Help Creating Dynamic Stacked Column Chart with Multiple Criteria

Hi all. Im new here and hoping you can help. I have a dashboard Im trying to rebuild from scratch (our computer had a meltdown and we lost all our files). I did not build the dashboard initially so Im trying to recreate it from the flash file we were able to recover. I have come across a chart that I just cannot figure out how to do. I can figure out how to write an array in the Excel sheet that pulls the data into a table the way I need it to be but found out after I wrote that that Xcelcius doesn't support arrays so all my data disappears when I go into preview mode (which is especially frustrating since I can see the chart working fine in design mode). Anyway this is what the data table looks like
Month         Year            Company      Positive #          Negative #         Neutral #          Positive %       Negative %      Neutral %
October      2011            CompanyA      1234                1234                 1234                 10                    10                    10
October      2011            CompanyB      1234                1234                 1234                 10                    10                    10
October      2011            CompanyC      1234                1234                 1234                 10                    10                    10
October      2011            CompanyD      1234                1234                 1234                 10                    10                    10
November 2011            CompanyA      1234                1234                 1234                 10                    10                    10
November 2011            CompanyB      1234                1234                 1234                 10                    10                    10
November 2011            CompanyC      1234                1234                 1234                 10                    10                    10
November 2011            CompanyD      1234                1234                 1234                 10                    10                    10
December 2011            CompanyA      1234                1234                 1234                 10                    10                    10
December 2011            CompanyB      1234                1234                 1234                 10                    10                    10
December 2011            CompanyC      1234                1234                 1234                 10                    10                    10
December 2011            CompanyD      1234                1234                 1234                 10                    10                    10
The original chart was built so that you would choose the month from a combo box and then the company names would show up along the X axis with their % amounts shown in the stacked column. I know how to make a combo box work and I know how to make a stacked column chart work with static data. I cannot for the life of me figure out how to get it to work so that when you choose the month from the combo box it filters the data. I've tried filtered rows but I'm just missing some information that makes it work and I can't figure out what that information is. It has to be able to get the month/year combo from the combo box and then go to the table, filter it by month and year and then create a multi-row table of data with just the company and the percent values. Any help would be greatly appreciated!

Which connection you are using?
IF quite difficult if you are working under static data.

Similar Messages

Drill Down between 2 stacked column chart with multiple rows.

Hi,
Can anyone please help me.
1) i have to create stacked column chart with Region and cout of calls for previous 3 quarters.
2) the 2nd stacked column should display the priority with the count of calls for the respective selection of region on the 1st chart..
to achieve this,
i'm using 2 stacked column charts and 1 lebel baseb menu.
from this i can able to get the drill down from label based menu to 2nd stacked column chart but i couldn't able to done the same from 1st stacked coumn chart.
Becoz my data is multiple row for each quarter.
please suggest me to achieve the drill down between 2 stacked column charts.
assume that my data like below.:
coulmns for 1st stacked column chart : Region, Q2,Q3 &Q4
Region                Q2                Q3               Q4
Other              3658              3497               497
NA - North
America                3               3               1101
APJK     1     4     597
UK               324
EMEA North     1     1     288
CORPORATE     1     5     215
LA -
Latin America1     2     208
EMEA     1          199
EMEA South     1     1     169
Coulmns for 2nd coumn chart: Region, Priority, Q2,Q3,Q4 ()which is derived from 1st table.
Region     Priority     Q2     Q3     Q4
Other     D: End of Next Day     1568     1613     239
Other     C: End of Day     983     893     119
Other     A: 2 Hour     631     610     70
Other     B: 4 Hour     396     318     56
NA -
North AmericaD: End of Next Day     2     2     514
APJK     D: End of Next Day          3     297
NA -
North AmericaC: End of Day               284
NA -
North AmericaA: 2 Hour     1          170
UK     D: End of Next Day               157
APJK     C: End of Day     1     1     152
Other     E: 3 - 5 Business Days     68     58     13
EMEA North     D: End of Next Day          1     136
CORPORATE     D: End of Next Day          4     107
NA - North America     B: 4 Hour          1     104
LA - Latin America     D: End of Next Day     1     1     86
EMEA     D: End of Next Day               86
UK     C: End of Day               85
APJK     A: 2 Hour               79
EMEA South     D: End of Next Day               72
EMEA North     A: 2 Hour               69
EMEA North     C: End of Day               56
APJK     B: 4 Hour               55
EMEA     C: End of Day     1          53
LA - Latin America     C: End of Day               54
UK     A: 2 Hour               49
EMEA South     C: End of Day     1          44
CORPORATE     A: 2 Hour          1     43
CORPORATE     C: End of Day               44
LA - Latin America     A: 2 Hour          1     42
EMEA South     A: 2 Hour          1     32
EMEA     B: 4 Hour               30
UK     B: 4 Hour               30
EMEA     A: 2 Hour               27
EMEA North     B: 4 Hour     1          26
NA -
North AmericaE: 3 - 5 Business Days               25
LA - Latin America     B: 4 Hour               23
EMEA South     B: 4 Hour               20
CORPORATE     B: 4 Hour               17
APJK     E: 3 - 5 Business Days               13
Other     F: 6 - 10 Business Days     6     4
Other     G: 11 - 20 Business Days     6     1

