Help me in e-business Suite R.12 installation on Win XP SP2

hi all...
i have selected "EBS for windows 32-bit" as my final year project development tool and now i am facing difficulties in installation.
the steps i have done are as follows...
1. Installed ActivePerl 5.10.0
2. Installed Cygwin and replaced the following files
=>gawk.exe to awk.exe
=>make.exe to gnumake.exe
=>deleted gcc.exe(shortcut) and cc.exe(Shortcut)
=>grep.exe to egrep.exe
=>gcc-3.exe to cc.exe
=>deleted cc-3.exe
3. Installed MS VC++ Standard Edition (In a folder named "VC6" with "Register Environment Variables" checked and it contains two folders then named as "Common" and "VC98") and copied link.exe to C:\system32
4. Added DNS Suffix in Computer\Properties\Computer Name\Change\More"
5. Set My ip to "192.168.1.52" and connected to a PC with ip "192.168.1.53"
6. Set both PCs Subnet Mask to "255.255.0.0"
7. Added Path of "C:\cygwin\bin" and "C:\VC6\VC98\bin" to "Computer\properties\advanced\environment variables\path"
8. Did Staging Successfully
But when i run installation then it passes all the pre-Checks and there is an error at the "99%" of phase "1" of "5" with the error messages as
=>Cannot add user to Application Access ACL
and
=>Cannot add user to Application Launch ACL
and
=>No mapping between Account Names and Security Ids was done
I am running Installation with Default Administrator Account ...can anybody help me out of this As soon as possible....I can provide with the log files of installation......Thanks in Anticipation...

Hi,
its just a package i have with the name MS visual C++ 6.0 standard edition You should not use Microsoft VC++ 6.0 as it is NOT supported with R12.
and i didn't installed MS visual studio separately...You can either go with MKS or Cygwin, so if you have installed latter it should be OK.
this error appears in a command prompt window which just shows up for a very little time and on the gui , there comes up a pop up window which states something like "error running external process" and it has only two options "Abort" and "Retry" and after retry the problem is the same....Please post the complete error message from the installation log file.
are the cygwin files correct that i am replacing and deleting?what do you mean by replacing and deleting?
....I hope you will help me to get out of this problem...and i read your post and you told to install loopback adapter and i previously tried installation with the steps told by you and it also generated the same error so i didn't installed the loopback adapter this time...I believe the error is irrelevant to the loopback adapter. Anyway, please post the complete error message from the log file so we can suggest something to resolve the issue.
Regards,
Hussein

Similar Messages

Help with 11i E-Business Suite Install on Windows XP

I've tried unsuccessfully to install the E-Business Suite on Windows XP machine. I repeatedly get the following message during the install (I start from a clean restored environment each time) " RW-20001 Error: Unzip failed: Insufficient disk space: Please create enough space for the intstall". I get this message even though I have only used 100GB of a total of 500GB. I'm installing from DVDs provided by Oracle.
I also get an error message related to the "Listener". The detail of this message is included below.
Any suggestions to get past this would be appreciated.
Question on the Domain Name Configuration:
When i follow the instructions from a previous thread and do
C:\ipconfig I get the following:
Connection-specific DNS Suffix: PMSC.COM
IP Address : 192.168.0.103
I added PMSC.COM per the instructions in the thread.
The original entry in the host file was:
127.0.0.01 localhost
It is now:
127.0.0.01 localhost
127.0.0.01 localhost.PMSC.COM
I'm trying to set this up as a standalone installation with everything on the harddrive of this computer. I'm confused as to what the correct host entry should be and if this is the cause of my intallation failures. I can provide as much information as possible to help diagnose my probelms. Thanks.
The only error messages I can find in the log files show a problem with the Listener. The error message is as follows:
LSNRCTL for 32-bit Windows: Version 9.2.0.6.0 - Production on 05-JAN-2007 17:30:43
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCPMSCDEV))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Connecting to (ADDRESS=(PROTOCOL=TCP)(Host=pmsc_main.pmsc.com)(Port=1521))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
LSNRCTL for 32-bit Windows: Version 9.2.0.6.0 - Production on 05-JAN-2007 17:30:44
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 9.2.0.6.0 - Production
System parameter file is C:\oracle\pmscdevdb\9.2.0\network\admin\PMSCDEV_pmsc_main\listener.ora
Log messages written to c:\oracle\pmscdevdb\9.2.0/network/admin\pmscdev.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCPMSCDEVipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PMSC_Main.PMSC.COM)(PORT=1521)))
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCPMSCDEV))
STATUS of the LISTENER
Alias PMSCDEV
Version TNSLSNR for 32-bit Windows: Version 9.2.0.6.0 - Production
Start Date 05-JAN-2007 17:30:44
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security OFF
SNMP OFF
Listener Parameter File C:\oracle\pmscdevdb\9.2.0\network\admin\PMSCDEV_pmsc_main\listener.ora
Listener Log File c:\oracle\pmscdevdb\9.2.0/network/admin\pmscdev.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCPMSCDEVipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PMSC_Main.PMSC.COM)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PMSCDEV" has 1 instance(s).
Instance "PMSCDEV", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
addlnctl.cmd exiting with status 0
Please refer to the remaining logs on middle tier at - c:\oracle\pmscdevappl\admin\PMSCDEV_pmsc_main\log\01050527.log
Any suggestions to get past this would be appreciated.

