Help Implementing Threading in Extract creation using PL/SQL.

Hi Folks,
I am trying to extract data from a really large table (almost 15 GB in size) in to Flat file using a PL/SQL procedure. Since the size is too large I am thinking of implementing Threading to avoid any unexpected problems while extracting all data from table. Can someone give me an overview or an idea on what process shoud I follow to implement threading??
Any Idea and or suggestion will be helpful.. Thank you and have a nice weekend!

2. Let me explain it in more detail, may be that
might help.
Actually we are Implementing Data warehouse with
help of some consulting
group.. However, I am supposed to provide Data
into flat file as consultants do
not have access to production environment... Once
they get the data, they will
load it in to warehouse staging layer.Why would you choose flat files to transfer data from a production Oracle system to an Oracle data warehouse? Flat files are generally the last choice for this sort of project since they require the greatest effort to generate and to consume. While it is certainly possible to build a system based on flat files to exchange data, it's generally a whole lot more effort than a system that leverages the tools Oracle provides (i.e. Streams, materialized views, etc) and generally consumes a whole lot more resources. Particularly when you start getting in to situations where you're trying to generate incremental files.
I am not aware of "expdp" at all.... I am not sure
if that
will work well for my requirement... Unfortunately, since the source system is 9i, expdp is out.
Actually I wanted to figure out a way where I can
get all the data from this trans table in to flat
file without affecting much to the
performance of production environment. Streams would be really good at that on an ongoing basis, but that would require going database to database directly.
Not necessarily in the single flat file, it is ok
as long as I get all records
from the table. In your current flat file generation process, what is the bottleneck? If it is I/O bound, splitting up the work probably isn't going to do anything unless you can throw more spindles at the problem.
Justin

Similar Messages

Drop ship purchase order creation using Pl/Sql code..

Hi,
We are creating the purchase order for drop ship orders.
1. Created order with line source as external and then we ran the workflow backround processor which created a requisition for the order, using this requisition we are trying to create a purchase order with autocreate functionality by using PO_INTERFACE_S. Is this the way to create a drop ship po from backend.
Can you please suggest any other way.
Thanks in Advance.
jagdish.

Hi,
You can customize the workflow such that it creates PO automatically, by selecting the attributes "Is PO Auto Creation Allowed?" to create PO after the requisition is created.
Requisition Import will call PO Create Documents w/f to create PO.
Plz get back to me if any clarification is needed.

Mass sales order creation using BAPI

Dear All,
Can anyone help in mass sales order creation using Bapi BAPI_SALESORDER_CREATEFROMDAT2.
For example if i want to create 3 sales order with three item per order . i am populating
HEADER = 3 Records
Item = 9 records
schedule = 9 records
partner = 1 record.
Then after populating the records I am calling Bapi BAPI_SALESORDER_CREATEFROMDAT2
to create order. It should have created three order but unfortunately it creates
only one sales order. I debugged and found that records are correct both in header,
item, scheudle and partners.
Could you please guide me what I am missing for creation of mass orders.
I appreciate your time and many thanks in advance.
cheers
chandra

Hi Chandra,
Do like this.
Loop at Header table into wa_header.
*-- Move BAPI Header data
Loop at item table into wa_item where condition.
*-- in this move all Item and Schedule line item to the BAPI.
At end of item .
Use the below function modules.
BAPI_SALESORDER_CREATEFROMDAT2
BAPI_TRANSACTION_COMMIT.
Endloop.
Endloop.
Regards,
Balavardhan.K

Extracting Attrubutes using DOM API (I need help!!!!)

Hi,
I need some help on how to extract (or parse) the Attributes value in the XML using the DBMS_XMLDOM package.
Here is the XML sample.
<COMPANY>
<DEPARTMENT DEPT="10">
<EMP ID="123" NAME="JOHN" />
<EMP ID="456" NAME="PETER" />
<EMP ID="789" NAME="PAUL" />
</DEPARTMENT>
<DEPARTMENT DEPT="20">
<EMP ID="987" NAME="SIMON" />
<EMP ID="654" NAME="JAMES" />
<EMP ID="321" NAME="ANDREW" />
</DEPARTMENT>
<DEPARTMENT DEPT="30">
<EMP ID="129" NAME="JOHN" />
<EMP ID="348" NAME="PETER" />
<EMP ID="567" NAME="PAUL" />
</DEPARTMENT>
</COMPANY>
BTW, we are using Oracle v9.2.0.4.0
Thanks in advance

