Help me for creating a Typing Tutorial

hi,
Am a beginner in java. I want to know the codes for creating a typing tutorial. please help.
Stanly Mathew

hi,
Am a beginner in java. I want to know the codes
des for creating a typing tutorial. please help.Start with a tutorial on Swing: http://java.sun.com/docs/books/tutorial/uiswing/
More specifically, you will need to know about
- Layouts
- JTextPane, JEditorPane
- KeyListener

Similar Messages

Has there been any helpful remedy for the ghost typing issue?

Has there been any helpful remedy for the ghost typing issue? Where the ipad starts typing on its own and screens moving around the screen?
I have had the ipad 1 for a while- and it started about 5 months ago. Anything other than shutting down and leaving alone for hours work?

Yeah, well if you read that whole thread you will see lots of posts identifying it as a hardware problem:
I'm the original poster on this thread. I ended up taking my iPad back to the Apple Store. They ran some diagnostics, and found that my RAM was almost maxed out, which didn't really make sense. It indicated a faulty processor, so they gave me a new iPad. I took it home, synched, and it only took about 45 minutes to synch 30 gigs of data. My original iPad took about 5 hours to synch for the first time. Clearly there was a problem with the processor in the first one, but I didn't realize it at first, as it took several weeks before it started exhibiting the erratic screen behavior. Hope this helps anyone else who might experience this down the line.
-merenvov
So i went to my apple store... which was PACKED. Found a manager and explained my problem. Without any question, they simply replaced it. Awesome!
-duncanwilcox
I have the same problem, and I found out what's wrong, it's not the software - restart, restore and FW upgrade will not help, it's definitely hardware. The best option is to replace your iPad assuming you have an apple store nearby…
-DarkDwarf
Just get your iPad replaced. It has a hardware problem.

Please Help me for creating BexReport.

HI Experts,
Please help me to create the below report.
          < 5 days or less      6-10 days          11-15 days      16-20 days     > 20 days
No of Orders     3          5               2                          10                       20
*** %                   7.50%        20%             25%                50%                           100%
where <5days or less is the count of age(present date - order on date) of the Orders which falls under respective bucket.
Thanks and regards
KPS Moorthy.

space       I< 5 days or less I     6-10 days              I 11-15 days     I 16-20 days I     > 20 days
No of Orders     I   3      I   5                I 2I     10     I 20
*** %I     7.50%     I20%     I25%   I     50%I     100%I
i differenciated every column by "I".
Shanbhu: Thanks for Reply.
for AGE: if we do in backend start routine the time wen we execute the DTP that day date is taken for age calculation.But we want the age calculation as present date(time wen the report is executing)-Create on order date.
Thanks and regards\
KPS moorthy

Please help me for create flash boot in windos os

hi .my mac book is crash hard disk .i dont acses to enother macbook pro for create botable flash disk .please help me for make botable flash disk in windos 7 for instal and create partishen new hard disk.thanks

We are not macbook pro forum, question about Windows and Boot Camp should go there, not knowing your mac but likely has internet recovery that works even with a "crash" hdd. I assume you know how to go about swapping out for a new one (time to get an SSD) or you can just boot from Windows w/o flash and install, all w/o Boot Camp Assistant.
www.macsales.com sells kits - empty external case for old drive, new drive or ssd, and also memory upgrades.
And you can install Mac OS to any external drive. Like your backup TimeMachine and just shrink and make a 40GB partition for OS X.

Help Needed For Creating A Game

Hi, I recently decided to make a MMORPG.A game people will enjoy and have fun, I would of course keep it free sense I have play many games that cost 5-15 dollars a month.I have many creative ideas, but I need someone to show me the ropes and teach me how to use Java and i currently looking for a site to download it at.If anyone would care to teach me how to use this or would like to help me create this game(Medievil type game, Swords armor gold houses dragonslaying and plenty more) post here or send me a pm and we can talk more private.
I need:
*A site to download the best possiable Java console
*Helpful tutorial sites
*Or any other sites or tips you think i should know.
Extra Info On Me:
I dont know if this matters or not probably doesnt but I know how to handle and make a site, ive had some dbz rpgs back in the day(kinda rusty but i can manage).
Some more recent information:
I tried game maker and that doesnt seem to helpful.It would only be helpful if I played them 20 bucks which I am not going to do.
Also i am downloading now JS2E 5.0 for Java.
I am stilling waiting on some type of input or even a mentor.

