HELP! Captive 6 issue with backgrounds bleeding

I have a background on a slide about 9-11 slides in (they are all similar so I don't know which one is the culprit) that is somehow bleeding an image on some of the slides moving forward. I'm not sure why its doing it and I can't find any consistency with which slides have the problem and which ones don't . It's off and one for about 20 more slides, then it quits. Any ideas?

These are backgrounds that were created with the recording button in captivate of an application (web based). I did get it to go away by going in and highlighting all the slides then checking the box for project background image or whatever that box is in the properties. The problem is, if I bump anything, it seems to come back and sometimes on different slides. I also hit reset master slide and the master slide is just plain white. It is currently working but I'm afraid if I work on it again it will show back up. I'd like to know what I did wrong or right in having it show up AND in having it go away. FYI, I did check to see if it was an image as I went down the same path as you are suggesting about it playing for the rest of the project, it isn't.

Similar Messages

Virsa CC 5.1: Issue with Background Job

Dear All,
I almost finished configuration of our new Compliance Calibrator dashboard (Java stack of NW'04). But, unfortunately, have an issue with SoD analysis now.
Using SAP Best Practice recommendations, we have uploaded all functions, business processes and risks into CC database, and then successfully generated new rules (there are about 190 active ones in our Analysis Engine).
I also configured JCo to R/3 backend and was able to extract the full list of our users, roles and profiles. But somehow background analysis job fails.
In job history table I see the following message: "Error while executing the Job:null", and in job log there is an entry, saying that "Daemon idle time longer than RFC time out, terminating daemon 0". But it's quite strange, as we use default values: RFC Time Out = 30 min, and daemons are invoked every 60 seconds.
Please, advise whether you had similar issues in your SAP environment and, if yes, how you resolved them.
Thanks,
Laziz

Hi Laziz
I am now just doing the first part of CC. May I know your details in how to configured Jco To R/3 Backend? Do you need to create any SM59 for connection T in R/3? If yes, I am lacking of the details to do that if you could help? Thank you.
Regards
Florence

Issue with background job--taking more time

Hi,
We have a custom program which runs as the background job. It runs every 2 hours.
Itu2019s taking more time than expected on ECC6 SR2 & SR3 on Oracle 10.2.0.4. We found that it taking more time while executing native SQL on DBA_EXTENTS. When we tried to fetch less number of records from DBA_EXTENTS, it works fine.
But we need the program to fetch all the records.
But it works fine on ECC5 on 10.2.0.2 & 10.2.0.4.
Here is the SQL statement:
EXEC SQL PERFORMING SAP_GET_EXT_PERF.
SELECT OWNER, SEGMENT_NAME, PARTITION_NAME,
         SEGMENT_TYPE, TABLESPACE_NAME,
         EXTENT_ID, FILE_ID, BLOCK_ID, BYTES
   FROM SYS.DBA_EXTENTS
   WHERE OWNER LIKE 'SAP%'
   INTO
   : EXTENTS_TBL-OWNER, :EXTENTS_TBL-SEGMENT_NAME,
   :EXTENTS_TBL-PARTITION_NAME,
   :EXTENTS_TBL-SEGMENT_TYPE , :EXTENTS_TBL-TABLESPACE_NAME,
   :EXTENTS_TBL-EXTENT_ID, :EXTENTS_TBL-FILE_ID,
   :EXTENTS_TBL-BLOCK_ID, :EXTENTS_TBL-BYTES
ENDEXEC.
Can somebody suggest what has to be done?
Has something changed in SAP7 (wrt background job etc) or do we need to fine tune the SQL statement?
Regards,
Vivdha

Hi,
there was an issue with LMT's but that was fixed in 10.2.0.4
besides missing system statistics:
But WHY do you collect every 2 hours this information? The dba_extents view is based on really heavy used system tables.
Normally , you would start queries of this type against dba_extents ie. to identify corrupt blocks and such:
SELECT owner , segment_name , segment_type
        FROM dba_extents
       WHERE file_id = &AFN
         AND &BLOCKNO BETWEEN block_id AND block_id + blocks -1
Not sure what you want to achieve with it.
There are monitoring tools (OEM ?) around that may cover your needs.
Bye
yk

