Help! Is there a bug in the looping tunnels for LabVIEW 6?

I have an application written in LabVIEW 6.0.1 where I've been having
problem with.
1. Big sequence structure. In the first sequence, generate and pass a
2D array through sequence locals into a while loop in the second
sequence.
2. In the while loop, use a case loop controlled by boolean switch and
a second case loop to make sure the case is only executed once. Within
the case loop, multiply each dimension of array with one multiplication
factor. Build the array back together and display them in a graph.
My problem is as follows: Every time I turn the case On/off, the array
values were multiplied with memory, i.e., it seemed that the tunnel
remember the results of the previous case loop ex
ecution, and
multiplied on top of that instead of the original values (the array
that were NOT multiplied) that passed through the tunnel.
Is this a bug? Can somebody help me? If interested, please send an e-
mail to [email protected], and I'll forward you a copy of the vi that will
show this issue. Thanks.
Sent via Deja.com
http://www.deja.com/

Ensure that you are initializing the shift register with a null value.
wrote in message
news:92gerp$2ov$[email protected]..
> I have an application written in LabVIEW 6.0.1 where I've been having
> problem with.
>
> 1. Big sequence structure. In the first sequence, generate and pass a
> 2D array through sequence locals into a while loop in the second
> sequence.
> 2. In the while loop, use a case loop controlled by boolean switch and
> a second case loop to make sure the case is only executed once. Within
> the case loop, multiply each dimension of array with one multiplication
> factor. Build the array back together and display them in a graph.
>
> My problem is as follows: Every time I turn the case On/off, the array
> values were multi
plied with memory, i.e., it seemed that the tunnel
> remember the results of the previous case loop execution, and
> multiplied on top of that instead of the original values (the array
> that were NOT multiplied) that passed through the tunnel.
>
> Is this a bug? Can somebody help me? If interested, please send an e-
> mail to [email protected], and I'll forward you a copy of the vi that will
> show this issue. Thanks.
>
>
> Sent via Deja.com
> http://www.deja.com/

Similar Messages

  • Is there a bug in the WebService tutorial for JDeveloper 9i?

    In reading through the JDeveloper 9i tutorial for building a web service, the final step generates the DateTimeServiceStub.java, but the testing that follows does not use this class, it uses the DateTimeService class.
    I built a Web Service based on the this tutorial and when I test with "MyClass.java" it works fine, but when I try to use "MyClassStub.java" it throws the ClassNotFound Exception below:
    java.lang.NoClassDefFoundError: HTTPClient/ModuleException
         at mypackage.RandomQuoteStub.<init>(RandomQuoteStub.java:21)
         at mypackage.RandomQuoteServlet.doGet(RandomQuoteServlet.java:27)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:195)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:309)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
    If we are supposed to use the Stub methods, any thought as to why it fails?
    If we are NOT supposed to use the Stub methods, any thought as to why they are generated.
    (Yes, I am a bit new to Web Service development).
    Thanks in advance for any answers,
    RB