1. Make sure the user installing the apps has admin priviledges
2. Create a staging area from the DVD if you can - since you have so much space on your system, then attempt the installation from the staging area. The perl script to use is already on the DVD - adautostg.pl
3. > Connection-specific DNS Suffix: PMSC.COM
     IP Address : 192.168.0.103
and you added
     127.0.0.01 localhost.PMSC.COM, I feel it should have been
     192.168.0.103 localhost.PMSC.COM ( if localhost is your server name. Adding this will nto affect anything)
although I can see from your log file, that the server name is pmsc_main, if so you have to add the servername.domainname.com to the host file too, such as
     192.168.0.103 pmsc_main.pmsc.com.
Essentially, when you ipconfig, it has to return pmsc_main.pmsc.com against the IP address of your server - i.e. 192.168.0.103 and / or 127.0.0.01
Basically, see the following threads:
a. How to Install 11.5.10 on Win XP
b. Oracle EBS 11.5.10.2 Installation Steps
c. http://forums.oracle.com/forums/thread.jspa?threadID=447193&tstart=0
Note: To clean your system of previous installations, see the following if you have metalink -
Note 107961.1 How To Clean Out A Previous Oracle Applications Installation On Windows NT,
however, if you dont have access to metalink, do the labour of deleting every reference to the failed installations on your system and the registry (CAREFUL! if you are up to it)

Oracle E-Business Suite 12.1 Installations fails on windows 7 64 bit

Hi guys,
I am trying since the last 10 days to install Oracle EBS 12.1 on windows 7 64 bit. I have installed the pre-requisites, .i.e:
1. MKS Toolkit 8.7
2. Visual C++ 2005
3. I am installing from the Administrator user Account, which is added to the Administrators Group.
4. After the installation is started all the prerequisite checks are met.
The setup displays the following error on completion of 33% after unzipping all the 237 files:
RW-50004: Error code received when running external process. Check log file for details.
Running Database install Driver for VIS instance
When i checked the log file i found the following error in the logfile 'C:\Program Files (x86)\Oracle\Inventory\logs\cloneActions2011-06-05_02-30-16PM'
INFO: ERROR: File not found: C:\Windows\Microsoft.NET\Framework\v1.1.4322\CONFIG\machine.config
INFO: ERROR: File not found: C:\Windows\Microsoft.NET\Framework\v1.0.3705\CONFIG\machine.config
Please tell me what should i do?
Thanks in Advance.
Regards:
Naik amal Khan
Edited by: Naik Amal Khan on Jun 7, 2011 11:20 PM

Hi Naik;
Windows 7 is certified version for ebs 12.1. I have myself installed it on another system and it is running well. But on this system has some issues.Win7 certified on client tier
Please see:
http://blogs.oracle.com/stevenChan/entry/win7_64-bit_clients_32-bit_browsers_ebs
If you try to make r12.1 installation on win 7, its mean you can try to make installation on uncertified platform.
Please see:
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Microsoft Windows Server (32-bit) [ID 761567.1]
Also check certification matrix which is avaliable at metalink
Regard
Helios

[ReQ] E-Business Suite 11i-Books

hi
any body can help me about E-Business Suite 11i books and sample codes (powerpoint presentations are acceptable.)

http://www.amazon.com/Oracle-Applications-DBA-Field-Guide/dp/1590596447/sr=8-1/qid=1162833794/ref=pd_bbs_sr_1/002-7368919-5852803?ie=UTF8&s=books
search these forums for several good websites.