Hi Srinivas,
I'm using label based menu "filterd rows" only but i couldn't bind the drill down with the 1st stacked column chart.
for mor details:
1) i'm having 2 stacked coumn charts & 1 lebel based menu but eventhough i couldn't able to achieve.
if i select the lebel based values then the 2nd stacked column charts is giving detailed valus but if i keep my mouse on the 1st stacked column chart the there is no changes on the 2nd chart..
somewhere i'm mising the binding data between 1st stacked coumn chart & lebel based menu on drill down part.
Becoz i'm having multiple rows. so can you please try your and send me the xlf file using your concept.

Stacked Column Chart with Lines

Requirement:
User stacked Column chart to display data for defects for 4 departments.
1 or 2 lines to show baseline for defects(constant).
Is there anyway that I can do that just like we can create one in Excel?
(stack a Stacked column chart with a line chart is not a solution.)
Any advises?
Thanks,
Wen

Hi Wen,
I realise that you are not going to get this to work with a standard component on its own. I think it might be possible to acheive it with overlaying barcharts and combination charts.
My assumption is that you are looking for something that has a stack with 3 separate items in it. Two target lines crossing over the stacked chart.
I will have a look at this to see if I can come up with something. Let me know if this is not your requirement.
No, I don't work for SAP. I think those that do have the SAP logo beside them.
Regards
Alan

Stacked Column Chart with Line

Hi
I need to Create a Stacked Column Chart representing 1 set of measures with a Line representing a target.
I want to create a chart where the Sales Amount in different Sectors is represented as a stacked column and the targets are represenetd as a line.
Currently BO supports Bar charts with line.
Does anyone know if such a feature will be supported in the new release of BO XI. Also is it possible to raise a request for this feature to be included in the new release
TIA

We are also a 30 persons department (Marketing) using in the same BO charts (since 2001) quarters made of :
- first single column ( 2014 billing in a query1)
- second stacked column (2015 billing +2015 firm orders backlog, 2015 frame orders backlog in a query2)
- third single column (2016 backlog in a query3)
and a superposed budget line
the first and the third column are offset respectively to the left and right of the second column by blank and dummy single columns of data called ghost1 and ghost2. 2016 is still empty here but the principle is clear.
This principle is used liberally in 200 + different reports. Also with transparent columns and other complicated, but graphically intuitive reports.
How can we continue to use this very natural representation of our several hundred million $ business. I have not found the mixed single column, stack column and line option in BO XI 3.1 . Please re-develop one asap if necessary. SAP should please please report asap on the recovery timeline of this lost feature. The switch from Visual Basic development to Java development should not lead to regression of any feature.
Regards.
Jean-Marc Imbert
Marketing manager

How do you combine a stacked column chart with a clustered column chart

Hello,
I am trying to combine a stacked column chart with a clustered column chart. I know that in Excel there is a way to trick that described on the next site: http://people.stfx.ca/bliengme/ExcelTips/Columns.htm
Is that possible with BI Publisher?
Thank you very much!
Codruta Crisan