    Hi Richard,
    I ran into another problem when I tried to create a web service and call this web service following the tutorial from Oracle9i JDeveloper Release 2.
    The following error message occured after I ran DateTimeClient class:
    [SOAPException: faultCode=SOAP-ENV:Protocol; msg=Unsupported response content type &quot;text/html&quot;, must be: &quot;text/xml&quot;. Response was:
              &lt;DIV class=Section1&gt;
              &lt;P class=MsoNormal
              style=&quot;mso-list: none; mso-list-ins: &apos;&apos; 19991102T2025&quot;&gt;&amp;nbsp;
              &lt;/P&gt;
                  &lt;TABLE border=1 cellPadding=0
              style=&quot;BORDER-BOTTOM: 4.5pt outset; BORDER-LEFT: 4.5pt outset; BORDER-RIGHT:
              4.5pt outset; BORDER-TOP: 4.5pt outset; WIDTH: 100%; mso-cellspacing: 1.5pt&quot;
              width=&quot;100%&quot;&gt;
              &lt;TBODY&gt;
                 &lt;TR&gt;
                 &lt;TD     
              style=&quot;PADDING-BOTTOM: 0.75pt; PADDING-LEFT: 0.75pt; PADDING-RIGHT: 0.75pt;
              PADDING-TOP: 0.75pt&quot; width=&quot;22%&quot; valign=&quot;top&quot;&gt;
              &lt;P class=MsoNormal&gt;&lt;B&gt;Problem Report&lt;/B&gt;&lt;/P&gt;
                 &lt;/TD&gt;
                 &lt;TD
              style=&quot;PADDING-BOTTOM: 0.75pt; PADDING-LEFT: 0.75pt; PADDING-RIGHT: 0.75pt;
              PADDING-TOP: 0.75pt&quot; width=&quot;78%&quot; valign=&quot;top&quot;&gt;
              &lt;P class=MsoNormal&gt;The Web proxy was not able to authenticate you through
                    the authentication server because:&amp;#32&amp;#32&lt;b&gt;General authentication failure due to bad user ID or authentication token.&lt;/b&gt;
                    You will not be able to browse the Web through this proxy until your
                    credentials can be retrieved and verified.&lt;/P&gt;
                 &lt;/TD&gt;
                 &lt;/TR&gt;
                 &lt;tr&gt;
                 &lt;td
              style=&quot;PADDING-BOTTOM: 0.75pt; PADDING-LEFT: 0.75pt; PADDING-RIGHT: 0.75pt;
              PADDING-TOP: 0.75pt&quot; width=&quot;22%&quot; valign=&quot;top&quot;&gt;
              &lt;p class=MsoNormal&gt;&lt;b&gt;Message ID&lt;/b&gt;&lt;/p&gt;
                  &lt;/td&gt;
                  &lt;td
              style=&quot;PADDING-BOTTOM: 0.75pt; PADDING-LEFT: 0.75pt; PADDING-RIGHT: 0.75pt;
              PADDING-TOP: 0.75pt&quot; width=&quot;22%&quot; valign=&quot;top&quot;&gt;
              &lt;p class=MsoNormal&gt;PROXY_AUTH_FAIL_OTHER
              &lt;p&gt;&lt;/p&gt;
                  &lt;/td&gt;
                  &lt;/tr&gt;
                  &lt;TR&gt;
                  &lt;TD
              style=&quot;PADDING-BOTTOM: 0.75pt; PADDING-LEFT: 0.75pt; PADDING-RIGHT: 0.75pt;
              PADDING-TOP: 0.75pt&quot; width=&quot;22%&quot; valign=&quot;top&quot;&gt;
              &lt;P class=MsoNormal&gt;&lt;B&gt;Problem Description&lt;/B&gt;&lt;/P&gt;
                  &lt;/TD&gt;
                  &lt;TD
              style=&quot;PADDING-BOTTOM: 0.75pt; PADDING-LEFT: 0.75pt; PADDING-RIGHT: 0.75pt;
              PADDING-TOP: 0.75pt&quot; width=&quot;78%&quot; valign=&quot;top&quot;&gt;
              &lt;P class=MsoNormal&gt;The user verification was not successful.&lt;/P&gt;
                  &lt;/TD&gt;
                  &lt;/TR&gt;
                  &lt;TR&gt;
                  &lt;TD
              style=&quot;PADDING-BOTTOM: 0.75pt; PADDING-LEFT: 0.75pt; PADDING-RIGHT: 0.75pt;
              ADDING-TOP: 0.75pt&quot; width=&quot;22%&quot; valign=&quot;top&quot;&gt;
              &lt;P class=MsoNormal&gt;&lt;B&gt;Problem Cause&lt;/B&gt;&lt;/P&gt;
                  &lt;/TD&gt;
                  &lt;TD
              style=&quot;PADDING-BOTTOM: 0.75pt; PADDING-LEFT: 0.75pt; PADDING-RIGHT: 0.75pt;
              PADDING-TOP: 0.75pt&quot; width=&quot;78%&quot; valign=&quot;top&quot;&gt;
              &lt;P class=MsoNormal&gt;This might be due to transient network problems or due to the
                    user&apos;s not being authorized to use this Web proxy.&lt;/P&gt;
                 &lt;/TD&gt;
                 &lt;/TR&gt;
                 &lt;TR&gt;
                 &lt;TD
              style=&quot;PADDING-BOTTOM: 0.75pt; PADDING-LEFT: 0.75pt; PADDING-RIGHT: 0.75pt;
              PADDING-TOP: 0.75pt&quot; width=&quot;22%&quot; valign=&quot;top&quot;&gt;
              &lt;P class=MsoNormal&gt;&lt;B&gt;Possible Solution&lt;/B&gt;&lt;/P&gt;
                 &lt;/TD&gt;
                 &lt;TD
              style=&quot;PADDING-BOTTOM: 0.75pt; PADDING-LEFT: 0.75pt; PADDING-RIGHT: 0.75pt;
              PADDING-TOP: 0.75pt&quot; width=&quot;78%&quot; valign=&quot;top&quot;&gt;
                          &lt;P class=MsoNormal&gt;Contact your network support team
                                  if this problem persists, and provide the team your
                                  account information.&lt;/P&gt;
                 &lt;/TD&gt;
                 &lt;/T
         java.lang.String org.apache.soap.rpc.Call.getEnvelopeString(org.apache.soap.transport.SOAPTransport)
         org.apache.soap.rpc.Response org.apache.soap.rpc.Call.invoke(java.net.URL, java.lang.String)
         java.lang.String datetimeclientpackage.DateTimeClientStub.getDate()
         void datetimeclientpackage.DateTimeClient.main(java.lang.String[])
    Exception in thread main
    Process exited with exit code 1.
    By the way, I got the correct information when I tried to load:
    (1) http://159.249.94.139:8888
    (2) http://159.249.94.139:8888/soap/servlet/soaprouter
    which means that oc4j and SOAP server are running properly.
    Do you have any idea what went wrong?
    Thank you in advance.
    - Hao

