HELP: Flash Drive accepts files when I run them files corrupted

So I have my flash drive partitioned in the Master Boot Record because in all other forms it will not appear on my computer. However, when it is partitioned like this, it will appear to accept files when I transfer them, but when I run them I receive a files corrupted message or error-43.
I understand the Master Boot record is intended for windows, but when I partition the drive in GPT or Apple Partition Map the drive is inaccessible on my computer completely. I do not care about being able to transfer files to a PC, I just want to use my flash drive back-up and save files too. If anyone knows how I could do this I would really appreciate it.
I searched the forums and could not find anything that has worked for me so if someone knows where it is I would appreciate a link, or if you know how to do it, I would appreciate the advice!
Thanks

thebigwillyp wrote:
I know my flash drive worked on a mac because it worked months ago, it just will not now for some reason.
Nearly everything that stops working used to work at some point. If you cannot format the drive on either a Mac (why not go back to that Mac it worked on "months ago?") or a PC, then for all practical purposes it's dead. Return if under warranty, or get a new one.

Similar Messages

  • Could not read Log4j configuration file when I run jar file

    Hi,
    I'm using Log4J in my application..
    I configure the log4j, as follows;
    PropertyConfigurator.configure("properties/logging.properties");and then go on to use it.
    The .properties is in the root when I jar my source. I use Ant to Jar the file. It all works good when I run the jar file from ant.
    The problem is when I run the jar file by double clicking on it, I get an error
    " Could not read configuration file [properties/logging.properties]."
    I tried the following options;
    PropertyConfigurator.configure("/logging.properties");
    PropertyConfigurator.configure("./logging.properties");
    PropertyConfigurator.configure("../logging.properties");But in all cases, I get corresponding errors on running the jar file through Ant:
    log4j:ERROR Could not read configuration file [logging.properties].
    log4j:ERROR Could not read configuration file [./logging.properties].
    log4j:ERROR Could not read configuration file [../logging.properties].
    I want to be able to run the Jar by double clicking on it or through Ant.. Would any one know how to fix this issue so that I can use both methods..

    Keep your properties file inside the root folder of your application.It is working fine

  • Read a txt file when I run jar file

    Hi all,
    I have a jar file. In ir there are:
    /file.jar
       |----/pack
       |        |----MyClass.class
       |        |----file.txt
       |
       |----/META-INF
       |        |----MANIFEST.MFI want: when I execute the jar file java -jar file.jar from the java class MyClass to read the file.txt
    When I run this the error is:
    C:\Documents and Settings\pc\Escritorio>java -jar file.jar
    java.io.FileNotFoundException: file:\C:\Documents%20and%20Settings\pc\Escritorio\file.jar!\pack\file.txt (El nombre de archivo, directo
    rio o etiqueta del volumen no es valido)
            at java.io.FileInputStream.open(Native Method)
            at java.io.FileInputStream.<init>(Unknown Source)
            at java.io.FileInputStream.<init>(Unknown Source)
            at java.io.FileReader.<init>(Unknown Source)
            at pack.MyClass.main(MyClass.java:20)
    Exception in thread "main" java.lang.NullPointerException
            at pack.MyClass.main(MyClass.java:31)the code into the java class is:
    package pack;
    import java.io.BufferedReader;
    import java.io.ByteArrayOutputStream;
    import java.io.File;
    import java.io.FileInputStream;
    import java.io.FileNotFoundException;
    import java.io.FileReader;
    import java.io.IOException;
    import java.io.InputStream;
    public class MyClass {
         private static String version = null;
         static String fich = "file.txt";
         public static void main(String[] args) {
              BufferedReader br = null;
              File file = new File(fich);
              try {
                   br = new BufferedReader(new FileReader(MyClass.class.getClass().getResource("/pack/file.txt").getPath()));
                   String j= null;
                   while ((j = br.readLine())!=null){
                        version = j;
              } catch (FileNotFoundException e) {
                   e.printStackTrace();
              } catch (IOException io){
                   io.printStackTrace();
              } finally{
                   try {
                        br.close();
                   } catch (IOException e) {
                        e.printStackTrace();
              if (version != null)
                   System.out.println("I have read : "+version);
    }in MANIFEST.MF file:
    Manifest-Version: 1.0
    Main-Class: pack.MYClassthanks very much