URGENT HELP PLS : Issue with Multi Level Master Detail block

This is an issue someone else had posted in this forum few years back but there was no solution mentioned, I have run into this same issue , The problem is as explained below.
Any help on this is appreciated.
Scenario:
There are 3 Blocks in the form : A (Master Block)
: B (Detail of A )
: C (Detail of B )
There is master detail relation created between A and B and B and C. So initially when we query for a record in Master A, it shows all records properly in B and C.
Now if i navigate to the first record of B , and then second record of B , records corresponding to that record shows up properly in C block.
Till now everything works fine.
Issue 1:
But in case after querying initially on Master Block A,If I go directly to the second record of B block, it clears the whole B block and C block.
Issue 2:
Same thing happens if I am on C block ( corresponding to second record of B block) and then navigate to first record in B block , it again clears the whole B block and C block.
Please Help !!
Thanks !

Thanks Xem for Your reply , I tried those settings but it did not help..here is the original link that to the thread that talks about the same problem ,
Issue with Multi Level Master Detail block
The last update to this was the following :
"I figured out that this is happening because Block Status is set to 'Changed' and this is causing it to clear out the blocks.
But cant figure out why the status is setting to 'Changed' "
Any Help from the form Gurus on this form in this matter is truely appreicated !!
Thanks,
Zid.

HELP: SERIOUS ISSUES WITH BILLING

I have had serious issues with BT since joining their service. Without getting into the issues we had with the BT homehub and other things at the start of the contract with them here is what's been happening.
When we joined BT we explained that we wanted a monthly direct debit. Sounds simple enough but apparently not.
I have phoned over 6 times in the last year to change this. It has still not happened. Several times we were told that on the system it said monthly for it to be then taken out quarterly. In July while we were away this happened again. Only as we assumed that as they had informed us it would definitely be on monthly direct debit that it was the money for the whole of the quarter was not there. So when they took the money for a quarterly bill again. We were charged. It has set back other bills as the money had been eaten up by charges for this. As you can imagine we were quite annoyed. This was not our fault and we felt that BT were not capable of holding our account details without taking money they we repeatedly requested not to. I admit we should have kept a closer eye on our bills account but you don't think that a company will repeatedly do this to you.
After phone calls it emerged that they would not say more than a 'sorry' about this.
The saga then continued. I cancelled the quarterly direct debit at the back and have asked BT to send me monthly paper bills. Then last month our phone and internet was cut off.
We rang up and suggested that due to the mix up could they add the money we owed to our monthly bills and we'd pay this off on top of the monthly bill. Despite that the reason we owe this at all is not through any fault of our own but through theirs. The money would have been available had they taken it as repeatedly requested.
We were on the phone for 1hr and 10 mins ( 21st September) to three different people. No, they said must be paid in 10 day. My partner only managed to get money off this in about an hour - the point being we were happy to pay the whole amount over a year and were not allowed. We asked to speak to a manager after 1hr and 10 and were put back to the start of the queue. 16 minutes later the man we spoke to said a manager named Samantha would call us back. No-one did.
On the 22nd of september a rather annoyed me called back and repeatedly requested a manager - sadi would be put though. After 17 minutes the phone went dead.
Called later on same thing phone went dead after requesting a manager at 10 minutes.
Later on called for 28 minutes and told the call centre the issue £20 deducted from amount but said it had to be paid in ten days and a bill would be sent. Was told that the internet would be reconnected that day.
23rd September was hung up on after thre minutes on requesting why the internet had not been connected.
Phoned later. The man that I spoke to said that no action had been put through to reconnect the internet. He would do it and it would be through by 5pm.
My partner phoned at 8pm when the internet still had not been reconnected. It was done the next day.
Today BT phoned to ask if I had the bill ( Not sent) and tell me that the line will be disconnected by the end of the day. i explained that we were in the middle of complaints procedures with them. She looked on the system and said that there were no notes on the account. I asked for a manager and then asked for this managers superior. She put me through to someone that when questioned was not her superior and half way through my explanation of this....you guessed it..... the line went dead.
I am so annoyed that we've been fine with bill paying and as of their mistake we're now in debt to them and feel like we can't sort it out as there is not anyone who will listen or help. Has anyone had similar probelms or does anyone have a number for their English call centre?
Jess

hi Jess,
I am really sorry that you have had so much trouble trying to get this sorted out. I'll get this straightened out.
Could you drop me in an email please to the address in my profile with your BT account and telephone number along with a link back to this thread.
Cheers
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Need help troubleshooting issues with Adobe Reader X

