Help! I figured out the problem - sort of.

So I posted my problem two days ago. I found that only some of my pages were loading in Firefox 3. I didn't know why (see below for original posting).
With a little experimenting, I have found that republishing the pages that "work" actually causes them to no longer work. I'm pretty sure I published these pages that worked with previous versions of iWeb. Now that I'm using the latest version of iWeb, any new pages (blogs) cannot be viewed by Firefox 3.
Is there anyone out there with a work around? Solution? Anyone?
HERE IS THE ORIGINAL POST:
HELP- Take a look at my pages- What's wrong?
Posted: Nov 19, 2008 3:19 PM
Reply Email
Here are links to my pages: the first link doesn't load in Firefox 3. The second link loads fine. I can't figure out the difference between the two pages. Any web gurus out there that can determine my problem? I really want people using firefox to be able to view my site.
THANKS!!
LINK 1:
http://web.me.com/reeldamian/DAMIANDP.COMNYO/COMMERCIAL_REEL/COMMERCIALREEL.html
LINK 2:
http://web.me.com/reeldamian/DAMIANDP.COM_NYO/FX/FX.html
Message was edited by: 3pointer

I installed oracle apps 11.5.10.2 using steps given in thread and I didnt have any problems. I then installed it on my friends laptop and it worked fine. but recenly it stopped working in my laptop, i was not able to open login page from main url (http://www.msb.ora:8000) it gave error : page cannot be found
So i reinstalled it on fresh system again.. but since then it not working. I have tried atleast 9-10 times and everytime it ends up with same error "jsp is not responding", I am able to open the rapid install main page but I am not able to open login page. it says page cannot be found. i followed all the steps suggested by you guys in this thread to solve this error, but still have no luck.
I have tried following steps to solve the issue
1) As its recommended to installed apps on fressh os without jdk i did the same, as i didnt worked i tried installation with jdk preinstalled,
2) i have tried on both windows server 2003 and win xp professional
3) I tried to change the jdk path in jser.properties file
I will really appriciate any help to solve this problem. Below is system details:
os: windows server 2003
ram : 1gb
processor: 1.83ghz core 2 duo
Oracle apps 11.5.10.2
java version: 1.4.2_04 ( installed by rapidwiz)

Similar Messages

  • HT204053 Help me figure out the restrictions passcode

    Help me figure out the restrictions passcode i need to get on to restrictions

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
    1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. iOS- Understanding passcodes
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. How to Recover Forgotten iPhone Restrictions Passcode | The iPhone and iPad
    6. Restoring iPod touch after forgotten passcode
    7. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    Restrictions Passcode Help
    1. How to Recover Forgotten iPhone, iPad Restrictions Passcode

  • I Ipod class wont play TED and other video podcasts.  The genious bar could not figure out the problem.  This problem is not isolated to a single computer.  Secondly, the convert to ipod version feature in Itunes does not resolve the problem.

    My Ipod classic wont play TED, The Grid, Techzilla and other video podcasts (but not all video podcasts).  The genious bar could not figure out the problem. Instead, the Apple store gave me credit towards a new classic, which produced the same problem.  This problem is not isolated to a single computer.  Secondly, the convert to ipod version feature in Itunes does not resolve the problem.  Lastly, I tried restoring the ipod to no avail.  I've heard this is a video codec problem. 

    See this extensive older thread on the issue.
    https://discussions.apple.com/thread/2813428?start=45&tstart=0
    B-rock

  • I upgraded to the new version "4" and it will not load any websites..."unable to locate server" is all i get and cannot figure out the problem ....had to delete and go back to an earlier version whichi understand is unsafe...what to do?

    # Question
    I upgraded to the new version "4" and it will not load any websites..."unable to locate server" is all i get and cannot figure out the problem ....had to delete and go back to an earlier version which i understand is unsafe...what to do?

    That was probably caused by your Firewall blocking the newly installed version of Firefox.
    No known security issues with Firefox 3.6.17, which was just released this past week.

