Help for ICSS registe a B2C account
Hello All,
I want to registe a B2C account in ICSS, but even I input all fields, the button of 'submit' still can not be click. I do not know why. Are there any configuration I have not do?
It is urgent. Need for your help.
Hi Gordon,
Please follow the following note number 885866 at http://servce.sap.com/notes.
In this note it is clearly defined the solution to your problem.
Reward points if it helps.
Regards
Pranay
Similar Messages
-
Help! someone registered I-Tunes account with my email address!
I recently bought an IPhone! Yippee!
I am new to Itunes, and registered for a new account. I-Tunes pop up said that my email address was already in the system, and asked me if it was me (my email address).
So I clicked "forgot my password" thinking that my husband may have set up an account for us.
I reset my password, and found an app that I wanted (free) and downloaded the app and tried to sync my phone. The app loaded on Itunes, but would not sync with my phone.
So, I went to "my account" and there was someone else's name, contact info and credit card info on linked to my email address.
Anyone know how this is possible?
I contacted my internet provider, and they could not find any other name listed under my address.
Fortunately, I am an honest person, but am a littel freaked out at how I could access this man's account by accident.
We have the same last name and first initial, and he lives in another state.
Can anyone tell me how this happened?
I write this here tonight because I would like to get this straightened out as soon as possible, and could not call support as they are not open until tomorrow morning.
I would appreciate any help , and thank you in advance for your time with this matter.
Hope to hear from someone soon,
RhonniePossibly it is something nefarious, but more likely he simply mistyped the info. Since your names are similar, by any chance are the email addresses similar?
Depending how this shakes out, you and he could be causing confusion for each other on a regular basis. Since you have barely started using your account, there is not much downside for you start a new account with a different email address. Redownload the one free app on the new account, and forget about the old account. -
Help for Calling RFC in B2C application.
hi,
We had written one RFC and all java classes related to that.
we are able to call RFC in b2c application.we are calling RFC on loading of JSP.
now my requirement is to call same RFC in other JSP but muliple times(in a for loop).But how can i do that?
one thing is sure we cannot calll this RFC on loading of new jsp page.we have to call inside jsp page(in a loop).
there is any way?
please help me out.
thanks in advance.
jayesh talrejaTwo things I would like to say here:
1) Calling RFCs directly from JSP is not supported so we need to use interfaces and backend classes.
2) Calling an rfc is java code and in jsp we write java code along with html to make it dynamic...so dynamic
call is also possible.
ie. suppose we want to call our rfc for fetching some data from the backend based on the data entered at item level once the user clicks on update button on order creation page.So we can write the code like below
<%-- messages --%>
<%@ include file="/b2b/itemErrMsg.inc.jsp"%>
<% } %>
<%-- ui.showItemDetailButton() --%>
<% } %>
<%-- ui.isBOMSubItemToBeSuppressed() --%>
<%--Start of addition by Arshid --%>
<!-- From here our custom rfc call is starting-->
<%
String arg1[]= {"crm~isa~isacore~resources_en"};
if((JspUtil.removeNull(item.getProduct()).length()) !=0 && !(JspUtil.removeNull(item.getNetValue()).equals(WebUtil.translate(pageContext,"yourcompany.order.minimumValue",arg1))) )
String baseUOM = "";
int enteredQuan= 0;
double minOrderQuan = 0.00;
double roundingValue = 0.00;
BusinessObjectManager isaBOM = (BusinessObjectManager)userSessionData.getBOM(BusinessObjectManager.ISACORE_BOM);
User user = (User)isaBOM.getUser();
Shop shop = (Shop)isaBOM.getShop();
String distrChannel = shop.getDistributionChannel();
String sod = shop.getSalesOrganisation();
Z_CustomBusinessObjectManager customBOM = (Z_CustomBusinessObjectManager)userSessionData.getBOM(Z_CustomBusinessObjectManager.CUSTOM_BOM);
//Z_prodInfoValue is a bo that will hold the data returned from rfc call
Z_prodInfoValue z_prodinfo = customBOM.getZ_prodInfobo().getProdInfo(Zeropadding.productInfoNoPadding(item.getProduct()), sod, distrChannel);
<!-- Call ends here and this piece of code is called for every item on clicking on update buton -->
Although this is not a good code design as instead of making multiple calls to the backend we can get the above thing done in a single call also.I wrote this code just to give an example .