Hello,
Recently our company upgraded multilpe computers to Reader X. Initially we installed version 10.1.0. Ever since our users on X have been experiencing problems. We are seeing three different issues.
1) A user will fill out the PDF and click print. At that point a popup appears with the message "Adobe Reader has encountered a problem and needs to close. We are sorry for the inconvenience." The user has the choice to click on Debug or Close. Clicking Debug doesn't appear to do anything.
2) Clicking on a PDF in internet explorer will launch Adobe Reader and a progress bar shows on the screen indicating that the PDF is loading. The progress bar goes away and the user is left looking at a grey screen.
3) When attempting to open a PDF the user recieves this message "The instruction at "0x00720065" referenced memory at "0x00720065" . The memory could not be "written."
In every situation the only way to get past the problems is a restart of the PC.
As an attempt to resolve the issue we tried upgrading several users to Reader version 10.1.3. This was done by completely uninstalling version 10.1.0 and then installing 10.1.3. This did not have any effect on the problems.
Can anyone here offer and suggestions?
Thank you

Hello,
1. The OS on which you are seeing these issues.
Windows XP SP3
2. The method of deployment of the 10.1.3 update. Was it done via SMS/GPO/SCUP?
Originally 10.1.0 was installed remotely using a program PSEXEC. Once the errors began occurring 10.1.0 was uninstalled manually and 10.1.3 was installed using a copy from your ftp site.
3. Can you try and update any one of your systems to the latest version of Reader i.e. Reader 10.1.4 and see if it solves the problem.
We have upgraded one machine to 10.1.4 using the Check for Updates function within Reader 10.1.3 and are looking for any ongoing issues.
4. Which browser are you using to render the PDFs. Is the issue seen with internal links alone or with all links. Can you try and see if the following opens on one of the faulty machine: http://kb2.adobe.com/cps/837/cpsid_83708/attachments/Acrobat_Reader_Re leaseNote_10.1.3.pdf<http://kb2.adobe.com/cps/837/cpsid_83708/attachments/Acrobat_Reader_ReleaseNote_10.1.3.pdf>
We are using IE 8. The issues are seen with both internal and external links as well as stand alone PDFs. No one could open the link you sent but we could open: http://helpx.adobe.com/content/dam/kb/en/837/cpsid_83708/attachments/Acrobat_Reader_Releas eNote_10.1.3.pdf on a faulty machine.
5. If suggestion# 3 doesn't work, can you also try and uninstall the installation on any one of the machines manually (i.e. via Control Panel > Add/Remove Programs or Programs and Features depending upon your OS) and install a fresh copy of Reader 10.1.3 (from ftp://ftp.adobe.com/pub/adobe/reader/win/10.x/10.1.3/en_US/AdbeRdr1013 enUS.exe<ftp://ftp.adobe.com/pub/adobe/reader/win/10.x/10.1.3/en_US/AdbeRdr1013_en_US.exe>) and see if it solves the problem. If it does, then it may be an issue with the Deployment methodology followed.
Already tried this. See answer to suggestion #2
Thanks,
Adam Behsmann
Application Support Analyst
Exchange Bank
(707) 541-1044

Please help! Issues with file permissions on the 'Edit' file created by LR for editing in Photoshop?

I am running a Macbook Pro with Mountain Lion. I use a Netgear ReadyNas as my storage device. I can Save, Re Save, Delete and add files without any concern on the ReadyNas from within PS or LR. However when I use the 'Edit in Photoshop" command on LR. I chose the 'Edit a copy with edits', LR creates the new duplicate 'edit' file in the same directory as the original. It opens in PS, I edit as required, however when I save the file to return to LR, I am informed that the file is locked and that I need to edit settings on file or folder, even though the settings are working for all other edits etc. I have had Netgear on this for 3 hours this evening and they cannot see any issues with the setting on the ReadyNas. Does anyone know what permissions are changed or why they are changing when the file is being created by LR?
Sorry bit of a long winded one - but I hope that all makes sense?

h264 is highly compressed and might be the reason your skimming isn't smooth, it may also take a bit more time to convert. I don't have to worry all that much about space so I haven't particularly tried it and can't say whether there are any drawbacks of doing so.
If you google 'mpegstreamclip tutorials', you will see quite a few tutorials you can look at, they do tend to be specific to one task which may not exactly fit in with what you are trying to do, but looking at a few might give you a better understanding of what some options do and when to use them if at all.