Hi there!
I'm not really a game programmer.. but here's some links anyway.
Someone pointed out this tutorial to me, and I think it is worthwhile:
http://fivedots.coe.psu.ac.th/~ad/jg/
It has stuff on Java 3D, networking, games for mobile phones/PDAs, isometric tile games, etc. It also has an appendix on loaders and Java Web Start.
Also, if you want to create 3D games, you might want to check out
http://www.3dcafe.com/asp/freestuff.asp
They have free 3D models in various formats.
For more 3D links and tutorials try:
http://www.3dlinks.com/
For a 3D tool, I like Anim8or. That it's free helps a lot ;)
http://www.anim8or.com/
And... ms paint!?! You will not be able to draw decent graphics with that. Adobe Photoshop Elements is a nice, low-cost program for 2D images.
There are lots of sites devoted to java game programming. Try the google. Love the google. Google is your friend. ;)
:) jen

Help needed for creating 1 invoice for 2 different material types.

Dear, Gurus
I really need help here I have spent 3 days cracking my head trying to solve the problem. Problem is client was creating invoice with reference to order and while invoice was being made it would cause an invoice split. The materials involved are Trading Good and Service Material. They would like only 1 invoice. Note nothing was different except material group and item cat. of the material. payment terms billing dates partners everything is same.
Current item config for Trading Good material is ZMPI-project item cat.
Copying requirements   023 Item ord.ref. w/o AZ        Billing quantity     A
Data VBRK/VBRP         000                                           Pos./neg. quantity   +
                                                                                Pricing type         K
                                                                                PricingExchRate type
                                                                                Price source
Current item config for service Material is TAD-Service
Copying requirements   002 Item/order-related          Billing quantity     A
Data VBRK/VBRP         001 Inv.split (sample)            Pos./neg. quantity   +
                                                                                Pricing type         G
                                                                                PricingExchRate type
                                                                                Price source
I was told to change Data VBRK/VBRP to 003 One Invoice which I did in both of these item cat. and yes they worked perfectly but at time of creating the invoice for service material the qty that showed was 11. Note: In sales order it is 1 qty. So I went back into the config of item cat TAD and changed copying requirement to 023 instead of 002 but nothing changed. Seems a qty of 10 is referencing something else which I have no idea what or where it is picking this up from. Just to see or test things I went into the sales order and tried changing the service material qty then a weird popup appears and says service order 12344456 has been blocked. (Seriously I have no idea why this would happen or should be existing at all.) Even if for some reason it is being referenced the service order that is existing is qty 1.
I really really do need help and if someone can help me that would be god sent.
Regards, Ali

You did not mention what value is maintained in the field billing quantity in the copy control->Item settings. Check for the service item, what value is assigned. Put value A and re-test.
Note that whenever you change any settings in configuration side, you need to create a new documents to test the results of the settings. You should not use the existing documents.
When you say the document is blocked, then check the status of the sales order to find the reason for blocking (like credit block, approval etc)..
Regards,

Help required for creating Row Renderer for JTable

Hi all,
I am trying to create customize row renderer for JTable.
My requirements are as below.
|-----------------|-------------------|------------------|------------------|-------|----------------|
|Category | Product ID |Description | Unit Price |Qty | Sub-Total |
|-----------------|-------------------|------------------|------------------|-------|----------------|
I have designed a combobox for category and product ID columns inside JTable. I want to put a listener on Category ID such that product IDs in selected categories will be visible in product ID drop down of selected row keeping other rows unchanged.
Column renderer is defining a class for entire column but by setting that im getting same values in all the rows for product IDs. And if I update values for one product ID dropdown, entire column data is changing.
Even im not able to put array of combobox for product ID column as number of rows are not fixed and increasing runtime.
Can anyone suggest me how can i customize Cells under particular column with JComboBox?
Regards,
Mahesh Kedari
Fidus Technologies Ltd.
Edited by: m1JustM1 on Feb 8, 2010 4:48 AM

Start by reading [this |http://java.sun.com/docs/books/tutorial/uiswing/components/table.html#editrender] tutorial. If you still have questions afterward, feel free to post an SSCCE .

