Help. How to configure ASA5515 as 'one armed router' for access to DHCP server on a different VLAN

Hi,
My setup
     router > ASA5515(ver8.6) > 4 SGE2010p switches
 I want to put the guest WiFi users on a separate network. I have layer 2 switches and want to configure the ASA5515 as a 'router on a stick' setup for the guest vlan to have access to the DHCP server on the native vlan.
I have
1. created a sub-interface for the inside interface and enabled intra-interface traffic.
2. A static route on the ASA point the guest network to the switch.
  What else do I need to configure on the ASA for inter-vlan routing?
ASA related config:
interface GigabitEthernet0/1
 nameif inside
 security-level 100
 ip address 10.15.xx.1 255.255.252.0 standby 10.15.xx.2
interface GigabitEthernet0/1.2
 vlan 100
 no nameif
 no security-level
 ip address 10.100.xx.1 255.255.255.0
C    10.15.xx.0 255.255.252.0 is directly connected, inside
S    10.100.xx.0 255.255.255.0 [1/0] via 10.100.xx.2, inside

Thanks for the quick response Reza.
 Actually that command is already there. Didn't include it in my post.
So I am guessing my ASA config is correct.
I am having trouble setting up the trunk ports on the layer2 SGE2010P switch for trunk port.
I am used to command line layer3 switches (CLI is wasy) but not familiar with these switches GUI. I am going through the config guide right now.
Could you help me with that too?
Not to bother you with a completely different issue though.
Thanks again!

Similar Messages

  • How i can have only one Apple ID for everything my computer and tab and iphone?

    How I can have only one Apple ID for evrything, my computer Iphone

    Thats how the majority of people use iCloud. All you need to do is sign into the same account on all of your devices.

  • How to Configure Active-Passive oracle cluster in Windows 2008 R2 64bit Server.

    How to Configure Active-Passive oracle cluster in Windows 2008 R2 64bit Server With Oracle 11g R2.
    How many database will play in this role.
    Best,

    hello
    I was going through your post and i am also doing the same thing here at our organisation for Oracle 10g R2
    Can you pls send me any docs u r having for configuration of Oracle in windows clusters .
    And, can you pls elaborate on this point
    e)Create Oracle Service with the same name in the 2nd node and copy all the files like spfile,tnsnames.ora,listener.ora,password file to Node2.
    Pls send me the details at [email protected] or you can contact me at 08054641476.
    Thanks in advance.

  • How to display more than one column with for each

    Hi guys,
    how to display more than one column with for each like below?
    for each
    Item1
    Item2
    Item3
    Item4
    Item5
    Item6
    Item7
    Item8
    Item9
    Item10
    End for each
    for each          
    Item1     Item2     Item3
    Item4     Item5     Item6
    Item7     Item8     Item9
    Item10          
    End for each

    Take a look at this to see if the solution provided would work for you: https://blogs.oracle.com/xmlpublisher/entry/multi_column_row_woes
    Won't you have more than 10 records in your data file ? If you are going to have only 10 items then you may be able to use position() function to limit it to 3 each..
    Take a look at this: https://blogs.oracle.com/xmlpublisher/entry/turning_rows_into_columns
    Thanks,
    Bipuser

  • How to configured mail Alerts in OEM 12c for WebLogic Servers up/down status?

    Hi,
    I am new in Oracle Enterprise Manager so please tell me How to configured mail Alerts in OEM 12c for WebLogic Servers up/down status?
    Thanks,
    Sagar Pawar.

    Hi Sagar Pawar ,
    First you need to set the email notification :
    Kindly review :
    12c Cloud Control: Steps to Configure Incident Rules to Send Notifications or
    Manage Events / Incidents / Problems (Doc ID 1368036.1)
    12c Cloud Control: Steps to Configure Email Notification Method (Doc ID 1368262.1)
    Regards
    Ansari

  • How to configure evaluations at level task only for released projects?

