Help, logo created in CS4 copying weird in CS6!! really stuck, Please help!
I apologize for re posting this, but im trying to get some new help for my problem. I have created a logo in CS4 years ago, i need to work on it in CS6.
You can see the problem here:
http://www.bellwoodbnb.ca/1.html
When i open:
http://www.bellwoodbnb.ca/1.ai
It opens correctly in CS6,
when i copy and paste it into a new CS6 Ai file, it pastes as a faded version as seen here:
http://www.bellwoodbnb.ca/2.ai
We have checked to make sure all of the settings i can find are identical, we have replaces the CS6 pantones with legacy pantones and it did nothing. We know it opens, copy and pastes correctly in CS4 & CS5. But when copy/pasting or placing in CS6 it fades out for some reason.
Any help would be appreciated.
Thank you in advance!
There's a redirect on the site which removed the "1.ai" portion. But you can put it back in and get the download. I posted too quickly.
The reason things are different....
Pantone color builds
When you open the previous file you open the file with their existing Pantone CMYK color builds. When you paste the file, you paste and get the new Pantone LAB builds in CS6.
Illustrator CS6 Pantone+ libraries do not contain CMYK color builds. The LAB builds are not as vibrant as the CMYK builds. Pantone states this is to "better represent colors on screen". Although I'm not a fan of this.
You can read more about it here:
http://helpx.adobe.com/illustrator/kb/pantone-plus.html
If working for print, the differnce in screen representation is not really something which is supposed to matter. After all Pantone 297U is Pantone 297U on press. I find the visual differnce pretty disconcerting and always revert to previous Pantone color books.
Viewing the other thread... I don't know what more you expect to learn. Monika gave you sound advice there.
Similar Messages
-
My computer kept freeze up daily with OS X Yosemite installed a while ago, and I followed the other instruction to do "OS X" Recovery to: (1) erased my start up disk (2) Reinstalling Mac OS X Yosemite.
While about 18 or 20 minutes remaining from the installation, it went back to 2 hours 57 minutes but stuck there. I let my computer run over night but it was still at 2 hours 57 minutes. so I cancelled the installation which seemed to be the only choice.
I tried again today, erased my start up disk and reinstalled again, same situation happened again, when the remaining time said around 20 minutes, it went back to 2 hours 56 minutes and stuck there. I cancelled it again.
I read some other instructions in this community and did a hard shutdown and restarted while hold down the command key + R key. it took me to the disk manager screen and the only choice I had was the OS X Lion version.
I tried to install the OS X Lion, it said that will take 3 hours or so, after 20 minutes, a screen came up and said I need to turn off the computer by press the power button down then turn the computer on again. And I did. When I turn on the computer again, with Comand + R key pressed, I had to wait for an
internet recovery before I went back to the disk manager and trying to reinstall the OS X system. It kept coming back to ask me to turn the power off…
what can I do? Please help,
MacBook AirBoot back into the Recovery Partition. Run Disk Utility Verify/Repair and Repair Permissions until you get no errors. Then re-install the OS.
X Yosemite Installation Stuck with Minutes Remaining? -
Blank Page, Really Stuck, Please Help
Hi all,
I've got a Report that I'm running from a client application to a job server that produces a Crystal Report. When I run this report against a local server on my machine the report completes without issue but when I run it against a different server on a different machine the report displays 3 blank pages in the middle of the data. I'm using the same database, same data, same report file. This occurs ONLY when running this report against the remote server and is unconcerned with any of the above listed conditions.
-I'm using Crystal Reports 11.5
Visual Studio 2008
-My local machine is 32 bit win7, the remote server is 32 Windows Server 2008.
If anyone could give me a hand at all I would be EXTREMELY gracious.
Thanks,
RyanHey guys, thanks a ton for the responses.
I think I'm getting close. It has something to do with "Keep Together" either on the columns in a crosstab or on a couple sections within the report.
What's really still blowing my mind here is how it's different on the 64 bit machine. The client application is previewing the reports in adobe reader so I don't think the print drivers should be relevant. I did go ahead and update to Adobe Reader 10 on both machines and it had no effect but playing with these "keep together" settings seems to work .
I'll check back with final results later.
Thanks again,
Ryan -
hello,
i restored and updated my iphone 4 to the latest version of 5.1.1 and after that when i connect my mobile to i tunes all i see is a big rectangle and a apple logo on left and a small lock on right side please help me fix this problem.I sloved this issue by resting my phone from settings>general>reset>reset all settings...the problem will be fixed
-
Created PDF form in Acrobat XI Pro, but HELP fields disappear when I save FCDT file to PDF. Please help. Thanks!
