HELP!!! Energy Saver ...Automatically start at ...Shutdown at ...corrupted
A while ago in the Energy Saver settings I ticked the box to start my iMac every day at 7 and to shut down at 23. Although I unticked the boxes, it still starts at 7, so I think the preference file is corrupted. I also tried to change times, but without success. Which one is it. Are there other/better solutions ?
Rgds
MagicMike
Are you looking in the right Library folder? You need the one at the top level of your boot drive ("/Library") not the one in your home folder ("~/Library")
Similar Messages
-
Energy Saver settings not controlling shutdown
I've reset the SMU and PRAM and my problem continues to return. The computer shuts down in about 30 minutes regardless of what settings I put into Energy Saver. The only way I can prevent it is to open an image in Photoshop and then open an edit screen in a NIK plug-in. It still tries to shutdown but this stops it. I've noticed if Lightroom is running as well that it gets shutdown (even if playing a slideshow) and then the computer tries to quit but Photoshop stops it.
This has been going on for several months. I posted previously here and only response was to reset the above, which I do periodically. Any other suggestions? Is this a software or hardware problem?
I just want control back of my Energy Saver settings. It's almost impossible to download anything that is of any size - say an Apple 150Mb update.Hi Mel
Set Computer sleep to Never, Display Sleep to say 10 minutes and uncheck the box "Put the hard disk(s) to sleep when possible"
Then click the Schedule... button and make sure that the boxes for Startup, Wake, Sleep, Restart, Shutdown are unchecked and click OK.
Dennis -
Energy Saver Ignoring Start Up
I have been trying to get my computer to start up based on the Energy Saver settings, but it seems to be ignoring them. The computer has no problem shutting down from the energy saver, but won't ever start up on its own.
Using the energy saver to turn on, is your MBP turned off or in sleep mode?
Is the schedule set to +"start up"+ or "wake" mode?
Check out the following Articles:
http://support.apple.com/kb/HT1411 Apple Portables: Resetting the System Management Controller (SMC)
http://docs.info.apple.com/article.html?artnum=2238 Resetting your Mac's PRAM and NVRAM
As a last resort:
Try running +repair disk+ from your *software install DVD* and afterwards, run +repair permissions+ *from your HD.*
!http://i45.tinypic.com/jl0z95.jpg! -
Energy saver not starting the MM at times, holds the log a clue?
I have a MM as a server, normal OS, that sometimes does not start in the morning. It is set to shut down at 23.00 and does so all evenings at 23.10. However this morning (01-10-2011) it did not come on again and I was looking through the log and found some strange stuff.
like:
29/09/2011 12:38:06 /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.framework /Versions/A/Support/mdworker[848] FolderManager: Failed looking up user domain root; url='file://localhost/dev/null/' path=/dev/null/ err=-36 uid=505 euid
and
29/09/2011 12:38:11 /Applications/Utilities/QuickTime Player 7.app/Contents/MacOS/QuickTime Player 7[262] DTUninstall(), the current deferred task 0x267454 being removed is also currently executing its dtAddr routine, so unexpected things may result ( Radar #4555679 ).
and
29/09/2011 23:30:02 mds[66] (Error) Task: QueryClose failed (-1) for store <MDSStoreToken: 0x411050>{storeID:0x6b000010 registered:YES private:NO age:14h18m40s uuid:5D7AEDC7-4772-4AB5-A1D9-5C5AF631FBFF machPort:0x00004007}
Now if it hangs for some reason I have a cron script that kills all at 23.30. However I installed this via Cronnix and just checked and it is no longer there in Cronnix. however the machine turns of at 23.30, so this puzzled me too. Is there a way to see in cron if there is a script there? And remove it?
Two questions, is there anything in the log (I am not an expert here) that should not be or could cause this.
second one, if i do a cron killall, would this effect the energy control panel and for the machine not to start the next morning?
Looking forward to your wisdom.
29/09/2011 12:38:06 /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.fram ework/Versions/A/Support/mdworker[848] FolderManager: Failed looking up user domain root; url='file://localhost/dev/null/' path=/dev/null/ err=-36 uid=505 euid=505
29/09/2011 12:38:06 /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.fram ework/Versions/A/Support/mdworker[848] FolderManager: Failed looking up user domain root; url='file://localhost/dev/null/' path=/dev/null/ err=-36 uid=505 euid=505
29/09/2011 12:38:06 /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.fram ework/Versions/A/Support/mdworker[848] FolderManager: Failed looking up user domain root; url='file://localhost/dev/null/' path=/dev/null/ err=-36 uid=505 euid=505
29/09/2011 12:38:06 /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.fram ework/Versions/A/Support/mdworker[848] FolderManager: Failed looking up user domain root; url='file://localhost/dev/null/' path=/dev/null/ err=-36 uid=505 euid=505
29/09/2011 12:38:06 /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.fram ework/Versions/A/Support/mdworker[848] FolderManager: Failed looking up user domain root; url='file://localhost/dev/null/' path=/dev/null/ err=-36 uid=505 euid=505
29/09/2011 12:38:06 /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.fram ework/Versions/A/Support/mdworker[848] FolderManager: Failed looking up user domain root; url='file://localhost/dev/null/' path=/dev/null/ err=-36 uid=505 euid=505
29/09/2011 12:38:06 /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.fram ework/Versions/A/Support/mdworker[848] FolderManager: Failed looking up user domain root; url='file://localhost/dev/null/' path=/dev/null/ err=-36 uid=505 euid=505
29/09/2011 12:38:06 /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.fram ework/Versions/A/Support/mdworker[848] FolderManager: Failed looking up user domain root; url='file://localhost/dev/null/' path=/dev/null/ err=-36 uid=505 euid=505
29/09/2011 12:38:06 /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.fram ework/Versions/A/Support/mdworker[848] FolderManager: Failed looking up user domain root; url='file://localhost/dev/null/' path=/dev/null/ err=-36 uid=505 euid=505
29/09/2011 12:38:06 /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.fram ework/Versions/A/Support/mdworker[848] FolderManager: Failed looking up user domain root; url='file://localhost/dev/null/' path=/dev/null/ err=-36 uid=505 euid=505
29/09/2011 12:38:06 /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.fram ework/Versions/A/Support/mdworker[848] FolderManager: Failed looking up user domain root; url='file://localhost/dev/null/' path=/dev/null/ err=-36 uid=505 euid=505
29/09/2011 12:38:06 /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.fram ework/Versions/A/Support/mdworker[848] FolderManager: Failed looking up user domain root; url='file://localhost/dev/null/' path=/dev/null/ err=-36 uid=505 euid=505
29/09/2011 12:38:06 /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.fram ework/Versions/A/Support/mdworker[848] FolderManager: Failed looking up user domain root; url='file://localhost/dev/null/' path=/dev/null/ err=-36 uid=505 euid=505
29/09/2011 12:38:06 /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.fram ework/Versions/A/Support/mdworker[848] FolderManager: Failed looking up user domain root; url='file://localhost/dev/null/' path=/dev/null/ err=-36 uid=505 euid=505
29/09/2011 12:38:06 /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.fram ework/Versions/A/Support/mdworker[848] FolderManager: Failed looking up user domain root; url='file://localhost/dev/null/' path=/dev/null/ err=-36 uid=505 euid=505
29/09/2011 12:38:06 /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.fram ework/Versions/A/Support/mdworker[848] FolderManager: Failed looking up user domain root; url='file://localhost/dev/null/' path=/dev/null/ err=-36 uid=505 euid=505
29/09/2011 12:38:06 /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.fram ework/Versions/A/Support/mdworker[848] FolderManager: Failed looking up user domain root; url='file://localhost/dev/null/' path=/dev/null/ err=-36 uid=505 euid=505
29/09/2011 12:38:06 /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.fram ework/Versions/A/Support/mdworker[848] FolderManager: Failed looking up user domain root; url='file://localhost/dev/null/' path=/dev/null/ err=-36 uid=505 euid=505
29/09/2011 12:38:06 /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.fram ework/Versions/A/Support/mdworker[848] FolderManager: Failed looking up user domain root; url='file://localhost/dev/null/' path=/dev/null/ err=-36 uid=505 euid=505
29/09/2011 12:38:06 /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.fram ework/Versions/A/Support/mdworker[848] FolderManager: Failed looking up user domain root; url='file://localhost/dev/null/' path=/dev/null/ err=-36 uid=505 euid=505
29/09/2011 12:38:11 /Applications/Utilities/QuickTime Player 7.app/Contents/MacOS/QuickTime Player 7[262] DTUninstall(), the current deferred task 0x267454 being removed is also currently executing its dtAddr routine, so unexpected things may result ( Radar #4555679 ).
