Help! - Filters Won't Work!
Hello!
I want to apply the photocopy filter on some of my pictures to create a mock coloring book.
It worked great on the first photo. However, now every photo just turns out all white. I even tried going back and redoing the first photo and that won't work now! I can't figure it out. Some of the other filters are having the same problem.
Any ideas what might be causing this?
Thanks!!!
Trashing the prefs will fix it, but a simpler fix for some "filters won't work" problems may just require hitting the "D" key to reset the foreground/background colors.
Similar Messages
-
Please help - iMessage won't work
So I updated my phone today like I'm sure a lot of you did and I tried going in to activate my iMessage, I've tried it for hours and even reset my phone and it won't work. I know my id and password are right and my connection to my wifi is good but every time I do it it pops up after about 30 seconds of trying and says "could not sign in. Please check your network connection and try again"
Someone please help ... What do I do? My date & time thing is already set to on as I previously read.If you are having trouble with SMS messages, then you would need to address that with your carrier, unless you are receiving them and just not get a notification. If you have followed the steps I gave you for iMessage and you are not receiving notifications, then check the settings for Notification Center. If you have Messages set to show on the lock screen and play a sound, and display a banner, etc. then your next step is a restore. First restore from a backup, and if that doesn't work, then restore as a new device. Restoring the phone will result in the loss of all data. Make sure you have backed up the phone, synced all content and imported photos to the computer.
-
Flash help, still won't work
I am trying to put a flash video on my website. I tried to
follow all the directions from start to finish, but somewhere along
the way I went wrong. I have a video I made in Final Cut Pro,
exported in QT format. I used the Adobe Flash Encoder to convert
the .mov to a .flv file. Then I imported the .flv file into Flash
CS3 Pro and put a skin to it and saved the .fla and exported as
.swf. Then I went into Dreamweaver CS3 and used the "insert media"
function to insert the .swf file. I got it positioned correctly and
go to view it in the broswer - looks great, autoplay works, skin
appears, etc. So then I upload / "put" to the server and click
"yes" to include dependent elements. But then when I navigate to
the site from the brower, the video doesn't work. In fact, it
doesnt show up at all. All you see is a blank spot where the video
should be. Its probably obvious by now that Im not too terribly
knowledgeable about DW or web design or HTML, but I feel like I got
pretty close and Im frustrated that it won't work. Since it works
perfectly in the "preview in browser" function in DW, I feel that I
am getting close. But my guess is that the error is somewhere in
the upload to server process since it works locally but not
remotely. Any help would be much appreciated as Im getting
frustrated. Below is the URL. The problem could be anywhere in the
process. I tried creating the .fla file with both a local reference
to the .flv file (and then uploading all to server) as well as
creating with a reference to the .flv file after already uploading
to server. Still no cigar. I can look at the remote view and see
that the .html file, the .swf file, the .fla file, the .flv file,
and the script file are all uploaded. Maybe the referencing is
incorrect...just not sure. Thanks !
http://www.spottedtailproductions.com/upstream_flash.html>
http://www.spottedtailproductions.com/upstream_flash.html
Bad link.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"STPfilms" <[email protected]> wrote in
message
news:[email protected]...
>I am trying to put a flash video on my website. I tried
to follow all the
> directions from start to finish, but somewhere along the
way I went wrong.
> I
> have a video I made in Final Cut Pro, exported in QT
format. I used the
> Adobe
> Flash Encoder to convert the .mov to a .flv file. Then I
imported the .flv
> file
> into Flash CS3 Pro and put a skin to it and saved the
.fla and exported as
> .swf. Then I went into Dreamweaver CS3 and used the
"insert media"
> function to
> insert the .swf file. I got it positioned correctly and
go to view it in
> the
> broswer - looks great, autoplay works, skin appears,
etc. So then I upload
> /
> "put" to the server and click "yes" to include dependent
elements. But
> then
> when I navigate to the site from the brower, the video
doesn't work. In
> fact,
> it doesnt show up at all. All you see is a blank spot
where the video
> should
> be. Its probably obvious by now that Im not too terribly
knowledgeable
> about DW
> or web design or HTML, but I feel like I got pretty
close and Im
> frustrated
> that it won't work. Since it works perfectly in the
"preview in browser"
> function in DW, I feel that I am getting close. But my
guess is that the
> error
> is somewhere in the upload to server process since it
works locally but
> not
> remotely. Any help would be much appreciated as Im
getting frustrated.
> Below is
> the URL. The problem could be anywhere in the process. I
tried creating
> the
> .fla file with both a local reference to the .flv file
(and then uploading
> all
> to server) as well as creating with a reference to the
.flv file after
> already
> uploading to server. Still no cigar. I can look at the
remote view and see
> that
> the .html file, the .swf file, the .fla file, the .flv
file, and the
> script
> file are all uploaded. Maybe the referencing is
incorrect...just not sure.
> Thanks !
>
>
http://www.spottedtailproductions.com/upstream_flash.html
> -
Help Ipod won't work with my computer anymore!
