1 Pro on a X1 Carbon Touch, model 3448.  I then installed the Lenovo System Updater, version 5.06.0027.  Many drivers were installed, but I still have an unknown device in Device Manager.  In msinfo32.exe, I see this in Proble

  • How to get a field from an attached excel/csv?

    I currently manage some price lists for the company I work for. They are graphical, and usually created in inDesign and then exported to pdf. I'm looking for a way to attach our company's prices in an excel sheet, (or delimited file) and be able to p

  • How do I fix a permissions problem that's emerged since I created a Snow Leopard partition on my Lion iMac?

    I recently partitioned my iMac, which was running Lion, so I could open old files created by apps like AppleWorks. I installed Snow Leopard in the new partition and the apps I moved there are running fine. But now when I'm using Lion and want to save

  • Clamav running even though virus filtering is disabled

    greetings all, I am running an OS X Server 10.4.8 machine. I have virus filtering turned off, and with good reason - when it is on, there is a big performance hit. However, this afternoon clamav randomly clicked on, even though virus filtering is sti