Help- lost bios setup disk

Where can i download the bios setup disk for my neo-2 FISR motherboard. I lsot it before i finished building my comp and now it boots up in japanese with some error and says missing NTLDR or something. i need to set my bios up thanks.

Go Here and follow the instructions exactly. It describes how to make a bootable floppy and add the Bios image.
Before you do that though, Are you not able to hit delete on boot-up and enter the Bios. If it's set to Japanese, enter the first menu on the left and the first menu AFTER the date/time gives language options. This is on a 875P board but if it's the AMI Bios it should be similar.

Similar Messages

  • Help: MY MSI-865GM3-V keeps on restarting when i enter bios setup

    Good day.
    My computer always restart and it keeps on restarting then an error occurred "CMOS checksum error - defaults loaded" and when i'm trying to enter bios setup it restarts automatically.
    CPU specs:
    Processor: Intel Pentium duo 2.80GHz
    Motheboard: MSI-865GM3-V
    Video card: Inno 3d fx 52000-8x  256 MB AGP
    Memory: 512 MB DDR
    Hard disk: 80 gig MAxtor 7200
    i hope someone will help me on this thanks. 

    Quote from: Jack the Newbie on 15-April-07, 17:27:53
    What kind of PSU are you using?  List amperage(s) on the +12V-rail(s) also.
    Have you tried clearing CMOS? (remove main power plug from PSU first)
    When did this problem first appear? 
    i'm using ATX power supply 500W,  I'm not familiar with amperage stuff so i'll just write the list in the PSU
    INPUT | 115V ~ 10A   60Hz   230V  ~ 5.5A   50Hz
    Output   |   +5V   |   +12V   |   -5V   |   -12V   |   +3.3V   |   +5VSB
    500W     _______________________________________ ____________
    MAX       |   45A   |   18A     |   0.5A  |  0.8A    |  28A       |  2A
    I tried clearing CMOS in fact i changed the CMOS battery at first it work, I can run the BIOS again and the windows xp is working again then suddenly after 2 hrs. my pc restarts again and it keeps restarting again and i can't go to BIOS setup.
    It happen 3 days earlier when i'm just surfing in the internet then suddenly it restarts and since then it keeps on restarting.
    I'm using pentium duo core 2.8 GHz processor

  • I downloaded lion but lost the setup assistant.  please help me recover the setup assistance.  i do not know where/how to find/enter information in the terminal.

    i downloaded lion but lost the setup assistant.  please help me recover the setup assistant.  i do not know where/how to find/enter information in the terminal as was suggested.

    Launch the Terminal application; e.g., by entering the first few letters of its name in a Spotlight search.   Copy or drag -- do not type -- the line below into the Terminal window, then press return:
    sudo rm /var/db/.AppleSetupDone
    You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. Confirm.
    Reboot. The Setup Assistant will launch.

  • Help. I lost my driver disk that came with my ipod.

    I lost the driver disk that came with my ipod mini brfore i instaled it onto my computer. is there anyone that can help me by directing me to a place where i can download one online or can i get a new one sent to me. thankyou for all your help. I have a 4 gb ipod serial number 4J5188FPS41

    You can download both iTunes and the iPod updater from Apple's website; no other software from the CD is required to use the iPod.
    (9572)

  • Help. I lost my installation disk on my 8330 Curve

    I lost my installation disk for my Curve 8330. I've never installed the program into my computer but need to save my info as I'm getting a new Blackberry on Friday and don't want to lose my phone book. Without the disk I can't sync my phone to save the info. What can I do?
    Solved!
    Go to Solution.

    Can you be a little more specific?  You've already installed on the PC and you get that error when?  Have you rebooted your computer?   And, crazy question...is the Application Loader running?  Did you click on "Application Loader?"
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • Neo 875 Bios setup for RAID - HELP PLEASE

    Have tried just about everything. I am unable to access the DISK ARRAY BIOS setup. Any ideas???

    Quote
    Originally posted by Flyboy747
    Have tried just about everything. I am unable to access the DISK ARRAY BIOS setup. Any ideas???
    hi
    have you enabled the RAID chip in your BIOS?
    good luck

  • Help! I lost my Install disks!