    thanks you!!
    I have read the file, but I have put the package when I write the file.txt, beacuse If I don't put this, givas me NullPointerException
    Now I have
    InputStream in = Main.class.getResourceAsStream("/pack/file.txt");
    InputStreamReader isr = null;
    BufferedReader reader = null;
    try {
              isr = new InputStreamReader(in, "ISO-8859-1");
              reader = new BufferedReader(isr);
              while ((j = reader.readLine())!=null){
                   version = j;
              reader.close();
    } catch ...Thanks very much

  • I've tried to install flash player several different times ans each time i get a connection error message.It downloads fine and when i run the file to start install,it installs up to 5% and then i get the connection error message.Can someone please help m

    I've tried to download the flash player several different times and each time i get a connection error message.It downloads fine and when i run the file to start install, it installs up to 5% and then i get the connection error message. I've tried disabling my antivirus software, closing my browser for install and nothing.Can someone please help me? I'm using Firefox.

    Hi!
    I had the exact same issue, being on a mac. If you are on a mac and the connection error message occurs, then use this link http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg
    It allows you to download it offline, which is what I used.
    Hope I was help!
    -Haroon

  • I converted aif files to mp3 files in I tunes so I could put them on a flash drive.  Now when I transfer an album to the flash drive I get both the aif files and the mp3 files in the flash drive.  How do I get the iTunes to only copy the smaller file?

    I converted aif files to mp3 files in iTunes so I could put them on a flash drive.  Now when I transfer an album to the flash drive I get both the aif files and the mp3 files on the flash drive.  How do I get the iTunes to only copy the smaller file?

    My suggestion to use the smart playlist was more along the lines of making one list with rules to show everything in your library as long as it was kind "mpeg" (= mp3).
    Smart playlists cannot be edited manually, only by changing the rules.  You can use them as the basis for another smart playlist though.
    There is added overhead to using smart playlists, so don't go overboard.

  • I am new to the Apple world and yesterday i bought an APPLE IPAD (4th Gen) .. My Question is "Can we connect a flash drive to the IPAD4 and transfer pdf files to and fro"??

    Hi all,
    I am a newbie to the Apple World and Yesterday I bought an APPLE IPAD (4th Generation).. My primary purpose is to read pdf files on IPAD4.
    I have 3 questions ..
    1. Can we connect a usb flash drive to the ipad4 and read pdf files from it?
    2.  I am using windows since 2000 and accustomed to the file explorer and file management in it. Can I get such kind of environment in IPAD4 ?
    3. Do I have to sync the IPAD too often?
    Regards,
    Manikanth

    Sandisk has recently come out with a device
    http://www.sandisk.com/products/wireless/flash-drive/
    Never used it so I can't comment on whether or not it works well. There are very few devices out there that allow file transfer without going through iTunes or via the internet. IMHO, one real weakness of the iPad, great for consuming data, however not very fully featured when it comes to moving data around, especially if that data doesn't come from iTunes or other online source.
    there is also a device called a WiDrive
    http://www.kingston.com/us/usb/wireless
    that is also a wireless drive for iPads.

  • How can I save my data and the date,the time into the same file when I run this VI at different times?

    I use a translation stage for the experiment.For each user in the lab the stage position (to start an experiment) is different.I defined one end of the stage as zero. I want to save the position , date and time of the stage with respect to zero.I want all these in one file, nd everytime I run it it should save to the same file, like this:
    2/12/03 16:04 13567
    2/13/03 10:15 35678
    So I will track the position from day to day.If naybody helps, I appreciate it.Thanks.

    evolution wrote in message news:<[email protected]>...
    > How can I save my data and the date,the time into the same file when
    > I run this VI at different times?
    >
    > I use a translation stage for the experiment.For each user in the lab
    > the stage position (to start an experiment) is different.I defined one
    > end of the stage as zero. I want to save the position , date and time
    > of the stage with respect to zero.I want all these in one file, nd
    > everytime I run it it should save to the same file, like this:
    > 2/12/03 16:04 13567
    > 2/13/03 10:15 35678
    >
    > So I will track the position from day to day.If naybody helps, I
    > appreciate it.Thanks.
    Hi,
    I know the function "write to spreadsheet file.vi"
    can append the data
    to file. You can use the "concatenate strings" to display the date,
    time as well as data... Hope this help.
    Regards,
    celery

  • How can I do to acquire and save date in the same time and in the same file when I run continual my VI without interrupti​on.