The following procedure may help...
procedure uploadFiles(FILE_LIST varchar2 default 'ls.xml', UPLOAD_DIRECTORY_NAME varchar2 default USER, REPOSITORY_FOLDER_PATH varchar2 default '/home/' || USER , BATCH_SIZE number default 1)
as
pathSeperator varchar2(1) := '/';
DIRECTORY_PATH varchar2(256);
SUBDIRECTORY_PATH varchar2(256);
TARGET_FOLDER_PATH varchar2(256);
TARGET_FILE_PATH varchar2(256);
TARGET_FILE_NAME varchar2(256);
RESOURCE_PATH varchar2(256);
LAST_FOLDER_PATH varchar2(256) := ' ';
sqlStatement varchar2(256);
FILELIST_XML XMLTYPE := XMLType(bfilename(UPLOAD_DIRECTORY_NAME,FILE_LIST),nls_charset_id('AL32UTF8'));
CONTENT_XML XMLType;
result boolean;
filecount binary_integer := 0;
FILELIST_DOM DBMS_XMLDOM.DOMDOCUMENT;
FILES_NL DBMS_XMLDOM.DOMNODELIST;
DIRECTORY_NL DBMS_XMLDOM.DOMNODELIST;
FILENAME_NL DBMS_XMLDOM.DOMNODELIST;
FILES_NODE DBMS_XMLDOM.DOMNODE;
DIRECTORY_NODE DBMS_XMLDOM.DOMNODE;
FILE_NODE DBMS_XMLDOM.DOMNODE;
TEXT_NODE DBMS_XMLDOM.DOMNODE;
ENCODING_ATTR DBMS_XMLDOM.DOMATTR;
REPLACE_ATTR DBMS_XMLDOM.DOMATTR;
PATH VARCHAR2(256);
FILE_NAME VARCHAR2(256);
ENCODING_TEXT VARCHAR2(32);
ATTR_VALUE VARCHAR2(256);
REPLACE_OPTION BOOLEAN;
REPLACE_DEFAULT BOOLEAN;
DEBUG_BUFFER VARCHAR2(255);
begin
-- Create the set of Folders in the XDB Repository
FILELIST_DOM := DBMS_XMLDOM.newDOMDocument(FILELIST_XML);
DIRECTORY_NL := DBMS_XMLDOM.GETELEMENTSBYTAGNAME(FILELIST_DOM,'directory');
FOR i in 0 .. (DBMS_XMLDOM.GETLENGTH(DIRECTORY_NL) - 1) LOOP
DIRECTORY_NODE := DBMS_XMLDOM.ITEM(DIRECTORY_NL,i);
TEXT_NODE := DBMS_XMLDOM.GETFIRSTCHILD(DIRECTORY_NODE);
DIRECTORY_PATH := DBMS_XMLDOM.GETNODEVALUE(TEXT_NODE);
DIRECTORY_PATH := REPOSITORY_FOLDER_PATH || DIRECTORY_PATH;
createDirectoryTree(DIRECTORY_PATH);
END LOOP;
-- Find the Local File System Path to the target Directory.
select DIRECTORY_PATH
into DIRECTORY_PATH
from ALL_DIRECTORIES
where DIRECTORY_NAME = UPLOAD_DIRECTORY_NAME;
-- dbms_output.put_line('OS Root = ' || DIRECTORY_PATH);
-- Load the Resources into the XML DB Repository
FILES_NL := DBMS_XMLDOM.GETELEMENTSBYTAGNAME(FILELIST_DOM,'files');
FILES_NODE := DBMS_XMLDOM.ITEM(FILES_NL,0);
REPLACE_DEFAULT := FALSE;
REPLACE_ATTR := DBMS_XMLDOM.getAttributeNode(DBMS_XMLDOM.MAKEELEMENT(FILES_NODE),'replace');
if not (DBMS_XMLDOM.ISNULL(REPLACE_ATTR)) then
REPLACE_DEFAULT := xdb_dom_helper.varchar_to_boolean(DBMS_XMLDOM.getVALUE(REPLACE_ATTR));
end if;
FILENAME_NL := DBMS_XMLDOM.GETELEMENTSBYTAGNAME(FILELIST_DOM,'file');
FOR i in 0 .. (DBMS_XMLDOM.GETLENGTH(FILENAME_NL) - 1) LOOP
FILE_NODE := DBMS_XMLDOM.ITEM(FILENAME_NL,i);
TEXT_NODE := DBMS_XMLDOM.GETFIRSTCHILD(FILE_NODE);
TARGET_FILE_PATH := DBMS_XMLDOM.GETNODEVALUE(TEXT_NODE);
-- dbms_output.put_line('Source = ' || TARGET_FILE_PATH);
TARGET_FILE_NAME := substr(TARGET_FILE_PATH,instr(TARGET_FILE_PATH,pathSeperator,-1)+1);
-- dbms_output.put_line('File = ' || TARGET_FILE_NAME);
TARGET_FOLDER_PATH := substr(TARGET_FILE_PATH,1,instr(TARGET_FILE_PATH,pathSeperator,-1));
TARGET_FOLDER_PATH := substr(TARGET_FOLDER_PATH,instr(TARGET_FOLDER_PATH,pathSeperator));
TARGET_FOLDER_PATH := substr(TARGET_FOLDER_PATH,1,length(TARGET_FOLDER_PATH)-1);
ENCODING_ATTR := DBMS_XMLDOM.getAttributeNode(DBMS_XMLDOM.MAKEELEMENT(FILE_NODE),'encoding');
ENCODING_TEXT := 'AL32UTF8';
if not (DBMS_XMLDOM.ISNULL(ENCODING_ATTR)) then
ENCODING_TEXT := DBMS_XMLDOM.getValue(ENCODING_ATTR);
dbms_output.put_line('Encoding for ' || TARGET_FILE_NAME || ' = ' || ENCODING_TEXT);
end if;
REPLACE_ATTR := DBMS_XMLDOM.getAttributeNode(DBMS_XMLDOM.MAKEELEMENT(FILE_NODE),'Replace');
REPLACE_OPTION := REPLACE_DEFAULT;
if not (DBMS_XMLDOM.ISNULL(REPLACE_ATTR)) then
REPLACE_OPTION := xdb_dom_helper.varchar_to_boolean(DBMS_XMLDOM.getValue(REPLACE_ATTR));
end if;
if (LAST_FOLDER_PATH != TARGET_FOLDER_PATH) then
SUBDIRECTORY_PATH := DIRECTORY_PATH || TARGET_FOLDER_PATH;
-- dbms_output.put_line('Directory = ' || SUBDIRECTORY_PATH);
sqlStatement := 'create or replace directory SUBDIR as ''' || SUBDIRECTORY_PATH || '''';
execute immediate sqlStatement;
LAST_FOLDER_PATH := TARGET_FOLDER_PATH;
end if;
CONTENT_XML := xmltype(bfilename('SUBDIR',TARGET_FILE_NAME),nls_charset_id(ENCODING_TEXT));
RESOURCE_PATH := REPOSITORY_FOLDER_PATH || TARGET_FOLDER_PATH || '/' || TARGET_FILE_NAME;
-- dbms_output.put_line('Target = ' || RESOURCE_PATH);
if (REPLACE_OPTION and dbms_xdb.existsResource(RESOURCE_PATH)) then
dbms_xdb.deleteResource(RESOURCE_PATH);
end if;
result := dbms_xdb.createResource(RESOURCE_PATH,CONTENT_XML);
filecount := filecount + 1;
if (filecount = BATCH_SIZE) then
filecount := 0;
commit;
end if;
END LOOP;
end;
For instance code to get an 'encoding' attribute from a 'file' element