Oracle E-Business Suite 11.5.10 to 11.5.10.2 upgrade - DBA HELP NEEDED

I hope someone can help me.....I've spent days so far but getting the same issues!
I am trying to setup an E-Business Suite 11i VISION instance to use for some user training.
I have managed to setup and get running 11.5.10 on SUSE 9 and have no problems running this.
However, I am trying to update this to 11.5.10.2 by applying the Cumulative Update (CU2) patch (u3460000.drv).
I have followed all of the pre-requisite steps in Metalink note (316366.1) and applied patches 4318672, 4229931 and 4297568 as per instructions.
All Autoconfig results as part of this returned an [ALL PASS] status and I was then able to proceed.
I then used AutoPatch to apply u3460000.drv, however at a certain point the script displays:
FAILED: file LoadMap.class on worker 1 for product ecx username ECX.
FAILED: file LoadMap.class on worker 2 for product ecx username ECX
ATTENTION: All workers either have failed or are waiting:
FAILED: file LoadMap.class on worker 1.
FAILED: file LoadMap.class on worker 2.
I've checked the worker logs, adwork001.log, adwork002.lo, and can see they are showing an error:
Message: No ECX_VERSION stored in database.
SQLState: null
ErrorCode: 0
I have copied the last few lines from the adwork log file and also adpatch log file to the bottom of this thread.
I have tried using adctrl to restart the failed workers and also the hidden option 8 to skip this process and both of these steps have failed.
I can't see anything about this error on Metalink or Oracle Forums.
ADWORK001 log output
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
AD Java
Version 11.5.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
Time when worker completed job: Mon Apr 16 2012 12:01:25
Evaluating symbolic arguments
Done evaluating symbolic arguments.
Time when worker started job: Mon Apr 16 2012 12:01:25
Start time for file is: Mon Apr 16 2012 12:01:25
adjava -ms128m -mx256m -nojit oracle.apps.ecx.loader.LoadMap &un_apps &pw_apps &jdbc_db_addr &fullpath_igf_patch/115/xml/US_IGF_GR_PELL_OUT.xgm
Reading product information from file...
Reading language and territory information from file
Reading language information from applUS.txt
Temporarily resetting CLASSPATH to:
/d01/oracle/visappl/ad/11.5.0/java/adjri.zip:/d01/oracle/viscomn/util/java/1.4/j2sdk1.4.2_04/lib/tools.jar:/d01/oracle/viscomn/util/java/1.4/j2sdk1.4.2_04/lib/dt.jar:/d01/oracle/viscomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/charsets.jar:/d01/oracle/viscomn/util/java/1.4/j2sdk1.4.2_04/jre/lib/rt.jar:/d01/oracle/viscomn/java/appsborg2.zip:/d01/oracle/visora/8.0.6/forms60/java:/d01/oracle/viscomn/java
Calling /d01/oracle/viscomn/util/java/1.4/j2sdk1.4.2_04/bin/java ...
Spawned Process 8976
Database Connect String (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=EBIZ11I.johndomain)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=VIS)))
UserName APPS
Connecting...
connected.
SQL Stmt: select text from WF_RESOURCES where name = ? and type = ? and language = userenv('LANG')
No ECX_VERSION stored in database.
Could not get ECX_VERSION from Database
SQLException caught
Message: No ECX_VERSION stored in database.
SQLState: null
ErrorCode: 0
Map cound not be loaded, SQLException occured.
Exception in thread "main" java.sql.SQLException: No ECX_VERSION stored in database.
at oracle.apps.ecx.loader.CoreDbServices.getEcxVersionFromDb(CoreDbServices.java:491)
at oracle.apps.ecx.loader.Events.initEvents(Events.java:76)
at oracle.apps.ecx.loader.LoadMap.main(LoadMap.java:85)
AD Run Java Command is complete.
ADPATCH output
There are now 3645 jobs remaining (current phase=A80):
1 running, 87 ready to run and 3557 waiting.
Assigned: file LoadMap.class on worker 2 for product ecx username ECX.
Time is: Mon Apr 16 2012 12:57:44
FAILED: file LoadMap.class on worker 2 for product ecx username ECX.
Time is: Mon Apr 16 2012 12:57:46
FAILED: file LoadMap.class on worker 1 for product ecx username ECX.
Time is: Mon Apr 16 2012 12:57:46
ATTENTION: All workers either have failed or are waiting:
FAILED: file LoadMap.class on worker 1.
FAILED: file LoadMap.class on worker 2.
ATTENTION: Please fix the above failed worker(s) so the manager can continue.
Current time is: Mon Apr 16 2012 12:57:46
It would be amazing if someone could help me with this issue!!
Thanks in advance......