HELP: Mail issues with Leopard

I have been having an issue with Mail since I upgraded to Leopard. I am getting the following message when I wake my Mac from sleep:
There may be a problem with the mail server or network. Check the settings for account “[email protected]” or try again. The server error encountered was: The server “mail.mac.com” cannot be contacted on port 143.
Does anyone know why this might be happening? Mail seems to work fine otherwise...

I had update problems with my PowerBook G4 as well. In my case the update stalled at Writing Package Receipt-it was installing 4 packages so I am not sure which one failed-but about this Mac showed 10.5.2 version-however the receipts were not anywhere -either in Software Updates/Installed Updates or in Library/Receipts/boms or in Console Logs-therefore, I concluded that the Update was only partial. I was unable to update it to completion using the independently downloaded Combo updates. So........., I restarted with the install DVD and did an Archive and Install (it reverted back to 10.5), then ran Software Update. It installed 7 items some of them relating to iTunes, iWork, iLife, QuickTime etc, including the combo 10.5.2 updater. It took an hour or two but everything finally installed. After that I ran Software Update again and it installed the Graphic Update. Now everything is fine except Permissions Verify/Repair takes quite long.

Please help - performance issues with Lr 2.3

I really hope some user/s or Adobe support members could help me with tweaks/suggestions to improve Lightroom 2.3's sluggish performance on my computer.
First of all I have read about 100 different forum topics this morning, have used the forum search extensively and I cannot find any one topic which talks about different methods for improving performance. So I really have tried to find the answer before asking for help and I have done a lot of googling to try and find some simple answers but after all this reading I am more confused than when I started out.
Let me first explain what I am experiencing and I will try and be as detailed as possible.
1 - When I browse the library it is incredibly slow rendering the thumbnail previews. I found a topic which talked about degfragging the LR catalog using sqlite and contig, I did that and it made no difference to performance.
2 - I left my machine running an entire day to render the 1:1 previews thinking this would help me with the slow thumbnail issues but it made no difference. It is however faster now when I double click and image and get the immediate 1:1 preview :)
3 - I have turned off the Automatically write changes into XMP, suggested on another topic, that made no noticeable differences to performance either.
4 - A few months ago when I was still running 2.1 I found a topic either here or on Google that told me to delete the entire previews folders and let LR recreate them from scratch, I did that back then and that did not make any difference either, turned out to be 24 hours of waste time for me.
5 - I tried changing the following settings under catalog settings (has not improved anything):
size: 2048 Pixels
quality: High
automatically discard 1:1 previews: Never
6 - The only slow performance I am experiencing in LR is the thumbnails and this slows down my workflow dramatically. Everything else in LR seems to be quite fluid and usable and fast. I notice many users have complained about the slow thumbnails issues and I was praying that 2.3 was going to sort this out.
7 - I have also noticed that when scrolling up and down the thumnail list it sometimes uses more than 1 processing core and then sometimes not and then when I stop scrolling up and down the thumbnails and leave it alone for 5 seconds suddenly all 8 processing cores spike to around 50% usage with processing "something".
8 - I have tried making my thumbnail previews different sizes, also makes no difference really, unless I go to the smallest size and then it seems ok but then it's hard to see what's going on at all with thumbnails that small.
9 - Lightroom is only using up 1.1 GB of available memory so I do no think the slowness relates to memory and I am running my memory in a proper DDR3 configuration.
10 - I have tried playing with my graphics card settings (below) but it does not seem to help no matter what I try.
11 - Overall it "seems" that Lightroom is trying to re-render thumbnails continously, I know technically this may not be true but as an end user this is how it feels to me.
My computer specifications are as follows:
Intel i7 965 Extreme Edition (not overclocked)
Intel DX58 Smackover Motherboard
6GB DDR3 Ram (not overclocked)
GEForce 9800GT Video Card (with WHQL driver)
SATA 2 1TB Seagate Drives
Windows Vista X64 (SP1)
Lightroom 2.3 X64
NEC 30" Display running at 2560x1600 resolution
The way I have LR configured on my PC is as follows:
- Program files installed on main C drive which is a 250GB partition on a 1TB Seagate Sata 2 drive with 190 GB Free space all the time.
- Lightroom catalog is on my E drive which is a 1TB Seagate Sata 2 drive
- Camera Raw Cache is set at 10GB and resides on the same E drive as the LR catalog
- My E drive has 100GB Free Space
- I have tried tweaks to the video card settings to be Lightroom spe