Help Req for creating tool tip for value

Hi ABAPers,
I have created the search help for material.
In search help output screen ,
I have the column contain a long text with the output lenght as 40 char that is displayed and once i put the mouse on it the entire long text should apears.
Kindly help.
Thanks & Regards
Sachin Yadav

If it is a input text field... i think not possible.
This is only possible for buttons on toolbar (as far as i know)

Help needed for creating a SQLLoad control file

I have 2 fields in my flat file
If field1 = field2 load only field1 into tn and aux = NULL
else if field1 != field2 load field1 into tn and field2 = aux
Here is what I have so far - I need help with the "Where"
-- ActiveNumbers.dat
-- Steve J
load data
INFILE 'active.date'
INTO TABLE tmp_ac_active
APPEND
FIELDS TERMINATED BY '|'
(tn CHAR(10), aux CHAR(10))
Thanks in advance
Steve

Thanks Joel
Using the document you provided here is what I came up with. I notice this is 9i documents - I'm on 8. Does the SQLLoader work the same in both versions?
This is the first time I've used this tool - No one here has even heard of it. (Well except for the DBA)
load data
INFILE 'active.date'
-- Loads tn and aux if they do not match
INTO TABLE tmp_ac_active
WHEN tn != aux
(tn CHARTERMINATED BY WHITESPACE,
aux CHAR TERMINATED BY WHITESPACE)
-- Loads only TN if both are the same
INTO TABLE tmp_ac_active
WHEN tn = aux
(tn POSITION (1:10) CHAR)

Help needed for creating a bookmark function

Hi there,
I am creating an application which in a kind of way gives the user the possibilty to make the same things as he reads an ebook written in html as if he would read a normal book. He highlights some lines, he makes some bookmarks and he can take some notes. All the changes he makes are saved in a database
I finished the highlighting function and now want to make the bookmark function. What I imagined is sth like the acrobat reader's bookmark manager so I will put it on the left side of a splitpane. The user will be able to add or delete a bookmark in the html ebook with a name of the bookmark and the link and these bookmarks will be saved in the database.
Do you have any suggestions how I can solve this? Which api should I read/use, do you know some examples? How I can make bookbarks in some parts of the pages and not only the whole pages. I mean the the page will load after the press of the bookmark to go to a certain place in that page and not in the begging. In general some ideas how I have to work?
Thanks

It's a swing. I can send you the application if you want but it's 10 classes to post it here.

Help needed for creating new component in web ui

hi experts,
i need documentation on the component workbench. i need to cretae a new assignment block in web UI, similar ti the items assignemnt block in opportunity screen.
Where can i find material to learn how to develop new components using component workbench?
Thanks,
Shantanu.

Hi Shantanu,
In fact, you need to create a context node. You can create this context node using the wizard. Click with right button in "Context node" of the view and follow the steps.
Best regards,
Caíque Escaler

Plz help me for create connection

Sir
wellcome, i want to develop an single user application and i want to use oracle database
instead of microsoft access.
plz guide me which components of oracle database must be installed?
can i use oracle database driver instead of jdbc-odbc bridge if it is possible where from i get and
how can i use plz give me a example of code and how i set the path of database driver.
if u have another sugesstion plz guide me that which database(cloudspace,hsqldb etc) i use
ane wher cloudspace(free) available with driver and how use?
i am very thankfull to u.
actually i develop an application totaly plateformindependanet
which run on 98,2000,and also xp but oracle for xp is not found me and i do not know how i configure
oracle which run on xp.

instead of microsoft access.
plz guide me which components of oracle database must
be installed?Use Oracle 8i or 9i Database server >> client optional
can i use oracle database driver instead of jdbc-odbcUse a ConnectionLess DSN
bridge if it is possible where from i get and Use oc4j.jar file and classes12.jar
Search google.com on Using JDBC with Oracle for more information
-Regards
Manikantan