This clearky proves we can have dynamic calls to the backend through jsps also.
But Jayesh, your question is not very clear to me.
If its about for loop, where you want to call the backend for multiple times with different set of values than i would rather suggest you to create lists of these different datasets and send these in a single call to the backend and fetch the data similarily in tables in a single call.
Regards,
Arshi -
Help for scripting Multipliying inflation per Account Value
Hello Experts,
I am developing a script logic in BPC 10 to get the accounts month value multipied by the month inflation. Here is my script:
// In this part I am setting my scope:
*XDIM_MEMBERSET AUDITTRAIL= IC
*XDIM_MEMBERSET ENTITY = US
*XDIM_MEMBERSET INTERCO = I_US
*XDIM_MEMBERSET PRODUCT = ProductA
*XDIM_MEMBERSET RPTCURRENCY = USD
*XDIM_MEMBERSET MEASURES = PERIODIC
// In this section I am searching the inflation of January, 1st. QUESTION, how do i do this value dynamic so I can return the value of each month?
*LOOKUP Rates
*DIM Val: CATEGORY="Actual"
*DIM Val: INPUTCURRENCY="AED"
*DIM Val: R_ACCOUNT= "AVG"
*DIM Val: TIME= "2014.01"
*DIM Val: MEASURES= "PERIODIC"
*DIM Val: R_ENTITY="Global"
*ENDLOOKUP
// In this section I am multipliying the result of the lookup (inflation) with the Accoutn value. But i see not results, It only work when I set a specific account, but when I set BAS oif the accoutn PL100 it doesen WORK. 2nd question How do i make this to work?
*When ACCOUNT
*IS BAS(PL100)
*REC(FACTOR=(1+LOOKUP(Val)), CATEGORY="Actual")
*ENDWHEN
Any idea how can I solve the issues of this script logic?
Thank you in advance for your answers.
Best Regards.Hi Sebastian,
First I don't see TIME scope of this script.
"In this section I am searching the inflation of January, 1st. QUESTION, how do i do this value dynamic so I can return the value of each month" - simply remove this line:
*DIM Val: TIME= "2014.01"
then LOOKUP will use TIME from the current record in WHEN/ENDWHEN
Second, instead of *IS BAS(PL100)
Use scope for ACCOUNT:
*XDIM_MEMBERSET ACCOUNT=BAS(PL100)
and *IS *
Vadim -
I Need Help For Setting Up A New Account
So, obviously in Mail, I have my .Mac Account. I would also like to add my MSN hotmail account. There are only a couple of issues. I can't figure out if the hotmail account is POP, IMAP, or Exchange. And on top of that, I don't know what to put after I've chosen one. There is a space where I'm supposed to put the "Incoming mail sever", except, I have no idea what that is. If it is relevant, my hotmail email is: [email protected]
Thank Youhttp://versiontracker.com/dyn/moreinfo/macosx/18189
was the solution I used to use, back when I thought it was still a good idea to use msn/hotmail -
Adding f4 help to wbs element field in account assignment tab of me21n
My requirment is to create f4 help for wbs element field in account assignment tab of me21n,
I have to pick wbs elements according to plant and storage location assigned in item overview of purchase order.
for that i have created a ztable. and use it in f4 code, or help me if any other suggestion u have.
thanks,
Amol.Try to use screen-exit for assigning the serach help. There is one screen exit for PO ..
Check the enhancement - MM06E005 ,
Create project in cmod and use this enhancement.
use the PROCESS ON VALUE-REQUEST event and use FM 'F4IF_INT_TABLE_VALUE_REQUEST'
hope this will resolve the issue.
anya -
Help - I have an apple id account, where is my iPod and iPad registered, but also the iPod of my daughter. How can I make an account for my daughter and keep all the apps she has on her iPod and in her own iTunes?
