Help,"InsertTextData changed while command still active" Error
I try to use the command kCreatePageFromPageCmdBoss.
The case is, open a document with one page, and add some text frame to the page, then use the command to copy this new created page 100 times.
code:
for( int i=0; i<times;i++)
InterfacePtr<ICommand> iCreatePageFromPageCmd(CmdUtils::CreateCommand(kCreatePageFromPageCmdBoss));
if (iCreatePageFromPageCmd == nil){
ASSERT(iCreatePageFromPageCmd);
break;
iCreatePageFromPageCmd->SetItemList(pageUIDList);
InterfacePtr<ILayoutCmdData> iLayoutCmdData(iCreatePageFromPageCmd,UseDefaultIID());
if (iLayoutCmdData == nil){
ASSERT(iLayoutCmdData);
break;
// it is valid to set the layout control data parameter to nil, there are times when there is no view.
iLayoutCmdData->Set(::GetUIDRef(iNewDocument),nil);
// process the command
status = CmdUtils::ProcessCommand(iCreatePageFromPageCmd);
It is troublesome that I always get the error message:"InsertTextData changed while command still active" when I debug my plugin in the indsign, what shall I do?anyone knows?
In my opinion,you can get the ILayoutControlData before the loop,
for example:
InterfacePtr<ILayoutControlData> iLayoutControlData(Utils<ILayoutUIUtils>()->QueryFrontLayoutData());
or:
InterfacePtr<ILayoutControlData> iLayoutControlData(Utils<ILayoutUIUtils>()->QueryLayoutData(IPMUnknown* inWindow));
After you get the ILayoutControlData, you can specify it in loop
as follows:
for(int32 i=0;i<times;i++)
iLayoutCmdData->Set(::GetUIDRef(iNewDocument),iLayoutControlData);
Please try it,and tell me the result,thank you!
hawkrococo
Similar Messages
-
Help please - cannot restore due to Activation Error message??
I have my husband's iPad and he has recently passed away. His iPad and iPhone say the following message" Activation Error: This device is not registered as part of the iPad developer Program...I've tried to restore them but they won't allow me. Help??
I don't want to lose any of his photos, am pretty sure he backed up before he passed away.
I can't use any of the devices because they are disabled.
I've tried setting them into Recovery Mode but it keeps stopping halfway through and telling me that the iPad cannot be restored.Error 1604:
This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the USB 30-pin dock-connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for error 1604.
When prompted, click OK.
Close and re-open iTunes while iPhone remains connected.
iPhone should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection. -
Help - SeamlessTabbing change to html - still doesn't work??
writeDocument('<object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="http://fpdownload.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7,0,0,0" width="790" height="586" ID="Captivate1">'+
'<param name="movie" value="repo_training2_skin.swf">'+
'<param name="quality" value="high">'+
'<param name="loop" value="0">'+
'<embed src="repo_training2_skin.swf" width="790" height="586" loop="0" quality="high" pluginspage="http://www.adobe.com/go/getflashplayer" type="application/x-shockwave-flash" menu="false"></embed>'+
'<param name="SeamlessTabbing" value="false">'+
'</object>');
//-->
</script>
Hello, I am working on a Captivate project with Tabbing, made the change as suggested - and the SWF still defaults to the web browser's tabbing function. I pasted the pertinent section in notepad above - can anyone see what I am doing wrong? I know I got this to work before. New to Captivate and really need an assist!
Thanks much, KellyHi there
Try amending your code as follows:
writeDocument('<object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="http://fpdownload.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7, 0,0,0" width="790" height="586" ID="Captivate1">'+
'<param name="movie" value="repo_training2_skin.swf">'+
'<param name="quality" value="high">'+
'<param name="SeamlessTabbing" value="false">'+
'<param name="loop" value="0">'+
'<embed src="repo_training2_skin.swf" width="790" height="586" loop="0" quality="high" pluginspage="http://www.adobe.com/go/getflashplayer" type="application/x-shockwave-flash" menu="false"></embed>'+
'</object>');
//-->
</script>
Note that I relocated where it was inserted. You had it following the closing embed tag, which I believe was causing it not to work. I'm thinking it needs to be within the other param statements. I tested and it seems to work fine on my own PC. At least in IE. In Firefox it doesn't seem to be necessary. Tabbing just seems to remain in the Flash Object on the page.