    I lost my Install disks and need to reinstall my System files. Any ideas where I can find a used set?????
    Powerbook G3, Pismo   Mac OS X (10.4.1)  

    Dahn:
    Welcome to Apple Discussions.
    If you are talking about the original restore disks you can call Apple Customer Service with your serial number and they will send you new ones for a fee. Or you can look on eBay for a Mac OS 9.0.2 (Mac OS ROM 3.5). If you also need the AHT Disk the PowerBook 1.0, 1.1, 1.2, 1.2.1, 1.2.2 and 1.2.3 disks will work.
    If you need Tiger, as Tom indicated, you will need a Full Retail Version which you can purchase from the Apple Store or online suppliers, or on 4 CDs from applerescue.com
    Good luck.
    cornelius
    Message was edited by: cornelius

  • MOVED: Help: MY MSI-865GM3-V keeps on restarting when i enter bios setup

    This topic has been moved to Intel P4 & Celeron P4 based board.
    https://forum-en.msi.com/index.php?topic=107624.0

    Quote from: Jack the Newbie on 15-April-07, 17:27:53
    What kind of PSU are you using?  List amperage(s) on the +12V-rail(s) also.
    Have you tried clearing CMOS? (remove main power plug from PSU first)
    When did this problem first appear? 
    i'm using ATX power supply 500W,  I'm not familiar with amperage stuff so i'll just write the list in the PSU
    INPUT | 115V ~ 10A   60Hz   230V  ~ 5.5A   50Hz
    Output   |   +5V   |   +12V   |   -5V   |   -12V   |   +3.3V   |   +5VSB
    500W     _______________________________________ ____________
    MAX       |   45A   |   18A     |   0.5A  |  0.8A    |  28A       |  2A
    I tried clearing CMOS in fact i changed the CMOS battery at first it work, I can run the BIOS again and the windows xp is working again then suddenly after 2 hrs. my pc restarts again and it keeps restarting again and i can't go to BIOS setup.
    It happen 3 days earlier when i'm just surfing in the internet then suddenly it restarts and since then it keeps on restarting.
    I'm using pentium duo core 2.8 GHz processor

  • Please Need Help!!!! (845e max bios setup)

    i bought all my computer parts seperataly.
    p4 1.7
    845e max
    radeon 9000 pro
    128 ddr
    Turning on the power for the first time the whole system worked fine (no operationg  system is installed yet). while i was seting up the ami bios, specifically in the PnP&PCI configuration, i came across the PLUG AND PLAY AWARE O/S (manual description: when set to yes bios will only initialize the PnP cards used for booting . the rest of the cards will initialized by the PnP operating system like 98, 2000 or ME. When set to NO, bios will initialize all the PnP cards. Select Yes if the operating system is plug and play aware.  all of a sudden the ami bios screen wasn't on my monitor. i rebooted and no ami bios setup.
    i have the led D-BRACKETS connected to my motherboard and all of them are in red colour. it says on the manual that it will show informaion regarding the the processor.
    anyway my cpu isn't busted  i know because i went back to the retailer i bought it from and they did a test for me which cost me $20.00 cdn and it worked fine.
    anyhow contact me if u have a suggestion
    email:[email protected]

    this mother board is jsut crapp there are alot of peopel having this problem i say replace it becsuae i got the same one over again and it died mabe i amjsut doing somethign wrong

  • How to Get New Windows Setup Disk

    I got an r61i with Windows XP a couple of years ago.  I purchased another hard drive and installed Linux on it.  That is what I normally use, but, I kept the drive with XP when I need to use Widows.
    I seem to have lost the drive with XP on it.  I guess I'll have to get another drive and get a new setup disk, but, I can't find out how on the Lenovo site.  I bought the computer new (through CDW).   I saw another post where someone with the same computer downloaded Windows XP, but, I can't find any mention on the Lenovo site of either obtaining a CD or downloading.
    Does anyone know?

    http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-4M7HWZ#purchase
    start here to get restore media.
    T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    If someone helped you today, pay it forward. Help Someone Else!
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Linksys BEFW11S4 version 3.2 need help finding software setup

    Hey i have a wireless access point router its older and i lost the software disk and the support page on here only has firmware ugrades it had a setup wizard but everytime i download it and launch it it brings up a firmware upgrader      the router is the linksys BEFW11S4    version 3.2     if any1 knows where i can find the software to install it to my computer please help me find thanks

    Don't worry if you have lost the disk, you can configure your router manually...You can set-up your router manually by entering it's default ip address, 192.168.1.1, no username and default password is admin...

