Help commands not working

alter table rep_contracts add constraint rep_contracts_store_idquarterrep_id_pk primary key ( store_id , quarter , rep_id );
I get this as a return
Error starting at line 1 in command:
alter table rep_contracts add constraint rep_contracts_store_idquarterrep_id_pk primary key ( store_id , quarter , rep_id )
Error report:
SQL Error: ORA-00972: identifier is too long
00972. 00000 - "identifier is too long"
*Cause:    An identifier with more than 30 characters was specified.
*Action:   Specify at most 30 characters.
select constraint_name , constraint_type , search_type , search_condition , r_constraint_name from user_constraints where table_name = 'store_reps' ;
ORA-00904: "SEARCH_TYPE": invalid identifier
00904. 00000 - "%s: invalid identifier"
*Cause:
*Action:
Error at Line: 1 Column: 43
Please help my teacher for this class isnt providing any information.

913368 wrote:
alter table rep_contracts add constraint rep_contracts_store_idquarterrep_id_pk primary key ( store_id , quarter , rep_id );
I get this as a return
Error starting at line 1 in command:
alter table rep_contracts add constraint rep_contracts_store_idquarterrep_id_pk primary key ( store_id , quarter , rep_id )
Error report:
SQL Error: ORA-00972: identifier is too long
00972. 00000 - "identifier is too long"
*Cause:    An identifier with more than 30 characters was specified.
*Action:   Specify at most 30 characters.
select constraint_name , constraint_type , search_type , search_condition , r_constraint_name from user_constraints where table_name = 'store_reps' ;
ORA-00904: "SEARCH_TYPE": invalid identifier
00904. 00000 - "%s: invalid identifier"
*Cause:
*Action:
Error at Line: 1 Column: 43
Please help my teacher for this class isnt providing any information.
>alter table rep_contracts add constraint rep_contracts_store_idquarterrep_id_pk primary key ( store_id , quarter , rep_id );
I get this as a return
Error starting at line 1 in command:
alter table rep_contracts add constraint rep_contracts_store_idquarterrep_id_pk primary key ( store_id , quarter , rep_id )
Error report:
SQL Error: ORA-00972: identifier is too long
00972. 00000 - "identifier is too long"
*Cause:    An identifier with more than 30 characters was specified.
*Action:   Specify at most 30 characters.
select constraint_name , constraint_type , search_type , search_condition , r_constraint_name from user_constraints where table_name = 'store_reps' ;
ORA-00904: "SEARCH_TYPE": invalid identifier
00904. 00000 - "%s: invalid identifier"
*Cause:
*Action:
Error at Line: 1 Column: 43
Please help my teacher for this class isnt providing any information.
object names most be 30 or fewer characters
rep_contracts_store_idquarterrep_id_pk
123456789012345678901234567890
                  1                  2                  3Edited by: sb92075 on Feb 8, 2012 9:25 PM

Similar Messages

PSE 10 and Adobe CS6: When running silent install help is not working afterwards

Hello,
I'm not sure if this is the correct forum. If not: Please help me find the correct one.
I have a big issue with Adobe CS6 (and former versions like Photoshop Elements 10): When installing it from DVD running GUI everything is working fine afterwards. If I install e.g. Photoshop Elements 10 using "Silent Installation" help is not working afterwards. It states that it cannot locate the URL. I have not installed AIR and also do not plan to install it.
I have 'played' a little around with Common Files\Adobe\helpcfg and help directory. Now at least I do not get an error message but still it's not the online help which opens in the browser but the web page that is defined as 'home'.
The same I see now in Adobe CS6. I have e.g. packaged After Effects and Illustrator and when deploying it I'm not able to open help as well and I fear that this is the same issue.
Has anyone deeper knowledge about how "helpcfg" is working? Any example files? Any other help appreciated as well.
Kind regards
János