What Tool i use for creating OAF (Page)

Hi All,
I am new in Oracle EBS my boss given task for develop page in OAF, so please guide me what tool i use for this page given me link for download it and also help me for creating this page.
Currently we are using Oracle EBS R12.1.2.
Thanks
Rehan

I am new in Oracle EBS my boss given task for develop page in OAF, so please guide me what tool i use for this page given me link for download it and also help me for creating this page.
Currently we are using Oracle EBS R12.1.2.OA Framework - How to find the correct version of JDeveloper to use with eBusiness Suite 11i or Release 12.x [ID 416708.1]
Configuring JDeveloper For Use With Oracle Applications 11i and R12 [ID 330236.1]
Troubleshooting JDeveloper setup for Oracle Applications [ID 357218.1]
What Setup is Required to Create Custom JSP Pages to Run on the Ebusiness Suite 11i and R12+? [ID 884200.1]
Thanks,
Hussein

Someone has a tutorial for creating screen exit?

I have a development and I do not know how to create screen exit.
Case Someone has a tutorial for creating screen exit please help me
Thank you
<b><i>Wagner Duarte
Consultant - SAP ABAP</i></b>

hI
Screen Exit is nothing but enhancing the screen like creating some more fields, subscreen and so on.
1. Go to the screen>System>Status-->Program (Double
click this program. It will take you to the program.
2. Now, Goto-->Object Directory Entry.
3. Make a note the package name.
4. Now run the transactions SMOD, press F4 and enter the
above noted package, press enter.
5. It will display list of Exits.
6. Now go back to the initial screen SMOD.
7. Specify the exit name here and select the radio button
Components.
8. It will display four group boxes one for FM, second
for Fcodes, thrid for Screen areas and last for
includes.
9. Goto transaction CMOD, create a new project, and
click the button "Enhancement assignments" and
specify your enhancements that you got in SMOD.
10. Now bouble clikc the enhancement, it will take you to editor with some includes starting with Z, double clikc the include you want to edit and proceed.
Have a look at below link It will definately help you to undestand the same.
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
check these links.
http://help.sap.com/saphelp_46c/helpdata/en/c8/1975e643b111d1896f0000e8322d00/frameset.htm
http://www.allsaplinks.com/screen_exit.html
USER EXITS
https://forums.sdn.sap.com/click.jspa?searchID=672084&messageID=312792
https://forums.sdn.sap.com/click.jspa?searchID=672084&messageID=1320078
https://forums.sdn.sap.com/click.jspa?searchID=672084&messageID=2669896
How to implement screen exit for a SAP standard transaction
Introduction
SAP provides standard transactions to enter data into database. But a client may want to maintain some additional information in SAP other than what is provided.
To make provisions for this, additional screens have to be provided and additional fields must be added into appropriate database table.
To pave way for this, SAP has provided the option for screen exits. Usually, SAP provides the following:
An append structure in the database table with the new fields.
A subscreen area into the standard screen where the programmer can attach his subscreen of his own program with the new fields.
A function group under which the new subscreen has to be created with the new fields.
Function exits to synchronize the PBO and PAI of the standard SAP program with the PBO and PAI of the subscreen so that data can flow back and forth between the standard SAP program and the program written by the developer for the subscreen. These function modules also exist in the same function group under which the subscreen will have to be developed.
Finally, a linkage has to be done between the subscreen area of standard SAP screen with the custom subscreen constructed by the developer.
Typically, SAP provides an enhancement in which the developer can create an append structure, use the function exits to synchronize the PBO and PAI of the standard SAP program and the custom subscreen program, and make the necessary linking( as mentioned above in step 4. But, again, this is not a hard and fast rule. Linking in some case, is also done by configurations.) SAP also usually provides the name of the function group under which the subscreen has to be developed.
Necessary guidance about implementing a screen exit development is usually available in the Documentation section of the enhancement ( can be availed by transaction SMOD).
Pre-Requisites
The developer to work on screen exit should have essential knowledge on the following:
DDIC concepts, including the knowledge of append structure.
Concept of SAP Enhancements and implementing them using Projects.
Concept of function exits.
Knowledge on Module Pool including subscreens, Tabstrip controls etc.
Steps
Guidelines
So, a developer can follow the guidelines mentioned below to implement a screen exit to a standard SAP transaction, as and when required:
Find out the Required Enhancements
Go to SMOD. Press F4 in the Enhancement field. In the next popup window, click pushbutton SAP Applications. A list will appear that contains information on all the enhancements, categorized under functional areas. Developer must search for the enhancements relevant to his functional area of interest for e.g., Purchasing, Asset Accounting, etc.
Note down the enhancements. Then, come to the initial screen of SMOD and view the documentation of each enhancement to find out which one is required for your development.
Utilize the Enhancement in a Project
