Help implementing scenario

Hi again,
I need help implementing the next scenario (simplified):
- One material can have N discounts.
- On ODS A I have 'Material' and 'Customer' as characteristics and 'Amount of the sell' as ratio.
- On ODS B I have 'Material' and 'Discount Type' as characteristics and 'Amount of discount' as ratio.
I'm using a MultiProvider for the queries that needs the detail of the discounts.
How can I create a query that shows the Amount of sell for materials that have discount of type '3' ?
If i use a filter for discount type '3' I won't get any amount of sell.
thanks in advance

Hi Juan,
you can use a prequery for your problem. That means, you use a Query to fill a variable.
Build a Query A with material in the rows and a filter with 'Discount Type' = '3'.
Then define a variable for material with the option for 'processing by' = 'Replacement path'. fill out the other fields and press next. Here select for Query the before defined Query A. now next and finish.
The last step is to define the query with material and Amount of sells. In this query use the defined variable for material.
That's it.
Hope the english is understandable.
regards
Alex

Similar Messages

Implementation scenarios relating to SD

Hi ,
Can some one pl let me know the implementation scenarios relating to SD module..
I am new to SD field...Could u please suggest me some important areas i should concentrate ..
Thanks in anticipation.
Regards
Atahar

Link: http://help.sap.com/bp_blv1500/BL_India/index.htm
Preconfigured Scenario's for: Sales
Here as you select the scenario & further go into it, you will ger the Business Process as well as configuration guide. These are very helpful & knowledgable information.
Regards,
Rajesh Banka
Reward points if helpful.

Need two implementation scenarios

Hi,
I am very new to this forum..have one requirement.
Need two implementation scenarios depends on the document type..
when i create shopping cart with one document type it needs to trigger one and others for another scenario..
Would it be possible to do
kuber

Hi,
You can use BADI (BBP_EXTLOCALPO_BADI )
a) make use ECS, if Classic scenario configuration exist
b) or activatated Extended Classic Scenario , need to make Classic scenario.
Hope it will work for you.
Thanks,
Rahul Mandale

Help on scenario in Real estate/Construction industry with PS,SD,MM modules

Dear Gurus,
Iam into implementation of a Real estate/Construction company (FI/CO,SDMM<PS modules). But we are NOT using SAP RE-FX or Homebuilding solutions (HBS).
My Client's business scenario goes like this.
There are two broad divisions:
Residential properties:
They are going to build 840 flats (divided into 14 blocks with 15 floors in each block) with amenities like club house, parking facilities etc. The flats will be sold to customers.
Commercial Properties:
Commercial building is divided into 60000sqft for hotel construction and 40000 sqft for retail space which includes 2 small theatres.
The commercial complex will be retained by the client.
Three types of residential properties will be built
1. 4 blocks of 2 bedroom flats
2. 5 blocks of 3 bedroom flats with 2 toilets attached which will be termed as 2+1.
3. 5 blocks of 3 bedroom flats.
When the customer is enquiring about the FLATS, i have to check the availability of the same.How to do this?
Iam considering the flats as FINISHED GOODS, So How do I get those into the stock without doing intial entry using 561?( no PP module here)Is is possible to relate the stock through PS module?
Please give your valuable ideas on this.
Regards,
Anbu

Hi
From the requirement and design planned, your each flat will be different material. If this is so then whatever material is blocked or not for sale or closed or open you can define te material sales status accordingly. hence if the status is other than released then they will give error and that information will be useful.
If u have lot of flats which are look alike and hence any allocation of flat to any customer is ok then product allocation cab work.
Product allocation can work good when the material has characteritics of interchangeablitily and standardization.
No flat can be same. Eventhough u have same sq ft area same the location according to vastu and east west direction etc criteria will be unique and hence using product allocation wil result into any one flat being allocated to customer which is not desirable.
hence according to me you can have materials with different status and that will suit ur purpose.
Reward if helpful
Kind Regards
Sandeep

CUA Implemention scenario...