I have a 5th gen Ipod and it has been working fine for the first month I've had it but recently I can't seem to get it to work with Itunes or even be detected on my computer. I've already tried all the things it says to do on the support page and none of it seems to be working. I've reinstalled everything and tried the Ipod updater but it won't work. Has anyone else had this problem and if so what should I do? Is there any way I can just get a new Ipod since I've only had this one for a month?
Try putting your iPod into disk mode...
Putting iPod into Disk Mode
Now try to restore it...
Restore the iPod
btabz -
I have just installed newblue filters and they don't work. Not only that but now none of my filters will work. Can anyone help. Norman
norrieboy wrote:
I have just installed newblue filters and they don't work. Not only that but now none of my filters will work. Can anyone help. Norman
Seems obvious that you must delete them but I'm curious why you didn't ask the publisher of the filter why they don't work. Rather like asking a Word perfect user group why the spell checker in WordStar doesn't work.
bogiesan -
Filters Won't Work in CS3 - Get "file system I/O error" message
Using CS3 on Mac G5, OS 10.4, and some Photoshop filters (e.g. Liquify) won't open, getting the message: "A file system I/O error has occurred."
Some filters do open, but others fail.
Have tried reinstalling CS3, trashing preferences, unlocked permissions - no help.
Any suggestions?Peter,
The very instant you create a new document or open an existing image file, Photoshop creates a Scratch Disk to use as virtual memory, regardless of how much RAM you have installed. This scratch disk is created on whichever drive you have designated as your PRIMARY disk drive. If it happens to be on your boot drive, i.e. the drive where your OS (Operating System) resides, it will be competing with the OS swap file for use of the one read head on that disk. Very bad for performance.
Ideally, it should be a dedicated, separate internal hard drive, Figure on at least 35 times or more the size of your largest file for scratch. I keep a dedicated 160GB internal drive as my primary scratch disk.
You should not be running a G5 with less than 4GB of installed RAM. 512 MB would be ludicrous, but even 1GB is pathetic little RAM.
I agree that your hard drive sounds like it's going south. Get two new, large hard drives, at least 250GB each. -
Hello -
I would be grateful if someone can help me...
In CS6 (Windows 7), I am trying to add filter effects like the Radial Blur....I have created a new layer, applied the effect (the filters are not greyed out like I've heard others complain about)...but no effect is ultimately applied.
I even get the dialog box where I chose the center point, etc, so it seems everything is OK up until I press "OK" to apply the effect.
I also tried the other filters and I get the same (lack of) result.
I tried a Red Giant external plug-in in the same menu, and that worked fine.
I read somewhere that I need to make sure my file was RGB, which it is.
I am using Photoshop CS6 via Adobe Lightroom 5.3.
Can anyone help me troubleshoot? Thank you!!!
DarrenThank you both for the replies.
Yes, all my channels are active...and my image is RGB / 16 bit.
BUT, after further testing, I was able to view the filter effects if I did NOT apply another filter first.
For example, On duplicate layer #1, I succesffully created a lighting effect via Red Giant Knoll Light Effects. I can see the effect.
On duplicate layer #2, I made a radiant blur effect with the built-in PS blur filter. However, this one is NOT visible. HOWEVER, if hide (or turn off visibility) of each of the effect layers, i can see the other effect.
It seams like I need to make the layers transparent somehow, so that both show through the other.....it's almost like the 1st effect is blocking visbility of the other. Does that make sense?
One option is for me to combine the main backgound layer with one of the effects, but then I lose the ability to adjust that layer every again.
Hmm.... -
BT Desktop Help still won't work with Windows 7 64...
THis has been going on for a while now. It just won't launch. Emails and screen sharing sessions have produced nothing. One phone call to a representative resuilted in them telling me that the 64 bit Windows 7 version was not available yet - but wait a week or so. I've tried the latests versions and still doesn't work althougth it works fine on Vista. Anyone else still having problems?
Waiting for a call now from level 2 support but i'm not hopeful.Its only a diagnostic tool and has nothing to do with getting the best speed.
It can diagnose simple problems and fix them if possible, reducing the number of calls to the helpdesk
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
Please Help--It Won't Work At All!!!
Today when I was using my iPod, the battery went completely down, to the point where I had to charge it. I plugged it into the computer, and iTunes didn't come up. So I took the USB cable out and plugged it back in. Still didn't work, so I manually brought iTunes up. My iPod is all black, and nothing works. On iTunes, it doesn't give me the option to sync my iPod. The battery is totally drained, so I can't toggle it or reset. Can someone please help me??!!??!!
KellieQuicktime or Quicktime Pro (which iTunes uses) don't convert "muxed" ( muxed means multiplexed where the audio and video are stored on the same track) video files properly. It only plays the video and not the audio.
See:iPod plays video but not audio.
You need a 3rd party converter to convert the file with both audio and video.
See this for help: Guide to converting video for iPod (Mac/Windows). -
Macbook Pro and Monitor help - Now won't work??
Ok so I have been using my i7 Macbook Pro 15" with a Dell Monitor fine.. but then started to get the odd flickers.. I was told this was a Mac issue and many many people had this..
Now when I plug in, my Monitor defaults to the orange standby light and it won't come on at all when connected to the Mac??!