Custom List Form creation using Powershell - SharePoint 2013

Hi,
I have a custom List called 'IssuesList' with 4 fields - "IssueTitle","IssueID","IssueDesc","Status"
While displaying display form I should show 3 fields expect Issue ID i.e. IssueID should be hidden.
and on edit form only Status field should be editable. So using SharePoint designer I created respective Edit form and display forms and changed XSLT to control the display mode on the fields.
I have everything scripted in powershell till now - creation of custom list, publishing pages, webparts etc. however I am looking for how to provision or associate these 2 list forms with IssuesList after I create the list in new site.
I have restrictions on using wsp and site/list template due to business needs. So I need to know if there is any way I can upload these 2 files after I create custom list in powershell and associate them as defaultdisplay and defauteditforms?
Please advise.

Hi,
Per my understanding, you might need to apply these custom forms to a list after list creation using PowerShell.
With PowerShell with SharePoint Object Model, we can hide fields on list forms.
The similar thread below with code snippet will provide more information about this:
https://social.technet.microsoft.com/Forums/en-US/ee6fc2eb-197f-4144-94fa-8a4e438675d9/hide-a-field-from-edit-form-list?forum=sharepointgeneralprevious
If there may be other requirements except for hiding fields, as you have limitation on using custom solution package(which should be preferable in such scenario),
a workaround I can provide is that, after list creation, you can add Content Editor Web Part contains the CSS style or JavaScript to the form pages of a specific list, it will help you hide/disable the specific elements, this can be achieved programmatically.
The code below can add a Content Editor Web Part to the DisplayForm of a list(though in C#):
public static void AddCEWP()
SPLimitedWebPartManager manager = null;
SPFile file = null;
using (SPSite site = new SPSite("http://sp"))
using (SPWeb web = site.RootWeb)
try
web.AllowUnsafeUpdates = true;
file = web.GetFile(web.Url + "/Lists/List018/DispForm.aspx");
manager = file.GetLimitedWebPartManager(PersonalizationScope.Shared);
ContentEditorWebPart webPart = new ContentEditorWebPart();
XmlDocument xmlDoc = new XmlDocument();
XmlElement xmlElement = xmlDoc.CreateElement("HtmlContent");
//xmlElement.InnerText = "Hello World!";
//write the custom CSS style or JavaScript here
string content = "<style>your custom style here...</style>";
xmlElement.InnerText = content;
webPart.Content = xmlElement;
manager.AddWebPart(webPart, "Top", 0);
manager.SaveChanges(webPart);
web.Update();
catch (Exception ex)
//Utility.SPTraceLogError(ex);
finally
if (manager != null)
manager.Dispose();
web.AllowUnsafeUpdates = false;
About how to hide fields on Standard List Forms using jQuery:
http://social.technet.microsoft.com/wiki/contents/articles/21730.sharepoint-2010-conditionally-hide-fields-on-standard-list-forms-using-jquery.aspx
http://stackoverflow.com/questions/10010405/how-to-hide-a-field-in-sharepoint-display-form-based-on-the-field-name-jquery
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Patrick Liang
TechNet Community Support