Please see these docs.
FAILED: file LoadMap.class with 'No ECX_VERSION stored in database' [ID 314170.1]
Adpatch Fails while Loading a Map : no ECX_VERSION stored in the database [ID 412445.1]
ADPATCH Fails : LoadMap.class Task error : 'No ECX_VERSION stored in database' [ID 293861.1]
Loading Itgtrade.Ldt fail [ID 317031.1]
Thanks,
Hussein

XLIFF HELP PLEASE URGENT in E-Business Suite.

Hello all. I have been strugling with XLIFF configuration for several days and am under a deadline to get this working.
I have been able to successfully get it working in the development machine under microsoft word. Loading the translation file in word produces the correct results.
I have built a XML Template and loaded the XLIFF file in the E-Business Suite. The translation file gets created in the template and when I click on the preview button under the translation, the xliff file sucessfully loads against the template and I can see the xliff applied successfully.
My issue is when I go to run the report. I create a request, and then when I go under the On Completion section, where the template is shown, there is an option for language and template language.
I do not know how to change these. There is no other options in the lOV to select.
I was testing France French.
I tried to change the Local under Regional settings on my Windows Machine, that did not help.
There are a few other places to change language.
So what I need help is on how do you set the language territory locality so the XML reports selects the correct XLIFF file.
I am not sure where you make the changes to the locality and how it passes this to the XMLP process so it applies the correct xliff file. The documentation is very limiting of this part of the process.
Any help would be appreciated very much.
Ill check back soon to see if anyone can assist.
Thanks in advance.

Also,
I am not sure if MLS is needed or NLS. I am not sure if you need to have these options enabled.
I also found this additional information;
Set Report Locale
A locale is a language and territory combination (for example, English (United States)
or French (Canada)). XML Publisher uses the report locale selection to determine the
following:
• The template translation to apply
• The number formatting and date formatting to apply to the report data
Note that a particular report must have an available template translation for the selected
locale. If not, XML Publisher will apply a locale fallback logic to select the template. For
more information, see Locale Selection Logic, page 4-5.
The appropriate number and date formatting will be applied independently of the
template translation.
Thanks
Ira Kleiner

How can I export oracle e-business suite online help?

hi,dear expert
how can I export oracle e-business suite online help?
I want to view it when I works offline,please help me ,thank you!!
null

I think Oracle Apps Help system is built in to Apps installation and you cant easy enough export it. I have got a few things in mind:
1. You can install Apps on your laptop and by that way make ONLINE Help available offline ;) Online help describes Forms, fields, navigation and really ONLINE things. To me it sounds a bit illogical to have ONLINE help without access to the application.
2. The Apps Doc Set is available on the OTN. You can easy download it for OFFLINE reading. And this documentation is intended for offline reading.
3. Help files for each module located in $APPL_TOP/*/11.5.0/help/US directories. You can try to copy a directory for a module you are interested in on you PC and try to read it offline.
Just my 0.0.2£,
Yury

Please help.. Application Express + Oracle E-Business Suite: Integrated application licensing question

Hi
We are in the process of developing a business application using application express that works more like an extension of Oracle E-Business Suite. Finding an aswer for following question is critical for our small business to move forward with this product development. Request your help please.
Background:
- Our application stored metadata and pl/sql programs in a custom scehema in Oracle E-Busiess Suite.
- We are using Glassfish to host the application express listener to publish/run our application at the moment (development/testing phase)
Our understanding and clarifications needed:
- Our potential client must have an Enterprise level licese on Oracle E-Business Suite in order to allow them to deploy/run our application (3rd party).
- If our potential clients host our application on Oracle HTTP server (from the same box as the Oracle EBS database) then they dont need additional license. Otherwise, they'll have to buy HTTP Server licenses as well?
- What is the best tool (economical and production level performances point of view) to host a 3rd party apex application? Glassfish, Http server, Java standalone?
Please help,
Kind regards
Ebby