After you have found one, do as directed in the documentation. Generally, the steps are as follows:
Create a project using CMOD including your enhancement.
Create the append structure with new fields.
Go to the desired function group and create a subscreen with the new fields. Write PBO and PAI for the subscreen, if required.
Use the function exits in the enhancement to link the PBO and PAI of the subscreen with that of the main SAP program supporting the SAP transaction.
Maintain necessary linkage between the subscreen area of standard SAP program with the custom subscreen developed along with the custom program name. This can be done in the project (developed by CMOD including the enhancement) or outside as a part of configuration.
Activate the project.
Test to ensure that required functionality are met.
Case Study 1
Add three new custom fields for Asset master and maintain information for them
Requirement
Three fields in the legacy system have to be maintained in Asset master. These fields are:
Original Asset number 20 characters
Location 2 15 Characters.
Model no 20 characters
Location 2 should start with L.
Pre-Analysis
Finding out the Enhancement
As described above, the enhancement is determined. It was found, that enhancement AIST0002 will serve the purpose. It contains the following components (can be viewed by transaction SMOD):
Exit Type Description EXIT_SAPL1022_001 Function Exit Check of User-Defined Fields when Using Create and Change BAPI EXIT_SAPLAIST_002 Function Exit Transfer Data for User Subscreens in PBO. EXIT_SAPLAIST_003 Function Exit Transfer of User-Defined Fields to SAP Master Data Transactions CI_ANLU Customizing Include Include structure to add new fields
Studying the Function Exits
The function module level documentation for the function exits are then viewed from transaction SE37. The documentation clearly laid out for the purpose for their use:
EXIT_SAPLAIST_002
Function module Level Documentation
This function module is called by asset master data maintenance at the start of the dialog. (When changing, it is called after reading of the data from the database; when creating it is called after the transfer of the default values from the asset class and reference asset.) The purpose of the function module is to enable this function group to recognize the master data. For interpreting or controlling master data fields that are important for user fields, it is possible to transfer to global variables at this point, so that they can be recognized when the user subscreens are processed.
Import Parameters
Understanding
This function module is called at the PBO to pass the information retrieved from the database to pass them to the custom subscreen and its underlying program. Import parameter : I_ANLU will be populated with the values for user-defined fields which will be passed to the subscreen program. So, there must be some sort of variable assignment from I_ANLU.
EXIT_SAPLAIST_003
Function module Documentation: This function module is called by SAP asset master data maintenance after the screens are processed, but before saving. The purpose of the function module is to transfer fields entered on user sub-screens of SAP asset data maintenance to the database for updating. The export parameter for this function module is:
Understanding
This function module will be used to transfer the user entered data in the subscreen fields to the main SAP program, which will then be saved into the database.
Studying the Documentation of the Enhancement
The enhancement documentation (as is viewed from the initial screen of SMOD] also supports the idea. Moreover, it informs that we need to develop a subscreen under function group XAIS. This is the function group under which the two function exit modules also exist. So, if the custom subscreen refers to the global data of the function group XAIS, then those values will also be available to these function exits as well.
Going to SE80 and viewing the function group XAIS helps us to inform that there are three DDIC tables declared for it:
Deciding the Final course of Action
After making all the investigations, the final course of action was determined.
SrlNo Step Justification
A project has to be created using transaction CMOD where the enhancement AIST0002 will be included.
Customizing include CI_ANLU has to be created with the custom fields demanded When CI_ANLU will be developed, the custom fields will get appended to the database table ANLU. Also, these fields will be used to create screen fields in the new subscreen.
A custom subscreen, say, 9000 will be developed under function group XAIS. The screen group for the screen will be CUST (or any name). The three custom fields added to table ANLU (by creating CI_ANLU) will be used to create new fields in the screen.
In the PAI of the subscreen, validation for Location to start with L will be added. The subscreen with three new fields has to be developed so that it can be attached to a subscreen area of the asset master screens.
In the custom include of the function exit module EXIT_SAPLAIST_002, the following code will be written:-
ANLU = I_ANLU. I_ANLU is the import parameter of this FM. The value is assigned to the global variable ANLU, referring which the three new subscreen fields are developed. So, data retrieved from database table ANLU will be passed to this FM as I_ANLU by the standard SAP main program. The value will be taken and passed to the global variable of the function group XAIS, so that the three custom fields (referring to ANLU of XAIS) get populated.
In the custom include of the function exit module EXIT_SAPLAIST_003, the following code will be written:-