Hello All,
We are about to implement a CUA in landscape..
There are two scenarios that are currently in focuss..
Scenario 1: To have DEVELOPMENT CLIENT act as CUA for clients of all systems in the landscape.
Scenario 2: To have DEV CLIENT as CUA for clients of all Developement systems , QA client as CUA for clients of all QA systems and PRD CLIENT as CUA for clients of all Production systems .
Please let me know the pros/cons of having either of scenarios for the landscape.
Regards,
Ajit

Hi,
As per my knowledge, CUA will simplify the Security admin's job.
in your case, if you have many SAP system landscapes - more production systems...and large number of users... then set a seperate CUA client for PRD systems. or if there are different bussiness entities, then go for different CUA clients respectively.
if you setup a CUA client for each environment, means you are minimising the clients you access each time. but the work time/load will not impact as expected benefit from CUA. if you setup single CUA client, the security admin job will be done in a single shot.
otherwise;
->if you have Solution manager, setup CUA client there and integrate with other systems like ECC and BI.
it will help at the time of license audits and earlywatch checks also.
->if you are not using Solution manager then you can use Quality client or Dev client for all your landscapes.
Note; At the time of new user creation, the CUA system will not create the usermasters in all systems by default. Based on our systems selection, it will create the user masters in respective systems. (Majority users will have only production access).
To understand the more CUA benifits refer to; CUA Project Propsal Questions
You can see the CUA Integration doc; http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/8302a929-0501-0010-05b5-d48f544bc572&overridelayout=true
Hope that helps
Cheers
Praveen.

Service procurement & implementation scenario in SRM 7.0

Hi Guys,
I would like to know if in SRM 7.0 the new Service Procurement External Staffing scenario would work in the Extended classic scenario implementation? Or is this only supported in standalone?
Do we have to custom build the document exchange between ECC - SRM - SUS for confirmation and invoice documents like in SRM 5.0. I am searching for a possibilty to let the service agents themselfs fill in the confirmation with the service entry sheet.
If the extended classic scenario is supported then we are quickly done. Other possibility is to let an existing web application (to capture time sheets) generate a XML confirmation message and send this message to EBP via XI. This way the hours can also be captured. Invoicing can then by handled e.g. by ERS. What do you think?
Thx.
Skander

Hi Muthu,
Thx for your response, but these blogs do not provide an anwser to my question. I have read the release documentation of SRM 7.0, but even then I still have the above question.
Will this business scenario work in combination witht the extended classsic scenario (and how does SUS fits in this picture)?
Kind Regards,
Skander
Edited by: Skander Essaim on Jul 7, 2009 2:12 AM

Oracle RAC implementation scenario

Hello DB Experts,
I have got a very specific business scenario to be implemented.
Basically we need to implement 2 Node RAC infrastructure.
But in this on each node we have 2 oracle instances running.
Now is it possible to have one Instance running on Active / Active mode and another instance in Active / Passive mode.
First of all i want to know it is possible to implement RAC in this manner.
If yes, then for Active / Passive instance if Active instance goes down how to switch the traffic to the passive node? Or basically i want to know how do i make that passive node active?
Would really appreciate some quick response.
Thanks,
Darshan

Lets assume some better names for this discussion...
RAC Database MYDB (instance on node1 = MYDB1, instance on node2=MYDB2)
SI Database URDB (instance on node1 = URDB with active/passive on node2)
Can this be done? Yes. But why? You can use SERVICES to limit on which node your application is accessing.

Conversion Agent - Help for scenario.

Hi Experts,
We are working on Conversion Agent for EDI - XI - IDOC, creating Parser in Conversion Agent, when we are using the same in Communication Channel, the file is not picked up from EDI Folder.
It is giving us one error "Error: java.lang.NullPointerException".
May be we are not creating the complete scenario and making some mistake in the scenario.
We have read many blogs and threads on SDN, but it is not making any help in our condition.
If anybody have complete scenario with screen shot, please give us that as it is urgent.
Please help,
Regards,
Study SAP

Hi Lawrence,
Thanks for your reply,
There is only one project and at CMD when we are trying to run it is running fine,
in the result is creating XML Message.
we have these errors in our Communication Channel Monitoring :
Transformation failed; CMException: Failure while trying to create engine log C:/Documents and Settings/Administrator/Application Data/SAP/ConversionAgent/CMReports/Init/Events.cme- for more information see file://internal
Attempt to process file failed with com.itemfield.contentmaster.CMException
Is the problem related to our project or with our deployment ?
Please help,
Regards,
Study SAP

Need help on Scenario based questions and answers...