Sorry, content bought with one Apple ID cannot be merged or transferred to another Apple ID.
-
Need help setting up 3 different iCloud accounts for my kids (so each has own iMessanger)using same Apple ID (mine) ....they don't have their own separate email addresses to work from...how do I do this?
Any devices connected to the same icloud account can sync all the data on that account. For this reason an icloud account is really for a single user.
On a mac, if each user has their own account, then the itunes for that mac account should be set up to connect to that user's icloud account (System preferences>icloud). -
I have 2 iphones registered under same account, but both phones had different contacts in them, somehow icloud duplicated, exchanged them, and I turned off the icloud on one of them, while doing that it asked me if I want to keep them on my phone or not. I pressed the one saying not to keep them. I deleted all of them and could not restore the contacts, how do I restore it? when I sign in to my icloud account online it only shows the contacts that were on the other phone. plz help
I access a personal iPhone and iPad, and a business iPhone with the same Apple ID.
The iPhone's passcode lock feature is completely separate from another iPhone or iOS device.
All apps, all paid and free apps include DRM protection which is tied to the Apple ID that was used to download the apps. If some apps were downloaded with one Apple ID and then a new Apple ID is created, in order to download an app update that was installed with the original Apple ID requires using that Apple ID and password. -
My checking account was debited by itunes for a subscription i did not order. How do I go about having it taken off? The entire Apple website and the itunes website is competely non-helpful for resolving problems. They should make their site equally as unfriendly when it comes to enticing you to buy their products.
You could simply type "Contact itunes support" into the google search bar. This would give you the link to contact itunes support.
Or you could just click the word Support at the top of this page, then click the link under Contact Apple Support. -
hi everyone. i need help for resettting my airport express as a repeater. i bought is airport express 2nd hand. so now this one already registered to old wireless.
could anyone have any advice. thank you.
now the airport express is blinking yellow color.
my main base is using time capsule. this is a new one so when i first turn it on and set it up in airport utility its very easy.
now setting the repeater (airport express) is ............ ???
thanks everyone.Do a factory reset, then it'd be like it's new from the Apple Store.
http://support.apple.com/kb/ht3728 -
In my third-party web application of Office 365, I want to have access to the contacts, events and emails of all the users from the organizations who installed my app. The thing is I don't want that all these users have to grant me access, I just want one
admin of the org to grant access for my app and then be able to retrieve the data I need for all the users.
To test for one organization, I logged in as the admin and proceed to the Oauth2 authentication to retrieve the access token and in the first request (the GET one to retrieve an authorization code) i add the parameter
prompt=admin_consent.
With this access token, I can access the data (emails, contact, event) of the admin
for instance for the contacts
uri: https://outlook.office365.com/ews/odata/Users(adminemail)/Contacts
but not the data of the other users of this org with this uri
uri: https://outlook.office365.com/ews/odata/Users(useremail)/Contacts
The only thing I can do is retrieve an access token for each user but it supposed that each user has to authorize the access to the app but it's very cumbersome. So, i don't see what enables the parameter prompt=admin_consent and how to use it. Does anybody
know what it does?
And my question is: how can I do to access the data of all the users of one organization when the access has been granted by one admin?
Thank you!
This was answered on StackOverflow by Dushyant Gill. http://stackoverflow.com/questions/25316175/access-to-my-office-365-third-party-app-for-external-user-a-user-account-is-n/25316678#25316678
You are sending the OAuth request to a tenant specific endpoint of Azure AD. Note the {key_provided} part of your Url - that part represents the tenantid or a registered domain name of an Azure AD tenant. Azure AD throws this error is the user signing in
is not a user in that tenant.
Multi-tenant applications like yours have two options:
Perform home realm discovery yourself and send the SSO request to the correct tenant-specific endpoint of Azure AD: when a new Azure AD organization signs-up for your application, record its tenant ID, and registered domain names. On your login page, ask
the user for their email and try to discover what Org they belong to using the suffix the email.