29/09/2011 12:38:30 /Applications/Utilities/QuickTime Player 7.app/Contents/MacOS/QuickTime Player 7[262] _RemoveTimeTask(), the current time manager task 0x2673dc being removed is also currently executing its tmAddr routine, so unexpected things may result ( Radar #4555679 ).
29/09/2011 12:43:56 /Applications/Utilities/QuickTime Player 7.app/Contents/MacOS/QuickTime Player 7[262] _RemoveTimeTask(), the current time manager task 0x2673dc being removed is also currently executing its tmAddr routine, so unexpected things may result ( Radar #4555679 ).
29/09/2011 12:46:50 /Applications/Utilities/QuickTime Player 7.app/Contents/MacOS/QuickTime Player 7[262] DTUninstall(), the current deferred task 0x267454 being removed is also currently executing its dtAddr routine, so unexpected things may result ( Radar #4555679 ).
29/09/2011 12:49:20 ntpd[53] time reset -0.783418 s
29/09/2011 12:49:42 /Applications/Utilities/QuickTime Player 7.app/Contents/MacOS/QuickTime Player 7[262] DTUninstall(), the current deferred task 0x267454 being removed is also currently executing its dtAddr routine, so unexpected things may result ( Radar #4555679 ).
29/09/2011 12:50:08 /Applications/Utilities/QuickTime Player 7.app/Contents/MacOS/QuickTime Player 7[262] DTUninstall(), the current deferred task 0x267454 being removed is also currently executing its dtAddr routine, so unexpected things may result ( Radar #4555679 ).
29/09/2011 12:52:15 /Applications/Utilities/QuickTime Player 7.app/Contents/MacOS/QuickTime Player 7[262] _RemoveTimeTask(), the current time manager task 0x2673dc being removed is also currently executing its tmAddr routine, so unexpected things may result ( Radar #4555679 ).
29/09/2011 12:59:17 /Applications/Utilities/QuickTime Player 7.app/Contents/MacOS/QuickTime Player 7[262] _RemoveTimeTask(), the current time manager task 0x2673dc being removed is also currently executing its tmAddr routine, so unexpected things may result ( Radar #4555679 ).
29/09/2011 13:02:17 /Applications/Utilities/QuickTime Player 7.app/Contents/MacOS/QuickTime Player 7[262] DTUninstall(), the current deferred task 0x267454 being removed is also currently executing its dtAddr routine, so unexpected things may result ( Radar #4555679 ).
29/09/2011 13:06:03 /Applications/Utilities/QuickTime Player 7.app/Contents/MacOS/QuickTime Player 7[262] DTUninstall(), the current deferred task 0x267454 being removed is also currently executing its dtAddr routine, so unexpected things may result ( Radar #4555679 ).
29/09/2011 13:07:52 /Applications/Utilities/QuickTime Player 7.app/Contents/MacOS/QuickTime Player 7[262] DTUninstall(), the current deferred task 0x267454 being removed is also currently executing its dtAddr routine, so unexpected things may result ( Radar #4555679 ).
29/09/2011 13:07:59 /Applications/Utilities/QuickTime Player 7.app/Contents/MacOS/QuickTime Player 7[262] _RemoveTimeTask(), the current time manager task 0x2673dc being removed is also currently executing its tmAddr routine, so unexpected things may result ( Radar #4555679 ).
29/09/2011 13:22:44 /Applications/Utilities/QuickTime Player 7.app/Contents/MacOS/QuickTime Player 7[262] DTUninstall(), the current deferred task 0x267454 being removed is also currently executing its dtAddr routine, so unexpected things may result ( Radar #4555679 ).
29/09/2011 13:23:47 ntpd[53] time reset -0.773574 s
29/09/2011 13:24:42 /Applications/Utilities/QuickTime Player 7.app/Contents/MacOS/QuickTime Player 7[262] DTUninstall(), the current deferred task 0x267454 being removed is also currently executing its dtAddr routine, so unexpected things may result ( Radar #4555679 ).
29/09/2011 13:28:28 /Applications/Utilities/QuickTime Player 7.app/Contents/MacOS/QuickTime Player 7[262] DTUninstall(), the current deferred task 0x267454 being removed is also currently executing its dtAddr routine, so unexpected things may result ( Radar #4555679 ).
29/09/2011 13:29:41 /Applications/Utilities/QuickTime Player 7.app/Contents/MacOS/QuickTime Player 7[262] DTUninstall(), the current deferred task 0x267454 being removed is also currently executing its dtAddr routine, so unexpected things may result ( Radar #4555679 ).
29/09/2011 13:29:57 /Applications/Utilities/QuickTime Player 7.app/Contents/MacOS/QuickTime Player 7[262] _RemoveTimeTask(), the current time manager task 0x2673dc being removed is also currently executing its tmAddr routine, so unexpected things may result ( Radar #4555679 ).
29/09/2011 13:35:39 /Applications/Utilities/QuickTime Player 7.app/Contents/MacOS/QuickTime Player 7[262] DTUninstall(), the current deferred task 0x267454 being removed is also currently executing its dtAddr routine, so unexpected things may result ( Radar #4555679 ).
29/09/2011 13:40:12 /Applications/Utilities/QuickTime Player 7.app/Contents/MacOS/QuickTime Player 7[262] DTUninstall(), the current deferred task 0x267454 being removed is also currently executing its dtAddr routine, so unexpected things may result ( Radar #4555679 ).