@hannilator Have you checked the exceptions folder contents for instructions on how to push to logged off computers? Here's what I get when I package CS6 (DesignWebPrem) and excude AIR/CHC:
After you have deployed the package, separately install the products in the exception folder.
IMPORTANT: Before you install the products in the exception folder, refer to the following Adobe Knowledgebase article for information on installing these products and configuring the settings correctly:
http://www.adobe.com/go/aamee_exceptions
NOTE: The installation commands provided below will work when the user is logged in to the client machine where the package is being deployed. For the scenario where the user is not logged in, prefix the following string to the command:
sudo launchctl bsexec `ps auwwx |grep [l]oginwindow | awk '{ print $2 }'`
As an example, here is the command to install "Adobe AIR" when the user is not logged in to the client machine (assuming Adobe AIR is part of the package):
sudo launchctl bsexec `ps auwwx |grep [l]oginwindow | awk '{ print $2 }'` Adobe\ AIR\ Installer.app/Contents/MacOS/Adobe\ AIR\ Installer -silent
###################################### Command to install Adobe Dreamweaver Widget Browser ######################################
Adobe AIR Installer.app/Contents/MacOS/Adobe AIR Installer -silent -eulaAccepted -programMenu WidgetBrowser.air
###################################### Command to install AdobeHelp ######################################
InstallAdobeHelp appVersion=4.0.244 appId=chc pubId=4875E02D9FB21EE389F73B8D1702B320485DF8CE.1 installerArg1=-silent installerArg2=-eulaAccepted installerArg3=AdobeHelp.air

Photoshop CS4 Extended ...Program's 'Help' does not work

I have PS CS4 Extended ... the Help command does not work ... I get a message saying "there was an error launching th eAdobe Help application. You may need to reinstall the application and Help component.
IK have un-installed the program completely and then reinstalled it. Still, the Help does not work, although the rest of the program seems to perform ok.
I'm rather at my wits end.
Has anyone any suggestions.
Thansk.

This won't fix your problem, but it might help as a workaround...
This is the page that normally opens when you click Help - Photoshop Help... in Photoshop CS4:
http://help.adobe.com/en_US/Photoshop/11.0/index.html
-Noel

Odi os command not working with agentservice agent.

dear all,
odi os command not working with agentservice agent but with local agent it work fine.. and user is administrator.
kindly solve it
Regards
Naseer

Hi,
you referred to oscommand, so are you executing a .bat fille? if yes, where exactly does the .bat file reside, local machine or on network share?
Also, follow these couple of documents, they may be helpful to you.
859215.1 and 424703.1
Regards
Srikanth

Illustrator Short Commands Not Working

Hi Team,
My illustrator CS6 short commands have stopped working.
Any time I try to use any CMD + Key, illustrator will not react.
This has been on going for a few months, I have tried resetting preferences but nothing has changed.
If someone could please help.
Thanks,
Brandon

Hi Jacob,
I have tried resetting preferences and few other options.
Anytime I press the CMD key the option at the bottom just changes from selection to direct selection, if that helps.
Should I uninstall and reinstall illustrator?
I no longer have my access key.
Thanks,
Brandon
Date: Wed, 8 Jan 2014 15:39:58 -0800
From: [email protected]
To: [email protected]
Subject: Illustrator Short Commands Not Working
    Re: Illustrator Short Commands Not Working
    created by Jacob Bugge in Illustrator - View the full discussion
THS,
You may try the following (you have tried/done some of them already) and see whether it helps (the following is a general list of things you may try when the issue is not in a specific file; 3) and 4) are specifically aimed at possibly corrupt preferences):
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press CtrlAltShift/CmdOptionShift during startup (easy but irreversible);
4) Move the folder Other options (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5994475#5994475
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5994475#5994475
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5994475#5994475. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Illustrator at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

WBS element field in transaction CS71-F4 help is not working in ECC 6.0

Hii
In SAP, while working in SAP 4.7, tcode cs71, WBS element is coming via F4 Help. But after upgradation to ECC 6.0 EHP 5, this F4 help is not working. I can enter value manually.but F4 help is not working.
Please Help.