Hi Don
Thanks for the reply, I have tried changing any/all settings on the card set to performance versus quality and still it has no effect. I just got the latest video driver for the GT9800 which was released on the 3rd of March and that has no effect either. I tried loading the 32 bit version of Lightroom without any improvement to speed on the thumbnails whatsoever so that rules out the possibility of it being something to do with 64-bit.
I read an Adobe knowledgebase article saying that the Nvidia control panel conflicts with certain Adobe software but they do not say how to turn it off and I also cannot even find the answer to that on Nvidia's forums either. So I still cannot say whether or not the Nvidia control panel is the problem because I cannot disable it.
I phoned a friend this morning who is running Lightroom 2.3 on a simple Core-2 Duo machine and his thumbnails render in half the time that mine do and my hardware is top of the range stuff in comparison so you can imagine my frustration with this thumbnailing issue. My friend also has an Nvidia card 8800GT I think.
I have spent so much time on this and I am no further to a solution and this blurry thumbnail issue is seriously messing with my eyes and it does not make for a very pleasant user experience.
What concerns me is that while Lightroom is idle and the machine is idle Lightroom is not doing anything in the background like rendering thumbnails. It only starts rendering them once I scroll down a page, no doubt by design but for more powerful machines there is a lot of processing ability going unused. The thumbnails on the filmstrip render a lot faster compared to grid view but their rendering state is also not retained and once I have scrolled past 100 images and then scroll back they are all blurry again and I have to wait for them re-render all over again. All this re-rendering of thumbs is a really big waste of time.
I also noticed something else interesting this morning, I opened task manager and left it open while I was scrolling thumbnails (continuous scrolling without waiting for them to render sharp) and only one core was being used to do this processing, I tested this multiple times and left it open while I scrolled through 5000+ images and only one core the whole time was being used. Only once I stopped scrolling and Lightroom began it's rendering of the thumbnails (about 10-15 seconds after stopping scrolling) did it only then start using multiple processors, I'm not sure if that has something to do with anything and memory wise I have 4.2 GB of available memory and Lightroom is only using about 425 Mb of memory.
I have changed the size of my thumbnails to below halfway on the slider and that made only a slight difference, although now they are so small on this 30" screen that I am now suffering even more eye strain as a result.
I am busy loading LR 1.x to confirm whether any of these behaviours existed back then and will report back.

Export of the book from Lightroom to blurb, issue with Backgrounds ' opacitty = overexposed

Hello,
I have Mac book Pro last generation.
While preparing the book with Lightroom, I used new proposed tool that I found very useful , to place photos as background with different type of opacity. After upload to Blurb some of these backgrounds have disappeared at all and some have very bright color (overexposed) , so I am afraid to launch the print . After export into Pdf, everything works correctly.
Please find enclosed two obvious examples, two print screens of pfd file and 2 prinscreent from the ecvivalent of the book Hylem & Mourad wedding at elyseephoto blurb page page 28, 42, 43(i add print screen also).
Please help me to solve the issue, maybe there are some installation to correct for the graphic backgrounds? Are there minimum opacity level?
Thank you in advance for your quick answer.
Kind regards,
Anna Akoun

In the top right hand corner of the Book Module under <Book > change from <PDF> to Blurb.
With Blurb selected you will get lo-res warnings when the resolution is too low. Later on you can change back to <PDF>.
See screen shot:
You would not get a lo-res warning if you used original images from your camera. But if you either use small JPGs, or you crop an image severely and then use it for a full page image, the image will be too small to be used.

Help! Issue with Adobe 8 and Microsoft 2007

Hello,
I'm hoping someone can help me. I recently installed Adobe 8 on a laptop running Microsoft 2007. When an email arrives with a word attachment, I double click on the attachment, click open, the word program opens rigth up but the document never appears. There is no error message, just no document. Previewing the document also works.
Excel attachments work fine. This issue just started happening after Adobe was installed this afternoon. Before that, we had no issues.
Does anyone have any ideas???
Any help/suggestions would be GREATLY appreciated!!!
Thanks!