Hi,
I have worked a bit on SSIS. I am preparing for SSIS interviews. I have faced some. Mostly they ask for scenario based questions. If anyone can provide some scenario based questions, it will be great help.
Thanks in advance.
Anujit Karmakar Sr. Software Engineer

Hi Anujit,
If you want to do something preparing for SSIS interviews, it's important to get some sense of SQL Server Integration Services. "Professional Microsoft SQL Server 2008 Integration Services" is a great book and tutorial for learning SSIS. It
includes plenty of examples, code snippets and few case studies as well.
Besides, just as Vaibhav said, please go through all the problems people mention in this forum, this will pretty much give you ideas about real time Scenarios Questions and Answers.
The following links might be helpful for your interview:
http://www.sqlserverquest.com/p/ssis-interview-questions.html
http://biexpertsworld.blogspot.in/2013/02/faq-ssis-interview-questions.html
https://www.katieandemil.com/ssis-interview-questions-and-answers-pdf-download?tab=article
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Plz help the scenario..i am a new bee to obiee

i have a scenario i have a dashboard which contains 2 objects
1)dashboard prompt( which contains year values )
2) report (year and sales as columns)
what my question is when i select a year in prompt how i want the result is i want CURRENT YEAR DATA AND PREVIOUS YEAR data..
For this i create a presentaion variable and capture the value in dashboard prompt....where i struck is how to write the logic ...any help please

Try in this
For Current Year
SELECT saw_0 FROM ((SELECT Year(CURRENT_DATE) saw_0 FROM "SampleSales")
For Previous Year
(SELECT Year(CURRENT_DATE)-1 saw_0 FROM "SampleSales")) t1 ORDER BY saw_0
If you want get the current year and previous year in prompts you can create a variable and insert this logic
SELECT saw_0 FROM ((SELECT Year(CURRENT_DATE) saw_0 FROM "SampleSales") UNION (SELECT Year(CURRENT_DATE)-1 saw_0 FROM "SampleSales")) t1 ORDER BY saw_0
Mark if helps.
Thanks,

Help implementing QoS for Video Streaming

Hello friends!
I am trying to implement a quality of service logic for a videoplayer based on the Brightcove API. As I have learned it's a better idea to use methods in NetStreamInfo class (eg. currentBytesPerSecond) rather than using a native bandwith check.
E.g. (where nc is a NetConnection object)
var ns:NetStream = new NetStream(nc);
var nsi:NetStreamInfo = ns.info;
var cbytes:Number = nsi.currentBytesPerSecond;
use cbytes to evaluate which quality to chose...
The problem is that streams are initiated (by videoplayer) using the Brightcove API and not directly using NetConnection.connect(). The BC API doesnt seem to give me any access to the classes listed above either, altough I'm certain it's utilizing them.
Are there any Brightcove or video streaming experts out there that have a clue as to how I can access the NetConnection object used by Brightcove? Or if i can access the NetStream object or even tge NetStreamInfo object directly.
best regards,
Fredrik

You don't have your egress queuing setup. You need to map your COS values to a queue, then you can allocate bandwidth to those queue's. This makes lower priority traffic wait while higher priority traffic gets transmitted.
I have a few configuration examples on my site that may help you. Remember that the config that I have may not be the best for your network so you will have to figure that out yourself.
http://goatnetworking.com/CiscoCSwitchQOSConfig.php
Make sure that your QOS profile on the WLC is set correctly. I found one of my controllers didn't even have a value set in the profile, but the profile was applied and doing nothing.
You need to apply the policy map to mark packets on the port where the video source is on your network.
You need to Trust DSCP on all of your trunk ports or the switch will ignore the dscp markings.
QOS may only be one of many issues that may be causing your problem. Your AP's could be overloaded with clients, your data rates may not be optimized, etc..
I hope this helps
Scape