29/09/2011 13:41:56 /Applications/Utilities/QuickTime Player 7.app/Contents/MacOS/QuickTime Player 7[262] _RemoveTimeTask(), the current time manager task 0x2673dc being removed is also currently executing its tmAddr routine, so unexpected things may result ( Radar #4555679 ).
29/09/2011 13:42:14 /Applications/Utilities/QuickTime Player 7.app/Contents/MacOS/QuickTime Player 7[262] DTUninstall(), the current deferred task 0x267454 being removed is also currently executing its dtAddr routine, so unexpected things may result ( Radar #4555679 ).
29/09/2011 13:53:32 /Applications/Utilities/QuickTime Player 7.app/Contents/MacOS/QuickTime Player 7[262] DTUninstall(), the current deferred task 0x267454 being removed is also currently executing its dtAddr routine, so unexpected things may result ( Radar #4555679 ).
29/09/2011 13:58:11 ntpd[53] time reset -0.772285 s
29/09/2011 14:09:31 /Applications/Utilities/QuickTime Player 7.app/Contents/MacOS/QuickTime Player 7[262] _RemoveTimeTask(), the current time manager task 0x2673dc being removed is also currently executing its tmAddr routine, so unexpected things may result ( Radar #4555679 ).
29/09/2011 14:10:37 /Applications/Utilities/QuickTime Player 7.app/Contents/MacOS/QuickTime Player 7[262] DTUninstall(), the current deferred task 0x267454 being removed is also currently executing its dtAddr routine, so unexpected things may result ( Radar #4555679 ).
29/09/2011 14:18:01 /Applications/Utilities/QuickTime Player 7.app/Contents/MacOS/QuickTime Player 7[262] _RemoveTimeTask(), the current time manager task 0x2673dc being removed is also currently executing its tmAddr routine, so unexpected things may result ( Radar #4555679 ).
29/09/2011 14:19:50 /Applications/Utilities/QuickTime Player 7.app/Contents/MacOS/QuickTime Player 7[262] DTUninstall(), the current deferred task 0x267454 being removed is also currently executing its dtAddr routine, so unexpected things may result ( Radar #4555679 ).
29/09/2011 14:26:04 /Applications/Utilities/QuickTime Player 7.app/Contents/MacOS/QuickTime Player 7[262] DTUninstall(), the current deferred task 0x267454 being removed is also currently executing its dtAddr routine, so unexpected things may result ( Radar #4555679 ).
29/09/2011 14:30:02 iCal Helper[1070] Error loading /Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX: dlopen(/Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX, 262): no suitable image found. Did find:
/Library/ScriptingAdditions/24U Appearance OSAX.osax/Contents/MacOS/24U Appearance OSAX: mach-o, but wrong architecture
29/09/2011 14:30:02 [0x0-0x6c06c].com.apple.iCal.helper[1070] iCal Helper: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/24U Appearance OSAX.osax" declares no loadable handlers.
29/09/2011 14:33:15 ntpd[53] time reset -0.783281 s
29/09/2011 14:38:38 /Applications/Utilities/QuickTime Player 7.app/Contents/MacOS/QuickTime Player 7[262] DTUninstall(), the current deferred task 0x267454 being removed is also currently executing its dtAddr routine, so unexpected things may result ( Radar #4555679 ).
29/09/2011 14:48:25 /Applications/Utilities/QuickTime Player 7.app/Contents/MacOS/QuickTime Player 7[262] DTUninstall(), the current deferred task 0x267454 being removed is also currently executing its dtAddr routine, so unexpected things may result ( Radar #4555679 ).
29/09/2011 14:52:49 /Applications/Utilities/QuickTime Player 7.app/Contents/MacOS/QuickTime Player 7[262] _RemoveTimeTask(), the current time manager task 0x2673dc being removed is also currently executing its tmAddr routine, so unexpected things may result ( Radar #4555679 ).
29/09/2011 15:02:32 /Applications/Utilities/QuickTime Player 7.app/Contents/MacOS/QuickTime Player 7[262] DTUninstall(), the current deferred task 0x267454 being removed is also currently executing its dtAddr routine, so unexpected things may result ( Radar #4555679 ).
29/09/2011 15:07:54 ntpd[53] time reset -0.778359 s
29/09/2011 15:13:58 /Applications/Utilities/QuickTime Player 7.app/Contents/MacOS/QuickTime Player 7[262] DTUninstall(), the current deferred task 0x267454 being removed is also currently executing its dtAddr routine, so unexpected things may result ( Radar #4555679 ).
29/09/2011 15:17:42 AppleVNCServer[210] no such user: e@LKDC:SHA1.FDDC8A643866B8CB8605955C0F4157473DC11CF3: 2
29/09/2011 15:17:43 mds[66] (Normal) DiskStore: Creating index for /Volumes/Eric’s iPod
29/09/2011 15:17:43 /System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Conten ts/MacOS/AppleVNCServer[210] Authentication: SUCCEEDED :: User Name: 861user :: Viewer Address: 192.168.1.20 :: Type: DH
29/09/2011 15:17:50 com.apple.usbmuxd[59] HandleUSBMuxDictionary client 0x309010-iTunes/com.apple.iTunes using library usbmuxd-211 built on May 16 2011 at 00:10:01, running usbmuxd-211 built on May 16 2011 at 00:14:55
29/09/2011 15:17:56 mdworker[1156] -[ABAddressBook sharedAddressBook] Can't ABACQUIRE_FILE_LOCK /SourceCache/AddressBook/AddressBook-883/Framework/AddressBook/ABAddressBook.m: 3314
29/09/2011 15:18:13 com.apple.backupd[1175] Starting standard backup
29/09/2011 15:18:13 com.apple.backupd[1175] Backing up to: /Volumes/Server TM BU/Backups.backupdb
29/09/2011 15:18:24 com.apple.backupd[1175] No pre-backup thinning needed: 218.1 MB requested (including padding), 67.49 GB available
29/09/2011 15:18:41 com.apple.backupd[1175] Copied 627 files (6.5 MB) from volume OS 861 Seva.
29/09/2011 15:18:41 com.apple.backupd[1175] Waiting for index to be ready (100)
29/09/2011 15:18:44 com.apple.backupd[1175] Copied 634 files (6.5 MB) from volume Ganesh Data.
29/09/2011 15:18:44 com.apple.backupd[1175] No pre-backup thinning needed: 210.3 MB requested (including padding), 67.48 GB available
29/09/2011 15:18:45 com.apple.backupd[1175] Copied 103 files (103 bytes) from volume OS 861 Seva.
29/09/2011 15:18:47 com.apple.backupd[1175] Copied 110 files (136 bytes) from volume Ganesh Data.
29/09/2011 15:18:48 com.apple.backupd[1175] Starting post-backup thinning
29/09/2011 15:18:48 com.apple.backupd[1175] No post-back up thinning needed: no expired backups exist
29/09/2011 15:18:48 com.apple.backupd[1175] Backup completed successfully.