I am not aware of a field type "Help" within a PDF form. I do not see it as a form field that can be added in the form edit mode.
Forms Central forms do not support all the features of Acrobat forms.
Are you talking about the "Tool Tips" or a hidden field that only shows when one enters a field and is hidden upon exiting the field. -
I shot a video clip(800MB) using my iPhone4s but could not copy to my PC (windows XP),please help me
I shot a video clip(800MB) using my iPhone4s but could not copy to my PC (windows XP),please help me
Limitation of XP, videos over 500MB's can't be imported using Camera/Scanner wizard. Try transfering these Videos directly from your phone by selecting them in My Computer and dragging or copying the movie files to your computer's hard drive.
-
Can't find a playlist I created on my playlist or computer? I didn't delete it. I don't want to create it again because it took a long time. please help me find and recover.
Playlists only exist as part of the larger iTunes library listing so if you are not seeing it there it doesn't exist anywhere else. I know with my older version of iTunes it is very easy to accidentally delete a playlist. With newer versions it may be possible to recover it with the undo feature in the menu but this likely will only work immediately after the deletion.
-
My iphone volume turns down randomly own its own. It will turn up on the buttons, but will turn back down by itself and i have to fight the volume to keep it from muting. Plus, the mute logo stays on the screen when it mutes itself. Please help.
Unfortunately this is probably a hardware issue and you will need to take it to an Apple Store.
-
How do i update my camera raw? I can not find the download update I've just brought a new d4s and I'm using the iMac with cs6 version. PLEASE HELP..
The Adobe auto updater is pretty decent in CS6. Just go to the Photoshop Help menu > Updates.
You will be able to update ACR, Photoshop and Bridge right there, if there are in fact updates available. -
cont contact apple server error please help with ipad touch 4. im just fed up with apple please help me because why is it only apple with these kind of problems?
If you mean updae server
Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem
Otherwise what server are you talking about -
I am trying to update Photoshop CS6 in order to read my camera's RAW files. It is a camera that is supported by Adobe Photoshop CS6. However, when I try to get the Adobe Application Manager to update the software, it fails to do so. (The spinning wheel tells me it is checking for updates and then quits, saying that "Update Failed - Updates could not be applied. Adobe Application Manager may be damaged. Download and install a new copy of Adobe Application Manager.")
I have tried to reinstall the Adobe Application Manager 8.0, which gives me the following error message "We've encountered the following issues. Installer failed to initialize. Please download Adobe Support Advisor to detect the problem." However, when I go to the link provided to download the Adobe Support Advisor, this piece of software NO LONGER EXISTS. "
The Adobe Support Advisor has been discontinued
The Adobe Support Advisor tool was used to analyze installer log and system information associated with installation errors. The tool has been replaced with improved installation support mechanisms. Please visit Adobe Support section for Knowledge base articles around Installation."
So, I have gone to the forums and took the recommended step to update my software manually - getting the update Photoshop_CS6_13_0_6upd-2.dmg. However, this update also fails stating that my Adobe Application Manager may be damages. Download and install a new copy of Adobe Application Manager. Which puts me right back where I started.
I have also taken the step of completely reinstalling Photoshop CS6. This did not solve the problems outlined above.
Please help!reset your preferences:
dreamweaver: http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html
flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
indesign: https://forums.adobe.com/thread/526990
lightroom: http://www.lightroomforums.net/showthread.php?14226-Resetting-%28or-Trashing-%29-the-Light room-Preferences-file
photoshop: https://forums.adobe.com/thread/375776
if that fails, uninstall ps, clean (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and reinstall. then use the manual updates. -
Dreamweaver CS4 Errors, Spry widget not working. Please Help!
I am redesigning a website and downloaded an html file from the present contact page. I opened it in Dreamweaver and I started to have this errors. The html file I opened has some JavaScripts in it and I believe, the the scripts got a conflict with Dreamweaver CS4. I already deleted these files I tried to open and still I'm encountering these errors.
These are the errors I'm getting:
1. When I open the Dreamweaver, this message pop-ups:
"While executing onLoad in RecordsetFind.htm, the following JavaScript error(s) occured:
In file "RecordsetFind"
findRs is not defined."
2. I click OK. Then I'm getting this message:
"While executing onLoad in Design Notes_onOpen.htm, the following JavaScript error(s) occured:
In file "Design Notes_onOpen"
onOpen is not defined."
3. I just click OK. Then, when I open an html file to edit or create a new one, this error pops up again:
"While executing onLoad in Design Notes_onOpen.htm, the following JavaScript error(s) occured:
In file "Design Notes_onOpen"
onOpen is not defined."