WLST Domain Creation using JRF template throws SQLRecoverableException

I am working on domain creation using templates and included the JRF template to use OPSS functionality.
I have run the RCU utility to create the required components that will have necessary tables to host OPSS data and also tested that it works with CC_STB user that i will use to connect from WLS.
I am able to ping the database server having RCU components from the VM where i want to create and configure the domain but when i configure the LocalSvcTblDataSource with the same ip address and try to setup the OPSS datasources, it gives me "Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified Error Code: 17002"
Below is my WLST python script:
#=======================================================================================
# Open a domain template.
#=======================================================================================
readTemplate("/u01/app/mw/Oracle_Home/wlserver/common/templates/wls/wls.jar")
#=======================================================================================
# Update the domain to enable the WebLogic Server domain with JRF and EM.
#=======================================================================================
addTemplate('/u01/app/mw/Oracle_Home/oracle_common/common/templates/wls/oracle.jrf_template_12.1.2.jar')
addTemplate('/u01/app/mw/Oracle_Home/em/common/templates/wls/oracle.em_wls_template_12.1.2.jar')
#=======================================================================================
# Configure the Administration Server and SSL port.
# To enable access by both local and remote processes, you should not set the
# listen address for the server instance (that is, it should be left blank or not set).
# In this case, the server instance will determine the address of the machine and
# listen on it.
#=======================================================================================
cd('Servers/AdminServer')
set('ListenAddress','')
set('ListenPort', 7001)
create('AdminServer','SSL')
cd('SSL/AdminServer')
set('Enabled', 'True')
set('ListenPort', 7002)
#=======================================================================================
# Define the user password for weblogic.
#=======================================================================================
cd('/')
cd('Security/base_domain/User/weblogic')
# Please set password here before using this script, e.g. cmo.setPassword('value')
cmo.setPassword('password')
#=======================================================================================
# Create and configure a JDBC Data Source, and sets the JDBC user.
#=======================================================================================
# Get RCU Configuration using RCU service table (STB) schema credentials
cd('/')
cd('JDBCSystemResource/LocalSvcTblDataSource/JdbcResource/LocalSvcTblDataSource')
cd('JDBCDriverParams/NO_NAME_0')
set('DriverName','oracle.jdbc.OracleDriver')
set('URL','jdbc:oracle:thin:@XX.XX.XX.XX:15210/xe')
set('PasswordEncrypted', 'password')
set('UseXADataSourceInterface', 'false')
cd('Properties/NO_NAME_0')
cd('Property/user')
cmo.setValue('CC_STB')
getDatabaseDefaults()
#=======================================================================================
# Write the domain and close the domain template.
#=======================================================================================
setOption('OverwriteDomain', 'true')
writeDomain('/u01/data/user_projects/domains/cc_domain')
closeTemplate()
#=======================================================================================
# Exit WLST.
#=======================================================================================
exit()
And the complete exception trace.
Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
Error Code: 17002
Error: writeDomain() failed. Do dumpStack() to see details.
wls:/offline/base_domain>dumpStack();
com.oracle.cie.domain.script.jython.WLSTException: com.oracle.cie.domain.script.ScriptException: Domain Creation Failed!
Domain Location: /u01/data/user_projects/domains/cc_domain
Reason: oracle.security.opss.tools.lifecycle.LifecycleException: oracle.security.jps.service.policystore.PolicyStoreException: javax.persistence.PersistenceException: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.4.2.v20130514-5956486): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
Error Code: 17002
Exception:
oracle.security.opss.tools.lifecycle.LifecycleException: oracle.security.jps.service.policystore.PolicyStoreException: javax.persistence.PersistenceException: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.4.2.v20130514-5956486): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
Error Code: 17002
at com.oracle.cie.domain.script.jython.CommandExceptionHandler.handleException(CommandExceptionHandler.java:55)
at com.oracle.cie.domain.script.jython.WLScriptContext.handleException(WLScriptContext.java:1967)
at com.oracle.cie.domain.script.jython.WLScriptContext.writeDomain(WLScriptContext.java:1126)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at org.python.core.PyReflectedFunction.__call__(Unknown Source)
at org.python.core.PyMethod.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.core.PyInstance.invoke(Unknown Source)
at org.python.pycode._pyx5.writeDomain$15(/tmp/WLSTOfflineIni4846195865917165143.py:73)
at org.python.pycode._pyx5.call_function(/tmp/WLSTOfflineIni4846195865917165143.py)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyFunction.__call__(Unknown Source)
at org.python.pycode._pyx93.f$0(<console>:1)
at org.python.pycode._pyx93.call_function(<console>)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyCode.call(Unknown Source)
at org.python.core.Py.runCode(Unknown Source)
at org.python.core.Py.exec(Unknown Source)
at org.python.util.PythonInterpreter.exec(Unknown Source)
at org.python.util.InteractiveInterpreter.runcode(Unknown Source)
at org.python.util.InteractiveInterpreter.runsource(Unknown Source)
at org.python.util.InteractiveInterpreter.runsource(Unknown Source)
at weblogic.management.scripting.WLST.main(WLST.java:219)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:606)
at weblogic.WLST.main(WLST.java:29)
Caused by: com.oracle.cie.domain.script.ScriptException: Domain Creation Failed!
Domain Location: /u01/data/user_projects/domains/cc_domain
Reason: oracle.security.opss.tools.lifecycle.LifecycleException: oracle.security.jps.service.policystore.PolicyStoreException: javax.persistence.PersistenceException: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.4.2.v20130514-5956486): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
Error Code: 17002
Exception:
oracle.security.opss.tools.lifecycle.LifecycleException: oracle.security.jps.service.policystore.PolicyStoreException: javax.persistence.PersistenceException: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.4.2.v20130514-5956486): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
Error Code: 17002
at com.oracle.cie.domain.script.ScriptExecutor.runGenerator(ScriptExecutor.java:3706)
at com.oracle.cie.domain.script.ScriptExecutor.writeDomain(ScriptExecutor.java:991)
at com.oracle.cie.domain.script.jython.WLScriptContext.writeDomain(WLScriptContext.java:1117)
... 29 more
Caused by: com.oracle.cie.domain.security.external.ConfigSecurityException: oracle.security.opss.tools.lifecycle.LifecycleException: oracle.security.jps.service.policystore.PolicyStoreException: javax.persistence.PersistenceException: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.4.2.v20130514-5956486): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
Error Code: 17002
at oracle.security.opss.tools.lifecycle.cie.OpssSecurityConfiguration.initializeSubsystem(OpssSecurityConfiguration.java:129)
at com.oracle.cie.domain.DomainGenerator.run(DomainGenerator.java:315)
at java.lang.Thread.run(Thread.java:744)
Caused by: oracle.security.opss.tools.lifecycle.LifecycleException: oracle.security.jps.service.policystore.PolicyStoreException: javax.persistence.PersistenceException: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.4.2.v20130514-5956486): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
Error Code: 17002
at oracle.security.opss.tools.lifecycle.OpssDomainConfigImpl.checkIfFarmExists(OpssDomainConfigImpl.java:708)
at oracle.security.opss.tools.lifecycle.OpssDomainConfigImpl.configureDBSecurityStore(OpssDomainConfigImpl.java:339)
at oracle.security.opss.tools.lifecycle.OpssDomainConfigImpl.initializeSubsystem(OpssDomainConfigImpl.java:166)
at oracle.security.opss.tools.lifecycle.cie.OpssSecurityConfiguration.initializeSubsystem(OpssSecurityConfiguration.java:126)
... 2 more
Caused by: oracle.security.jps.service.policystore.PolicyStoreException: javax.persistence.PersistenceException: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.4.2.v20130514-5956486): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
Error Code: 17002
at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.processJPAException(JpsDBDataManager.java:2088)
at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.init(JpsDBDataManager.java:955)
at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.beginTransaction(JpsDBDataManager.java:1459)
at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.beginTransaction(JpsDBDataManager.java:1455)
at oracle.security.jps.internal.common.rdbms.util.JpsDbBootstrapImpl.<init>(JpsDbBootstrapImpl.java:162)
at oracle.security.opss.tools.lifecycle.OpssDomainConfigImpl.checkIfFarmExists(OpssDomainConfigImpl.java:679)
... 5 more
Caused by: javax.persistence.PersistenceException: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.4.2.v20130514-5956486): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
Error Code: 17002
at org.eclipse.persistence.internal.jpa.EntityManagerSetupImpl.deploy(EntityManagerSetupImpl.java:614)
at org.eclipse.persistence.internal.jpa.EntityManagerFactoryDelegate.getDatabaseSession(EntityManagerFactoryDelegate.java:186)
at org.eclipse.persistence.internal.jpa.EntityManagerFactoryDelegate.createEntityManagerImpl(EntityManagerFactoryDelegate.java:278)
at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.createEntityManagerImpl(EntityManagerFactoryImpl.java:304)
at org.eclipse.persistence.internal.jpa.EntityManagerFactoryImpl.createEntityManager(EntityManagerFactoryImpl.java:282)
at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.getVersion(JpsDBDataManager.java:1027)
at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.getEMFAndSubject(JpsDBDataManager.java:1124)
at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.init(JpsDBDataManager.java:907)
... 9 more
Caused by: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.4.2.v20130514-5956486): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLRecoverableException: IO Error: Unknown host specified
Error Code: 17002
at org.eclipse.persistence.exceptions.DatabaseException.sqlException(DatabaseException.java:324)
at org.eclipse.persistence.exceptions.DatabaseException.sqlException(DatabaseException.java:319)
at org.eclipse.persistence.sessions.DefaultConnector.connect(DefaultConnector.java:138)
at org.eclipse.persistence.sessions.DatasourceLogin.connectToDatasource(DatasourceLogin.java:162)
at org.eclipse.persistence.internal.sessions.DatabaseSessionImpl.loginAndDetectDatasource(DatabaseSessionImpl.java:690)
at org.eclipse.persistence.internal.jpa.EntityManagerFactoryProvider.login(EntityManagerFactoryProvider.java:215)
at org.eclipse.persistence.internal.jpa.EntityManagerSetupImpl.deploy(EntityManagerSetupImpl.java:554)
... 16 more
Caused by: java.sql.SQLRecoverableException: IO Error: Unknown host specified
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:465)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:546)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:232)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:521)
at java.sql.DriverManager.getConnection(DriverManager.java:571)
at java.sql.DriverManager.getConnection(DriverManager.java:187)
at org.eclipse.persistence.sessions.DefaultConnector.connect(DefaultConnector.java:98)
... 20 more
Caused by: oracle.net.ns.NetException: Unknown host specified
at oracle.net.resolver.HostnameNamingAdapter.resolve(HostnameNamingAdapter.java:191)
at oracle.net.resolver.NameResolver.resolveName(NameResolver.java:133)
at oracle.net.resolver.AddrResolution.resolveAndExecute(AddrResolution.java:416)
at oracle.net.ns.NSProtocol.establishConnection(NSProtocol.java:687)
at oracle.net.ns.NSProtocol.connect(NSProtocol.java:247)
at oracle.jdbc.driver.T4CConnection.connect(T4CConnection.java:1109)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:316)
... 27 more
Any help/pointers/hints will be helpful
Thanks,
Santosh