Finally I get it myself:
You need to use graph type as BAR_VERT_STACK2Y and the declare the series that you want to see on the first Y vertical bar as assignedToY2="false" and the ones that you wanr to see on the second Y vertical bar as assignedToY2="true".
In my case I use 4 Series, 2 stack on the first clustured column and 2 stacked on the second (2Y) clustured colum....see below
graphType="BAR_VERT_STACK2Y">
<SeriesItems>
<Series id="0" assignedToY2="false" color="#BBD6E7"/>
<Series id="1" assignedToY2="false"/>
<Series id="2" assignedToY2="true" color="#004A96"/>
<Series id="3" assignedToY2="true"/>
</SeriesItems>

Stacked Bar Chart with Multiple Series Sort Question

Hi,
Apex version 4.1.1
I have a stacked bar chart with three separate series, one showing customer effort, another showing project effort and the third showing other effort, summarized by calendar week. The x-axis of the chart is the calendar "week of" date, and the y-axis has a bar for each of the three series. Not every type of effort occurs every week.
When AnyChart renders the chart, the order of entries on the x-axis seems to be dependent both on which series are present in a given week as well as the "week of" date. Weeks with all three series sort in order by calendar date, followed by weeks where just the 2nd & 3rd series are present, followed by weeks where just the 3rd series is present. See this [url http://tinypic.com/r/b9zdt/6] picture of the chart noting the "week of" dates. Note that the months go Sep-Oct-Nov-Aug-Oct.
Is there a way to force AnyChart to sort the x-axis in chronological order regardless of whether there is data for all three series for a given week? I have looked through the AnyChart XML reference but cannot find a way to do this.
Incidentally, I can solve the sorting problem by combining all three series into a single query:
select
null as link,
week_of as label,
sum(customer_effort) as "Customer Effort",
sum(project_effort) as "Project Effort",
sum(other_effort) as "Training, Admin and Other Effort"
from ...But if I do this, I cannot figure out how to have each bar on a given week link to a different detail page, e.g., if I click on a bar representing customer effort I want to link to one page, but if I click on a bar representing project effort, I want to link to a different page. I have had a look at the [url http://apex.oracle.com/pls/apex/f?p=36648:59:1570983160946101::NO:::] chart examples posted on apex.oracle.com, but cannot figure out how to apply to multiple series in a single query.
Thanks,
Mike

Thanks, Jeff. I did try this but for whatever reason it doesn't make a difference. I think it is because if there's no data for a given series for a certain week, there is no entry in the data set that is sent to AnyChart.
I was able to get around the issue by "filling in" the missing weeks from each data series. To generate the list of "Week Of" dates for a given date range, I used this code:
select
     trunc (each_day) as week_of,
     0 as effort
from (
     select
          (to_date(:p920_start_date,:app_date_format) + 2 - to_char(to_date(:p920_start_date,:app_date_format),'D') - 1) + level each_day
     from dual
     connect by level <= to_date(:p920_end_date,:app_date_format) - to_date(:p920_start_date,:app_date_format) + 1
where
     to_char (each_day, 'D') = '2'This creates an effort entry of 0 for each week within the date range; I use the Monday date of a week as the "Week Of" date. I then union this with my actual data and summarize by week and viola, I get the weeks in order. This also has the benefit of showing a week for which there are no entries in any of the three series.
Thanks for taking a look at this.
Mike

Column Chart with Multiple axes

Hi folks
I am using flex 2 charts for displaying data. I want to show my data using column chart with secondary axis. However columns for multiple series are coming one over another. here is the code I have attached:-
But I want to put columns side by side. Any thoughts will be appreciated.
Warm Regards
Rush-me