Cheers... Rick
Click here for Adobe Certified Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks -
While upgrade to LWAP error : AP Radios not supported.
Hello Experts,
i am using upgrade tool and LWAP image c1100-rcvk9w8-tar.123-11JX1.tar.but still i am not able to upgrade to LWAP.
when i check detail log in upgrade tool its shows the AP Radios not supported.can somebody help me in this regard. Thank you in anticipation..
Below are the logs of the AP while doing LWAP upgrade
*Mar 1 00:00:05.712: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to r
eset
*Mar 1 00:00:05.713: %DOT11-2-NO_FIRMWARE: Interface Dot11Radio0, no radio firm
ware file (flash:/5101.img) was found
*Mar 1 00:00:05.714: %DOT11-2-NO_FIRMWARE: Interface Dot11Radio0, no radio firm
ware file (flash:/5101.img) was found
*Mar 1 00:00:05.715: %DOT11-2-RESET_RADIO: Interface Dot11Radio0, Radio firmwar
e file not found, Trying hardware reset on radio
*Mar 1 00:00:12.706: %DOT11-2-NO_FIRMWARE: Interface Dot11Radio0, no radio firm
ware file (flash:/5101.img) was found
*Mar 1 00:00:12.707: %DOT11-2-NO_FIRMWARE: Interface Dot11Radio0, no radio firm
ware file (flash:/5101.img) was found
*Mar 1 00:00:13.008: %DOT11-3-POWERS_INVALID: Interface Dot11Radio0, no valid p
ower levels available
*Mar 1 00:00:13.008: %DOT11-3-POWERS_INVALID: Interface Dot11Radio0, no valid p
ower levels available
*Mar 1 00:00:13.008: %DOT11-2-RADIO_FAILED: Interface Dot11Radio0, failed - fir
mware file not found
-Traceback= 18F68 405868 3FDFB0 4072E0 129B34 129BDC 116F0 11904 1357B0
*Mar 1 00:00:13.008: %DOT11-3-POWERS_INVALID: Interface Dot11Radio0, no valid p
ower levels available
*Mar 1 00:00:13.008: %DOT11-3-POWERS_INVALID: Interface Dot11Radio0, no valid p
ower levels available
*Mar 1 00:00:15.059: %SYS-6-LOGGERSTART: Logger process started
*Mar 1 00:00:15.061: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to
up
*Mar 1 00:00:16.061: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
et0, changed state to up
*Mar 1 00:00:16.617: %SYS-5-CONFIG_I: Configured from memory by console
*Mar 1 00:00:16.617: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1100 Software (C1100-K9W7-M), Version 12.3(8)JA2, RELEASE S
OFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Tue 30-May-06 17:41 by pwade
*Mar 1 00:00:16.618: %SNMP-5-COLDSTART: SNMP agent on host RH-W-D36-AP1121G is
undergoing a cold start
*Mar 1 00:00:16.642: Writing radio coredump to 'flash:/r0.rcore'
*Mar 1 00:00:17.334: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, chan
ged state to up
*Mar 1 00:00:31.891: Writing radio coredump to 'flash:/r0.rcore'
*Mar 1 00:00:37.051: Interface Dot11Radio0: not starting because stop-on-failur
e set
*Mar 1 00:00:37.058: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to do
wn
*Mar 1 00:00:38.058: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
0, changed state to down
RH-W-D36-AP1121G#
Sh ver : and sh flash
RH-W-D36-AP1121G#sh fla
RH-W-D36-AP1121G#sh flash:
Directory of flash:/
2 -rwx 3650405 Mar 15 1993 18:04:33 +00:00 c1100-k9w7-mx.123-8.JA2
3 -rwx 272 Mar 01 2002 00:00:16 +00:00 env_vars
7 -rwx 525184 Mar 01 2002 00:00:37 +00:00 r0.rcore
5 -rwx 79 Mar 01 2002 02:12:52 +00:00 private-config
4 -rwx 2072 Mar 01 2002 02:12:52 +00:00 private-multiple-fs
6 -rwx 6626 Mar 01 2002 02:12:51 +00:00 config.txt
8 drwx 128 Mar 01 2002 02:31:37 +00:00 c1100-rcvk9w8-mx