29/09/2011 15:19:14 iTunes[1165] [1e151a0] |ISyncManager|Warning| snapshot table has not been initialized
29/09/2011 15:19:14 iTunes[1165] [1e151a0] |ISyncManager|Warning| snapshot table has not been initialized
29/09/2011 15:19:14 iTunes[1165] [1e151a0] |ISyncManager|Warning| snapshot table has not been initialized
29/09/2011 15:19:14 iTunes[1165] [1e151a0] |ISyncManager|Warning| snapshot table has not been initialized
29/09/2011 15:21:06 AppleVNCServer[210] no such user: e@LKDC:SHA1.FDDC8A643866B8CB8605955C0F4157473DC11CF3: 2
29/09/2011 15:21:06 /System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Conten ts/MacOS/AppleVNCServer[210] Authentication: SUCCEEDED :: User Name: 861user :: Viewer Address: 192.168.1.20 :: Type: DH
29/09/2011 15:24:28 AppleVNCServer[210] no such user: e@LKDC:SHA1.FDDC8A643866B8CB8605955C0F4157473DC11CF3: 2
29/09/2011 15:24:29 /System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Conten ts/MacOS/AppleVNCServer[210] Authentication: SUCCEEDED :: User Name: 861user :: Viewer Address: 192.168.1.20 :: Type: DH
29/09/2011 15:25:03 iTunes[1165] [8cdcd50] |ISyncManager|Warning| snapshot table has not been initialized
29/09/2011 15:25:03 iTunes[1165] [8cdcd50] |ISyncManager|Warning| snapshot table has not been initialized
29/09/2011 15:26:32 com.apple.kextcache[1154] Created prelinked kernel /System/Library/Caches/com.apple.kext.caches/Startup/kernelcache_i386.4816DFC6.
29/09/2011 15:28:01 iTunes[1165] [2a4f940] |ISyncManager|Warning| snapshot table has not been initialized
29/09/2011 15:28:01 iTunes[1165] [2a4f940] |ISyncManager|Warning| snapshot table has not been initialized
29/09/2011 15:28:24 AppleVNCServer[210] no such user: e@LKDC:SHA1.FDDC8A643866B8CB8605955C0F4157473DC11CF3: 2
29/09/2011 15:28:24 /System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Conten ts/MacOS/AppleVNCServer[210] Authentication: SUCCEEDED :: User Name: 861user :: Viewer Address: 192.168.1.20 :: Type: DH
29/09/2011 15:42:24 ntpd[53] time reset -0.773068 s
29/09/2011 16:09:11 mdworker[1380] kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
29/09/2011 16:16:35 ntpd[53] time reset -0.769241 s
29/09/2011 16:51:42 ntpd[53] time reset -0.786261 s
29/09/2011 17:07:30 mdworker[1515] kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
29/09/2011 17:26:23 ntpd[53] time reset -0.777389 s
29/09/2011 18:00:01 ScheduleHelper[1598] perform update schedule
29/09/2011 18:00:02 sudo[1601] root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/usr/local/clamXav/bin/freshclam --stdout --quiet --no-warnings --log=/usr/local/clamXav/share/clamav/freshclam.log
29/09/2011 18:00:40 sudo[1604] root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/usr/sbin/chown -R clamav:clamav /usr/local/clamXav/share/clamav
29/09/2011 18:00:40 sudo[1605] root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/chmod 0775 /usr/local/clamXav/share/clamav
29/09/2011 18:00:40 sudo[1606] root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/chmod 0664 /usr/local/clamXav/share/clamav/bytecode.cld /usr/local/clamXav/share/clamav/daily.cld /usr/local/clamXav/share/clamav/freshclam.log /usr/local/clamXav/share/clamav/main.cld /usr/local/clamXav/share/clamav/mirrors.dat
29/09/2011 18:00:40 sudo[1607] root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/usr/bin/touch /usr/local/clamXav/share/clamav/freshclam.log
29/09/2011 18:00:40 sudo[1608] root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/chmod a+rw /usr/local/clamXav/share/clamav/freshclam.log
29/09/2011 18:00:42 ntpd[53] time reset -0.771689 s
29/09/2011 18:07:22 mdworker[1602] kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
29/09/2011 18:10:40 mdworker[1708] kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
29/09/2011 18:35:40 ntpd[53] time reset -0.780886 s
29/09/2011 19:10:53 ntpd[53] time reset -0.787276 s
29/09/2011 19:45:51 ntpd[53] time reset -0.782131 s
29/09/2011 20:20:15 ntpd[53] time reset -0.772707 s
29/09/2011 20:55:25 ntpd[53] time reset -0.785749 s
29/09/2011 21:30:03 ntpd[53] time reset -0.776478 s
29/09/2011 22:04:27 ntpd[53] time reset -0.772518 s
29/09/2011 22:38:39 ntpd[53] time reset -0.769790 s
29/09/2011 23:10:07 [0x0-0x76076].com.apple.iTunes[1165] AppleGVA:: Error creating the accelerator 1
29/09/2011 23:10:36 com.apple.usbmuxd[59] stopping.
29/09/2011 23:10:37 com.apple.usbmuxd[2129] usbmuxd-211 built on May 16 2011 at 00:14:55 on May 16 2011 at 00:14:54, running 32 bit
29/09/2011 23:13:02 ntpd[53] time reset -0.770554 s
29/09/2011 23:13:02 SyncServer[2132] [10a910] |SyncServer|Warning| Refreshing watchdog because of a calendar time change alert.
29/09/2011 23:15:00 postfix/master[2147] daemon started -- version 2.5.5, configuration /etc/postfix
29/09/2011 23:15:01 postfix/pickup[2148] 23E19E10ACD: uid=502 from=<861user>
29/09/2011 23:15:01 postfix/cleanup[2150] 23E19E10ACD: message-id=<[email protected]>
29/09/2011 23:15:01 postfix/qmgr[2149] 23E19E10ACD: from=<[email protected]>, size=630, nrcpt=1 (queue active)
29/09/2011 23:15:01 postfix/local[2152] 23E19E10ACD: to=<[email protected]>, orig_to=<861user>, relay=local, delay=0.58, delays=0.43/0.07/0/0.09, dsn=2.0.0, status=sent (delivered to mailbox)
29/09/2011 23:15:01 postfix/qmgr[2149] 23E19E10ACD: removed
29/09/2011 23:16:00 postfix/master[2147] master exit time has arrived
29/09/2011 23:30:01 com.apple.kextd[10] Warning: /Volumes/Ganesh Data/System/Library/Extensions: No such file or directory
29/09/2011 23:30:01 shutdown[2173] halt by root:
29/09/2011 23:30:01 shutdown[2173] SHUTDOWN_TIME: 1317331801 288548
29/09/2011 23:30:01 kernel Kext loading now disabled.
29/09/2011 23:30:01 kernel Kext unloading now disabled.
29/09/2011 23:30:01 kernel Kext autounloading now disabled.