  • Insert "Mobile Device Setup Disk" or Itunes not regonizeing Itouch/phone

    How to fix itouch that said install mobile device setup disk or it was not recognized by itunes. So here this can help you fix that. *> = go to.*
    First: Make sure you have the latest itunes installed.
    Second: Open up device manager.To get there, Start menu > Control Panel(*make sure your in catagory mode!)*> Performance and Maintenance> System> Go to tab named Hardware> Click Device Manager Button
    Third: A new window should pop up named Device manager. Go to the bottom where it says Universal Serial Bus Controllers click the little [+] The Ipod should be the first on the list, if not leave the manager open and replug in the USB wire again and it will come up.
    Fourth: Right click the ipod > properties > go to driver tab> update driver.
    Fifth: new mini window opens named hardware update wizard. click bubble yes this time only, click next. The error message will come up saying has not passed logo testing,click continue anyway.
    Sixth: finally almost done. It asks now Insert Mobile Device Setup Disk.click ok.go to the pop out list and click C:\WINDOWS\SYSTEM32. Click browse. new mini window pops up, named locate file, go all the way to the end and there's a file named usbaapl or usbaapl.dll or usbaapl.sys click on that. If it is not located at the end of all the folders in the window. go to folder named drivers and look for it there, click it and open it.Click Ok, then Finish annnd there ya go!
    Message was edited by: Saikeishi13

    I got to step 3, but even after repeatedly plugging and unplugging the USB cord, iPod wont come up in device manager.
    My 2nd generation iPod touch has always worked fine and synced with my computer without hassle, now all of a sudden it wont come up at all in iTunes, its not under devices or anything. iPod comes up with a charging symbol but computer doesnt see the iPod at all, anywhere. i have tried restarting iPod & computer numerous times, have re-installed iTunes twice, have restarted the ADMS, i've followed every single suggestion that ive seen and it still isnt working. Saw this post and havent tried this yet so thought id give it a go, but as i said it doesnt come up in the device manager as you say it should......am at a total loss and extremely frustrated.
    Also - quick question, because i re-installed iTunes, does this mean i have lost all the apps i have downloaded and once i eventually can sync my iPod with computer, will i lose all apps from iPod as well??

  • Satellite 1400-103: Cannot access the BIOS Setup

    I'm having problems getting into the BIOS setup. At the 1st bootup screen I press ESC key then message appears Check system. Then press F1 key. Once key is pressed it doesn't take me to BIOS setup and laptop reboots. Any help will be much appreciated.
    James

    No it doesn't. There is a problem with the OS and I was gonna do a repair using an XP disk. I have been trying to boot from cd rom by pressing C button and I've also tried pressing F12 key to change boot device. The teacher whose laptop it is has put a bios password on bootup but I'm assuming this shouldn't affect bootup or accessing the bios setup. I'm not sure if it's a supervisor password or administrator password.

  • I need BIOS setup for 5005-S504

    Hello,
    I no longer have the original disks, the laptop was OFF for 8 years and the CMOS battery was dead. Windows was corrupt and I installed Win Vista. I need to access the BIOS but the Win XP HardWare utility download won't run in VISTA. Hitting ESC when it boots doesn't work. F2 doesn't either.
    How can I access the BIOS setup screens? Is their a reset button somewhere on the motherboard? 
    Any help appeciated.

    Satellite 5005-S504
    You might try one of the methods mentioned in here.
       BIOS Setup / BIOS settings -- access instructions
    If the Esc key doesn't work, you're probably out of luck. Why Vista?
    Can you boot to DOS, BTW?
    -Jerry

  • I'm using MS-5136& I forgot my password in the BIOS setup

    I'm using MS-5136 & I forgot my password in the BIOS setup
    What can I do ?
    I've lost the manual
    The web site shows only chapter 2 of the manual
    I cannot find any batteries to remove to reset the bios
    Is there a way of shorting a jumper or  ???
    Any help is appreciated
    TIA
    [email protected] ?(  ?(

    There is a JRTC by the bios and RTC chips. Try that.

Maybe you are looking for