7741440 bytes total (1694208 bytes free)
RH-W-D36-AP1121G#sh ver
Cisco IOS Software, C1100 Software (C1100-K9W7-M), Version 12.3(8)JA2, RELEASE S
OFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Tue 30-May-06 17:41 by pwade
ROM: Bootstrap program is C1100 boot loader
BOOTLDR: C1100 Boot Loader (C1100-BOOT-M) Version 12.2(8)JA, EARLY DEPLOYMENT RE
LEASE SOFTWARE (fc1)
RH-W-D36-AP1121G uptime is 23 minutes
System returned to ROM by reload
System image file is "flash:/c1100-k9w7-mx.123-8.JA2"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-AP1121G-E-K9 (PowerPCElvis) processor (revision A0) with 15038K/13
36K bytes of memory.
Processor board ID FOC08301UAW
PowerPCElvis CPU at 197Mhz, revision number 0x0950
Last reset from reload
1 FastEthernet interface
1 802.11 Radio(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:11:93:F1:0E:BA
Part Number : 73-7886-07
PCA Assembly Number : 800-21481-07
PCA Revision Number : A0
PCB Serial Number : FOC08301UAW
Top Assembly Part Number : 800-22053-04
Top Assembly Serial Number : FHK0835V1J0
Top Revision Number : A0
Product/Model Number : AIR-AP1121G-E-K9
Configuration register is 0xF
RH-W-D36-AP1121G#
Also i reformated the iamge K9w7 again as i was only able login through CMD and while explorer still this error coming-
RH-W-D36-AP1121G Home Page
Cisco Systems
Accessing Cisco AIR-AP1121G-E-K9 "RH-W-D36-AP1121G"
Web Console - Manage the ap through the web interface.
Show diagnostic log - display the diagnostic log.
Monitor the router - HTML access to the command line interface at level 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
Show tech-support - display information commonly needed by tech support.
Extended Ping - Send extended ping commands.
Help resources
CCO at www.cisco.com - Cisco Connection Online, including the Technical Assistance Center (TAC).
[email protected] - e-mail the TAC.
1-800-553-2447 or +1-408-526-7209 - phone the TAC.
[email protected] - e-mail the HTML interface development group.
Appreciate your quick response and suggestions.Hello ,
What are you refering by word Broken AP(1121series ) how do i confirm it is broken.
when i access it from CLI it looks completely fine m but when i do GUI access it shows the above GUI screen.
Can you Please help me to how to to check it is damaged.
Appreicate all your respnse.
Regards,
KA. -
While compling the form error occurs
Hi,
while compling the form error occurs like this
(Error 0 ,At line 0,column 0
Automatic recompile of procedure body pro_query failed)
it is not allowing form to compile for runing it ,what to do to solve this problem?
any idea please help
Regards
VNHi,
while compling the form error occurs like this
(Error 0 ,At line 0,column 0
ORA-00600:internel error code,arguments:(17069),(55243136),(),(),(),(),() )
(Error 0 ,At line 0,column 0
Automatic recompile of procedure body pro_query
failed)
it is not allowing form to compile for runing it
,what to do to solve this problem?
any idea please help
Regards
VN -
Activation error while changing the data type of a field of a table
hi friends,
i am facing one problem while changing a data type of a field of a table.
i just created one table(Yqm32) .i have assigned charcter data type to one field(ztotal_count) .now i want to change this charcter data type to numeric data type.
while changing to NUMC data type activation error is comming as below.
