Help for Mouse movement triggers

Hello, All,
I try to use mouse movement triggers (When_Mounse_Enter, When_mouse_Leave, and Whwn_Mouse_move) at form level (block level and item level) in a form, but all of these trigger do not work. It seems like all of them can not be fired.
Anyone can help me? Thanks a lot!
John

Hi, Surendra and Grant,
Thank both of you for help!
I am tring to learn Form Developer. The database and developer suites are installed in one PC. I don't think I am working in web environment.
Except the Mouse Movement Triggers, other mouse trigger work well, such as when_mouse_click, when_mouse_doubleclick.
Any help is very much appreciated.
John

Similar Messages

As3 - Map/Level help for iPhone + movement

I'm making an app for an iphone using CS5 and was wondering the best way to make a map or a level. I want it to be continuous until the player dies which will bring it to the end game frame. An example would be NinJump for iPhone. You keep going and going until you die.
Then my next question.. I feel stupid asking cause i feel like only i have this problem..whenever I do the hitTestPoint check my character goes through the floor in the middle. I tried changing the registration points but when I put it to the bottom for my character it just does swirls... not move so i kind of changed the code around to make it work but probably wont be best for slopes and stuff.
for (var i:int = 0; i<10; i++) {
if (floor.hitTestPoint(ball.x,ball.y+18,true)) {
ball.y-=gv;
vy=0;
jumped=false;
thanks

Hi, Surendra and Grant,
Thank both of you for help!
I am tring to learn Form Developer. The database and developer suites are installed in one PC. I don't think I am working in web environment.
Except the Mouse Movement Triggers, other mouse trigger work well, such as when_mouse_click, when_mouse_doubleclick.
Any help is very much appreciated.
John

Listening for mouse move from JFrame?

Hi
I'm facing a problem when I wanted to use the JFrame's method: addMouseListener( ) to listening for the mouse whether it moves from a JFrame.
In my code the JFrame containts three components:
public class NFrame extends JFrame{
JPanel contentPane = (JPanel)super.getContentPane();
contentPane.setLayout(new BorderLayout());
JMenuBar jMenubar=new jMenuBar();
JTabbedPane jTabPane=new JTabbedPane(JTabbedPane.LEFT,JTabbedPane.WRAP_TAB_LAYOUT);
JPanel bottonPane=new JPanel();
contentPane.add(jMenuBar,BorderLayout.NORTH);
contentPane.add(jTabPane,BorderLayout.CENTER);
contentPane.add(bottomPane,BorderLayout.SOUTH);
addMouseListener(new MouseAdapter() {
public void mouseExited(MouseEvent e) {
System.out.println("Mouse remove from JFrame");
Because the JTabbedPane has a default mouse Listener, thus the mouse event is caught by jTabPane and the application does not print the above message when mouse moves from jTabPane.
Could anybody give me some hints?
Thanks!

In this case there should probably not be a sleep()
at all. You might want to do that sort of thing when
you have a new thread whose job is to have
non-GUI-related functionality (like a clock ticking,
or sprites moving in a game independently). For
standard GUI interaction, the GUI thread takes care
of things and you don't need to wait at all. You're
already waiting, basically.Oh, I see! The OP is doing quite useless things!
I didn't see such f**lish things in the past!
The OP should learn the basics for GUI and event mechanism.
http://java.sun.com/docs/books/tutorial/uiswing/

Help for converting .mov HD 1080i to HD DVD 1080i format to play on my DVD player

HI,
I have downloaded HD 1080i movie clip from iTunes .
The Video Clip is a .mov file. I can play this file on my iMac , but i need to play this file on my DVD player.
My DVD PLAYER do not support the .mov file . I need some help to convert the .mov file to a DVD format.
I have tried some free application that converts any format of video to required format. But the converted DVD format is down graded to 480p.
I need the same 1080i format DVD format when it is converted.
Please suggest the Application which can convert the .mov file to DVD in 1080i
Thanks in advance
Regards,
Nilesh Labde
<Personal Information Edited by Host>

DVD Video discs are always standard definition -- 720x480 on NTSC or 720x576 on PAL, otherwise they don't conform to the strict DVD Video specification and won't play in a DVD player.
If you want HD, you have to make a Blu-Ray disc. You need specialized software for that such as Toast 11 Titanium or Adobe Encore (part of the CS5 or CS6 collection, not sold separately) and a Blu-Ray burner. Of course, you will also need a Blu-Ray player connected to your HD TV.