E_ANLU = ANLU. The changed values in the subscreen fields exist in global variable ANLU for the function group XAIS. This function exit module will pass the data back to the SAP main program as E_ANLU.
Proper linkage/configuration has to be done so that the new subscreens get linked to the appropriate subscreen area of the Asset master screen. This has to be done otherwise, the new custom subscreen will not be displayed in the Asset master screens.
Development
Creating a Project to include the enhancement
Go to transaction CMOD and create a project.
Enter a description for the project. Then, click on the pushbutton Enhancement Assignments in the Application Toolbar.
Enter the name of the enhancement and Save.
Go to Components.
Creating Custom Include for ANLU
The screen shown below will appear, showing all the enhancement components under the assignment AIST0002. Double-click on the name of the Include Structure to create it.
Create the include structure with three new fields, as required. Then, save and activate it.
Develop the subscreen and the program
Go to transaction SE80. For the function group XAIS, create a new subscreen 9000.
Create it as subscreen.
Then, go to the Layout of the screen and create three new fields from Database table ANLU.
Drag the fields in the screen body and place them.
Then, save and activate the screen and come back to screen flow editor.
Create the PAI module to add validation for field Location 2, as required .
Activate the whole function group and come out.
Write code in the Function Exits to synchronize the programs
Now, code has to be written in the function modules EXIT_SAPLAIST_002 and EXIT_SAPLAIST_003 so that data flows to and fro between the main SAP program and custom subscreen program. For that, go back to transaction CMOD and change the function exits.
Write code in the function module EXIT_SAPLAIST_002 called once at the beginning of the transaction:
Write code in EXIT_SAPLAIST_003 to pass the data from the subscreen to SAP main program.
Then, activate everything the whole project and come out.
Complete the configuration to link the subscreen
The development portion is complete. Now, linking of the subscreen has to be done with the subscreen area of the main program. In most of the cases, this linking can be done in the enhancement itself. But, here, requirement is a bit different. It is done by configuration using SPRO.
Assets are created under Asset class. And for each asset class, there is a layout assigned to it. For a layout, there are multiple tab pages assigned to it. And, for each tab page, there are multiple screen groups/field groups assigned.
Here, the requirement is to create these three custom fields in the tab page General of asset master screen ( AS01/AS02/AS03/AS91).
Determine the Layout
To achieve this, first of all, we need to find out which layout is assigned to asset class 1000.For that, go to transaction AOLK( information has to be obtained from functional consultant).Select the Asset Class 1000 and click on folder General Assignment of Layout.
Here, for Asset class 1000, for all the user groups, tab layout SAP is assigned. Since layout SAP cannot be changed, it has to be copied and manipulated to include our screen group. Later, the new layout has to be assigned over here.
Create new tab layout
Go to transaction AOLA. Copy the tab layout SAP to create another layout, say, YSUB.
System will copy all the settings and will inform you about that.
Select your newly created layout and double-click on the folder Tab page titles.
You want to put your custom fields in the tab page General. So, select this tab page entry and double-click on the folder "Position of Groups".
Here, all the field groups currently residing in the tab-page General are shown. Add an entry for your newly created fields.
Select the group box from the list. An entry will come with U padded with the custom subscreen prepared by you.
Then, save and come out.
Assign the new Layout to Asset Class
Now, go to tcode AOLK and assign tab layout YSUB for asset class 1000.
Save and come out.
Test the Exit
Everything is over. Now, go to transaction code AS01/02/03 or AS91 to deal with an asset of asset class 1000. You will see your new fields added to the screen. Add values to themsave. Then, enter into the tcodes again to see whether the values entered by you are being displayed or not.
Original Source: ittoolbox.com
Screen Exit is nothing but enhancing the screen like creating some more fields, subscreen and so on.
1. Go to the screen>System>Status-->Program (Double
click this program. It will take you to the program.
2. Now, Goto-->Object Directory Entry.
3. Make a note the package name.
4. Now run the transactions SMOD, press F4 and enter the
above noted package, press enter.
5. It will display list of Exits.
6. Now go back to the initial screen SMOD.
7. Specify the exit name here and select the radio button
Components.
8. It will display four group boxes one for FM, second
for Fcodes, thrid for Screen areas and last for
includes.
9. Goto transaction CMOD, create a new project, and
click the button "Enhancement assignments" and
specify your enhancements that you got in SMOD.
10. Now bouble clikc the enhancement, it will take you to editor with some includes starting with Z, double clikc the include you want to edit and proceed.
and you just go through these links also
Screen exit
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
screen-exits
Check the following link.
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=how%20to%20find%20screen%20exits&cat=sdn_all