Hi Micheal,
Thanks a Lot for your response.
We have checked the OS requirements :
System Itanium 11i (11.31) B.11.31.0803.318a Base Quality Pack Bundle for HP-UX 11i v3, March 2008+
Response:
======
We have the higher version installed for this quality pack.
QPKBASE B.11.31.1109.367a Base Quality Pack Bundle for HP-UX 11i v3, September 2011
2) Required Packages : HPDesktopDev (version B.11.31.01)
Response:
=======
This package is also installed.
X11MotifDevKit B.11.31.01 HP-UX Desktop Developer's Toolkit - X11, Motif, and Imake
3) Required Operating System Patches
PHKL_36248
PHKL_36249
PHSS_37202
PHSS_37501
PHCO_38050
PHSS_38139
Response:
========
We have the supersets for these patches installed. The installation logs also confirm these patches at the OS level.
Check Name:Patches
Check Description:This is a prerequisite condition to test whether the patches recommended for installing the product are available on the system.
Checking for PHKL_36248; found PHKL_36248. Passed
Checking for PHKL_36249; found PHKL_36249. Passed
Checking for PHSS_37202; found PHSS_37202. Passed
Checking for PHSS_37501; found PHSS_37501. Passed
Checking for PHCO_38050; found PHCO_38050. Passed
Checking for PHSS_38139; found PHSS_38139. Passed
Check complete. The overall result of this check is: Passed
Regards
Sumit Kapila