  • Is there a bug in the as3 tween class

    Is there a bug in the as3 tween class that causes tweens to stop before completing. I read that there is and that a 3rd party tween class should be used. I'm just starting out learning as3 and experimenting but this would be good to know when I move onto more complex projects.
    Also the solution for this was to make your function global. Does this simply mean place your function in the top level of your movie.
    I have done research on this topic but I found many conflicting answers.
    Any assistance is welcome thanks in advance.

    the tween declaration (if you need one) must be placed within the scope of the function.  so, if the below function f() is defined in a movieclip, you can use any of the 3 (but don't use the last):
    ///////// most common use ////////////////////////////////////////
    var t:Tween;
    function f(){
    t=new Tween(...)
    /////// next most common use /////////////////////////////////////////
    //no declaration needed because the tween is not referenced anywhere outside the function so need not be assigned a variable
    function f(){
    new Tween(...)
    /////////// least common, not good coding, but possible ////////////
    // var t:Tween;  // declared on the root timeline, for example
    function f(){
    MovieClip(root).t=new Tween(...)
    p.s.  please mark correct/helpful answers

  • When my iPod Touch is connected to my Mac, and I select Update to update the software of my iPod Touch, I get a message saying that my iTunes software is current, but it will not update my iPod Touch software.  Is there a bug in the iPod program?

    When my iPod Touch is connected to my Mac, and I select Update to update the software of my iPod Touch, I get a message saying that my iTunes software is current, but it will not update my iPod Touch software.  Is there a bug in the iPod program?

    If you have the first gen ipod touch as your information shows, then you would have to buy a software update:
    Purchasing iOS 3.1 Software Update for iPod touch (1st generation)

  • My JPEGS are no longer being copied over to Finder.  Only a random fraction are copied.  It use to work perfect.  Is there a bug in the updated versions of iPhoto?

    My JPEGS are no longer being copied over to Finder.  Only a random fraction are copied.  It use to work perfect.  I can move them 4 or 5 at a time, but it is very time consuming.    Is there a bug in the updated versions of iPhoto?