Table is not yet classified
Field ZTOTAL_COUNT: Type change
ALTER TABLE is not possible
Structure change at field level (convert table YQM32)
Check on table YQM32 resulted in errors
Table YQM32 could not be activated
(E- Structure change at field level (convert table YQM32)
plz suggest.i need to change the data type from char to numc.
Thanks & RegardsHi Pabitra......
From the SE11 change the table as u wanted and then from menubar select
UTILITIES--> DATABASE UTILITY
It will open database utility
there u select the Activate and adjust database button.
then the database table will get adjusted.
just try it once.........
Suresh...... -
i had earlier installed adobe dreamweaver cs3 on windows 7 my system got crashed, we have changed the hardware installed win 8.1 now dreamweaver is giving activation error exceeded activation limit please help
Hello,
what concerns your wish about an uinstaller, so you should use
https://helpx.adobe.com/creative-suite/kb/cs3-product-downloads.html >>> AND note this "Read before you download a CS3 product". And esp, "You need your CS3 serial number to complete the installation" but this shouldn't be a problem for you, because you had an official version and so you can use all these informations like https://helpx.adobe.com/x-productkb/global/find-serial-number.html
Hans-Günter -
I've tried Command Q to close; Tried Adobe Reader Tool Bar but closing is grayed out; I'ved held the power button for hard close, but everytime I try to open a .pdf I get this message:
There was an error opening this document. Acrobat cannot open this file because a task is still active in Acrobat.
I'm not extremely technical, but I can follow directions if someone can help!
ThanksLooks like it got stuck.
You can switch to another program or the Finder (click on desktop) and Apple menu > Force Quit > Adobe
You can press and hold the power button, it's a emergency force shutdown which you can boot normally and it should be fine. -
Activity report failed(Communication error)- while check-in Activity
Hello SDN,
I am getting following error while Checking in activity from open activities .currently we are using NWDS7.3
CHECKIN Finished24s.9Files scuceeded.
ACTIVATE Activation Performed.Build request ID : 166
Internal Problem(Activity report failed(Communication error
[cause: Unalble to open connection to host<host>:<port>][reason:Address already in use : connect]]))
Check-in completed successfully but Activation is not completed and giving connectivity error described above. Again
I activated activity from Activation view. Still I am getting following error description.Plesae provide me solution
to resolve this issue.
GET_STATUS could not retrieve activation status of request '166' (Unable to connect to
host:port-Address already in use:connect(Service call exception; nested exception java.io.
IOException: Unable to connect to host:port-Address already in use:connect))
regards,
Sree.Just check the full hostname of your DTR server, should be like
hostname.company.com
and check if somewhere only
hostname
is being used.and both are getting successfully pinged. DO not try the NWDS ping. Use command prompt and
ping hostname
and
ping hostname.company.com
Also this happens due to some clash with some other developer. Please check after some time, may be after a desktop restart. things should start working.
Edited by: Varun Biswas on Nov 29, 2011 11:53 PM
Edited by: Varun Biswas on Nov 29, 2011 11:53 PM -
SQL_Monitor for query shows DONE(ERROR) red X but Session still active
Hi. I'm just a developer so I was wondering if someone might be able to answer my question relating to the subject.
Basically I have a query that has been running for quite a while (12H) now. Thats not a problem. However, I'm confused about one thing. When I click on the SQL_Monitor tab for that query within my still Active Session it shows the SQL as having errored out. Nothing for my particular user shows up in V$SESSION_longops either. Its Oracle 11G with EM of same type. I believe that my session is still active as it still seems to be consuming resources. I don't need help optimizing my query, I've already managed to do that. I'd actually just like an answer to the following questions.
How can I tell if a query has really died?
Is it possible that a session will remain active while a query errors out and how could I detect this in my application?
is it possible for a query to be running that does not appear in V$SESSION_LONGOPS (or sql_monitoring in EM which I'm assuming are nearly the same thing)?
Is my only recourse to #2 if possible, to kill the session and start my query again?