  • Help me to figure out the problem please

    Hello there guys,
    i have gtx 560 ti twin frozr II OC and 2 weeks ago i noticed some strange freezing under any settings(low/ultra) for bf3 or dirt3 or some other applications and games. the strange thing that i dont have them(freezes) running 3dmark and the card dont overheat at all(31 in idle max 73 at full after 15mins of furmark)...i post an example of the issue in hope to make you undestand the problem that the card has.... you can clearly see at the end of the video...sorry i didnt register it in fraps to avoid further fps drop.
    my specs are
    asus m5a99x evo amd3+
    8gb dd3 kingston 1666
    psu 550gx coolermaster
    cpu phenom x4 955 3.2
    im pretty sure its gpu cuz i changed the mainboard last week and the problem persists...
    thx

    Quote from: jwolf on 07-March-12, 15:23:23
    yeah i mean rma!
    gpu is 99% load..using 23inches monitor...this crap happens on any resolution and setting(the recorded one is on 1920x1080)on lower resolution its less noticeble but its there..and the cpu is about 70% load..
    You probably haven't done any overclocking to the CPU have you? Try to go into your BIOS and disable the energy saving options. I believe it is called Quiet and Cool look for that option and disable it and report back!
    edit: Bf3 on the other hand from the improvements of disabling Cool and Quiet or Quiet and Cool whatever AMD calls it is all you are going to get that game is a bit more taxing on the CPU and unless you don't overclock you won't get any better performance out of it. To be sure check your cpu and gpu usage in that one as well.

  • I think I figured out the problem uploading iMovies to YouTube.

    When using an iPhone, iPod, or iPad to record video, YouTube basically treats it like any mobile to social networking post--you hit share, choose YouTube, and that's it whether you're loading from the Camera Roll or iMovie.  But if you shoot with something other than a mobile device's camera and have difficulty uploading to YouTube it seems the problem isn't Apple, but rather a simple change you need to make to your YouTube account.
    Simply: Add a Channel  That's it, the whole solution.
    Now the only thing you need to be aware of is, despite the fact that your Apple device with Retina display can play video in greater than 1080p, YouTube doesn't recognize any mobile device's ability to do this.  So if you upload a video in 1080p, it will only be viewable via YouTube on a desktop computer.  720p however is just fine.
    So if you shot your video in 1080p, but you want it to be viewable on mobile devices using YouTube, go into iMovie and upload the video in 720p.
    That's it.  Please feel free to shoot down my theory and make your own suggestions.

    Hi,
    I am trying to display an RSS feed on my website as well. I
    haven't figured it out.
    Can you help?
    Thanks,
    H.J.D.
    [email protected]

  • Please help me figure out the reason for this error

    Hello I am trying to run the jar Gui file I got from http://www.cs.cmu.edu/~cmucam/cmucam2/downloads.html
    and am getting the following error:
    Exception in thread "main" java.lang.UnsatisfiedLinkError: no sserial in java.li
    brary.path
    at java.lang.ClassLoader.loadLibrary(Unknown Source)
    at java.lang.Runtime.loadLibrary0(Unknown Source)
    at java.lang.System.loadLibrary(Unknown Source)
    at serialPort.<clinit>(serialPort.java:22)
    at SerialComm.<init>(SerialComm.java:50)
    at CameraSerial.<init>(CameraSerial.java:64)
    at MainWindow.<init>(MainWindow.java:620)
    at CMUcam2GUI.main(CMUcam2GUI.java:7)
    Can anyone figure out why I am getting this error? I am running it on a windows xp professional system.

    Yes you need the sserial native library (and no I do not know where to get it).

  • Thimble won't show any details on my "broken" code - I can't figure out the problem.

    I am trying to add a line for the background image. I followed the thimble example and have tried numerous links, all resulting in a red exclamation mark. I'm not sure what the problem is and nothing happens when I click the exclamation mark.
    I also can't save any of my progress because of the error.