Urgent HELP required on forming the Matrix of data using PL/SQL

Hi All,
I'm new to this thread and require your urgent help in this regard.
I've got a requirement for building a 5000 X 5000 matrix using PL/SQL. My original data tables have 5000 rows each and I need to do a correlation analysis using this data and need to store in a physical table and not in-memory. Is this feat achievable using mere PL/SQL? I understand that Oracle DB has a limitation of 1000 columns(but not sure) and hence I'd like to know whether there is any work-around for such scenarios. If not, what are the other alternative method(s) to achieve this feat? Do I need to use any 3rd party tools to get this done? An early reply from the experts is highly appreciated.
Thanking you all Gurus in advance.
Rgds
Sai

Welcome to OTN!
I'll get to your quesiton in a moment, but first some welcome information. Many OTN posters consider it impolite to mark threads as "urgent". We are volunteers and have jobs of our own to do without people we don't know making demands. You are brand new and deserve some patience but please understand this. It is very likely before I finish this post someone will complain about the word "urgent" in your subject.
On to more interesting things :)
You can do the matrix, but are out of luck with a 5000 x 5000 table because Oracle only allows 1000 columns per table. There are ways to work around this.
How do do the matrix depends on what you want to do. You can do this different ways. You can create a table beforehand and use PL/SQL or simple SQL to populate it, or use the CREATE TABLE AS syntax to create and populate it in one step if you can get the underlying SQL to work the way you want, something like
create table my_table as
select a.*, b.*
from table1 a, table2 bcan populate a matrix from 2 tables with an intentional cartesian join (the WHERE clause was left out intentionally, provided your data is already in the data base.
If not you can use a PL/SQL routine to populate the data.
There are a couple of ways to solve the 1000 column limit. The easiest way might be to have 5 collections of 1000 columns each. A more complicated but more elegant soltion would be to have nested collections, allowing 2 colliections that you can loop through - a collection of collections. Nested collections can be hard to work with. A third way would be to use nested tables in the database but I personally do not like them and the insert, update, and delete statements for nested tables are hard to use.
I'm not going to give a code example because I am not sure which solution is best for you. If you have further questions post them.

I hope someone gets this who can help me. i don't find anything helpful in the help section of icloud. i'm using my 4th generation itouch for about 3 weeks with the ical. but today when i tried to edit an event or d an event a window would pop up and sa

i hope someone gets this who can help me. i don't find anything helpful in the help section of icloud. i'm using my 4th generation itouch for about 3 weeks with the ical. but today when i tried to edit an event or add an event a window would pop up and say "event can't be saved" or "no calendar chosen" or something like "this event doesn't belong with this calendar" and stuff like that.
can you please help me fix this?

You could repartition your drive to have a different OS X with the older iTunes there, and the newer iTunes on the existing partition. Back up everything beforehand. See Kappy's advice in this thread. Partitioning my Hard Drive

Material Creation Using BDCs.

Hi all,
I have developed a program for Material Creation using BDC.
Material is Being created and that is working well and good.Here i have a Requirement to update the Newly creted material in Ztable.So when i use call transaction mathod,i have written code for updation under the line CALL TRANSACTION.where in iam getting newly creatde material from MARA table,and so it is working perfectly fine..
But our requirement should be sessions method,so when i use sessions method and exeute the program..we face the problem of updation.
the piece of code for updation is updating previously created material.
Literally speaking only the sessions are created ,when the program is executed,material is not created when program is run.Material is only created when the sessions are processed using SM35,
So how should i do here,where should be the updation code written and where will we get the newly created material in sessions method..
Pls Help me in solving this problem

hai priyanaka it might be due to configuration problem
bcos manulay also ur gettign this , so just consult ur MM consultant for soem setting
regards
afzal