29/09/2011 23:30:01 kernel Kernel requests now disabled.
29/09/2011 23:30:02 mDNSResponder[18] mDNSResponder mDNSResponder-258.21 (May 26 2011 14:40:13) stopping
29/09/2011 23:30:02 DirectoryService[11] BUG in libdispatch: 10K549 - 1960 - 0x10004004
29/09/2011 23:30:02 mds[66] (Error) Task: QueryClose failed (-1) for store <MDSStoreToken: 0x411050>{storeID:0x6b000010 registered:YES private:NO age:14h18m40s uuid:5D7AEDC7-4772-4AB5-A1D9-5C5AF631FBFF machPort:0x00004007}
29/09/2011 23:30:02 mds[66] (Error) Task: QueryClose failed (-1) for store <MDSStoreToken: 0x31d300>{storeID:0x6b000050 registered:YES private:NO age:14h18m34s uuid:3960D1F5-4FAA-4458-8A34-6FF0EA431AEB machPort:0x00006607}
29/09/2011 23:30:02 mds[66] (Error) Task: QueryClose failed (-1) for store <MDSStoreToken: 0x408960>{storeID:0x6b000000 registered:YES private:NO age:14h18m40s uuid:4F737406-226E-465E-A9FA-6F9A551C5E4B machPort:0x00003f07}
29/09/2011 23:30:02 mds[66] (Error) Task: QueryClose failed (-1) for store <MDSStoreToken: 0x42fbf0>{storeID:0x6b000080 registered:YES private:NO age:14h18m32s uuid:6186EE69-2F95-42DC-9371-0BFB15E18CA6 machPort:0x00007807}
29/09/2011 23:30:02 mds[66] (Error) Task: QueryClose failed (-1) for store <MDSStoreToken: 0x322ca0>{storeID:0x6b000070 registered:YES private:NO age:14h18m32s uuid:64061640-ABD4-4025-AD2D-1CEDEA9815A4 machPort:0x00007607}
29/09/2011 23:30:02 WindowServer[114] hidd died. Reestablishing connection.
29/09/2011 23:30:02 mds[66] (Error) Task: QueryClose failed (-1) for store <MDSStoreToken: 0x313010>{storeID:0x6b000020 registered:YES private:NO age:14h18m35s uuid:2FB075FB-6E5F-4637-BAEC-E4A74256BFC3 machPort:0x00003b0b}
29/09/2011 23:30:02 mds[66] (Error) Task: QueryClose failed (-1) for store <MDSStoreToken: 0x320070>{storeID:0x6b000060 registered:NO private:NO age:NA uuid:3A152D5F-803A-4E82-838C-C53DBB7D3AE2 machPort:0x00006e07}
29/09/2011 23:30:02 mds[66] (Error) Task: QueryClose failed (-1) for store <MDSStoreToken: 0x421630>{storeID:0x6b000030 registered:NO private:NO age:NA uuid:F635C2D6-CD13-4DED-9C7A-1E1F6FDF24A9 machPort:0x0000610f}
29/09/2011 23:30:02 WindowServer[114] bootstrap_look_ip failed: Unknown service name
29/09/2011 23:30:02 JavaApplicationStub[269] CGSShutdownServerConnections: Detaching application from window server
29/09/2011 23:30:02 JavaApplicationStub[269] MIG: server died: CGSReleaseShmem : Cannot release shared memory
29/09/2011 23:30:02 JavaApplicationStub[269] kCGErrorFailure: _CGSLockWindow: Cannot synchronize window backing store
29/09/2011 23:30:02 JavaApplicationStub[269] kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
29/09/2011 23:30:02 JavaApplicationStub[269] kCGErrorFailure: _CGSLockWindow: Cannot synchronize window backing store
29/09/2011 23:30:02 JavaApplicationStub[269] kCGErrorFailure: _CGSLockWindow: Cannot synchronize window backing store
29/09/2011 23:30:02 JavaApplicationStub[269] CGSDisplayServerShutdown: Detaching display subsystem from window server
29/09/2011 23:30:02 JavaApplicationStub[269] kCGErrorFailure: CGSLockWindowRectBits
29/09/2011 23:30:02 JavaApplicationStub[269] kCGErrorInvalidConnection: CGSWindowAddRegionToDirtyShape: Invalid connection
29/09/2011 23:30:02 JavaApplicationStub[269] kCGErrorInvalidConnection: CGSUnlockWindowRectBits: Invalid connection
29/09/2011 23:30:02 JavaApplicationStub[269] kCGErrorInvalidConnection: CGSFlushWindowContentRegion: Invalid connection
29/09/2011 23:30:02 JavaApplicationStub[269] kCGErrorCannotComplete: CGSDeviceSynchronize: Invalid device window
29/09/2011 23:30:02 JavaApplicationStub[269] HIToolbox: received notification of WindowServer event port death.
29/09/2011 23:30:02 JavaApplicationStub[269] port matched the WindowServer port created in BindCGSToRunLoop
29/09/2011 23:30:02 JavaApplicationStub[269] kCGErrorInvalidConnection: CGSWindowAddRegionToDirtyShape: Invalid connection
29/09/2011 23:30:02 JavaApplicationStub[269] kCGErrorInvalidConnection: CGSFlushWindowContentRegion: Invalid connection
29/09/2011 23:30:02 JavaApplicationStub[269] kCGErrorRangeCheck: On-demand launch of the Window Server is allowed for root user only.
29/09/2011 23:30:04 com.apple.SecurityServer[23] Session 0x224af3 dead
30/09/2011 06:19:48 kernel npvhash=4095
29/09/2011 23:30:04 com.apple.SecurityServer[23] Killing auth hosts
30/09/2011 06:19:48 kernel PAE enabled
30/09/2011 06:19:48 kernel Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3~1/RELEASE_I386
30/09/2011 06:19:48 kernel vm_page_bootstrap: 309897 free pages and 17783 wired pages
30/09/2011 06:19:48 kernel standard timeslicing quantum is 10000 us
30/09/2011 06:19:48 kernel mig_table_max_displ = 73
30/09/2011 06:19:48 kernel AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
30/09/2011 06:19:48 kernel AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
30/09/2011 06:19:48 kernel calling mpo_policy_init for TMSafetyNet
30/09/2011 06:19:48 kernel Security policy loaded: Safety net for Time Machine (TMSafetyNet)
30/09/2011 06:19:48 kernel calling mpo_policy_init for Quarantine
30/09/2011 06:19:48 kernel Security policy loaded: Quarantine policy (Quarantine)
30/09/2011 06:19:48 kernel calling mpo_policy_init for Sandbox
30/09/2011 06:19:48 kernel Security policy loaded: Seatbelt sandbox policy (Sandbox)
30/09/2011 06:19:48 kernel Copyright (c) 1982, 1986, 1989, 1991, 1993
30/09/2011 06:19:48 kernel The Regents of the University of California. All rights reserved.