    Thanks for trying to help guys!
    I'm totally new at this so as far as I'm aware, I can't actually get a link because it won't save my progress because of the error? So unless its something else causing the error that won't let me save?

  • Syntax error in my code and I can't figure out the problem

    When I try to compile a program, I get this message:
    Syntax error on token "(", "Identifier" expected
    This is the part of the code that is giving me trouble:
    JTextPane textPane = createTextPane();
              JScrollPane paneScrollPane = new JScrollPane(textPane);
              paneScrollPane.setVerticalScrollBarPolicy(
                                  JScrollPane.VERTICAL_SCROLLBAR_ALWAYS);
              paneScrollPane.setPreferredSize(new Dimension(250, 155));
              paneScrollPane.setMinimumSize(new Dimension(10, 10));Can you see what's wrong?
    Thanks

    The code's syntax is perfectly fine. The compiler is not falgging an error message in this part of your code. One silly thing you can do:
    Try out this silly change...I don't think it will make any difference but still.
    paneScrollPane.setVerticalScrollBarPolicy(JScrollPane.VERTICAL_SCROLLBAR_ALWAYS);That is, put it all in a single line.
    If it is already in a single line then you can be sure that the problem is being flagged from elsewhere in your code and this portion.
    Vijay :-)

  • Website blocked - We cannot figure out the problem - Killing our business

    Please help. We had to post here because we are not getting any help anywhere. Someone please help us.
    We were selling ad inventory to OpenX ad exchange. One of their advertisers was distributing malicious code. We caught the issue and disabled them as an ad network and the malicious ad stopped appearing. Then a couple of days later, Google/Stopbadware.org had us blocked. We followed every single procedure to report we have removed the threat. Every single day for almost a week now, we file a report, it gets denied and no one (we have even posted on the stopbadware.org) can tell us what the problem is and we have scanned our site as well and cannot find any threat. Yet, Google still will not unflag our site. You can see the latest Diagnostic report below which itself shows there has never been any detection and only 1 complaint in the past.
    This is killing our business because a majority of our users use the firefox browser.
    We have tried to contact Google directly, they basically told us to go to hell and use email.
    We are a very small company and don't know what to do and could really, really use help our business is really dying.
    Any advice, suggestion, anything would be greatly, greatly appreciated.
    Please send message to: [email protected].
    Safe Browsing
    Diagnostic page for blackbook2.com
    What is the current listing status for blackbook2.com?
    Site is listed as suspicious - visiting this web site may harm your computer.
    Part of this site was listed for suspicious activity 1 time(s) over the past 90 days.
    What happened when Google visited this site?
    Of the 8 pages we tested on the site over the past 90 days, 0 page(s) resulted in malicious software being downloaded and installed without user consent. The last time Google visited this site was on 2010-10-24, and suspicious content was never found on this site within the past 90 days.
    This site was hosted on 1 network(s) including AS36670 (1VAULT).
    Has this site acted as an intermediary resulting in further distribution of malware?
    Over the past 90 days, blackbook2.com appeared to function as an intermediary for the infection of 105 site(s) including desishock.com/, divxturka.net/, esoft.in/.
    Has this site hosted malware?
    No, this site has not hosted malicious software over the past 90 days.
    How did this happen?
    In some cases, third parties can add malicious code to legitimate sites, which would cause us to show the warning message.
    Next steps:
    * Return to the previous page.
    * If you are the owner of this web site, you can request a review of your site using Google Webmaster Tools. More information about the review process is available in Google's Webmaster Help Center.