Please Help for Create Animated_Gif

Hello All i recently Create a Animated Gif file for a Site and for creating it i have use 4 JPEG image and add all by Photoshop>Animation with Frmae time 4sec. When i have save it and set Dither 100% and Optimize 100% but now image show scattered .when uploaded on website please look at http://www.printsasia.com/
Please suggest how to get Good Quality in GIF image.my all JPEG image has Good Quality
Please Check all JPEG images

First thing is you are mistaking the quality of jpg vs gif. There is no way to get the same quality as a jpg, it just does not have enough colors. If you took a jpg image and converted to grayscale, then it would have the same number of colors even though they all would be shades of gray. Gray is color so...
Jpg does not support transparency, layers or animations which is why it is not a good candidate for web animations. If you need full color, full transparency, and/or animations then you amy want to consider flash. Currently it is the only format for the web that supports all 3 and layers.
That being said, png does have a sister format for animations but is not supported in all web browsers.
Another alternative is quicktime, or windows media. Each can play in a web browser if the plugin is installed they both support full color and transparency (the latter supported under certain circumstances {correct codec}) But not all users have either or both video players installed, so most of the time it will work, but there is that chance.
The lastest version of HTML is suppose to support the quicktime format but I don't know enough about how well it is supported via HTML and the number of Browsers. But it is an option that is worth keeping an eye on.
So for a gif file...
Keep in mind that the entire file that includes all frames must maintain a maximum of 256 colors with 1 of the colors reserved for transparency. Which is the reason for harsh borders on a transparent edge of the image. Not enough shades for transparency to have a smooth gradation.
Even though your second image may work fine, odds are the first image will not and will look as you put "scattered". Simply because each of those books are made up of multiple shades of that color times the number of colors needed for all the books, background, text, etc. Even the reflection effect for the text is made up of multiple shades of that color. So in reality it just does not have enough colors in the table to make the image look smooth.
I hope this helps some, I am sure it is not quite what you wanted to hear, but if you do a bit of research or throw your hands up and say good enough. You will at least know why and it wasn't you to blame, it is the outdated technology of the gif format.
Good luck at which ever way you decide to travel...

Help me for creating a Typing Tutorial

Similar Messages

Maybe you are looking for