30/09/2011 06:19:48 kernel MAC Framework successfully initialized
30/09/2011 06:19:48 kernel using 6553 buffer headers and 4096 cluster IO buffer headers
30/09/2011 06:19:48 kernel IOAPIC: Version 0x20 Vectors 64:87
30/09/2011 06:19:48 kernel ACPI: System State [S0 S3 S4 S5] (S3)
30/09/2011 06:19:48 kernel PFM64 0x10000000, 0xf0000000
30/09/2011 06:19:48 kernel [ PCI configuration begin ]
30/09/2011 06:19:48 kernel PCI configuration changed (bridge=1 device=1 cardbus=0)
30/09/2011 06:19:48 kernel [ PCI configuration end, bridges 4 devices 17 ]
30/09/2011 06:19:48 kernel AppleIntelCPUPowerManagement: (built 16:44:45 Jun 7 2011) initialization complete
30/09/2011 06:19:48 kernel mbinit: done (64 MB memory set for mbuf pool)
30/09/2011 06:19:48 kernel FireWire (OHCI) Lucent ID 5811 built-in now active, GUID 0017f2fffe7f47c2; max speed s400.
30/09/2011 06:19:48 kernel rooting via boot-uuid from /chosen: 1171BAC7-9D2F-31F0-A684-F99C7267B09F
30/09/2011 06:19:48 kernel Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
30/09/2011 06:19:48 kernel com.apple.AppleFSCompressionTypeZlib kmod start
30/09/2011 06:19:48 kernel com.apple.AppleFSCompressionTypeZlib load succeeded
30/09/2011 06:19:48 kernel AppleIntelCPUPowerManagementClient: ready
30/09/2011 06:19:48 kernel Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT2 @2/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDri ver/FUJITSU MHV2060BHPL Media/IOGUIDPartitionScheme/Apple_HFS_Untitled_2@3
30/09/2011 06:19:48 kernel BSD root: disk0s3, major 14, minor 3
30/09/2011 06:19:48 kernel [Bluetooth::CSRHIDTransition] switchToHCIMode (legacy)
30/09/2011 06:19:48 kernel [Bluetooth::CSRHIDTransition] transition complete.
30/09/2011 06:19:48 kernel CSRUSBBluetoothHCIController::setupHardware super returned 0
30/09/2011 06:19:48 kernel hfs: Removed 1 orphaned / unlinked files and 0 directories
30/09/2011 06:19:48 kernel AppleYukon2: Marvell Yukon Gigabit Adapter 88E8053 Singleport Copper SA
30/09/2011 06:19:48 kernel AppleYukon2: RxRingSize <= 1024, TxRingSize 256, RX_MAX_LE 1024, TX_MAX_LE 768, ST_MAX_LE 3328
30/09/2011 06:19:39 com.apple.launchd[1] *** launchd[1] has started up. ***
30/09/2011 06:19:49 kernel yukon: Ethernet address 00:16:cb:a7:f7:9d
30/09/2011 06:19:49 kernel systemShutdown false
30/09/2011 06:19:50 mDNSResponder[18] mDNSResponder mDNSResponder-258.21 (May 26 2011 14:40:13) starting
30/09/2011 06:19:50 com.apple.SecurityServer[23] Session 0xbffffbb6 created
30/09/2011 06:19:51 kernel Previous Shutdown Cause: 0
30/09/2011 06:19:51 kernel Warning - kext com.apple.iokit.CHUDKernLib has immediate dependencies on both com.apple.kernel* and com.apple.kpi.* components; use only one style.
30/09/2011 06:19:51 kernel Warning - kext com.apple.iokit.CHUDProf has immediate dependencies on both com.apple.kernel* and com.apple.kpi.* components; use only one style.
30/09/2011 06:19:51 blued[16] Apple Bluetooth daemon started
30/09/2011 06:19:52 kernel DSMOS has arrived
30/09/2011 06:19:52 kernel Atheros: mac 10.3 phy 6.1 radio 10.2
30/09/2011 06:19:52 kernel AppleSM56KUSBModemFamily:start -- entering com.apple.driver.AppleSM56KUSBModemFamily (1.1.13)
30/09/2011 06:19:52 com.apple.SecurityServer[23] Entering service
30/09/2011 06:19:53 kernel AppleSM56KUSBModemFamily_setupWakeOnRingPMCallback with pmRootDomain - Succeeded
30/09/2011 06:19:53 kernel AirPort_AthrFusion21: Ethernet address 00:17:f2:52:04:5e
30/09/2011 06:19:53 kernel IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
30/09/2011 06:19:53 configd[14] network configuration changed.
30/09/2011 06:19:53 configd[14] setting hostname to "861.local"
30/09/2011 06:19:56 kernel Ethernet [AppleYukon2]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,ac0c,0de1,0200,c5e1,2800]
30/09/2011 06:19:58 com.freemacsoft.appcleanerd[84] Appcleanerd started successfully.
30/09/2011 06:20:01 bootlog[79] BOOT_TIME: 1317356378 0
30/09/2011 06:20:02 com.apple.usbmuxd[60] usbmuxd-211 built on May 16 2011 at 00:14:55 on May 16 2011 at 00:14:54, running 32 bit
30/09/2011 06:20:03 kernel AirPort: Link Down on en1. Reason 1 (Unspecified).
30/09/2011 06:20:05 configd[14] network configuration changed.
30/09/2011 06:20:09 postfix/master[53] daemon started -- version 2.5.5, configuration /etc/postfix
30/09/2011 06:20:09 com.apple.SystemStarter[61] Starting the DynDNS Updater Daemon
30/09/2011 06:20:09 com.apple.SystemStarter[61] Starting the Snort NIDS
30/09/2011 06:20:09 com.apple.launchd[1] (0x308db0.anonymous.nohup[96]) Bug: launchd_core_logic.c:8303 (24498):0
30/09/2011 06:20:09 com.apple.launchd[1] (0x308db0.anonymous.nohup[96]) Switching sessions is not allowed in the system Mach bootstrap.