Need help for playing .mov file in a swing window......

Am a B.Tech final yr student and my project output is an mov file... i need to play it in a swing jFrame... Can anyone guide me for the above????

Hi.... I tried the code after changing but now am getting a new exception
- create processor for the image datasource ...
Setting the track format to: RGB, 24-bit, Masks=3:2:1, PixelStride=-1, LineStrid
e=-1, Flipped
- create DataSink for: file:/c:/1.avi
start processing...
- reading image file: C:\Program Files\Java\jdk1.6.0_12\bin\class1\1.jpg
read 1832 bytes.
# An unexpected error has been detected by Java Runtime Environment:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x044c2890, pid=2052, tid=1200
# Java VM: Java HotSpot(TM) Client VM (11.2-b01 mixed mode, sharing windows-x86)
# Problematic frame:
# C [jmjpeg.dll+0x12890]
# An error report file with more information is saved as:
# C:\Program Files\Java\jdk1.6.0_12\bin\hs_err_pid2052.log
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
# The crash happened outside the Java Virtual Machine in native code.
# See problematic frame for where to report the bug.
Whats the problem now????
Can u guide me????

Automator Help With Mouse Movement and Click

Hi all, thanks in advance for any help you can give me.
I'm trying to use Automator to go into my Volume Purchasing Program purchase history (in Chrome) and download each redemption code spreadsheet. I will need the automator script to scroll to the bottom of the page and click 'More Purchases', wait for the page to load, and repeat that many many times. (I have a lot of purchases on my account.) Then I would like to write a second script that I will run after all of the purchases are shown that will click 'Download Codes' for each line. I've done this by hand for over 2 hours now and still have a long ways to go. Figured Automator could help me out.
Any tips on how to accomplish this? I've tried recording my actions but when I play it back, it won't even switch to Chrome.

I have not found automator to be very good at doing this kind of thing.
It is theoretically possible to have applescripts imbedded in Automator that will choose from a dropdown menu, but I have also not found that to be too reliable.
I have had much better luck with Startly - QuicKeys 4 for Mac OS X

Different mouse clicks & speed up mouse movements?

Hello,
Does Adobe Captivate recognise different mouse clicks better
to say if it can record on RMB LMB and MMB clicks different
effects? For example I wish to record Software Simulation project
were on different mouse clicks (RMB, LMB, MMB) would have custom
effects like "OrangeRing" for RMB " "GreenRing" for LMB etc?
One more question plz: I found Published movie mouse
movements are very slow can I make it move more fast without
editing every slide separatelly?
Thanks
Ton

Hello Tony,
Whilst Captivate does recognize different mouse clicks (in so
much as the application will capture a right-click menu) you cannot
specify what type of mouse effect the application will use when you
capture.
What you can do is change the mouse click effect post
capture. To do this and with a just captured project open carry out
these steps:
1. Select the slide that has a mouse pointer where you would
like need to show a right-click action.
2. Choose Slide > Mouse > Properties...
3. In the Mouse Properties dialog make sure that the option
"show mouse click" is selected and then show either the color or
the custom effect you would like to use to represent the
right-click operation.
Naturally, at the very start of your movie/project you would
need to inform the learner that each time they see the one of the
effect you want them to right-click. You could also include some
audio as well which would be important if you need to adhere to
accessibility standards.
In regard to your second question, in most cases you will
find that you get the best result if you adjust the mouse timing
using the Timeline.
That said if you own a copy of Adobe Captivate 2 you can
change the mouse Display and Appear After settings globally via the
Mouse Properties dialog. Personally, for mouse movement I would not
recommend this. Anyway here are the steps to carry that out.
1. Select any slide that has a mouse pointer present.
2. Choose Slide > Mouse > Properties...
3. Click the Timing tab
4. Change the Display time and Appear After values
5. Click the Settings button
6. Choose the appropriate options from both Which properties
and which slide categories
7. Click OK.
Note : You can also show the Mouse properties dialog by left
clicking on mouse icon on any of the slides in the Filmstrip
Regards,
Mark