    OK - here is what I've done in the past.  As I want to be able to save my photos on  a DVD that can be read by both a PC and a Mac, I am burning them in Finder.  I start by downloading into IPhoto.  I'll flag and edit the ones I want to print or post to the web.  After that I want to take all the keepers and move them from IPhoto to various files I create in the document  section of Finder.  I've done it both ways in the past, copy and paste or just drag over, all the files would transfer over.  Now there may be dozens of pictures that do not move over - very random, in one case there were only 6 photos and the 3 vertical ones did not copy over.
    I'm wondering if this is a software issue or if there is just too much data being moved around.  FYI there are 2 Nikon cameras I use and the files from both do this.
    Thanks

  • Is there a bug in the new photoshop CS6 13.0.1.1 update? (Mac OS 10.7.5)

    Since installing the latest update of photoshop CS6 13.0.1.1, (Mac OS 10.7.5, iMac late 2009) I have noticed the following problems: when I double click on the panels bar, the panel does not collapse, I have to right click on the bar to get the panel to collapse.  Withe the curves adjustment layer, command clicking on the image does not register the point on the curve and command shift click will not set a point on the curves. this is all happening since the upgrade. Is it me or is there a bug in the update?
    Thanks in advance

    Thanks M, you're right, I do have 13.0.1, it's just for some reason ive noticed some strange behavior in photoshop, can't figure out why. I still can't get my panels to collapse when double clicking the bar and the curves adjustment layer doesn't allow me to place a point using the eyedropper tool when clicking on the image, this has just recently started after reinstalling photoshop on my imac using the creative cloud application manager

  • Is there a bug in the latest iOS7 operating system update

    is there a bug in the latest iOS7 operating system update

    iOS 7 and System 7 are not the same.  System 7 refers to the operating system on Macs from 1991 to 1996.
    I've requested this thread be moved.

  • Luxadm probe / Could not find the loop address for  the device at physical path

    Using EMC FibreChannel Disks on a Solaris 10
    # luxadm probe
    No Network Array enclosures found in /dev/es
    Error: Could not find the loop address for the device at physical path.
    # echo $?
    255
    Any ideas how to fix?
    Thank,
    Marcel

    Hi Marcel,
    Which Solaris 10 release is this?
    I found a very old bug that says this problem is already fixed in Solaris 10 although the bug description says
    its mostly seen on Solaris 8 and 9.
    https://bug.oraclecorp.com/pls/bug/webbug_print.showbug?c_rptno=15123550
    The bug says that these errors are displayed when StorADE 2.1 is running its rasagent cron job, which executes a luxadm display. 
    This process runs in the background so the user is not aware that another luxadm display process is running.
    Work-around: Do not run Storade rasagent cron job at same time as another luxadm display process.
    I hope this might help to debug this problem but I puzzled why this might be happening if its already fixed.
    Let me know if the workaround helps or so I can follow-up with the right support team.
    Thanks, Cindy

  • Where did the "Stop" button go on the Navigation Bar in ff4? It isn't included in the Customize box. Is there anyway to install the "Stop" button for loading web pages or is this option compeletly gone from Firefox now?

    Just installed upgrade to Firefox 4.0. Where did the "Stop" button go on the Navigation Bar. I checked the Customize dialogue box and it isn't included. Is anyone else missing it? Is there anyway to install the "Stop" button for loading web pages or is this option completely gone from Firefox now? It was a very helpful button and allowed us users to stop a web page and move on if it wasn't what we needed.

    In Firefox 4 by default the Stop, Go and Reload buttons are combined and attached to the right hand edge of the location bar.
    When you are typing in the location bar it will show the Go button. When a site is loading it shows the Stop button. At other times it shows the Reload button.
    If you want separate buttons, right-click on a toolbar and choose Customize, you can then drag and drop the stop or reload buttons and place them elsewhere. If you place them in the order "Reload-Stop" on the right hand edge of the location bar they will be combined again. For more details on customizing the toolbar see https://support.mozilla.com/kb/How+to+customize+the+toolbar

  • In logic X I am trying to normalize but the track and file option in the edit window is not there at all just the drop down for pointer eraser etc. Any ideas? Thanks!..