Our understanding and clarifications needed:
- Our potential client must have an Enterprise level licese on Oracle E-Business Suite in order to allow them to deploy/run our application (3rd party).
- If our potential clients host our application on Oracle HTTP server (from the same box as the Oracle EBS database) then they dont need additional license. Otherwise, they'll have to buy HTTP Server licenses as well?
- What is the best tool (economical and production level performances point of view) to host a 3rd party apex application? Glassfish, Http server, Java standalone?
You have to contact your local Oracle Sales Representative for Oracle Licensing as no one else can give you right info and also would suggest you to visit
http://www.oracle.com/us/corporate/pricing/price-lists/index.html
thanks

Need help on xml publisher 5.6.2 for E-business suite

Hi,
we are on 5.5.X now, i tried to find a install guide and download patch for 5.6.2 for E-business Suite but could not find any. Can you point me to the right place.
Thanks,
Message was edited by:
tlcal1

Metalink Note: 367394.1 (About Oracle XML Publisher Core Rollup Patch 5.6.2)
Patch 5097966

Error while accessing Oracle E-Business Suite 11i from Linux/firefox

error while accessing Oracle E-Business Suite 11i from Linux/firefox
OS: SUSE Linux Desktop 11(SLED11)
Web browser: firefox 3.x
Java versions:
# rpm -qa |grep java
java-1_6_0-sun-plugin-1.6.0.u18-0.1.1
java-1_6_0-sun-1.6.0.u18-0.1.1
# java -version
java version "1.6.0_18"
Java(TM) SE Runtime Environment (build 1.6.0_18-b07)
Java HotSpot(TM) Server VM (build 16.0-b13, mixed mode)
when I access the url firefox says
"Additional plugins are required to display all the media on this page"
then I clicked on "Install Missing Plugin" button
then I got the following message
No Suitable Plugins were found
Unknown Plugin (application/x-java-applet;jpi-version=1.4.1)
please help/suggest
Regards

Hi user;
Its not certified to login EBS from linux client
Please check:
Linux-cleint (ebs) certification
pluggins
Hope it helps
Regard
Helios

Report won't print to the end of width in Oracle E-Business Suite

Hello all,
I desperately need help to setup Reports 6i layout. I created a report for a 8.3 x 11.69" and it seems fine when I print directly from Reports Developer but when I register it in Oracle E-Business Suite 11.5.10.2 it won't print to the end of page width. It always cut the print in about 3/4 of page width. I already setup the report as a text and pdf but still no success. Enlarge the width and height of the report won't help either. Anyone can suggest something to help? Thanks.

Hi Clamarion,
Login as those users and check the preferences, or you can check the value from the backend (through FND_USER_PREFERENCES table).
About "Applications Start Page" profile option (Doc ID 729375.1)
https://forums.oracle.com/thread/940401
Thanks,
Hussein

Report Builder Question: Printing PO's from E-Business Suite - POXPRPOL

I'm hoping there's someone who has the time to help me: We are using Report Builder 9, Oracle 9i, and E-Business Suite 11.5.10.
I am a new developer using Oracle, and need to make some changes to the seeded (default) POXPRPOL (Purchase Order Print - Landscape) report, using Report Builder.
I have two problems:
1. When I print PO Releases from E-Business Suite, and specify I want releases 1 through 2, I get those fine, but the first page is my "Purchase Agreement". The question is: Is there any way (programatically or otherwise) to say "When the "Release" fields are filled out, don't include the Purchase Agreement?
2. Somehow, after making a few changes to the POXPRPOL report, my quantity has disappeared. Is there any suggestions on how this could happen? I look at the query where they are using "POL.QUANTITY_TO_PRINT" for the working and the non-working reports, and they look identical.
I'm hoping DESPERATELY that someone can help me - I'm really in a bind...
Thanks!
Steve