Oracle EBS R12 implementation scenarios

Dear All,
We have below 3 different scenarios, please give your comments/suggestions; keep in mind client wants cheeper solution.
HP DL580 G5 servers will be used with 64bit Redhat Linux 5.0 on all scenarios.
Scenario 1:)
Oracle EBS R-12 implementation with RAC & Load Balancer
Required H/W - 8 Server (4 Production & 4 UAT / Development), Hardware Load balancer
Software - RHEL 5.0 OS
Licenses - Oracle RAC
Advantages – High Availability solution, Redundancy
Disadvantages – Specialized network administrator required for load balancer management, Complex System and costly
Scenario 2:)
Oracle EBS implementation with Active Passive mode / fail safe
Required H/W - 8 Server, 4 Production (2 active & 2 passive) & 4 UAT / Development as replica of production environment
Software - RHEL 5.0 OS & Cluster software on OS Level clustering
Licenses – OS Cluster from Red Hat
Advantages – OS Level clustering is cheaper compared to Oracle RAC
Disadvantages – 2 Servers will used as Passive will not be optimally utilized they will only come into play when primary servers fail.
Scenario 3:)
Oracle EBS implementation Dual tier (DB & APPS)
Option – I (Active + Active)
Required H/W – 2 Servers for production and 2 UAT / Development as replica of production environment
Software – RHEL 5.0 OS & Cluster software on OS Level clustering
Licenses - OS Cluster from Red Hat
Advantages – All the servers are optimally utilized
Disadvantages -if one of the servers fails you might experience performance issues as both application and database services run on one node till server that failed is brought live.
Option – II (Active / Stand BY)
Required H/W - 2 Servers for production and 2 UAT / Development as replica of production environment, 2 server of UAT will be configured for stand by
Software – Oracle data guard
Licenses – oracle data guard
Advantages – Simple configuration and easy to maintain when compared to RAC and OS clustering
2) Will not experience performance problems when one of the primary fail .This is achieved by shutting down UAT or test instances till the issue on primary server is addressed
Disadvantages - Sudden spike in load cannot be addressed since load balancing feature is not available.
Best Regards,

Scenario 1:) Oracle EBS R-12 implementation with RAC & Load Balancer
When designing for "High Availability", this is quite a common infrastructure. It is pretty straightforward, though you are right, you need additional skills in managing RAC and Network. On the other hand, most larger companies have load balancers operational already. RAC may be expensive, however, if you want availability, it is what you will have to pay for, if you really cannot afford any downtime. Consider RAC when either of the following will be answered "No"
1) Can your customer really not afford more (unplanned) downtime than 20 minutes.
2) Is the maximum size of your hardware (single node database tier) sufficient to handle the amount of concurrent users in peak and will it be able to handle the expected growth for the next 12 months.
If either of the above questions answers no, consider RAC. Otherwise, one of the two alternative scenarios will probably be better.
Scenario 2:) Oracle EBS implementation with Active Passive mode / fail safe
This scenario requires additional skills as well: OS Cluster Administration skills. The main advantage in this situation is that the architecture in which EBS has to operate is quite simple. No clustering (EBS will operate on one db node and one appnode). Issues you might encounter: If dbnode fails, what will your appnode do? Will it have to be restarted? What about downtime in such a case? How much can you afford (see scenario 1). You will end up with some 'dirty' data in your database (concurrent manager). It might be necessary to clean that out first.
Another question to answer is how much do you trust your hardware/os. If it (almost) never failed on you for the past years, why would it be different in this situation. Having an active/passive cluster can be a costly architecture as well (half of your capacity being passive...)
Scenario 3:) Oracle EBS implementation Dual tier (DB & APPS)
Option – I (Active + Active)
I suspect you mean to establish a cluster that runs database package on node 1 and application package on node 2, each of them having the other node as failover node. In this situation, you will definitely encounter a performance degradation, but this can be managed by oversizing each of the nodes and/or defining a threshold for performance degradation and keeping this in mind when sizing the hardware. You would still need the cluster managing skills, though.
Option – II (Active / Stand BY)
This option will deliver you more High Availability, because this is a truly disaster resilient solution. Dataguard will duplicate the database, taking away the Single Point Of Failure(SPOF), which the database is in all previous scenarios. You should keep in mind though that the UAT environment will be affected by the standby database activity (not very much, but nevertheless). You will need additional skills, like Dataguard administration skills. I could argue about your statement that it will be easy to maintain, compared to RAC. However, like I said in my comments about Scenario 2, the operational architecture for EBS is quite simple in this architecture as well. Consider the implications on the application tier when your database switches/fails over to the standby.
Conclusion: There is no yes/no to each of the proposed scenarios. You will have to discuss with your customer to find out what the requirements are on a business level and translate them to an IT solution.
The solution should meet the needs for which it is realized and the people should be able to manage/maintain the solution. Additionally, the investment should be in line with the solution the customer requires.
Regards,
Arnoud Roth
Oracle E-Business Suite Technical Architect
Inter Access
The Netherlands

BW implementation scenarios

Hi All
I'm a rookie in SAP BW. I would appreciate if anyone can give me links or info. on case studies or industry implementations of SAP BW. One specific question I have is, can anyone give me an example of what kind of FI data is extracted from R/3 into BW and what kind of reports can be developed on it in BW?