    I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
    So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
    Thank you in advance.
    Regards,
    Attachments:
    HP8563E_Query_Amplitude.vi ‏37 KB

    Hi,
    Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
    So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
    I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
    So I want to acquire 1 time amplitude from spectrum analyser each 5
    period of the signal that I am acquiring from parallel port.
    So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
    Here is a new algorithm.
    1) i=0 (counter: number of period)
    2) I read value from In Port
    3) If I acquire a period
    i= i+1 (another period)
    4) If i is multiple of 5 (If I read 5 period)
    acquire 1 time amplitude and write to the same
    file this amplitude and the corresponding distance
    Distance = 12*i). Remember each period of signal
    Corresponds to 12 Inches).i has to take these
    values: 5,10,15,20,25,35,40,45,50,55,60............
    5) Back to 2 if not stop.
    Thank you very much for helping me.
    Regards,
    Attachments:
    Acquire_Amplitude_00.vi ‏59 KB
    Figure_Algorithm.doc ‏26 KB

  • I'm trying to transfer a quicktime file, when I drop the file in my hard drive I get the following error message "The operation can be completed because an unexpected error occured (error code 0). It only happens with this particular drive.

    I'm trying to transfer a quicktime file, when I drop the file in my hard drive I get the following error message "The operation can be completed because an unexpected error occured (error code 0). It only happens with this particular drive.

    Run Disk Utility and try to verify/repair the drive to see if it reports and fixes anything.

  • Some snaps show up as black screens when I try to view them as single pictures.Even when I run them in slideshows they show up as black screens.These are jpeg files.How can I avoid this happening?

    Some snaps show up as black screens when I try to view them as single pictures.Even when I run them in slideshows they show up as black screens.These are jpeg files.How can I avoid this happening?

    There are several possible causes for the Black Screen issue
    1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
    2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
    3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
    4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
    5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    If none of these help:
    As a Test:
    Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • Why is my external hd & flash drive locking up when transferring .m4a?

    Why is my external hd & flash drive locking up when transfering .m4a?
    I recently upgraded my software to 10.6.3 on my iMac Intel Core 2 Duo. When I transfer movie files specifically to my USB flash drive and external hard drives, they now cause my imac to freeze. If the file size is larger than 500K I experience this problem.
    What is the issue?

    They are formated as MS-DOS Fat
    Thanks

  • Hi. I transferred an iMovie file to a USB flash drive. How can i retrieve the file back to iMovie? I am unable to do it

    Hi. I transferred an iMovie file to a USB flash drive. How can i retrieve the file back to iMovie? I am unable to do it

    Hello there,
    It sounds like you have a video file you exported from iMovie that you would like to import back into the program. Depending on the version of iMovie the process is a bit different so choose the correct article for your version:
    iMovie '11: Import video from movie files
    http://support.apple.com/kb/ph2153
    Or
    iMovie (2013): Import media on your computer
    http://support.apple.com/kb/PH14676
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • Flash won't save or test run my files

    Hi, I guess this might have already been posted before, most
    things I post have....
    When I have copied my fla files over to my laptop so I can
    take work home with me, I can't then test movie, publish or save
    the files.
    How come? I just get this message:
    "Error creating Flash Movie File.
    Be sure the destination file is not reed-only or opened by
    another application. Also, check that the file name is not too
    long."
    None of the files are reed only and it only happens when I
    move them to my laptop.
    I really need to get this work done this weekend but can't if
    they don't run on my laptop.