4. I will again just click OK, then this error appears:
"The following translators were not loaded due to errors:
Coldfusion.htm: has configuration information that is invalid.
SpryWidget.htm: has configuration information that is invalid."
5. Then, I will just click OK again. Then, when I'm working with the projects or creating a new project with Spry, it is not working properly anymore. I have to go the code and update the Spry list or content manually.
6. When I close Dreamweaver, I'm always having this error:
"While executing onLoad in TeamAdminTempDelete.html, the following JavaScript error(s) occured:
In file "TeamAdminTempDelete"
delTempFile is not defined"
I tried uninstalling the Dreamweaver and installing it again, but it did not work.
What should I do to make the spry working again and to remove all these annoying errors? By the way, all my Spry widgets are not working and these errors I'm encountering in all of the Sites I'm working on. How can I make it work again? I tried looking for troubleshoot in CS4, but I could not see one, only in CS3.
Please help.See if the following helps (found in Dreamweaver FAQ)
JavaScript and other unexpected errors
Mark A. Boyd
Keep-On-Learnin' :-)
This message was processed and edited by Jive.
It shall not be considered an accurate representation of my words.
It might not even have been intended as a reply to your message. -
Text in Hebrew has gone really weird in Motion and FCP - please help!
Hi,
I have been working in a project for a long time, and produced hundreds of simple titles in Motion in Hebrew. The font I have used throughout is Arial Rounded MT Bold.
In the latest title I added one text object and made it Italic. Since then, all my Hebrew text in this title and now any previous title I open appears really weird (the vowles are disjoined from the consonants). I have turned off the Italics option on all the titles but it still does the same thing.
This occurs even in a brand new title, where I paste the Hebrew directly into a new text object.
I am desperate for someone to help me, as I have a tight deadline on this one. All previous titles I open appear the same, even though they were fine in the past. I have tried deleting the preference file.
I am using Motion 4 (FCS 3) on a iMac bought last year, quad core intel.
Please help!
ThanksThank you so much!
Arial did not work, but Arial Bold and Arial Hebrew did!
The font doesn't match what I was using before. I have no idea what it was using previously, but at least I can proceed from here. My previous projects have all been output to movie files so even if the motion files are now messed up, it's not the end of the world!
Thanks again -
Can anyone please help me on this issue "What to do when my iPhone is asking for password of old apple I.D. when I don't have it and have created a new applie i.d."??
Sir, Thank you very much for your prompt response. I have already done this. But the problem is still persisting. Actually, I want to upgrade my WhattsApp application and as soon as I click the upgrade button in App Store, it asks for the password of previous apple i.d., which I don't have as I have bought this phone from somebody. There is no option for log out or log in. It there any other way out to upgrade the WhatsApp ????
-
How to create windows executable file from a java file. Please help.
Hi,
For my project I developed the codes in Java. It is working well with java run time environment. But without that I can not run it. I need to create a exe file (windows executable file) from the java source code. If you have any idea please share it with me.
Even if you know it very lightly, please help with what you know. That would be a big help for me.
Thank you very much.Does anybody know how to read a manual?
Matt Richardson
Certified LabVIEW Developer
MSR Consulting, LLC
Maybe you are looking for
-
Hey am stuck in a problem here am trying to upload a file using HttpOutputStream at the client side and at the server side trying to read the file using ServletInputStream .Everytime in the middle of writing the file from ServletInputStream i encount
-
My MacBook Pro air is working very slow... And occasionally the screen just has an envelope with a?
My MacBook Pro is moving very very slow and occasionally when the screen comes on it's an envelope with a? What do you all suggest
-
Why does the Adobe Acrobat DC Update Fail on a Mac Running OS X Yosemite 10.10.2?
I don't have Adobe Acrobat installed anymore, yet CC is still telling me I need to update Adobe Acrobat DC. When I try to update it, it gets to 35% and fails, every time. I've tried quitting and reopening CC; quitting CC, deleting the OOBE folder in
-
My purchased items aren't appearing in "Music" after ios5 update
OK, I'll try to put this simply. I'm using an iPhone 3GS if that makes any difference. I updated to IOS5 this morning, and it removed all of my music. Not a problem as I can sync it up again from my laptop. But, I "downloaded" all previous purchases
-
Assigning field symbol to a form parameter
Hello there. I got this huge string that concatenates several columns from a structure and I have to distribute these data into fields of a generic work area in a FORM. The thing is that I can't find the right way to pass this work area and when I tr