Auto PO creation using purchase requisition

Hi,
I have tried the following steps for auto PO creation using purchase requisition.
i. Maintain Auto PO in Material master Purchasing view
ii. Select Automatic purchase order in Vendor master- Purchase data
iii. Maintain info-record
iv. Create PR through ME51
v. enable source determination during creation of PR
vi. Execute using ME59N
But Auto PO is creating with the same document type (e.g NB) which is used while creating purchase requisition (e.g NB). Following steps have done in SPRO.
1. SPRO - MM - Purchasing - purchase requisition - define document type
a. NB- PR document type LINK TO DI01- PO document type
2. SPRO - MM - Purchasing - Purchase order - Define document type
a. DI01- PO document type LINK TO NB- PR document type
3. There is no linking from NB - NB & DI01 - DI01 but still it is creating auto PO with document type NB iif requisition has been created with document type NB.
Please suggest on this . waiting for ur quick response.
Thanks...
ARATI.
Thanks!
Arati.
Edited by: Rakesh Gupta on Aug 20, 2009 11:00 AM

Hi
Please check the below thread
PR to PO via ME59 -Doc type issue
Thanks/karthik

Simple WebService Creation using JDeveloper 11.1 Technology Preview 2

Hi,
I like the way JDeveloper simplifies the web service creation using the wizards and allows to test the web services from the IDE itself.
I have the following issues when I tried the step-by-step tutorial (http://www.oracle.com/technology/obe/obe11jdev/11/ws/ws.html) to build a web service. I greatly appreciate if some one can help me with these issues. This tutorial basically provides how to create a simple hello world kind of web service using JDev. Some of the steps are failing in my case.
Failure 1) Unable to find the WSDL document
When I invoke the "Test Web Service" menu item HTTP Analyzer is unable to locate the dynamically generated WSDL. I did try with and with-out proxy settings both the cases it failed. However I can see the WSDL if I go to the given WSDL URL in my web browser. I suspect I am missing some thing in Jdeveloper configuration. So I had to manually save the WSDL from the browser to go to further steps.
Failure 2) Failure in the Response message
When I invoke the request message I am getting the following error in the response:
"The selected message is not a SOAP message". However, if I use the browser to test the web service, it is working fine.
I greatly appreciate if you can provide me some insight into why JDeveloper is failing in these cases.
Thanks
Sunil

It started working after I restarted the JDeveloper with no proxy settings. Seems to be after changing proxy settings JDev need to be restarted to take the preference changes to be effective in this case.
Another interesting aspect that I noticed was, when HTTP analyzer is running it dynamically sets the proxy in the preferences settings as localhost with the HTTP analyzer port.
But anyway now I am able to run and test this webservice within the JDev itself.
Regards
Sunil

Reena Prabhakar - Sales order creation Using BAPI

Hi Reena,
This is Dinesh,i also face problem in Sales order creation using BAPI if you can send me the code it would be great help to me.
Regards,
Dinesh

Anyhow, here is the code that I am using currently which works perfectly well. Not sure if it will be of any help to you, since the values to the BAPI come from the Webdynpro application. I have values stored in my "Test data directory" which I use for testing from the backend.
FUNCTION ztest.
Call the BAPI to create Sales Order
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
    EXPORTING
      order_header_in     = l_order_header
    IMPORTING
      salesdocument       = l_salesdocument
    TABLES
      return              = it_return
      order_items_in      = it_order_items
      order_partners      = it_order_partners
      order_schedules_in = it_order_schdl
      order_conditions_in = it_order_conditions
      order_text          = it_order_text.
READ TABLE it_return WITH KEY type = 'E'.
IF sy-subrc = 0.
*-- error occured
    CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
ELSE.
*-- no error
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
ENDIF.
ENDFUNCTION.

Need Sample Code for Vendor creation using JAVA API

Hi,
I have a scenario like Vendor creation using Java API.
1.I have Vendors (Main) Table.
2.I have look up tables like Account Group.
3.Also Qualifier table(Phone numbers) too.
Could you please give me the sample code which helps me to create Vendor records using Java API?
I need Code samples which should cover all of the above scenario.
Marks will be given for the relevent answers.
Best Regards
PK Devaraj