    We have done this already each day.
    Below is a full outline of the steps we have done.
    1. Our site was reported as a possible attack site. We believe this
    was due to the OpenX Ad Exchange network circulating several ads
    through its network and partners that contained malicious code. We
    detected these malicious ads. We identified the issue and removed
    them from our site immediately upon detection. Shortly after our
    removal, our site, "blackbook2.com" was included in the Google
    blacklist for attack sites and distributed to Google partners as well
    as directly affecting visitors that use the Mozilla browser.
    2. We have followed instructions to have our site removed from your
    malware list as specified in your Google Webmaster tools both on
    10/20/2010, 10/21/2010, 10/22/2010, 10/23/2010, 10/24/2010.
    3. We requested review on your partner StopBadware.org of our site as
    well on 10/20/2010 as well as requested help from the StopBadware.org
    community, of which, no one can point to a specific instance where we
    are causing any problem.
    4. Webmaster tools indicated that there was only 1 report and that
    Google itself has not detected any malware each time it has attempted
    to scan our site to confirm infection.
    5. We have scanned and manually checked for any changes in files, new
    files, redirections, etc.
    6. We have checked Google Webmaster tools for any possible links to
    files we may have missed that may be causing issues, none were found,
    we checked EVERY SINGLE LINK.

  • Can someone help me figure out this problem in my program?

    i cant get it to determine a winner, can someone help me? heres the program
    import java.awt.*;
    import java.awt.event.*;
    import javax.swing.*;
    public class TicTacToe implements ActionListener {
         private JFrame window = new JFrame("Tic-Tac-Toe");
         private JPanel inputPanel = new JPanel();
         private JPanel boardPanel = new JPanel();
         private JButton button3 = new JButton("3 by 3");
         private JButton button4 = new JButton("4 by 4");
         private JButton button5 = new JButton("5 by 5");
         private JLabel label = new JLabel ("Click a button to choose game board size:");
         private JButton buttons[][];
         private int boardSize=0;
         private int count = -1;
         private String letter = "";
         private boolean win = false;
         public TicTacToe(){
         window.setSize(500,500);
         window.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
         inputPanel.add(label);
         inputPanel.add(button3);
         inputPanel.add(button4);
         inputPanel.add(button5);
         button3.addActionListener(this);
         button4.addActionListener(this);
         button5.addActionListener(this);
         inputPanel.setSize(500,200);
         window.add(inputPanel,"North");
         //Make The Window Visible
         window.setVisible(true);
         public void actionPerformed(ActionEvent a) {
              if(count==-1){
                   letter="-";
                   count=0;
              else{
              count++;
              if(count % 2 == 0){
                   letter = "O";
              } else {
                   letter = "X";
              if (a.getSource() == button3) {
                   boardSize=3;
              else if (a.getSource()== button4){
                   boardSize=4;
              else if (a.getSource() == button5){
                   boardSize=5;
              if ((a.getSource() == button3)||(a.getSource()==button4)||(a.getSource()==button5)){
                   button3.setEnabled(false);
                   button4.setEnabled(false);
                   button5.setEnabled(false);
                   buttons = new JButton[boardSize][boardSize];
                   for(int i=0; i<boardSize; i++)
                        for (int j=0; j<boardSize; j++){
                             buttons[i][j] = new JButton();
                             boardPanel.add(buttons[i][j]);
                             buttons[i][j].addActionListener(this);
                   boardPanel.setSize(300,300);
                   boardPanel.setLayout(new GridLayout(boardSize,boardSize));
                   window.add(boardPanel,"Center");
              JButton pressedButton = (JButton)a.getSource();
              pressedButton.setText(letter);
              pressedButton.setEnabled(false);
              if(win == true){
                   JOptionPane.showMessageDialog(null, letter + " wins the game!");
                   System.exit(0);
              } else if(count == (boardSize*boardSize) && win == false){
                   JOptionPane.showMessageDialog(null, "The game was tie!");
                   System.exit(0);
         }

    You never even do anything that tries to set "win" to true. So you haven't even tried determining a winner. We aren't here to do your work for you.