My macbook pro is frozen, the mouse moves, but it will not click. I have restarted and it is still the same... Can anyone help me ?

my macbook pro is frozen, the mouse moves, but it will not click. I have restarted and it is still the same... Can anyone help me ?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

When I try to enter codes for digital movie downloads it tells me "code redemption is temporarily unavailable. Try again later." Customer support has been no help. Anyone else have this problem?

When I try to enter codes for digital movie downloads it tells me "code redemption is temporarily unavailable. Try again later." Customer support has been no help. Anyone else have this problem?
Am sick of going back and forth with what has turned out to be worthless customer support. Have sent them so much info and pictures, no help. All they do is send me links for instructions on how to redeem the codes. I know how to redeem, I have redeemed at least 50 codes. To them I am obviously an idiot though. To me it seems to be a problem on their end, but can't get an answer from them on why it is telling me code redemption is unavailable. Please help! Anybody!

Confirming my suspicions with every passing hour. Support on this forum is non-existent like the support from Apple support. But, you got my money now... why would you care?

TS3048 Is there a way to "calibrate" the magic mouse? I have rearranged settings for mouse, air-cleaned, tried different surfaces, however, it seems to be misinterpreting finger movements and randomly trying to open launchpad when enabled.

Is there a way to "calibrate" the magic mouse? Batteries are good. I have rearranged settings for mouse, air-cleaned, tried different surfaces, however, it seems to be misinterpreting finger movements and randomly trying to open launchpad when enabled-flashing between the app I am in and launchpad. When right-click is enabled I have to go to the extreme upper left of mousepad to click or it is interpreted as right-click. Won't consistently "scroll". Suggestions?

Here's some things you could try....
Reset your computer's PRAM
http://docs.info.apple.com/article.html?path=Mac/10.7/en/mh26871.html
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
Mac OS X: Starting up in Safe Mode
http://support.apple.com/kb/HT1455

I want to add Narration to my movies. I've watched the Elements Guided Help for Narration. But when I click the RECORD Tab, I get an error message. "Your current audio hardware selection does not have any inout channels." My question, therefore: Do I need

I want to add Narration to my movies. I've watched the Elements Guided Help for Narration, and closely followed their procedure. But when I click the RECORD tab, I get an error message. "Your current audio hardware selection dos not have any input channels." My question, therefore: Do I need to buy an external microphone? I have an HP Pavilion Laptop, running WIndows 8.1. I thought I had a built-in microphone. But ,maybe not. Please help. Also, WHAT KIND of microphone - exactly - should I buy? Thanks for your help.
Mike Moore
Corvallis, Oregon

mikem
Go to Edit Menu/Preferences/Audio Hardware and ASIO tab and click on it.
Under the Input tab, make sure that you have your microphone selected.
Please let us know the outcome.
Thank you.
ATR

I filmed several takes of the same scene for a movie. I trimmed the best clips from each take and put them into the project screen. However, I can't figure out how to make it flow seamlessly as one scene. Can someone please help me??

I filmed several takes of the same scene for a movie. I trimmed the best clips from each take and put them into the project screen. However, I can't figure out how to make it flow seamlessly as one scene. Can someone please help me??