Hi Devraj,
I hope the below code might solve all your problem:-
//Adding Qualified field
//Creating empty record in Qualifed table
//Adding No Qualifiers
Record qualified_record = RecordFactory.createEmptyRecord(new TableId(<TableId>));
try {
qualified_record.setFieldValue(new FieldId(<fieldId of NoQualifier), new StringValue(<StringValue>));//Adding No Qualifier
catch (IllegalArgumentException e2) {
// TODO Auto-generated catch block
e2.printStackTrace();
catch (MdmValueTypeException e2) {
// TODO Auto-generated catch block
e2.printStackTrace();
//Creating Record in Qualified table
CreateRecordCommand create_command = new CreateRecordCommand(connections);
create_command.setSession(sessionId);
create_command.setRecord(qualified_record);
try
create_command.execute();
catch(Exception e)
System.out.println(e.toString());
RecordId record_id = create_command.getRecord().getId();
//Adding the new record to Qualifed Lookup value and setting the Yes Qualifiers
QualifiedLookupValue lookup_value = new QualifiedLookupValue();
int link = lookup_value.createQualifiedLink(new QualifiedLinkValue(record_id));
//Adding Yes Qualifiers
lookup_value.setQualifierFieldValue(0 , new FieldId(<FieldID of Yes Qualifier>) , new StringValue(<StringValue>));
//Now adding LookUP values
//Fetch the RecordID of the value selected by user using the following function
public RecordId getRecordID(ConnectionPool connections , String sessionID , String value , String Fieldid , String tableid)
ResultDefinition rsd = new ResultDefinition(new TableId(tableid));
rsd.addSelectField(new FieldId(Fieldid));
StringValue [] val = new StringValue[1];
val[0] = new StringValue(value);
RetrieveRecordsByValueCommand val_command = new RetrieveRecordsByValueCommand(connections);
val_command.setSession(sessionID);
val_command.setResultDefinition(rsd);
val_command.setFieldId(new FieldId(Fieldid));
val_command.setFieldValues(val);
try
 val_command.execute();
catch(Exception e)
RecordResultSet result_set = val_command.getRecords();
RecordId id = null;
if(result_set.getCount()>0)
 for(int i = 0 ; i < result_set.getCount() ; i++)
 id = result_set.getRecord(i).getId();
return id;
//Finally creating the record in Main table
com.sap.mdm.data.Record empty_record = RecordFactory.createEmptyRecord(new TableId("T1"));
try {
 empty_record.setFieldValue(new FieldId(<FieldId of text field in Main table>),new StringValue(<StringValue>));
 empty_record.setFieldValue(new FieldId(<FieldId of lookup field in Main table>), new LookupValue(<RecordID of the value retrieved using the above getRecordID function>));
empty_record.setFieldValue(new FieldId(<FieldId of Qualified field in Main table>), new QualifiedLookupValue(<lookup_value>));//QualifiedLookUp value Retrieved above
} catch (IllegalArgumentException e1) {
// TODO Auto-generated catch block
 e1.printStackTrace();
} catch (MdmValueTypeException e1) {
 // TODO Auto-generated catch block
 e1.printStackTrace();
//Actually creating the record in Main table
CreateRecordCommand create_main_command = new CreateRecordCommand(connections);
create_main_command.setSession(sessionId);
create_main_command.setRecord(empty_record);
try
 create_main_command.execute();
catch(Exception e)
 System.out.println(e.toString());
Thanks
Namrata

Implement Digital signatures in adobe using sap

how do i implement digital signatures in adobe using sap web dynpro netweaver and abap for backend? if you can provide some documents or links that can help for the same.

Hello,
You can add digital signatures and/or encryption to the document going out of the SAP system.
To add a signature from WDA you can use the PDFObject API.
Regards,
Francois

Help required in Weblogic 6 - Creation & Configuration of Web Application

Forum Home > Enterprise JavaBeans[tm]
Topic: Help required in Weblogic 6 - Creation & Configuration of Web Application
Duke Dollars
2 Duke Dollars assigned to this topic. Reward the best responses to your question
using the icons below, or transfer additional Duke Dollars to this topic.
Welcome moinshariff!
Watching this topic.
Previous Topic Next Topic
This topic has 1 reply on 1 page (Most recent message: Jan 23, 2002 1:05 AM)
Author: moinshariff Jan 22, 2002 4:55 AM
Hi,
I am using Weblogic 6. I have created a new Web
Application called Web (I have not used the DefaultWebApp_myserver).
And I have the following settings:
Name : Web
URI : Web
and Path : C:\Web
and placed my JSP files under c:\Web\
I am able to access the first page, but after that I am not able to access the
second page.
I get "Error 404--Not Found" on the browser. Basically the class file is not getting
created under /Web-inf/_tmp_war_myserver_myserver_Web/jsp_servlet/ folder .
I tried a work around for this. I copied all my files under one more folder called
web and placed this under C:\Web
The it works. Now I have 2 copied off all the files, 1 copy under c:\web and another
copy under c:\web\web\.
If I have the files under DefaultWebApp_myserver and have the setting as
Name: DefaultWebApp_myserver
URI: DefaultWebApp_myserver
Path: .\config\mydomain\applications
everything works fine.
Can any one please let me know if there is any configuration which has to be done
so that I do not duplicate the code in 2 directories
Thanks in advance.
Regards,
Moin

Forum Home > Enterprise JavaBeans[tm]
Topic: Help required in Weblogic 6 - Creation & Configuration of Web Application
Duke Dollars
2 Duke Dollars assigned to this topic. Reward the best responses to your question
using the icons below, or transfer additional Duke Dollars to this topic.
Welcome moinshariff!
Watching this topic.
Previous Topic Next Topic
This topic has 1 reply on 1 page (Most recent message: Jan 23, 2002 1:05 AM)
Author: moinshariff Jan 22, 2002 4:55 AM
Hi,
I am using Weblogic 6. I have created a new Web
Application called Web (I have not used the DefaultWebApp_myserver).
And I have the following settings:
Name : Web
URI : Web
and Path : C:\Web
and placed my JSP files under c:\Web\
I am able to access the first page, but after that I am not able to access the
second page.
I get "Error 404--Not Found" on the browser. Basically the class file is not getting
created under /Web-inf/_tmp_war_myserver_myserver_Web/jsp_servlet/ folder .
I tried a work around for this. I copied all my files under one more folder called
web and placed this under C:\Web
The it works. Now I have 2 copied off all the files, 1 copy under c:\web and another
copy under c:\web\web\.
If I have the files under DefaultWebApp_myserver and have the setting as
Name: DefaultWebApp_myserver
URI: DefaultWebApp_myserver
Path: .\config\mydomain\applications
everything works fine.
Can any one please let me know if there is any configuration which has to be done
so that I do not duplicate the code in 2 directories
Thanks in advance.
Regards,
Moin

Help Implementing Threading in Extract creation using PL/SQL.

Similar Messages

Maybe you are looking for