That said, it's also incredibly boring and puts yet another arrow in the quiver for dual wield unholy (which is fast overtaking two-handed unholy for superior damage, thanks to Sudden Doom process and Runic Empowerment) by increasing spell-based damage instead of strike damage. I'd very much like to see this mastery switched out for something that specifically reinforces the two-handed play style, even if it's as simple as adding more physical damage to Scourge Strike based on high-end weapon damage. We have very available stock of [url=http://www.storeingame.com]RuneScape Gold[/url] on most of the servers and we can deliver your [url=http://www.rsfarming.com/]RuneScape Gold[/url] on the order in a short while. Want to have it? Select here, here all you want [url=http://www.gobuycheaprsgold.com]Cheap RS Gold[/url] beyond imagination, come [url=http://www.zyy.com]Buy WOW Gold[/url] for providing to you.

Weird issue with background image (Safari)

Just wonder if anyone can shed any light on this one....
Basically have a design in progress here:
http://www.hpwebdesign.co.uk/rachelworrall/index101.php
All was fine until I added the three images that fade into one another using the Ultimate Fade In slideshow script ( http://www.dynamicdrive.com/dynamicindex14/fadeinslideshow.htm )
When the page is initially loaded in Safari (5), the top section of the background image doesn't display - it starts just beneath the main content below the navigation.
The weird part is that it literally only takes a click of the mouse outside that Safari window to make it appear. A refresh, however, won't.
It seems fine in Firefox on a Mac, and the client didn't report any issue in IE.
Can anyone with Safari have a quick look and replicate that glitch? If not, then it might just be some weird local issue here.
Many thanks.

I've put up a couple of screenshots here:
http://www.hpwebdesign.co.uk/rachelworrall/screenshots.htm
Its like that in Safari 5.0.3 (and 5.0.4 which I've just updated.)
Again, it literally just needs a click out of the Safari window to make it appear correctly as per the second screenshot.
Its like this on a 27" iMac, but had a look on the macbook, and its fine on there.
So if it looks OK with anyone else, I'm just going to put it down to a weird glitch on my machine here.

Pl help - Screenshots issue with Adobe Reader 9

Please help me I am really stuck bad with the screenshot issue
We use WORD 2007 to make our User guides, these are converted to PDF. When we view the PDFs in Adobe Reader 9.2, screens are coming very hazy and blurred.
If I open the same PDF in Nitro PDF, or Acrobat Professional, the screens look much much better.
I've attached the screenshot, word file and pdf file for refrence

Thanks Bernd, I set 'Smooth Text' as NONE but still no luck
Can you please specify which settings are you referring to.
Thanks

I HAVE AN ISSUE WITH BACKGROUND IMAGE IN FIRE FOX ITS WORKING FINE WITH IE BUT WHEN I TRY O RUN IT WITH FIREFOX IT DOES NOT SHW ANY IMAGE.

HERE IS MY CODE
<html>
<body background="C:\Documents and Settings\Godara\Desktop\kufri (65).jpg">
<h1>Hello world!</h1>
</body>
</html>

Have you contacted Project VII support or searched their knowledge base?
http://www.projectseven.com/support/index.htm
Also, is there any way to remove unused styles (in an external CSS) in DW? Just it would be a pain to go through and remove the styles I've tried, but then later decided not to use.
Not exaclty a DW answer, but I've used the free FireFox add-on to help me find unused selectors. Point it to a sitemap.xml and it can spider the whole site (as listed in that xml file).
https://addons.mozilla.org/en-US/firefox/addon/5392
But be careful with it. It apparently doesn't read JavaScript and your PMM triggers are actually used.
Mark A. Boyd
Keep-On-Learnin' :-)
If you are reading this via email, be aware that it may not be an accurate representation of my message. Login to read the actual message and/or to reply.

Does the iPad 2 still have issues with light bleeding/yellowing?

Hi,
I placed an order for an iPad 2 back in April but cancelled the order when I heard about initial quality control issues such as light bleeding/yellowing. However, I am keen to buy a iPad 2. Could anyone who bought an iPad 2 more recently (say, since mid May) advise whether they too have had these issues? I can't afford to spend £500+ on a device that doesn't work like it's supposed to.
Thanks!
Tony

Hi there Tony!
All iPads should work as expected, to have a fault with one is usually a random, and rare event. Your iPad will probably be perfect, only a few out of a very large number have defects.
However, if your iPad does not meet your standards when you purchase it, I would take it to the local Apple Store. You receive a 1 year limited warranty, and they will be happy to replace it if any defects occur.
Hope that put your mind at rest.

HELP! Captive 6 issue with backgrounds bleeding

Similar Messages

Maybe you are looking for