Anyways, thanks a lot in advance. (No need to optimize this query as I've got the one that prompted this question down to about 3H and it ran fine.Tom:
Were you able to resolve this problem? I too have a similar problem where I imported the image, went into the shared components of the app, definition, and under logo selected a logo type of 'image', and the logo attributes of #workspace_images#cmclogo.gif
This gets me a box with a red x in it, but no image and no clue what's wrong.
Any help is appreciated! -
I have a cd changer cdp-cx355 showing table error, think it was knocked out of alignment while being moved how do you make sure its aligned
Welcome to Apple Discussions, rnmed13
Sorry you are still having problems.
See if this post by parkersal helps you:
http://discussions.apple.com/message.jspa?messageID=4246676#4246676
Jim
Mac OS X (10.4.9) G5 DP 1.8 External iSight -
When I use the shortcut to open a new window in safari (command N) on my Macbook Pro, I get a 404 error message from Google. How do I change where 'Command N' routes to?
It's not necessary to change the Command N keystroke..
From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Then delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.
If that didn't help, troubleshoot Safari extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall. -
Error while releasing an activity from NWDS
Hi,
I am facing the below error while releasing an activity from NWDS - transport view.
Internal error: the export of SC_CR com.xxx.xxx/xxx_SOFTWARE_COMPONENT#Track_D.118 failed. tcs returncode was 12
Check in and activate was successfull and in CMS, the activity is shown as activated.
Please help me to rectify this error.
Thanks in advance!
Regards,
Manchari. NMake sure you are connected to NWDI server.
Also create a new activity for a different component in the same track.
Below links may be helpful :
http://wiki.sdn.sap.com/wiki/display/TechTSG/(NWDI)(CMS)PropagationRequestReleaseinTransportViewFails
NWDI/CBS - release activity in consolidation
Re: Error on Release of activity (Version set not found!)
Regards
Deepak -
JCAActivationAgent::load - Error while performing endpoint activation:java.
Hi,
I am getting following error while deploying a BPEL process. This is very surprising because the process used to run fine until yesterday. Also for some time I was getting a funny error - the JDev was not able to "read" a wsdl file on local machine. I restarted the server, machine many times but it did not help. I do not have any proxies set and the file resides on my local harddrive.
<2006-04-11 11:30:20,090> <ERROR> <default.collaxa.cube.activation> <AdapterFramework::Inbound> JCAActivationAgent::load - Er
ror while performing endpoint activation:java.lang.NullPointerException
<2006-04-11 11:30:20,090> <ERROR> <default.collaxa.cube.activation> <AdapterFramework::Inbound>
java.lang.NullPointerException
at oracle.tip.adapter.fw.agent.jca.JCAActivationAgent.load(JCAActivationAgent.java:208)
at com.collaxa.cube.engine.core.BaseCubeProcess.loadActivationAgents(BaseCubeProcess.java:931)
at com.collaxa.cube.engine.core.BaseCubeProcess.load(BaseCubeProcess.java:302)
at com.collaxa.cube.engine.deployment.CubeProcessFactory.create(CubeProcessFactory.java:66)
at com.collaxa.cube.engine.deployment.CubeProcessLoader.create(CubeProcessLoader.java:391)
at com.collaxa.cube.engine.deployment.CubeProcessLoader.load(CubeProcessLoader.java:302)
at com.collaxa.cube.engine.deployment.CubeProcessHolder.loadAndBind(CubeProcessHolder.java:881)
at com.collaxa.cube.engine.deployment.CubeProcessHolder.getProcess(CubeProcessHolder.java:789)
at com.collaxa.cube.engine.deployment.CubeProcessHolder.loadAll(CubeProcessHolder.java:361)
at com.collaxa.cube.engine.CubeEngine.loadAllProcesses(CubeEngine.java:960)
at com.collaxa.cube.admin.ServerManager.loadProcesses(ServerManager.java:284)
at com.collaxa.cube.admin.ServerManager.loadProcesses(ServerManager.java:250)
at com.collaxa.cube.ejb.impl.ServerBean.loadProcesses(ServerBean.java:219)
at IServerBean_StatelessSessionBeanWrapper14.loadProcesses(IServerBean_StatelessSessionBeanWrapper14.java:2399)
at com.collaxa.cube.admin.agents.ProcessLoaderAgent$ProcessJob.execute(ProcessLoaderAgent.java:395)
at org.quartz.core.JobRunShell.run(JobRunShell.java:141)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:281)
<2006-04-11 11:30:20,152> <ERROR> <default.collaxa.cube.engine.deployment> <CubeProcessLoader::create>
<2006-04-11 11:30:20,152> <ERROR> <default.collaxa.cube.engine.deployment> Process "CallHomeBPEL" (revision "1.0") load FAILE
D!!