    Not sure which OS you're using, but if you use Vista or Win7, the first time you launch DW, right-click and run as Administrator.  Set-up your site definition settings, extensions, browsers and other preferences from this elevated mode.
    Hope this helps,
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    http://alt-web.com/
    http://twitter.com/altweb
    http://alt-web.blogspot.com

  • Help me, please. generate error when i run web application

    i want you help me. I run web application on local window very well. I deploy web application success on Linux. But it generate error when run it. My web application use : struts framework, hibernate framework, tomcat 4.1, PostgreSQL 7.3 Database.
    why error generate when i run web application ?
    Thank you very much
    WARN 13-09-2006 15:51:41,674 org.apache.commons.beanutils.MethodUtils (MethodUtils.java:583) - Cannot use JVM pre-1.4 access bug workaround die to restrictive security manager.
    WARN 13-09-2006 15:53:14,880 net.sf.hibernate.cfg.Environment (Environment.java:529) - could not copy system properties. System properties will be ignored.
    WARN 13-09-2006 15:53:16,201 net.sf.hibernate.cfg.SettingsFactory (SettingsFactory.java:107) - Could not obtain connection metadata
    org.postgresql.util.PSQLException: Something unusual has occured to cause the driver to fail. Please report this exception.
         at org.postgresql.Driver.connect(Driver.java:209)
         at java.sql.DriverManager.getConnection(DriverManager.java:512)
         at java.sql.DriverManager.getConnection(DriverManager.java:140)
         at net.sf.hibernate.connection.DriverManagerConnectionProvider.getConnection(DriverManagerConnectionProvider.java:101)
         at net.sf.hibernate.cfg.SettingsFactory.buildSettings(SettingsFactory.java:84)
         at net.sf.hibernate.cfg.Configuration.buildSettings(Configuration.java:1160)
         at net.sf.hibernate.cfg.Configuration.buildSessionFactory(Configuration.java:794)
         at com.canhph.vietnamjob.db.HibernateSessionFactory.currentSession(HibernateSessionFactory.java:48)
         at com.canhph.vietnamjob.dao.company.DAOJob.getHotJob(DAOJob.java:122)
         at com.canhph.vietnamjob.bussiness.company.BussinessJob.getHotJob(BussinessJob.java:74)
         at com.canhph.vietnamjob.actions.home.PortalAction.execute(PortalAction.java:230)
         at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:421)
         at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:226)
         at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1164)
         at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:397)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Unknown Source)
         at org.apache.catalina.core.ApplicationFilterChain.access$0(Unknown Source)
         at org.apache.catalina.core.ApplicationFilterChain$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(Unknown Source)
         at com.canhph.vietnamjob.common.FilterCharacterEncoding.doFilter(FilterCharacterEncoding.java:53)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Unknown Source)
         at org.apache.catalina.core.ApplicationFilterChain.access$0(Unknown Source)
         at org.apache.catalina.core.ApplicationFilterChain$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(Unknown Source)
         at org.apache.catalina.core.StandardWrapperValve.invoke(Unknown Source)
         at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(Unknown Source)
         at org.apache.catalina.core.StandardPipeline.invoke(Unknown Source)
         at org.apache.catalina.core.ContainerBase.invoke(Unknown Source)
         at org.apache.catalina.core.StandardContextValve.invoke(Unknown Source)
         at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(Unknown Source)
         at org.apache.catalina.core.StandardPipeline.invoke(Unknown Source)
         at org.apache.catalina.core.ContainerBase.invoke(Unknown Source)
         at org.apache.catalina.core.StandardContext.invoke(Unknown Source)
         at org.apache.catalina.core.StandardHostValve.invoke(Unknown Source)
         at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(Unknown Source)
         at org.apache.catalina.valves.ErrorDispatcherValve.invoke(Unknown Source)
         at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(Unknown Source)
         at org.apache.catalina.valves.ErrorReportValve.invoke(Unknown Source)
         at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(Unknown Source)
         at org.apache.catalina.core.StandardPipeline.invoke(Unknown Source)
         at org.apache.catalina.core.ContainerBase.invoke(Unknown Source)
         at org.apache.catalina.core.StandardEngineValve.invoke(Unknown Source)
         at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(Unknown Source)
         at org.apache.catalina.core.StandardPipeline.invoke(Unknown Source)
         at org.apache.catalina.core.ContainerBase.invoke(Unknown Source)
         at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:223)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:594)
         at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:392)
         at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:565)
         at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:619)
         at java.lang.Thread.run(Thread.java:534)
    Caused by: java.security.AccessControlException: access denied (java.net.SocketPermission localhost resolve)
         at java.security.AccessControlContext.checkPermission(AccessControlContext.java:269)
         at java.security.AccessController.checkPermission(AccessController.java:401)
         at java.lang.SecurityManager.checkPermission(SecurityManager.java:524)
         at java.lang.SecurityManager.checkConnect(SecurityManager.java:1023)
         at java.net.InetAddress.getAllByName0(InetAddress.java:1000)
         at java.net.InetAddress.getAllByName0(InetAddress.java:981)
         at java.net.InetAddress.getAllByName(InetAddress.java:975)
         at java.net.InetAddress.getByName(InetAddress.java:889)
         at java.net.InetSocketAddress.<init>(InetSocketAddress.java:114)
         at java.net.Socket.<init>(Socket.java:124)
         at org.postgresql.core.PGStream.<init>(PGStream.java:58)
         at org.postgresql.core.v3.ConnectionFactoryImpl.openConnectionImpl(ConnectionFactoryImpl.java:77)
         at org.postgresql.core.ConnectionFactory.openConnection(ConnectionFactory.java:65)
         at org.postgresql.jdbc2.AbstractJdbc2Connection.<init>(AbstractJdbc2Connection.java:117)
         at org.postgresql.jdbc3.AbstractJdbc3Connection.<init>(AbstractJdbc3Connection.java:30)
         at org.postgresql.jdbc3.Jdbc3Connection.<init>(Jdbc3Connection.java:24)
         at org.postgresql.Driver.connect(Driver.java:195)
         ... 54 more
    Message was edited by:
    balzacvietnam