30/09/2011 06:20:09 com.apple.launchd[1] (0x308db0.anonymous.nohup[96]) _vprocmgr_switch_to_session(): kr = 0x44c
30/09/2011 06:20:10 postfix/pickup[93] 3BB64E10B34: uid=0 from=<root>
30/09/2011 06:20:10 postfix/cleanup[106] 3BB64E10B34: message-id=<[email protected]>
30/09/2011 06:20:10 postfix/qmgr[94] 3BB64E10B34: from=<[email protected]>, size=511, nrcpt=1 (queue active)
30/09/2011 06:20:10 postfix/local[113] 3BB64E10B34: to=<[email protected]>, orig_to=<root>, relay=local, delay=24609, delays=24609/0.19/0/0, dsn=2.0.0, status=sent (delivered to file: /dev/null)
30/09/2011 06:20:10 postfix/qmgr[94] 3BB64E10B34: removed
30/09/2011 06:20:12 com.apple.SystemStarter[61] dyld: Library not loaded: /usr/lib/libiodbc.2.1.6.dylib
30/09/2011 06:20:12 com.apple.SystemStarter[61] Referenced from: /Applications/HenWen/HenWen.app/Contents/MacOS/snort
30/09/2011 06:20:12 com.apple.SystemStarter[61] Reason: image not found
30/09/2011 06:20:12 com.apple.SystemStarter[61] /Library/StartupItems/HenWen/HenWen: line 9: 98 Trace/BPT trap "/Applications/HenWen/HenWen.app/Contents/MacOS/snort" -D -c "/Applications/HenWen/HenWen.app/Contents/Resources/snort.conf" -i en0
30/09/2011 06:20:12 SystemStarter[61] NIDS (92) did not complete successfully
30/09/2011 06:20:12 SystemStarter[61] The following StartupItems failed to start properly:
30/09/2011 06:20:12 SystemStarter[61] /Library/StartupItems/HenWen
30/09/2011 06:20:12 SystemStarter[61] - execution of Startup script failed
30/09/2011 06:20:12 com.apple.ReportCrash.Root[119] 2011-09-30 06:20:12.733 ReportCrash[119:2503] Saved crash report for snort[98] version ??? (???) to /Library/Logs/DiagnosticReports/snort_2011-09-30-062012_localhost.crash
30/09/2011 06:20:13 /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[68 ] Login Window Application Started
30/09/2011 06:20:17 kernel display: Not usable
30/09/2011 06:20:17 WindowServer[120] kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
30/09/2011 06:20:17 com.apple.WindowServer[120] Fri Sep 30 06:20:17 861.local WindowServer[120] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
30/09/2011 06:20:17 com.apple.SecurityServer[23] Session 0x30ad51 createdMadMacs0 wrote:
Crontab should take care of both for you: http://www.manpagez.com/man/1/crontab/.
Use sudo if it's a root level event or leave it out to see yours.
Thanks helpful,
anybody who has an answer for my other questions? -
Energy save scheduled start up
My MacBook Air has shut down and the power button doesn't work. But I had a schedule start up which hasn't happened. Please help ASAP!
Computer Won’t Turn On
-
Please help, energy saver problems
I have a problem with my imac G5 (2004). Whenever I put it to sleep and leave it for awhile, it will now wake up. I have to unplug the G5 and reinsert the plug and start over to get it going again. I tried resetting the (PRAM) and the (SMU) but no such luck. I also unplugged it for a good 5 minutes and replugged it and still nothing. The articles with this problem only applied to version 9 and not X (I have version X). Please any info. that you have would be most appreciative!!!
sorry that should have read "I'm running IE 6.0.28 with version 1.5.0_02 of the JRE"
-
Automatically change energy saver
Is there anyway that I can have energy saver automatically change the setting to "Highest" when I start up Halo? I noticed a huge performance leap when I changed to highest in the middle of playing halo and was wondering if there were an easier way to change the settings.
Sort of, yes. For 99% of the users and applications, it works pretty good. However for demanding applications and games (like Photoshop or in this case, Halo) Apple recommends that you use the "Highest" setting to get optimal performance:
From the developer docs :
http://developer.apple.com/documentation/Hardware/DeveloperNotes/Macintosh_CPUs-G5/iMacG5May05/iMacG5.pdf
Note: For best performance when using professional applications with high demand on the system
(such as Final Cut Pro or Logic), you may want to set the processor/bus speed option to highest.
Games are really hit or miss, regarding performance. A lot of modern games offload much of the heavy lifting to the GPU. In many cases, the load on the CPU is not constant so the Automatic setting throttles everything back. However there is a "lag" time in between, so it's not an instant change back and forth from Automatic to Highest. So in order to get the most even, constant performance, Highest is recommended. -
Energy saver keeps coming unlocked... sleep won't work
I've noticed when I arrive in the morning that my Mac Pro is awake. But the Time Machine log shows it had been an entire hour since TM was active.
I researched various places (including here) and deleted the preference for com.apple.PowerManagement.plist.
But the problem persists. What's more mysterious is that even though I lock the energy saver padlock, when I go back the next morning it is unlocked.
Any idea what's going on here?Test after each of the following steps that you haven’t already tried:
Step 1
▹ System Preferences ▹ Energy Saver ▹ Power Adapter ▹ Wake for network access: uncheck. You may need to unlock the preference pane by clicking the lock icon in the lower left corner and entering your administrator password.
Step 2
▹ System Preferences ▹ Energy Saver ▹ Schedule… ▹ Start up or wake: uncheck
Step 3
▹ System Preferences ▹ Print & Scan ▹ Open Print Queue...
Check all printers for unfinished jobs. Deal with any you find.
Step 4
Disconnect all wired peripherals except keyboard, mouse or trackball, and monitor, if applicable.
Step 5
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
Select All Processes from the menu in the toolbar, if not already selected. Enter “powerd” (without the quotes) in the "Filter" text field. Select the powerd process and click the Quit Process button in the toobar (stop-sign icon.) In the sheet that opens, click Force Quit. You’ll be prompted for your administrator password. The process will be relaunched immediately.
Step 6
Boot in safe mode and log in. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Note: If FileVault is enabled under Mac OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal. Don’t launch any applications at first. If sleep still doesn’t work properly, back up all data and reinstall the Mac OS. After that, if you still have the issue, make a “Genius” appointment at an Apple Store to have the machine tested.
If sleep now works as expected, go on to the next step.
Step 7
Still in safe mode, launch the usual set of applications that are running when you have the problem, including your login items, one at a time, testing after each one. Some applications may not work; skip them. You might be able to identify the cause of the problem this way.
Step 8
If sleep is still working after you’ve launched all the usual applications, reboot as usual (not in safe mode) and test again. If sleep still works, you’re done, at least for the moment.
If you still have the sleep issue after booting out of safe mode, post again. -
Energy Saver Panel: Machine not automatically starting up in the morning
My blind server (MM) is set to start every morning at 06.00. (via the 'Schedule' button in the Energy Saver control Panel).
It works most mornings, but every now and than it does not. Any ideas as to why?Anybody any idea as to why this happens?
-
Please Help: Cannot open Energy Saver on iBook
When I click on the Energy Saver preference pane on my iBook (dual USB) G3 (running OS 10.3.9, with a 20 GB hard drive with 13 GB of space left), I get the message "Preferences Error, Could not load Energy Saver." This just suddenly started happening a couple of days ago.
I have searched this forum as well as Google and have found no information about this problem. After I opened Disk Utility while booted from my external hard drive, I ran First Aid and Repair Permissions on the iBook. No change in the problem with Energy Saver.
Here are the additional steps I've taken:
1. As a test, I created a new user account and logged in under that account. Still got the same message when trying to open Energy Saver.
2. I attached my iBook to my iMac G5 via firewire cable and booted my iBook into target disk mode. Then I ran Disk Warrior and TechTool Pro on the iBook. Both programs gave the iBook a clean bill of health.
3. Via the Find command, I searched my hard drive for any files with "energy" in the title. No hits.
4. I went to my ~/Library/Preferences Folder and found the com.apple.systempreferences.plist file. Removed that file, restarted the iBook. Still could not access Energy Saver.