    Hi,
    Does anyone know how to configure evaluations at level task only for released projects?
    What we need is that the evaluation will be executed only when project has released status. Is that possible?
    Thanks a lot,
    CAMILO URIBE

    Hi CAMILO,
    After the notes 1422722 & 1465106 is a service method  available, which allow the customer to dis-able the evaluation.
    CL_EVE_EXTRACT_FACTORY        SET_ACTIVE
    You can put a codes in some BADI method, which is called during save. Within the Badi-Implementation, call the SET_ACTIVE method, so that the evaluation not be tiggered (until the project get released.)
    KInd regards,
    Zhenbo

  • How to configure IPS 4240 - K9 to send log file to syslog server

    I am looking for the commands in how to configure IPS 4240-k9 to send log file to SYSLOG server. If anybody has or came across similer issue please advice.
    Thanks in advanced.

    Ali -
    I am sorry to tell you, but the Cisco IPS Sensors do not send Syslog messages. Your only options for sending signature event information are:
    SDEE (an TLS Encrypted XML formatted message) the sensor is the SDEE Host and your event receiver (MARS, IME, Intelitactics, etc) is the client.
    SNMP Traps - You need to set the "Action" on each signature you want the sensor to send a trap.
    - Bob

  • Configuring Cisco Router for use with Syslog Server

    Configuring Cisco Router for use with Syslog Server:
    Does anyone know of a good doc for this?
    -Ashley

    Start with that one: http://security-planet.de/wp-content/uploads/2008/12/logging-ios.pdf
    And if you need more informations, just ask what you want to achieve.
    Don't stop after you've improved your network! Improve the world by lending money to the working poor:
    http://www.kiva.org/invitedby/karsteni

  • How can I make "No Proxy" the default for accessing the internet?

    How can I make "No Proxy" the default for accessing the internet?

    *Tools > Options > Advanced > Network : Connection > Settings
    If you do not need to use a proxy to connect to internet then try to select "No Proxy" if "Use the system proxy settings" or one of the others do not work properly.
    See "Firefox connection settings":
    *https://support.mozilla.org/kb/Firefox+cannot+load+websites+but+other+programs+can

  • How do you stop my iphone keep asking for my works proxy server name and password

    how do you stop my iphone keep asking for my works proxy server name and password

    Having been in IT for close to 30 years what they actually thought was, "whether you can connect your phone to our network isn't out problem, please go away".
    They don't want to troubleshoot it. And, honestly, if it's your personal phone, they shouldn't have to. it's not their problem unless their boss says it is.

  • How can i get pass my wrt160n router to access my server...

    how can i get pass my wrt160n router to access my server from work ??

    dmbanko wrote:
    how can i get pass my wrt160n router to access my server from work ??
    Hi
    Well u might try giving a look at this Magic Link .
    follow the instructions , you would be able to access ur server side from WAN .
    and ofcourse , let us know for any more issues.
    pe@c3
    "What u Give , is wht u better start expecting to take back".. - http://Forsakenbliss.wordpress.com

  • Need Help: How to configure/set-up custom interchange code values in B2B

    Hello All,
    Hope everybody is doing well.
    We are currently facing a problem in implementing Inbound 850 Purchase Orders in B2B from one of our Trading Partners (Customer).
    The Customer will be sending us EDI ANSI X12 ver 4010 Purchase Order files, but in the file they are sending a custom GS08 (8th element of GS Segment having Version/Release/Industry Identifier Code) value i.e. "004010RIFMAT".
    The above value is not present in the Standard Code values when we define an ECS using B2B Document Editor.
    Hence the document is failing in B2B since it is not able to identify the Trading Partner.
    If anyone has faced similar issues, I would appreciate if you could let me know on how to configure the same in B2B. Please let me know the steps in detail.
    Thanks In Advance.
    Regards,
    Dibya

    Hello Dibya,
    Can you create a new group ecs with appropriate codelist for GS08 and use it while modelling B2B flow. Make sure to undeploy and validate the agreement.
    Rgds,Ramesh.