Hi,
You can do it manually too
1. Choose function group 'CSDI' via Transaction SE80.
2. Choose screen '0260'in the 'Screens' area and switch to change mode
3. Choose the 'Element list' tab index.
4. In this area, choose the 'Reference' tab index and enter the value
    'PRP' in the 'Search help' column in the line for field
    'RC29N-PSPNR'.
5. Save your change and regenerate the screen.
6. The correct input help for the WBS element is now available in the
    initial screen of Transaction CS71/72/73.
I hope F4 helps works for "Existing WBS BOM's" in CS71 after this
Refer to Note : 714824 as well , it has reverted back the changes done by note : 422265
Regards
Gaurav

The 'Content, index, search' section of my help is not working in Mozilla

Dear All,
The 'Content, index, search' section of my help is not working in Mozilla.
I am using robo8 and mozilla 8. Any idea? please help...
Regards,
Jobin.

Dear William,
It is a webhelp
It is working in all other browsers except Mozilla.
It is a merged help...
waiting for your reply..:)
Regards,
Jobin.

F4 help is not working in IAC Iview

Hi,
There is IAC iview for transaction PA61
F4 help is not working for the iview
it workes in backend SAP PA61
kindly give any hints what can we check
thanks in advance
b

Hi,
This might be due to the JRE version of the browser. We faced such issue and the update of JRE version in the browser helps to get the pop-up of F4 help. Check in the internet broswser Tools -> Internet Option -> Advanced. Check whether the JRE applet is checked or not. it has to be checked. if it is checked and even if you dont get the F4 help, upgrade the JRE version.
Thanks,
Mahendran B.

Help is not working in Hyperion System 9 WebAnalysis

two months back we have installed Hyperion System 9.2.0.3 BI+ server and is working fine. however recently one user complained that WebAnalysis help is not working. we are getting "page cannot be displayed" when clicking on Help --> contents and index from WebAnalysis -- <a target=_blank class=ftalternatingbarlinklarge href="http://hostname:19000/WenAnalysis">http://hostname:19000/WenAnalysis</a> this is the direct link to the webanalysis help <a target=_blank class=ftalternatingbarlinklarge href="http://hostname:19000/workspace/docs/en/wa_user/frameset.htm?/workspace/docs/en/wa_user/launch.html">http://hostname:19000/workspac...n/wa_user/launch.html</a> Do you know how to fix this?

Hi Friends,
I am working on Sandbox Server, in that Help (F1) is not working. When i try to click F1 system is opening the popup and showing the following message-
The page cannot be displayed
Plz help
Regards
Goutham

With input disabled field search help is not working.

Hi Web dynpro abap Gurus
Please help me on below requirement.
If i make a input field disable then the attach search help is not working. Is there is any way by which
I can make input field disabled and search help will also work for this field.
I really need help on this, Please help me.
Many thanks in advance.
Sandeep Sharma
09971995045

Hi
I dont think that a field can be disabled and allows to choose data using f4 simultaneously. you can enable the field and allow the user to select whatever he/she wants.
Then in any action like on press of save or submit button which the user will trigger after entering the values, get the value entered by the user in that perticular field and fire a query on the table/view, which you have used as selection method of your search help, it help is coming from data element then look for check table in domain. if sy-subrc comes 0 than go ahead else give error that value selected is modified.
Thanks
Vishal