    In logic X I am trying to normalize but the track and file option in the edit window is not there at all just the drop down for pointer eraser etc. Any ideas? Thanks!..

    Total life saver. Thank you

  • Will there be mutiuser in the new ios7 for ipad

    Will there be mutiuser in the new ios7 for ipad

    We only know what Apple has told the rest of the world about what the new features will be in iOS 7, and you can read about them here.
    http://www.apple.com/ios/ios7/
    I haven't read about allowing multiuser accounts in iOS 7 and anything more would be speculation.

  • Where can I find more informatio​n, tutorials, or examples using the toolkit NXT for labview?

    I have read all the PDF's of the page http://zone.ni.com/devzone/cda/tut/p/id/4435 :
    LabVIEW_Toolkit_for_LMS_NXT_Getting_Started_Guide
    How_To_Create_NXT_Blocks_with_NI_LabVIEW
    LabVIEW_for_NXT_Advanced_Programming_Guide
    but I want to know if you know or have more information about, tutorials, examples using the toolkit NXT for labview.
    I want lo learn more about this toolkit, but there isn't enough information...
    thanks everybody that can help me

    a  list of LabVIEW leranings can be found here
    http://www.ni.com/academic/lv_training/how_learn_l​v.htm
    for the NXT you can also look on the LEGO site
    greetings from the Netherlands

  • What is the part number for labview fds cd media only

    what is the part number for labview fds cd media only - i'll purchase on line but can't find the part.

    Randy's definately right - you should talk to your local rep. before makig any purchases, but here's some numbers to start you off:
    LabVIEW FDS for Windows2000/NT/Me/9x
    776670-03 English
    776670N-0313 German
    776670N-0314 French
    LabVIEW FDS for Power Mac OS
    776690-03 English
    LabVIEW FDS for Sun Solaris
    776680-031 English
    LabVIEW FDS for HP-UX
    777010-031 English
    LabVIEW FDS for Linux
    777756-03 English
    Copyright © 2004-2015 Christopher G. Relf. Some Rights Reserved. This posting is licensed under a Creative Commons Attribution 2.5 License.

  • Is there any bug in the documentation??

    hi guyes,
    i am refering "Oracle® Data Guard Concepts and Administration 10g Release 2 (10.2) B14239-05 August 2008" to configure physical standby database on my same host having my primary database.
    i told you it was my worst experience using any oracle documentation.
    i am using oracle 10g R2,and followd all procedure to configure physical standby database,but i think there are some bugs in this document.
    1. they have told to create controlfile for the stadby database but didnt ask to edit controlfile for new path of datafiles.
    2.they have ask to copy all primary datafiles to stdby location,but when you try to open standby database,it dosent match the path of stdby datafile due to same controlfile.
    these and there are many bugs are in this document.
    they ask to edit tnsnames.ora file but dosent provide the procedure to do so.
    i mean this is not the complete guide to follow.
    a hopeless thing
    is this a bug???
    thanks and regards
    VD