Srini,
Thanks so much for your reply!!!
1. Ok, but how do I hide a whole page? I noticed the conditional formatting, but I want to "not print" a whole page when this page is a "Purchase Agreement".
2. I've checked the source - it's coming from POL.QUANTITY_TO_PRINT - POL is a view that is unpopulated. I assume it's populated at run-time. So now I am trying to track down where it's populated, but can't find that in report builder. The quantity is being taken into account, because I put a total at the bottom of the page, and that number matches price * pol.quantity_to_print. Very strange...
Finally, here's another question, if you don't mind:
3. When I print a purchase order that is set up as a blanket, as I mentioned before, I get my "Purchase Agreement" first, and then one (or more) pages per release. But the "Page Number" on each is "1" because each is a one-page PO. But my "total pages" is "3", so each page reads "Page 1 of 3". Any idea if there's a way around that?
Thanks again! Hoping you have some more insight! :)
Cheers!
Steve

OEM 12c E-Business Suite Plugin Issue

Hello All,
I am currently new to OEM 12c, and I have the latest version installed and running, Version     12.1.0.2.0. So far everything has been running great, and agents have been downloaded and deployed with little to no issues. However, I am now trying to deploy the E-Business Suite Plug-in to the Management Server first, and I receive an error:
Stop management server
     Failed
     November 1, 2012 2:28:25 PM CDT     November 1, 2012 2:28:40 PM CDT     DeployPluginOnPrimaryOMS     emctl.log
When I look further, I see this in the logs:
Starting Prereq check..
Performing Pre config module
Performing Check required patch
Checking mandatory patches for plugin : oracle.apps.ebs:12.1.0.1.0:0
Performing Pre metadata registration
Performing Pre SQL registration
Registering plugin SQLs. Reg file is /u01/software/Middleware/oms/sysman/admin/emdrep/plugininfo/pluginDepList
Completed Prereq check
Starting Deployment
Invoking pre deploy callbacks.
OMS state could be found. It is up
Stopping OMS.
EM-04001: Server side Plug-in deployment failed with message Error while stopping Management Server on host <company.com>: Unable to stop OMS.. Contact Oracle Support*
EM-04026: Server side Plug-in deployment failed due to previous errors. Check log file /u01/software/Middleware/oms/cfgtoollogs/pluginca/plugindeployment_33/configplugin_all_2012-11-01_14-28-12.log on host <company.com> for more details_*
Performing Opss deconfig
Performing Midtier deconfig
Removing synonyms from EMRUNTIME schema
Removing Plugin's DB objects.
Stopping OMS
Starting OMS
OMS Started successfullyDiagnostic log file: /u01/software/Middleware/oms/cfgtoollogs/pluginca/plugin_deployment_33/configplugin_all_2012-11-01_14-28-12.log
For help type emctl plugin deploy -help
I can't seem to find any helpful info on the errors concerning EM-04001 and EM-04026. I did see that there was a bug fix which was required, bug number 13242773. But reading the ReadMe says this is only for OEM version 12.1.0.1.0.
So, my question is, has anyone run into this problem, or have any suggestions on how to get this plug-in deployed successfully?
Thanks in advance for your help.
Edited by: 969006 on Dec 13, 2012 12:25 PM

Hello,
I haven’t run into the same errors you have reported but, let me share with you our recommended way of installing E-Business Suite Plug-in. Start by referencing our “Getting Start” MOS note 1434392.1it contains all the required patches, certification details, and related documentation. Once you are ready to perform the install start out by reviewing Chapter 2 - Installing the Oracle Application Management Pack for Oracle E-Business Suite of our Oracle Application Management Pack for Oracle E-Business Suite Guide Release 12.1.0.1.0. Here is a direct link -http://docs.oracle.com/cd/E24628_01/doc.121/e28715.pdf
If after following the above steps you are still encountering errors then open a Service Request with Oracle Support.
Regards,
Product Management