Any thoughts?
Warm Regards
Rush-me

Stacked column chart from XML data source

I have an XML file, which lists elements with three
attributes: date, inactive-interval, user-count.
I need to build a stacked column chart with a single column
for each distinct date, one stack for each distinct
inactive-interval for that date, and the height of the stack equal
to the user-count.
I can define ColumnSeries with yField="user-count"
xField="date", but I don't know how to partition the column into
stacks by inactive-interval values.
Here is a sample data set:
<?xml version="1.0" encoding="ISO-8859-1"?>
<data>
<snapshot date="01/01/2007" inactive-interval="0"
user-count="3"/>
<snapshot date="01/01/2007" inactive-interval="7"
user-count="2"/>
<snapshot date="01/01/2007" inactive-interval="30"
user-count="4"/>
<snapshot date="01/02/2007" inactive-interval="0"
user-count="4"/>
<snapshot date="01/02/2007" inactive-interval="7"
user-count="2"/>
<snapshot date="01/02/2007" inactive-interval="30"
user-count="3"/>
</data>

Your CategoryAxis id="ha_ccm" uses categoryField="period", and this is the label for the your series (i.e. "Quarter 4/2010"). You cannot have multiple categoryFields for the CategoryAxis; it can only use one data field for the labels. You can use data tips and/or label functions to show the individual series' values on the columns.
Also:
Your labelField in the ColumnSeries are set to a ColumnSet name instead of a field name in your dataprovider.
Font must be embedded if you set ColumnChart.showLabelVertically="true".

Numbers Charts: Stacked bar chart with two sets of data

Hi....newbie with first post
I'm trying to create a stacked bar chart with two lots of comparative data.
So, there is Basic + Overtime for April 2010 as one stack (ie the basic is one colour, stacked on top is the overtime in a different colour)
Basic + Overtime for April 2011 next to it.
I can get April figures next to one another as four separate columns (2 x basic, 2 x overtime), or I can get all four figures in a single stack, but I can't to two columns (one for each year) of basic and overtime.
Any ideas?

UK,
What you are trying to do will require that you interleave the two sets of two-series data into one longer two-set series, and then plot just the one pair of series. Clear as mud?
What I'm saying is that you have to fake out the program into thinking that you have just two sets, not four.
You will have one series that has, for instance Apr 2010 Basic, Apr 2011 Basic, May, 2010 Basic, May 2011 Basic, etc.. This other series in that chart will have Apr 2010 Overtime, Apr 2011 Overtime, May 2010 Overtime, May 2011 Overtime, etc.
The bad thing here (I'll anticipate your first complaint) is that 2010 and 2011 data will have the same color for Basic and another color will be assigned for both 2010 Overtime and 2011 Overtime.
To get separate color sets for 2010 and 2011 data pairs, you will have to create two charts and overlay them. Both charts would be built in the alternating year format described above, but in one chart all the 2010 data would be blank and in the other chart all the 2011 data would be blank, leaving spaces in the chart for the data from the other chart to nest in.
Jerry

Stacked Column Chart (Total and Combination Chart)

Hi,
I tried to find the answer at old posting, but failed to find proper solution.
So here I go again with the same old problems:
1. Any method / trick to display total on top of each stacked column ?
    (Label is not an option, since it is static and will not move following the height of the stacked bar).
2. Any method / trick to combine stacked column chart with line chart ?
    (Overlay is not an option, because I think it is too tedious to play around with color and border)
Thanks for the bandwidth.
Regards.
NB: Are there any XCelcius add-on for those 2 functions ?

Hi Yudie,
Can you get compromised in the following way ?
In the X Axis labels, you can get the values concatenated dynamically and displayed. Example given below:
2008          2009          2010
P180         P250         P280
A172        A263         A265
Whereas P denotes to Plan and A denodes Actuals. Above to this labels stacked colum wil be there as usual.
Consider and revert, in case you need any more clarification on this.
Keep posting.
With best wishes
BaaRaa.
Edited by: Baskar Rajagopalan on Feb 23, 2011 3:36 PM

Decimal Point data for Stacked Column Chart

Hi,
I use a basic version of a Column chart for one of my projects. I use a stacked column chart with 2 data series namely "Expenses" & "Profit".
I use decimal point numbers (with only two or three places after the decimal point) for both series.
When I mouse over the bars of the output for tool tip, I view more numbers after the decimal point for some data.
How to fix the decimal point to only 2 places & what is the reason for this behaviour?
Attached is the sample output (output.gif) showing the above condition for the mentioned data.
-Sen