F1 help does not work in transaction SE80

Hi Experts!
A strange error occurred in our ECC 6.0 SR3 system (Windows 2003 SE 64 bit based, MaxDB 7.6.03.009). F1 help does not work in transaction SE80. Either nothing is shown when a keyword as SELECT is marked and F1 key is pressed, or a strange popup appears with title u201CABAP Keyword Documentationu201D and root u201CHit List of Index Searchu201D - [screenshot|http://i43.tinypic.com/aox7d.jpg]. No matter what I choose in the tree it always closes, no help is displayed and SAP GUI returns in the main screen in transaction SE80.
I found this thread [Re: SAP F1 Help and SE80 issue|Re: SAP F1 Help and SE80 issue] but it did not help me. This is my system information:
SAP PC VERSION INFORMATION: saplogon.exe
MAIN MODULE INFORMATION:
   saplogon.exe
   SAP Logon за Windows
   Final Release 710
   7100.3.12.1042
   1046700
SYSTEM INFORMATION:
   Operating system: Microsoft Windows XP 5.1 (2600) Service Pack 3
   Internet Explorer v. 7.0
Application help works perfect - I checked the configuration in transaction SR13 too.
Any ideas will be appreciated!
Thanks!

Hi Presu,
As it is seen from my previous post SAP GUI version is 7.10 SP 12. I downloaded the last SP 13 and installed it. Now SAP GUI information looks like this:
SAP PC VERSION INFORMATION: saplogon.exe
MAIN MODULE INFORMATION:
   saplogon.exe
   SAP Logon за Windows
   Final Release 710
   7100.3.13.1045
   1063164
The problem is not resolved.
This happens from different workstations with different versions and sub-versions of SAP GUI, so the problem is not caused from the GUI I think. It happens using different logon users and in all SAP system cliens.
Any other suggestions?
Best regards,
Pit

Alt ctrl c shortcut command not working in photoshop cc, it is opening Internet explorer (IE)

In Photoshop CC 2014 Alt + Ctrl + C ( to open for canvas size dialog box ) command not working, it is opening Internet Explorer (IE)

What version of windows are you using?
See if the Internet Explorer shortcut has that keyboard shortcut assigned to it.

Bash commands not working after upgrade to Lion

After upgrade, many BASH commands not working. For example, such a fundamental thing as "ls".
iMac20:bin a$ ls
Launch of "ls" failed: the PowerPC architecture is no longer supported.
What does it have to do with PowerPC? My computer is 2.66 GHz Inter Core Duo

Linc,
iMac20:~ a$ which ls
/sw/bin/ls
Also, I managed to look (using tcsh's ls-F command) into the contents of /usr/. Here's what I see there:
[iMac20:/bin] a% ls-F
[*          csh*        echo*       ksh*        mkdir*      rcp*        stty*       wait4path*
bash*       date*       ed*         launchctl* mv*         rm*         sync*       zsh*
cat*        dd*         expr*       link*       pax*        rmdir*      tcsh*
chmod*      df*         hostname*   ln*         ps*         sh*         test*
cp*         domainname* kill*       ls*         pwd*        sleep*      unlink*

Why is my BDC_CURSOR command not working to position the cursor?

Why is my BDC_CURSOR command not working to position the cursor? Here are the details regarding my issue.
I am writing a BDC to mass delete routing material assignments using transaction CA02. I am OK to navigate through the initial screen to go to the Header screen and from here I am OK to navigate to the Material Assignments screen. But once here, I cannot get the BDC_CURSOR command to take me into the list. Here are the commands I am using. Please let me know what I may try differently.
CA02 Material Assignment - Set position <-- this resets list of materials to correct position
PERFORM bdc_dynpro USING 'SAPLCZDI' '1010'.
PERFORM bdc_field USING 'BDC_CURSOR' 'RC27X-ENTRY_ACT'.
PERFORM bdc_field USING 'BDC_OKCODE' '=ENT1'.
PERFORM bdc_field USING 'RC27X-ENTRY_ACT' c_position.
CA02 Material Assignment - Delete
PERFORM bdc_dynpro USING 'SAPLCZDI' '1010'.
PERFORM bdc_field USING 'BDC_CURSOR' 'MAPL-MATNR(01)'. <-- this is not working to set the cursor into the list
PERFORM bdc_field USING 'BDC_OKCODE' '=LOE'. " trash can
PERFORM bdc_field USING 'RC27X-ENTRY_ACT' c_position.
CA02 Material Assignment - Green Check OK
PERFORM bdc_dynpro USING 'SAPLCZDI' '1010'.
PERFORM bdc_field USING 'BDC_CURSOR' 'RC27X-ENTRY_ACT'.
PERFORM bdc_field USING 'BDC_OKCODE' '=BACK'. " check mark
PERFORM bdc_field USING 'RC27X-ENTRY_ACT' c_position.