  • Somebody help me figure out this problem before I lose it =(

    Ok, Ive had no problems with iTunes up until now, when I borrowed a friend's Green Day CD, and I burned the 13 songs on it onto my computer (but not through iTunes). I can listen to them perfectly fine on WMP and other ones, but I cant on iTunes, and I cant put them into my library. The format that they have is .mp3, but they just wont seem to go into the library. In fact, theyre the ONLY songs that I cant put into my library. Theyre not protected (at least, I dont think they are), so I cant see what the problem is.
    Could somebody tell me whats going wrong with it?
      Windows XP  

    Ok, Ive had no problems with iTunes up until now,
    when I borrowed a friend's Green Day CD, and I burned
    the 13 songs on it onto my computer (but not through
    iTunes). I can listen to them perfectly fine on WMP
    and other ones, but I cant on iTunes, and I cant put
    them into my library. The format that they have is
    .mp3, but they just wont seem to go into the library.
    In fact, theyre the ONLY songs that I cant put into
    my library. Theyre not protected (at least, I dont
    think they are), so I cant see what the problem is.
    Could somebody tell me whats going wrong with
    it?
      Windows XP
    Hi..
    if you make a cd yourself of the tracks using WMP or another media player, then use iTunes to import the tracks from the cd you just burned, that should work. otherwise, you'll have to borrow the cd again and use iTunes to import it into your iTunes library. hope that helps

  • Can anyone help me figure out a problem (if you have the time?)

    help

    ..any joy finding an answer? I am stumped, too. Every day I convert Pages Docs to Word and PDF to forward to clients .. and all of the sudden last night Pages wouldn't let me convert. it was late -- I was frustrated, so I thought it was just me. Shoot me an answer if you found one. Tried rebooting, and no joy.
    Thanks
    T

  • Iphone 5 battery drain issue, a question to all tech gurus.A challenge to those who can figure out the problem!

    Hi guys!
    I bought an iPhone 5 approximately 18 months back (warranty over) and have been running into battery problems for the past 1 month
    my phone drains about 10% per hour while on sleep mode (no usage at all other than picking up calls) ,hence it can normally last up to 8-10 hours on sleep mode alone.However,when the phone is being used,it can usually only last up to 1-2 hours.It usually feels slightly warm on touch on sleep mode but becomes a little hotter when using at prolonged periods,otherwise it works quite well externally.This in my opinion is not normal since I've been using this phone for the past year and i can kind of guess the normal battery lifespan of my phone.My current iPhone 5 version is 7.1.1 and is not jailbroken.
    I have had my phone changed into a new one just last year due to the faulty sleep/wake function,FYI
    Before you say anything,i would like to let you know that i come from Malaysia whereby there are no genius bars here and most are 3rd party support groups who are more or less not bothered to fix or diagnose my phone problem and are more likely to change my phone into a new refurbished phone instead (cost approximately 300USD),they are not even willing to touch my phone.Trust,me I've been to more than one official stores.
    Hence I've devised a few ways of diagnosing the phone problem myself based on online tips and tutorials
    1)Factory reset : ive backed up and restored the phone (factory reset) with a new account just to test if it is the fault of the software.This process was done about 6 times in total but with no progress
    2)Ive tried every single software tweak suggested from the net - switch off data/off wifi/airplane mode/off icloud/off background refresh/resetting the phone etc..You name it,I've done it!
    3)Ive also checked for evidence of decay from the current iPhone,which shows a design capacity of 1430 and full charge capacity of 1352,which is pretty good if ud asked me.
    4)As for the usage and standby values,it is not equal.on full recharge it says stand by at more than 20-24 hours and usage time of 8 hours.However,in reality this values are never really achieved.
    5)Every single app has been deleted FYI,there are only stock apps in my phone.
    6)Finally i gave in and had given my phone to someone experienced to manually change my internal battery into a new one ( i was observing him and I'm quite sure that he hadn't damaged anything while fixing it ).But this does not improve the battery power one bit.
    This leads me to believe that this might be a hardware issue other than the battery itself,i was wondering if anyone has ever encountered a case such as this one since i am truly unable to find a cause on why the battery is drained in this manner,I'm suspecting that my sleep button might be activated,but my phone is unable to sleep internally due to some unknown reason.
    Any help would be greatly appreciated!
    Thanks so much!