  • Can I configure csm as one arm and routing mode at the same time?

    My csm currently is configured as the routing mode and bridge mode, resently I have a service requirement which I think the one arm mode should be the best resolution. Can anybody let me know if there will be any affect if I add the one arm mode to the currently production environment?
    Thanks in advance.
    Jason

    Gille,
    Thanks for your quick response. I notice you have same opinion about the one arm mode in your other post, but I think in the multi-tire data center design with fw in bridge mode and csm in one arm mode with RHI, do give us a lot of flexibilty. If I use policy routing instead of source nat, can I overcome these limit you metioned?
    Do you know who csm could handle the TFTP traffic? I may have too much question, I am realy looking for your suggestion.
    Thanks
    Jason

  • Accidently deleted xorg.conf, no clue on how to configure a new one

    After moving through Gnome, Cinnamon, XFCE and KDE I decided to try something new. Using compiz, tint2 and cairo-dock instead of a DE.
    It worked, to a sense. Resolution was not correct and my two monitors were clones of each other and not individual screens which I obviously prefer. I can't remember configuring the xorg.conf earlier, so I assumed that it auto-generated and found the information itself, so I deleted it and hoped it'd generate by itself with the correct settings. Stupid move by me, as nothing works now. When my computer starts, I'm thrown into tty1 obviously. I can log in and execute commands from there, but the moment I execute the command startx, nothing works. The X server starts up fine and I can see things on the screen (same resolution as before) but I can't type anything, nor move my mouse. This ends up in me having to restart since I can't key combo into another tty to kill the X server either. I've checked the wiki regarding the xorg.conf and how to configure it, but I'm really at loss. My head is grinding just reading it, I don't really understand how to proceed.

    Configuring and maintaining the X server is most likely my weakest link when it comes to linux, haha
    cfr wrote:
    raghap wrote:To be honest, I've no clue how all those video drivers got there, haha. I'm sure I only installed mesa, vesa and the open source ATI drivers! Anyway, reinstalling xorg-server fixed the issue with my keyboard and mouse. Not sure if this is the right place to ask considering the original issue have been solved, but how do I get my dual monitor setup to work correctly? I know that the wiki page says how, but it sort of confuses me. Am I supposed to write that down twice?
    Are you supposed to write what down twice?
    Please don't expect somebody to step you through this. The wiki tells you what you need. Of course, if something is confusing, please ask. Tell us what is confusing and why, but you need to start by trying to understand it and letting us know where you get lost. Apart from anything else, this may enable somebody to edit the wiki to make it less confusing for future readers. (That person might even be you.)
    In any case, I have no idea what 'that' refers to.
    Sorry for being unclear, I was referring to this part of the wiki page.
    https://wiki.archlinux.org/index.php/At … _X_screens
    Edit
    Thanks a bunch for the help guys! Finally got the resolution straight and my monitors to behave correctly, thanks to what you wrote Skottish. Really need to get a better understanding of how Xorg works, haha.
    Last edited by raghap (2013-10-26 20:16:23)

  • Please help : How to configure a datasource in 9iAS

    Hello all,
    I am new at 9iAS . Can anyone tell me how we configure datasource with JNDI name in 9iAS.
    any help will be appriciated.
    Thanks a lot
    Madhukar
    null

    Do you mean from flash in a web page or do you mean
    converting the swf file format (maybe with a decompiler or
    whatever).
    If you're meaning to do it from flash in a web page:
    You can't save a movieclip from flash to svg. You could
    perhaps record drawingAPI commands and create the appropriate svg
    output in an internal xml object which you then send to the server.
    But I don't know of any pre-built classes to do that (disclaimer:
    because I don't know of any doesn't mean they don't exist).
    Going from svg to flash is doing it the other way around.
    Converting the svg paths back to actionscript drawing commands. I
    think I've seen some examples of this online somewhere.

Maybe you are looking for