Installation of E-Business Suite x86 on Redhat Linux 4 64 bits

Dear Sir/Madam,
I am installing E-Business suite on a 64 bits platform however the environment file has not been created. The following error is appearing. Could you please be of a help.
W-50011: Error: - Database ORACLE_HOME connection test has returned an error: 3
command: su applprd -c "/data/StageR12/startCD/Disk1/rapidwiz/bin/riwTDBup.sh /data/apps12/oracle/VIS/inst/apps/VIS_oracle3/ora/10.1.2/VIS_oracle3.env APPS/APPS"
While checking the environment file on the folder there are other env files not been created.
Database ORACLE_HOME environment file passes instantiated variables test:
File = /data/apps12/oracle/VIS/db/tech_st/10.2.0/VIS_oracle3.env
RW-50016: Error: - Apps ORACLE_HOME environment file was not created:
File = /data/apps12/oracle/VIS/inst/apps/VIS_oracle3/ora/10.1.3/VIS_oracle3.env
RW-50016: Error: - iAS ORACLE_HOME environment file was not created:
File = /data/apps12/oracle/VIS/inst/apps/VIS_oracle3/ora/10.1.2/VIS_oracle3.env
RW-50016: Error: - APPL_TOP environment file was not created:
File = /data/apps12/oracle/VIS/apps/apps_st/appl/VIS_oracle3.env
ADOVARS environment file passes instantiated variables test:
File = /data/apps12/oracle/VIS/apps/apps_st/appl/admin/adovars.env
APPSCONFIG passes instantiated variables test:
File = /data/apps12/oracle/VIS/apps/apps_st/appl/admin/adconfig.txt
Regards
Stéphane

Hi,
How did you resolve this error:
W-50011: Error: - Database ORACLE_HOME connection test has returned an error: 3
command: su applprd -c "/data/StageR12/startCD/Disk1/rapidwiz/bin/riwTDBup.sh /data/apps12/oracle/VIS/inst/apps/VIS_oracle3/ora/10.1.2/VIS_oracle3.env APPS/APPS"
While checking the environment file on the folder there are other env files not been created.
Database ORACLE_HOME environment file passes instantiated variables test:
File = /data/apps12/oracle/VIS/db/tech_st/10.2.0/VIS_oracle3.env
RW-50016: Error: - Apps ORACLE_HOME environment file was not created:
File = /data/apps12/oracle/VIS/inst/apps/VIS_oracle3/ora/10.1.3/VIS_oracle3.env
RW-50016: Error: - iAS ORACLE_HOME environment file was not created:
File = /data/apps12/oracle/VIS/inst/apps/VIS_oracle3/ora/10.1.2/VIS_oracle3.env
RW-50016: Error: - APPL_TOP environment file was not created:
File = /data/apps12/oracle/VIS/apps/apps_st/appl/VIS_oracle3.env
ADOVARS environment file passes instantiated variables test:
File = /data/apps12/oracle/VIS/apps/apps_st/appl/admin/adovars.env
APPSCONFIG passes instantiated variables test:
File = /data/apps12/oracle/VIS/apps/apps_st/appl/admin/adconfig.txt
Thanks,
Naveen
[email protected]

Issue with Integrating E-Business suite with Oracle Webcache server

Hi
I am trying to configure webcache to E- Business Suite.
Webcache sits on some other server, and configured both the sides means webcache server side as well as E-Business side.
Now issues is i am trying to access E-Business suite via webcache server i am getting Jsp pages as well OA Frame work pages but i could not able to open forms from function click.
Here when we are trying to launch forms from function click we are getting nothing
At that time i hope this will hit FND_ICX_LAUNCH.runforms for launcing the forms.Here is the problem i guess, we are not getting any
pl/sql pages(modplsql).
I have tried with URL http://CITRIXPS02.ashokleyland.com:7777/pls/ but i am getting error
Proxy Error
The proxy server received an invalid response from an upstream server.
The proxy server could not handle the request GET /pls/.
Reason: Document contains no data
if i try to launch forms directly with this URL http://citrixps02.ashokleyland.com:7777/dev60cgi/f60cgi i am getting
Please note Host CITRIXPS02.ashokleyland.com is webcache host
Can anybody help in accessing pl/sql pages from E-Business Suite via webcache server
Please get back to us as early as possible
Regards
Anand.G

Hi,
Thanks for your reply. I need the integration of E-Business suite with OAM , in 10g we have to integrate the E-Business suite with OSSO and the WE need to integrate the OSSO with OAM 10g.
I heard that now we can integrate the E-Business suite with OAM 11g with out OSSO, is it correct ??
If yes please provide the info about this.
Thanks & Regards,
Vaasu.

Help me in e-business Suite R.12 installation on Win XP SP2

Similar Messages

Maybe you are looking for