1-800-676-2775 apple support tech support 1 800 275 2273
If your computer is on one minute before it freezes, than you have one minute to secure your serial number.
click the apple----->click about this Mac ------> click on version----> until you see the serial number. You may have to do this a couple of times if it freezes before you have all the numbers. A camera might help.
Good Luck

HELP! Continuous Object Motion When Mouse Moves Over - ActionScript 3.

Hello! I'm working on a school project. Below is an image of what I am working on.
My cursor in this movie is the heart. When I move my mouse over Hello Kitty she jumps -- but only once. How can I get her to keep jumping when my mouse is over her, and make her stop jumping when I pull away? Here is the code below. If you can help that would be great!!!
Also, because I am new to ActionScript I might have messed up with the motion of the animation. Hello Kitty used to jump continuously without me doing anything. Then I copied the motion code into my ACTIONS layer and put stop(); in the Hello Kitty object code. So, she doesn't jump all the time anymore, just when my mouse moves over her... but she only jumps once and that is the problem. I want her to keep jumping as long as my mouse is over her. Please HELP! THANKS!!!!
import fl.motion.Animator; // I COPIED THIS MOTION FROM THE TWEEN MOTION ON THE KITTY
var kittyMotion_xml:XML = <Motion duration="15" xmlns="fl.motion.*" xmlns:geom="flash.geom.*" xmlns:filters="flash.filters.*">
<source>
<Source frameRate="24" x="8.95" y="63.9" scaleX="1" scaleY="1" rotation="0" elementType="graphic" symbolName="Tween 1">
<dimensions>
<geom:Rectangle left="-110.65" top="-135" width="221.35" height="270.05"/>
</dimensions>
<transformationPoint>
<geom:Point x="0.49988705669753786" y="0.49990742455100906"/>
</transformationPoint>
</Source>
</source>
<Keyframe index="0" tweenSnap="true" tweenSync="true">
<tweens>
<SimpleEase ease="0"/>
</tweens>
</Keyframe>
<Keyframe index="14" tweenSnap="true" tweenSync="true" firstFrame="14" y="-63.55">
<tweens>
<SimpleEase ease="0"/>
</tweens>
</Keyframe>
</Motion>;
/*var kittyMotion_animator:Animator = new Animator(kittyMotion_xml, kittyMotion);
kittyMotion_animator.play();*/
HKITTY_mc.addEventListener(MouseEvent.MOUSE_MOVE, mouseMOVE); // MOVE MOUSE TO MAKE KITTY JUMP
function mouseMOVE(event:MouseEvent):void {
HKITTY_mc.gotoAndPlay(kittyMotion_xml.currentFrame);

I won't be around much longer today, so on just a hunch I'd say if you comment out all of what you showed in your first posting, use what's below, and get rid of anything that might be stopping the kitty from jumping, it might work... though it might not...
HKITTY_mc.gotoAndStop(1);
HKITTY_mc.addEventListener(MouseEvent.ROLL_OVER, kittyJump);
function kittyJump(event:MouseEvent):void {
HKITTY_mc.play();
HKITTY_mc.addEventListener(MouseEvent.ROLL_OUT, kittyStop);
function kittyStop(event:MouseEvent):void {
HKITTY_mc.gotoAndStop(1);

When trying to make a purchase for a movie I get a security information required field then I select continue and it brings me back to original screen to purchase movie. Please help.

When trying to make a purchase for a movie I get a security information required field then I select continue and it brings me back to original screen to purchase movie. Please help.

It's telling you to verify your billing information (credit card, address, security code), which needs to be done in iTunes via computer.

Storage space for downloading movies. Please help!

I'm trying to download 3 disney movies to my ipad and upgraded my storage plan to 20GB. I currently have one movie downloaded. In the settings, It says that I have 20.4 GB available, but when I try to download a movie, it says I don't have enough available storage? Please help!!

iCloud storage has no effect on your iPad's physical storage, which cannot be increased.
You need to delete stuff of your iPad to make room for the movie.
Buying iCloud storage will not change this.

Help for Mouse movement triggers

Similar Messages

Maybe you are looking for