    vikrant dixit wrote:
    hi guyes,
    i am refering "Oracle® Data Guard Concepts and Administration 10g Release 2 (10.2) B14239-05 August 2008" to configure physical standby database on my same host having my primary database.
    i told you it was my worst experience using any oracle documentation.
    i am using oracle 10g R2,and followd all procedure to configure physical standby database,but i think there are some bugs in this document.I'm assuming that you specifically mean Section 3.2 Step-by-Step Instructions for Creating a Physical Standby Database
    1. they have told to create controlfile for the stadby database but didnt ask to edit controlfile for new path of datafiles.That isn't required if you follow the step by step guide since the example uses the DB_FILE_NAME_CONVERT and LOG_FILE_NAME_CONVERT database initialisation parameters. In particular see step2 and Example 3.5
    2.they have ask to copy all primary datafiles to stdby location,but when you try to open standby database,it dosent match the path of stdby datafile due to same controlfile.
    these and there are many bugs are in this document.If you have followed the steps as described in the document you won't get the errors that you describe above. You'll also note in the backup and recovery guides there is a similar example for database duplication on the same host which also uses the file_name convert parameters. If you still require help it might be useful to list the precise error and what you have set the relevant parameters to.
    they ask to edit tnsnames.ora file but dosent provide the procedure to do so.They do however, directly in the step by step guide, refer to the relevant manual - the Net Services adminsitrators guide - that contains a section http://max00994:7777/docs/db10gr2/network.102/b14212/naming.htm#sthref700 on managing net service names, if you'd read it you'll see that there are 3 different tools that you could use and that the exact steps to follow depend on your environment, given this complexity it isn't unreasonable in my view to link you directly to where the information can be found rather than to include the best part of an entire chapter on service naming in the middle of a step-by-step guide.
    i mean this is not the complete guide to follow.This particular guide does deal with standby configuration, complete with practical examples that do in fact work when followed diligently, I should know I've followed them previously on more than one occasion. It doesn't of course deal with underlying subject matter that is referenced elsewhere. I don't know what Oracle's target audience is for this book, but wouldn't think it unreasonable to assume that a dba considering building a dataguard installation was already familiar with Oracle SQLNet (it would certainly be required knowledge in my book).
    a hopeless thing
    is this a bug???As the documentation works as written I wouldn't consider it a bug. I don't personally like the particular names that Oracle have chosen for their examples, primarily because I don't like the idea of naming database services after physical location in a standby environment. You can however, if you have a support contract, log bugs against the documentation and Oracle do correct the bugs - though unfortunately in the next release of the docs and not online.
    Niall Litchfield
    Oracle DBA
    http://www.orawin.info/

  • Is there a limit to the Loops Index?

    I just imported a LOT of loops (anout 75GB in total) , and GB seemed to get very slow. Just wondered if there are any issues/limits.
    Thanks!
    Nigel

    GB is slower when initially indexing and sometimes didn't appear to index at all until I quit, restarted and tried again.
    The Loops are various Apple Loops, supplied by BigFish in the USA, ZeroG + AMG in the UK and others. Also I've imported a lot of ACID loops -there are really loads of them around. I've also done some converting of my own from various sample CD collections. It takes a little while but it's handy to have the loops for GB and Logic Pro.
    Greetings to the fabulous pink rocks in AZ!
    Nigel

Maybe you are looking for

  • 790FX-GD70, upgrade bios to 1.7 and now raid 5 hangs.

    Here are my system specs: mobo: 790fx-gd70 cpu: quad 955 at stock ram: gskill trident 6gb of ddr3-1600 8-8-8-21 video: xfx 4850/512 in CF on j-micron: 2x 320g wd3200jb western digitals for raid 0 (scratch disk) on amd raid: 4x500gb in raid 5 (data),

  • Error while doing DELTA Extraction (generic data source)

    Hi BW Experts, In my R/3, I have a generic data source ZBUT_VW. It receives data from a View which is created based on couple tables. When I do full load to the corresponding ODS, it is successful. But after that I delete the ODS and created CUBE wit

  • Lightbox within an iFrame?

    I'm organizing a gallery menu within a iFrame with the use of the typical Lightbox widget. The Lightbox works but its pop-up is confided within the tiny iFrame. Can I somehow force the Lightbox popup to load over the entire page? Apparently it is pos

  • Method call overheads, how much do they cost speedwise?

    Hi all, how much of an overhead in terms of speed and effciency (in terms of cpu time) is it to call a method from the same class to do something as opposed to defining what you have to do again in your other method...basically which is better and/or

  • Sales office, sales group language maintenance issue

    Hi All, I have to create sales office & sales group in the enterprise structure. But the problem is i want to maintain it in different languages such as russian & french,  how do i do it. Is there any specific method to be used to convert language? M