    Sounds like the java version on your Linux machine is not working with the PostgreSQL JDBC driver.
    Try updating your JVM on the Linux server.

  • Usb flash drive not mounting when inserted (SOLVED)

    Hi,
    I am (now) using fvwm-crystal with rox as my file manager and when i insert a usb flash drive in to a usb port nothing happens. I check /media and nothing is there. Yes i do have hal started at boot.
    I reinstalled arch with xfce4.
    Last edited by theringmaster (2007-10-09 20:28:42)

    Well, there are the on-line manual pages:
    man ivman
    man IvmConfigActions.xml
    man IvmConfigBase.xml
    man IvmConfigConditions.xml
    man IvmConfigProperties.xml
    And there are examples in the default files (/etc/ivman/) provided with Ivman.
    But that you probably already know. I'm not familiar with any other docs, except maybe tutorials on the net if you count them as docs

Maybe you are looking for

  • Preview rasterizing PDFs- how do you stop this?

    I really am starting lean more on OSX PDF tools- but I have one recurring problem that is causing me a bit of pain. Some PDF files get rasterized when preview opens them. Then from that point on they look bad and have "no text in them" (can't be sear

  • HP LaserJet 1005 not printing via USB

    Hi, I am not being able to print on a HP 1005 connected to the USB port of a Time Capsule. I have a Macbook PRO, with the latest OS. The MAC finds the printer but shows the type as BONJOUR. But as far as I know, BONJOUR is for windows. Mac direct t t

  • Only 2gigs of Ram showing with 4gigs installed

    Hello! My apologies if this is in the incorrect forum. First let me say I've had this problem before and it was resolved by switching the memory cards in their seats. I have installed two,  2GB memory cards (4 gigs total) but only 2GB are showing up.

  • Why are clicked links to Bookmarks not consistent in color?

    I've created hyperlinks to bookmarks. Some change color when clicked and some don't.

  • Help - cannot remove CD or boot or get back to OS X!!!

    I'm on an early 2008 Mac Pro. I inserted a 32 bit XP SP2 CD when boot camp told me to, and it starts up with Waiting for 3ware controller to initialize- and hangs. I've tried turning my RAID on (which I had no intention of using with Boot Camp), but