Thank you for your reply.
I had used SM35 to record. However, I was not aware of the "create program" feature. I had commented out a section from my previous post which I have now added back (latest code below). But it still did not resolve the issue.
When I execute with dismode = 'N', I get back error message "No batch input data for screen SAPLCZDI 1010".
When I execute with dismode = 'E' (only show dynpros when error), it stops at the material selection screen without placing my cursor in the list. I can then MANUALLY click to set the cursor position in the list, MANUALLY click the trashcan, it then uses my BDC command to respond to the popup asking "Do you want to delete", still leaving me at the material selection screen. I can then MANUALLY click the green check (or enter), then it continues with the BDC to go back to the previous screen, and saves. But it still will not place my cursor in the material selection list (SAPLCZDI screen 1010).
Here is code used. It is the second section of code labeled "CA02 Material Assignment - Delete" that is not working.
CA02 Material Assignment - Set position
this code functions to position the desired material to first in screen list
PERFORM bdc_dynpro USING 'SAPLCZDI' '1010'.
PERFORM bdc_field USING 'BDC_CURSOR'
 'RC27X-ENTRY_ACT'.
PERFORM bdc_field USING 'BDC_OKCODE'
 '=ENT1'.
PERFORM bdc_field USING 'RC27X-ENTRY_ACT'
 c_position.
CA02 Material Assignment - Delete
PERFORM bdc_dynpro USING 'SAPLCZDI' '1010'.
PERFORM bdc_field USING 'BDC_CURSOR'
 'MAPL-MATNR(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
 '=LOE'. " trash can
PERFORM bdc_field USING 'RC27X-ENTRY_ACT'
 c_position.
Acknowledge Pop-Up Screen
PERFORM bdc_dynpro USING 'SAPLSPO1' '0100'.
PERFORM bdc_field USING 'BDC_OKCODE'
 '=YES'.
CA02 Material Assignment - Green Check OK
PERFORM bdc_dynpro USING 'SAPLCZDI' '1010'.
PERFORM bdc_field USING 'BDC_CURSOR'
 'RC27X-ENTRY_ACT'.
PERFORM bdc_field USING 'BDC_OKCODE'
 '=BACK'. " check mark
PERFORM bdc_field USING 'RC27X-ENTRY_ACT'
 c_position.

Help button not working on firefox.How to fix?

help button not working.

Hello,
Lets give Firefox some Tuneup.
The Refresh feature (called "Reset" in older Firefox versions) can fix many issues by restoring Firefox to its factory default state while saving your bookmarks, history, passwords, cookies, and other essential information.
'''''Note:''' When you use this feature, you will lose any extensions, toolbar customizations, and some preferences.'' See the [[Refresh Firefox - reset add-ons and settings]] article for more information.
To Refresh Firefox:
# Open the Troubleshooting Information page using one of these methods:
#*Click the menu button [[Image:New Fx Menu]], click help [[Image:Help-29]] and select ''Troubleshooting Information''. A new tab containing your troubleshooting information should open.
#*If you're unable to access the Help menu, type '''about:support''' in your address bar to bring up the Troubleshooting Information page.
#At the top right corner of the page, you should see a button that says "Refresh Firefox" ("Reset Firefox" in older Firefox versions). Click on it.
#Firefox will close. After the refresh process is completed, Firefox will show a window with the information that is imported.
#Click Finish and Firefox will reopen.
Did this fix the problem? Please report back to us!
Thank you.

Help commands not working

Similar Messages

Maybe you are looking for