<2006-04-11 11:30:20,230> <ERROR> <default.collaxa.cube.engine.deployment> <CubeProcessHolder::loadAll> Error while loading p
rocess 'CallHomeBPEL', rev '1.0': Error while loading process.
The process domain encountered the following errors while loading the process "CallHomeBPEL" (revision "1.0"): null.
If you have installed a patch to the server, please check that the bpelcClasspath domain property includes the patch classes.
Please help.Finally , I was able to redeploy the process. After comparing new files with old files I observed an activationAgents entry in bpel.xml, which was not present previously.
<activationAgents>
<activationAgent className="oracle.tip.adapter.fw.agent.jca.JCAActivationAgent" partnerLink="CallHomeFileUtility">
<property name="portType">Read_ptt</property>
</activationAgent>
</activationAgents>
when I removed this from bpel.xml the process deployed successfully. Not sure when the <activationAgents> is added to bpel.xml
Thanks for your inputs. -
DSO Activation Error - While Installing BI Content
HI Friend,
First, I deleted one sap source systems for BW1 ( My bw1 server BI is : BW1CLNT100 ), later ,I create the same sap source system, But active 0FIAP_O03 ods,
had error:
DataSource 80FIAP_O03 does not exist in source system BW1CLNT100 of version A
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object 0FIAP_O03
I go to BW1CLNT100 datasoucres ,I not finded 80FIAP_O03 datasoucre, But I goto bw prd BI datasoucre, I found 80FIAP_O03 datasoucre.
I think loss 80FIAP_O03 datasoucre for BW1CLNT100 source system, because I am't delete Roules on the 0FIAP_O03 infosoucre for delete sap soucre systems.
DSO Activation Error - While Installing BI Content
this problem no issue, So I create new thread.
Now, How could me create or load 80FIAP_O03 datasoucre for BW1CLNT100 source system?
Now, I Replicate Datascoure for BW1CLNT100 source system, Delete old datasocure....... I go home, I will try tomorrow .Hello,
You should generate the export data source for 0FIAP_O03 again, if there is still a problem please goto
RSA1 > SOURCE SYSTEMS > and right click on the relevant source system, find the datamart application component and
right click on this to replicate the datasource.
Best Regards,
Des
Maybe you are looking for
-
Different material description for RG1 register
Dear Experts, I have a client requirement for change in material description (materialmaster) to a different description. The description maintained in material master is for viz SS CT BT 200mm-123-093MKO But excise need description SS BILLET Where t
-
Problem with the preview window in Premiere Elements 10
Hi guys, I have a question: I have a new PC (data follow) and Adobe Premiere Elements 10. My problem is that I see in the preview-window only one grey picture. The sound runs without problems! In other chats I red, that perhaps my graphic card is the
-
Import/Export from Access MDB to Oracle DB
Dear Friends, I need to import a huge table from access to Oracle. I tried to export the file from MS Access to Oracle, it is giving error. I tried another way of doing , i first exported the data to SQL server and then using Export/Import utility of
-
Getting error Invalid length parameter passed
Hi, I'm getting an error running my query. It say "Invalid length parameter passed to the LEFT or SUBSTRING function. I will be getting the string in between of hyphen using the code below. May i ask your assistance or idea on how to fix this issue.
-
How to wipe everything and start over from the beginning in Lightroom 4
i had photos all over the place including in Lightroom I moved them all to an external hard drive now I want to reinstall Lightroom but can't find the disc. How to wipe everything and just restart.