I am using DVI with an Apple Thunderbolt adaptor so i can use the Thunderbolt connection on this newer MBP.
I took the monitor off the Mac and connected via DVI to a PC Laptop and the Monitor sprang into life and works great!!!
So I know its not the Monitor
Any solution to making this work again on the Mac????Hi,
Could you please confirm the CC application you are using.
It would be great if you post a screenshot of the problem.
Regards,
Sumit Singh -
Hi all! I'm runnigOS 10.3.8 on my iBook. I was trying to figure out a better way to burn CDs (it drives me crazy that it won't let me save the project). Anyway, when I go to the Apple help menu, I get the following message: No matching help topics were found. It then goes on to explain how I should use different words to find what I'm looking for... but there's no place to enter the words.
Any suggestions? Thanks!
JulieHi Julie,
this might help: FIXED: Help Viewer crashes or shows blank window
If this answered your question please consider granting some stars: Why reward points? -
HELP Hyperlinks won't work in Adobe Muse
Can anyone tell me why Adobe Muse would suddenly not allow me to hyperlink anything including text, images and photoshop buttons mid way through building a site. I can't find a reason or solution anywhere?
Sort of the same problem. Hyperlinks will not show up in colour, only the underlining works!?
-
Mail Clean Install Help: Mail Won't Work After Migrating to 10.6 from 10.4
I cannot get Mail to open after migrating from 10.4 into 10.6. Mail tries to import my 10.4 folders and messages and then quits unexpectedly. I want to do a clean Mail install to see if I can resolve the problem, but don't know how to do so.
All advice is greatly appreciated.
-BrianMail, the application, should not cannot contain any message data assets. The Mail application must sit in the Applications folder, and be usable to every User Account on the Mac, and not just yours (understand you might be the only user, but making a point).
Mail, the folder of data for just your emails, should properly be at Home/Library/Mail.
Let me ask again -- in the Applications folder is there an Icon for Mail, and is it the Icon of a postage stamp, or is it perhaps the Icon of a folder?
However, let me note, that now that I have booted back into Snow Leopard, and used Get Info on the Mail Icon in the Applications folder, it is reported to be 77.5 MB! Looking at it from other boot volume (Leopard) does not see all the elements of its "package" apparently. My apologies.
Now it is time for a different test -- Create a New User Account, and as that New User launch Mail and try setting up one new email account - if POP select to leave messages on the server. See the following if not familiar with adding a new user account:
http://docs.info.apple.com/article.html?path=Mac/10.5/en/8235.html
The reason for doing this is to test the Mail app itself, and not to permanently switch to a new user account. Tell me if the behavior continues in that New User Account with Mail?
Ernie -
I've just updated my iPhone to the new iPhone OS and now it won't work and iTunes won't recognise that it's there. I've uninstalled iTunes and reinstalled twice and it's not working. Please help.
I have not had wifi since November when I upgraded to the newest IOS version. I called the Apple help line and they told me some things to do and I tried them all and they worked for a few hours and then wifi shut off again. I kept doing what they told me and it worked for a couple more days and then I could never turn it on again. My blue tooth doesn't work either. I had to actually increase my data usage with AT&T becuase of this. When I did that in December I went to the Apple store and was told that it is a hardware issue and since my phone is out of warranty I would have to pay for a new phone because they could not fix the issue. My upgrade isn't up until June 2014 so not only do I have to wait for the upgrade and I am not paying for a new phone but I have to pay $10 plus extra a month on my cell phone bill because I was going over on my Data!!! I have been beyond upset about this and Apple is not doing anything about this nor did they offer up some way to resolve the issue because obviously it is not just some rare incident if several people are having this issue. Who knows how many people out there have had this issue and have not said anything about it. Now there is a newer update that I can't do because it requires wifi in order to download.
June can not get here fast enough and I may not go back to Iphone after dealing with this for so long with no help from Apple. -
I have an ipad air and I'm trying to set up a telus email on it but it won't work. I keep getting a message saying username or password for IMAP is incorrect...please help!
This has nothing to do with iPhoto. When I have this type of problem I call tech support for my email service. They probably are the only source of the correct settings
LN
Maybe you are looking for
-
IPad Air won't let me update or download my apps, how can I fix this plz let me know
My iPad Air will not let me update or download any apps! Plz let me know how I can fix this problem thank you
-
Face Time won't verify on either iPhone 4S or iPad 2
Face time on either device will not verify my email address,which is the same MobileMe account I use for iTunes, email etc. I have see other people have problems with face time but none of the solutions have worked so far. Thanks for any suggestions.
-
X240 with 2 ThinkPad Pro Docks not detecting screens
Hello all I have a Lenovo x240 with 2 ThinkPad Pro Docks one for the office and one home In office I have, a screen connected to dock via DVI port and its working fine In home, i have a screen connected to dock via vga port and this one is not wor
-
I tried to restart my computer - but when i opened the website the problem was still there. When I go to a different website the problem is not there.
-
Hi, We have an older dual g4 running mac os x server and a studio full of laptops, pcs, printers etc. This machine running server is required to share all work in progress for the design side of the business. However I've been having some issues with