Create an toolTipShow event handler and use a NumberFormatter to set the precision of the numbers (sample code from LiveDocs):
<?xml version="1.0"?>

<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml">
    <mx:Script>
        <![CDATA[
            // Define variable to hold the number.
            [Bindable]
            private var bigNumber:Number = 6000000000.65;
        ]]>
    </mx:Script>
    
    <mx:NumberFormatter id="PrepForDisplay"
        precision="0"
        rounding="up"
        decimalSeparatorTo="."
        thousandsSeparatorTo=","
        useThousandsSeparator="true"
        useNegativeSign="true"/>
    
    <mx:TextInput text="{PrepForDisplay.format(bigNumber)}"/>
</mx:Application>

Creating SVG Chart with multiple lines

Hi All,
I want to create a chart with multiple lines.
Ex: I have one emp table with empno, sal and deptno columns.
I want to print deptno in x axis and no of employees on y axis.
I want to print one line for employees with sal > 15000 and one more line for employee with sal =< 15000
So one line will show no of employees with sal more than 15000 for each dept. Similar case for the other line and these 2 lines should be in different colors.
For one line the query will go as
select link, deptno, count(empno)
from emp where sal > 15000 group by null, deptno
Is this possible to draw this chart?
Thanks,
Manoj

I wasn't able to do something like what you describe, but I was able to do this:
I defined column A of the table as a Header Row, selected the cells in the table, and chose this chart type (2D 2 Axis):
Then I clicked the chart and in the pane at the right checked 'Axis Name' in the Axis tab and added the axis names.
Maybe this can give you an idea of how you can illustrate the relationships that you want to show.
SG

Is it currently possible to create a doughnut chart with multiple concentric circles in SSRS?

Is there currently any way to create a 'doughnut' chart with multiple concentric circles in an SSRS report (any version), without using 3rd party tools?
Something like this, perhaps?
(For that matter is it possible to create this using JavaScript? It's my understanding that this image was originally created in a web app using JavaScript. So far I've not been able to pin down the details. I've found hints that JavaScript
can be used in SSRS reports but so far no clear working examples.)

Hi B.Chernick,
According to your description, you want to create a create a doughnut chart with multiple concentric circles in your report. Right?
In Reporting Services, we only have doughnut chart with one concentric circle. All the category group is in that concentric circle. Though we can embed javascript injection in expression, it only give the css style to values or report
items which can change the looking. It can't change the structure of the report items itself. So your requirement can't be achieved current.
For your requirement, we suggest you provide Microsoft a feature request at
https://connect.microsoft.com/SQLServer
so that we may try to expand the product features based on your needs.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Help - How do I Add a Trendline to a Stacked Column Chart??

I have a stacked column chart (NOT a 100% stacked column chart) and need to add a line to show the year goal. I can do this in Excel, but for some reason can't figure out how to do this in SSRS. I read various tutorials, blogs and MSDN pages
but nothing works. The weird thing is that they all say that I should right-click on the chart and there should be a DATA tab...on the chart properties. THERE IS NO DATA TAB, i'm here to tell you. I'm using SQL 2012 so not sure if that might make
a difference.
So how do I do this?
Again, this can be done in Excel, don't understand why this isn't easier to do in SSRS.
BTW, completely separate rant here, but it takes me 20 minutes every single time I want to log into MSDN forums. It never seems to remember my password and I have to reset it, then jump through a bunch of security nonsense. Anyone else have this
problem?
Thanks!!

Hello,
If I understand correctly, you want to add a line chart to display the Goal values in the stacked column chart. You can try to add the secondary field to the Values area and change the chart type to "Line". Both data field in the Values area
shares the Category group and series group. Please refer to the following screen shot:
If I have any misunderstanding, please post your report dataset with sample data for further analysis.
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support