    Try this blog.  There is some good information provided by a former Apple employee.
    http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain

  • Help me find out the problem of this kernal panic

    I was unmounting a FTP account via finder and I was useing macfuse to access it.
    panic(cpu 0 caller 0x2E1D64AC): MacFUSE: vnode reclaimed with valid fufh (type=0, vtype=1)
    Latest stack backtrace for cpu 0:
    Backtrace:
    0x000952D8 0x000957F0 0x00026898 0x2E1D64AC 0x000FDBA4 0x000E6048 0x000E6358 0x000E87B4
    0x000E5D60 0x000EC2D0 0x000EC100 0x002AB7F8 0x000ABB30 0x9004B5FC
    Kernel loadable modules in backtrace (with dependencies):
    com.google.filesystems.fusefs(0.2.5)@0x2e1ce000
    Proceeding back via exception chain:
    Exception state (sv=0x2DB28000)
    PC=0x900647CC; MSR=0x0000D030; DAR=0xA000C56C; DSISR=0x40000000; LR=0x00002D94; R1=0xBFFFF910; XCP=0x00000030 (0xC00 - System call)
    Kernel version:
    Darwin Kernel Version 8.9.0: Thu Feb 22 20:54:07 PST 2007; root:xnu-792.17.14~1/RELEASE_PPCModel: PowerMac4,4, BootROM 4.6.4f1, 1 processors, PowerPC G4 (3.3), 1 GHz, 1 GB
    Graphics: ATI Radeon 7500, ATY,RV200, AGP, 32 MB
    Memory Module: DIMM0/J1600, 512 MB, SDRAM, PC133U-333
    Memory Module: DIMM1/J1601, 512 MB, SDRAM, PC133U-344
    AirPort: AirPort Extreme, 405.1 (3.90.34.0.p18)
    Modem: MicroDash, UCJ, V.92, 1.0F, APPLE VERSION 2.6.6
    Network Service: AirPort, AirPort, en1
    Parallel ATA Device: Maxtor 2F040L0, 38.29 GB
    Parallel ATA Device: TOSHIBA ODD-DVD SD-R1412
    USB Device: USB Trackball, Logitech, Up to 1.5 Mb/sec, 500 mA
    USB Device: Hub, Up to 12 Mb/sec, 500 mA
    USB Device: USB Hub, Lexmark, Up to 12 Mb/sec, 500 mA
    USB Device: Lexmark X1100 Series, Lexmark, Up to 12 Mb/sec, 500 mA
    USB Device: X1100 Series, Lexmark, Up to 12 Mb/sec, 500 mA
    USB Device: Natural® Ergonomic Keyboard 4000, Microsoft, Up to 1.5 Mb/sec, 500 mA
    FireWire Device: OXFORD IDE Device, Oxford Semiconductor Ltd., Up to 400 Mb/sec
    FireWire Device: > LaCie d2 DVD-RW Firewire, LaCie Group SA, Up to 400 Mb/sec

    KPs are usually caused by hardware problems. When trying to troubleshoot problems, disconnect all external devices except your monitor, kbd & mouse. Do you experience the same problems?
    May be a solution on one of these links.
    Troubleshooting
    The X Lab (Troubleshooting & Maintenance of OS X)
    OS X Routine Maintenance & Generic Troubleshooting
    Prevent Mac Disasters
    Kernel Panic
    Mac OS X Kernel Panic FAQ
    Mac OS X Kernel Panic FAQ
    Resolving Kernel Panics
    12-Step Program to Isolate Freezes and/or Kernel Panics
     Cheers, Tom

Maybe you are looking for