Hi,
Welcome to SDN!!
Refer to these links:
Re: BW Implementation
FI extraction
Re: R/3 data (FICO, PS) into BW
You can refer to https://help.sap.com and also search this forum for more info.
Bye
Dinesh
<i>Assigning point to the helpful answers is the way of saying thanks in SDN. you can assign points by clicking on the appropriate radio button displayed next to the answers for your question. yellow for 2, green for 6 points(2)and blue for 10 points and to close the question and marked as problem solved. closing the threads which has a solution will help the members to deal with open issues with out wasting time on problems which has a solution and also to the people who encounter the same porblem in future. This is just to give you information as you are a new user.</i>

Use a parameter value in F4 help / Implement a wildcard F4 help

Hi,
I would like to implement a F4 help for a parameter. The user should be able to enter a text to the parameter field hit F4 and get and help screen related to the text he just entered. (pretty much like the F4 help for SE16 or SE83)
My problem is, that the entered text is not available in the report.
REPORT SELECTION_SCREEN_F4_DEMO.
PARAMETERS: filename TYPE localfile LOWER CASE.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR filename.
CALL SCREEN 100 STARTING AT 10 5
                  ENDING   AT 50 10.
MODULE VALUE_LIST OUTPUT.
SUPPRESS DIALOG.
LEAVE TO LIST-PROCESSING AND RETURN TO SCREEN 0.
SET PF-STATUS SPACE.
NEW-PAGE NO-TITLE.
WRITE: 'Pattern:', filename COLOR COL_HEADING.
* selection of filenames ...
CLEAR filename.
ENDMODULE.
AT LINE-SELECTION.
CHECK NOT filename IS INITIAL.
LEAVE TO SCREEN 0.
If a value was entered at the selection screen and a break point is set in MODULE VALUE_LIST OUTPUT, value filename is always empty.
How can the current value of parameter filename be accessed in the program?
Thanks in advance
Dominik

You would have to use a form, with hidden parameters and a method="post". Your Next link could be a submit button, or be a link with an onclick event that submitted the form:
<c:url var="thisURL" value="homer.jsp"/>
<form name="iqform" action="<c:out value="${thisURL}"/>">
<input type="hidden" name="iq" value="<c:out value="${homer.iq}"/>"/>
<input type="hidden" name="checkAgainst" value="marge simpson"/>
<input type="submit" value="Next"/>

<script type="text/javascript">
    function submitIqForm() {
      document.iqform.submit();
</script>
<a href="javascript: submitIqForm()">Next</a>
</form>

Help Implementing Threading in Extract creation using PL/SQL.

Hi Folks,
I am trying to extract data from a really large table (almost 15 GB in size) in to Flat file using a PL/SQL procedure. Since the size is too large I am thinking of implementing Threading to avoid any unexpected problems while extracting all data from table. Can someone give me an overview or an idea on what process shoud I follow to implement threading??
Any Idea and or suggestion will be helpful.. Thank you and have a nice weekend!

2. Let me explain it in more detail, may be that
might help.
Actually we are Implementing Data warehouse with
help of some consulting
group.. However, I am supposed to provide Data
into flat file as consultants do
not have access to production environment... Once
they get the data, they will
load it in to warehouse staging layer.Why would you choose flat files to transfer data from a production Oracle system to an Oracle data warehouse? Flat files are generally the last choice for this sort of project since they require the greatest effort to generate and to consume. While it is certainly possible to build a system based on flat files to exchange data, it's generally a whole lot more effort than a system that leverages the tools Oracle provides (i.e. Streams, materialized views, etc) and generally consumes a whole lot more resources. Particularly when you start getting in to situations where you're trying to generate incremental files.
I am not aware of "expdp" at all.... I am not sure
if that
will work well for my requirement... Unfortunately, since the source system is 9i, expdp is out.
Actually I wanted to figure out a way where I can
get all the data from this trans table in to flat
file without affecting much to the
performance of production environment. Streams would be really good at that on an ongoing basis, but that would require going database to database directly.
Not necessarily in the single flat file, it is ok
as long as I get all records
from the table. In your current flat file generation process, what is the bottleneck? If it is I/O bound, splitting up the work probably isn't going to do anything unless you can throw more spindles at the problem.
Justin

Help implementing scenario

Similar Messages

Maybe you are looking for