Different sort order with line chart and stacked column chart

Hi,
I have a problem with sorting within flash charts.
The chart should be ordered by a date column.
If I'm using a line chart everything is fine. The columns in the chart are in the same order as returned by the query.
If I change the chart type to stacked column chart, I get a wrong order.
It is orderd like 5, 6, 7, 8, 9, 10, 1, 2, 3, 4.
What's wrong?
Here the query i use:
SELECT NULL AS link,
TO_CHAR (zeitpunkt, 'dd.mm.yyyy'),
MAX (DECODE (db_sid, 'TI06E', VALUE, NULL)) OVER (PARTITION BY zeitpunkt) AS "TI06E",
MAX (DECODE (db_sid, 'TI06T', VALUE, NULL)) OVER (PARTITION BY zeitpunkt) AS "TI06T",
MAX (DECODE (db_sid, 'TI14S', VALUE, NULL)) OVER (PARTITION BY zeitpunkt) AS "TI14S",
MAX (DECODE (db_sid, 'TI14T', VALUE, NULL)) OVER (PARTITION BY zeitpunkt) AS "TI14T",
MAX (DECODE (db_sid, 'TI16T', VALUE, NULL)) OVER (PARTITION BY zeitpunkt) AS "TI16T",
MAX (DECODE (db_sid, 'TI24K', VALUE, NULL)) OVER (PARTITION BY zeitpunkt) AS "TI24K",
MAX (DECODE (db_sid, 'TI33T', VALUE, NULL)) OVER (PARTITION BY zeitpunkt) AS "TI33T",
MAX (DECODE (db_sid, 'WF03E', VALUE, NULL)) OVER (PARTITION BY zeitpunkt) AS "WF03E",
MAX (DECODE (db_sid, 'WF03K', VALUE, NULL)) OVER (PARTITION BY zeitpunkt) AS "WF03K",
MAX (DECODE (db_sid, 'WF03T', VALUE, NULL)) OVER (PARTITION BY zeitpunkt) AS "WF03T",
MAX (DECODE (db_sid, 'WF05K', VALUE, NULL)) OVER (PARTITION BY zeitpunkt) AS "WF05K",
MAX (DECODE (db_sid, 'WF05T', VALUE, NULL)) OVER (PARTITION BY zeitpunkt) AS "WF05T",
MAX (DECODE (db_sid, 'WF06T', VALUE, NULL)) OVER (PARTITION BY zeitpunkt) AS "WF06T",
MAX (DECODE (db_sid, 'WF07K', VALUE, NULL)) OVER (PARTITION BY zeitpunkt) AS "WF07K",
MAX (DECODE (db_sid, 'WF07T', VALUE, NULL)) OVER (PARTITION BY zeitpunkt) AS "WF07T",
MAX (DECODE (db_sid, 'WF08K', VALUE, NULL)) OVER (PARTITION BY zeitpunkt) AS "WF08K",
MAX (DECODE (db_sid, 'WF08T', VALUE, NULL)) OVER (PARTITION BY zeitpunkt) AS "WF08T",
MAX (DECODE (db_sid, 'WF09K', VALUE, NULL)) OVER (PARTITION BY zeitpunkt) AS "WF09K",
MAX (DECODE (db_sid, 'WF09T', VALUE, NULL)) OVER (PARTITION BY zeitpunkt) AS "WF09T",
MAX (DECODE (db_sid, 'WF10K', VALUE, NULL)) OVER (PARTITION BY zeitpunkt) AS "WF10K",
MAX (DECODE (db_sid, 'WF10T', VALUE, NULL)) OVER (PARTITION BY zeitpunkt) AS "WF10T",
MAX (DECODE (db_sid, 'WG04T', VALUE, NULL)) OVER (PARTITION BY zeitpunkt) AS "WG04T",
MAX (DECODE (db_sid, 'WT05T', VALUE, NULL)) OVER (PARTITION BY zeitpunkt) AS "WT05T"
FROM db_performance_temp
ORDER BY zeitpunkt ASC
SQL> desc db_performance_temp
Name Null? Typ
ZEITPUNKT DATE
DB_SID VARCHAR2(30)
VALUE NUMBER

I found the solution.
Anychart seems to have a problem with null values!
The corrupted sorting only occured for a specific set of search criteria and a specific day. At this day some values have been null.
I added a "nvl( [...], 0) for every value.
No I get a correct sort order.

Help Creating Dynamic Stacked Column Chart with Multiple Criteria

Similar Messages

Maybe you are looking for