Use the common endpoint of Azure AD. Instead of the {key_provided} part of the URL, use 'common'. In this case Azure AD will determine the user's tenant and sign-in the user. The token that your application will receive will still be from the user's tenant
(iss claim).
2 is more convenient for apps. However #1 has an advantage when the user's Organization has customized their sign-in page with the company logo etc - in the case of #1 the user will directly be taken to the customized and familiar sign-in page.
I recommend a combination of the two: try determining the user's organization and sending them to the tenant specific SSO endpoint. If you're not able to - send them to the common endpoint. -
Search help for 'Account ID' field in 'Identify Account' section
Hello all,
We are on CRM 5.0.
I want to attach the search help 'BUPA' for the 'Account ID' field in 'Identify Account' view of IC Webclient.
Can you please let me know how I can achieve this.
Regards,
NagHello Glenn,
Thanks for the reply.
Let me rephrase my question.
Account ID is already there as a search field. But I want to add F4 search help for this field.
So when the user hits F4 key, the system should display the 'BUPA' search help so that user can search for the BP number by name, zip code etc.
So I want to attach the search help 'BUPA' to the 'Account ID' field in the screen.
Can you please let me know how to do that? -
Search Help for Account ID and Employee
Hi,
I have a requirement like this:
I have a custom field: Escalation To. For this, I need to provide F4 help which shows Employees and Account ID (ex: Sold to Party/Bill to etc).
So, I used the component - BP_HEAD_SEARCH. However the problem is : In this, I have chosen the filed role - as Employee and clicked on search. But it is not showing all the employees.
And when I used the component - BP_EMPL_SEARCH, it is showing all the employees. I don't know, what is wrong with this.
Could you please help me out for this? How can I provide F4 help which works for both Employees and all other BP's
Thanks,
SandeepHello Glenn,
Thanks for the reply.
Let me rephrase my question.
Account ID is already there as a search field. But I want to add F4 search help for this field.
So when the user hits F4 key, the system should display the 'BUPA' search help so that user can search for the BP number by name, zip code etc.
So I want to attach the search help 'BUPA' to the 'Account ID' field in the screen.
Can you please let me know how to do that? -
Logic for Automatice AccountID generation for B2C Accounts
I have noticed that the accountIDs for B2C accounts are of the form WEB245df2f283ce.
The WEB prefix is a configuration setting.
What is the algorithm or class used to generate this random(?) string. I noticed there is a method CREATE in the class NPAccount but I hoping to use SQL to bulk sync the users/usersAccount table with an external membership database.
Perhaps ... if the only requirement is that the ACCOUNTID's be unique then perhaps I can create my own as long as they don't conflict with any already existing? Would that work if created my own random suffix to the WEB-accountid?I'm not sure what class is used but in the Setup / Config Settings / Netpoint dropdown there is a checkbox for auto generating account id's. You could try unchecking this and see what happens .. I think it tries to create the account based on the userid.
If you want to create your own accounts in code, you're right they just need to be unique so you can use whatever logic you want.
Maybe you are looking for
-
Download link to file saved in BLOB type in database
Hi all, I have made a page where i am letting users upload a file in any format, and i'm saving it to database in BLOB datatype field of a table. The filetype is also saved in a different column of the table. Now I want to retrieve the contents back
-
Why do about 6 applications open when I turn on since Loin installed?
After installing Lion, when I turn on my computer there are about 6 applications open onto the dest top - Why? Can someone please point me to where to make the necessary changes to stop it?
-
I have problem in web and e-mail
hello guys how r u? i have a problem i can't download anything from web (mobile browser) it ask me about the location i want to add my download and then the download box appear but no progress from 0% it stay fix at 0 and i try to download from fenn
-
Can I listen to an audiobook on both my iPad and iPhone or do I have to buy two copies?
I downloaded an audiobook to my iPad. Now I want to listen to the audiobook on my iPhone. How can I do this?
-
Dimension processing failure - Invalid Column Name
Hello I have copied our Account Dimension from Prod to Dev because we are testing 7.5MS. I have Maintained Properties and modified dimension successfully. But when I process i get the foll error : - OLE DB error: OLE DB or ODBC error: Invalid colum