5. I put the System Preferences application into a folder called Sys Prefs Old. Dragged the System Preferences application from my iMac into the Applications folder on my iBook. Opened this new System Preferences application. Clicked on Energy Saver pane. Still got the message "Could not load energy saver."
6. Inserted OS X 10.3 install disc into iBook. Used Pacifist to re-install just the System Preferences application. The application was an older version than the one that had been giving me problems. Opened this application and clicked on Energy Saver pane. Still got the message "Could not load energy saver."
I'm at my wit's end. I can no longer change any of my energy settings on my iBook. If anyone can make a suggestion, I would certainly appreciate it. If your suggestion has to do with using Terminal, please talk me through it in baby talk because I've never used Terminal.
iMac G5, iBook G3 Mac OS X (10.3.9)
iMac G5, iBook G3 Mac OS X (10.3.9)Steven
It may help to look in your log files to find out why your applications are quitting.
The simplest way to look at log files is to use Console.
Open the Console application from /Applications/Utilities. It will default to showing the "console.log" and possibly the "system.log". Use the File menu if necessary to get both these logs open, and use the Broom to Clear both windows.
Now try to open the Energy Saver preference pane and see what appears in either of these windows. Copy and paste it here.
You may see a message saying "Crash report written to <pathname of crash.log>". Click on the "Logs" icon at the top left in the tool bar. Then, depending on the <pathname of crash.log> in your message, look under either ~/Library/Logs or /Library/Logs by clicking the disclosure triangle, then click the disclosure triangle for "CrashReporter".
Find the crash log corresponding to your message and select it. It will open at the end of the log. Look back for the last line of asterisks in the log, then post everything after that to the end of the log. -
Setting Shutdown time in Energy Saver
I'm trying to set a shutdown time in the Energy Saver on an additionaliMac G5 I have. The wakeup time works fine; however, every time I go into the Energy Saver, the lock is unlocked even though I've locked it when I set the time and closed out. The computer stays on past the time I've chosen. I've run disk permissions and Disk Warrior and still the problem exists. Everything else works fine.
I don't think the change of administrator could do any difference, unless there's data corruption in the user Library folder.
Just in case, the auto shut down will not work:
When administrator is not logged in.
When the system is sleeping at the shut down time.
When an automatic backup is being performed, or certain obscure underlying system task is running.
MacMini G4 1.25GHz 1GB Mac OS X (10.4.9) -
I have the Energy Saver setting set to NEVER on both, and my computer STILL goes to SLEEP after 1 hour. Please help!
My COMPUTER goes to sleep and disrupts my apple tv all the time. How can I fix this?That you are getting the BONG is a good sign, it's unlikely to be hardware if you are able to hear that.
Start by running SW update. It's not that there is a specific fix, but when updating it may rewrite some system files which may get this going again purely as a side affect. Worth a go, and should not harm the system.
Try reset the PRAM - Resetting your Mac's PRAM and NVRAM
Hopefully one of these quick fixes works, otherwise we'll need to try isolate the issue next - so if still having a problem, I'd try create a new user and login as that user to see if the issue persists (which will tell us if it's system wide or user specific) -
I have tried on several occasions to try to get my MacBook Pro to Start up at a predetermined time using the Energy Saver Function. However it will not Start up under its own battery power. The goal is to make the MBP an awesome alarm clock that not only plays music upon Start up, but fetches my e-mail, and pulls up my favorite news sites. This of course done with automator.
I did some research on the web via Google, to see if other owners have this issue. The MBP will Startup if plugged into AC Power at a predetermined time with Energy Saver, however if I leave it unplugged, with the lid open, it fails to Start up even with a full charge on the battery.
I called Apple Support, but the tech I worked with for weeks said it would be addressed. However I have not heard back from them, and my ticket was opened back in April of 2006.
Even the tech tried the same scenario and his didn't boot either. Can someone try this on theirs to see if it worked? Any help is greatly appreciated.
MacBook Pro Mac OS X (10.4.7)
MacBook Pro Mac OS X (10.4.7)
MacBook Pro Mac OS X (10.4.7)Many of the CyberPower UPS units are compatible. Checkout the home solutions on this page: http://www.cyberpowersystems.com/products/ups-systems.html
-
How to automate the Oracle database start and shutdown process
How we can automate and oracle database start and stop procees with Linux start/shutdown process.
I want to automatically start the oracle database at the time linux server and shutdown the database on shutdown linux server.Hi,
I can share my scripts:
1) /home/oracle/start_oracle.sh
#Script should be ran as Oracle user
cd /tmp
export ORACLE_SID=orcl
export ORACLE_HOME=/oracle/ora9i
lsnrctl start
sqlplus -S /nolog <<ENDSQL
connect / as sysdba
startup
exit
ENDSQL
emctl start dbconsole
isqlplusctl start
NOTE: emctl and isqlplus are optional
2) /home/oracle/stop_oracle.sh
#Script should be ran as Oracle user
cd /tmp
export ORACLE_SID=orcl
export ORACLE_HOME=/oracle/ora9i
isqlplusctl stop
emctl stop dbconsole
sqlplus -S /nolog <<ENDSQL
connect / as sysdba
shutdown immediate
exit
ENDSQL
lsnrctl stop
NOTE: emctl and isqlplus are optional
Then what you need:
1) K91oracle_stop (put it in the desired run level)
#!/bin/bash
# description: Stop Oracle before reboots
su - oracle -c "/home/oracle/stop_oracle.sh" >> /home/oracle/stoporacle.log
2) S91oracle_start (put it in the desired run level)
#!/bin/bash
# description: Start Oracle after reboots
su - oracle -c "/home/oracle/start_oracle.sh" >> /home/oracle/startoracle.log
Bye. -
Can't get MAC to shut down and start up via the schedule button in system preferences energy saver. Is there another way?
Try this to start:
Repair the Hard Drive and Permissions
Boot from your Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Maybe you are looking for
-
Everything on my iPod touch (3rd gen) works just fine except the audio out put.
-
App Store: Unconfirmed buy after clicking on URL ("silent buy")?
Hi Forum, Last Friday I bought on my new iPad without my confirmation ("Click on Price or Purchase") 2 applications by simply clicking on a web link which opened the App Store on my new iPad! Yes, you read correct: I did NOT confirm the purchase by c
-
Any best practices for getting change-log data similar to that captured in CDHDR/CDPOS tables into SAP BI? What options exist for tracking changes to sales orders or invoices into SAP BI without touching CDHDR/CDPOS tables? Thanks, Vinny Ahuja
-
Soemone please help! cant move videos to a different 'playlsit' or 'device'
i have m4s uploaded to my itunes however, they are only in the movies folder, i need to mvoe them 'music videos' or somewhere else where my car will recognize them, please help ive tried everything, ive created a playlist and it wont show up in the c
-
Hi everyone, Is there a way I can change the cost center on a line item of the document? Because I have a problem reversing that accrual document through F.81 since, the cost center used on one of the line items of the accrual document is locked for