OEM 12c E-Business Suite Plugin Issue
Hello All,
I am currently new to OEM 12c, and I have the latest version installed and running, Version 12.1.0.2.0. So far everything has been running great, and agents have been downloaded and deployed with little to no issues. However, I am now trying to deploy the E-Business Suite Plug-in to the Management Server first, and I receive an error:
Stop management server
Failed
November 1, 2012 2:28:25 PM CDT November 1, 2012 2:28:40 PM CDT DeployPluginOnPrimaryOMS emctl.log
When I look further, I see this in the logs:
Starting Prereq check..
Performing Pre config module
Performing Check required patch
Checking mandatory patches for plugin : oracle.apps.ebs:12.1.0.1.0:0
Performing Pre metadata registration
Performing Pre SQL registration
Registering plugin SQLs. Reg file is /u01/software/Middleware/oms/sysman/admin/emdrep/plugininfo/pluginDepList
Completed Prereq check
Starting Deployment
Invoking pre deploy callbacks.
OMS state could be found. It is up
Stopping OMS.
EM-04001: Server side Plug-in deployment failed with message Error while stopping Management Server on host <company.com>: Unable to stop OMS.. Contact Oracle Support*
EM-04026: Server side Plug-in deployment failed due to previous errors. Check log file /u01/software/Middleware/oms/cfgtoollogs/pluginca/plugindeployment_33/configplugin_all_2012-11-01_14-28-12.log on host <company.com> for more details_*
Performing Opss deconfig
Performing Midtier deconfig
Removing synonyms from EMRUNTIME schema
Removing Plugin's DB objects.
Stopping OMS
Starting OMS
OMS Started successfullyDiagnostic log file: /u01/software/Middleware/oms/cfgtoollogs/pluginca/plugin_deployment_33/configplugin_all_2012-11-01_14-28-12.log
For help type emctl plugin deploy -help
I can't seem to find any helpful info on the errors concerning EM-04001 and EM-04026. I did see that there was a bug fix which was required, bug number 13242773. But reading the ReadMe says this is only for OEM version 12.1.0.1.0.
So, my question is, has anyone run into this problem, or have any suggestions on how to get this plug-in deployed successfully?
Thanks in advance for your help.
Edited by: 969006 on Dec 13, 2012 12:25 PM
Hello,
I haven’t run into the same errors you have reported but, let me share with you our recommended way of installing E-Business Suite Plug-in. Start by referencing our “Getting Start” MOS note 1434392.1it contains all the required patches, certification details, and related documentation. Once you are ready to perform the install start out by reviewing Chapter 2 - Installing the Oracle Application Management Pack for Oracle E-Business Suite of our Oracle Application Management Pack for Oracle E-Business Suite Guide Release 12.1.0.1.0. Here is a direct link -http://docs.oracle.com/cd/E24628_01/doc.121/e28715.pdf
If after following the above steps you are still encountering errors then open a Service Request with Oracle Support.
Regards,
Product Management
Similar Messages
-
anytime i try to access or click on any submenu on my e-business suite using the crm aplications my java console gives the following errror, please assist me on resolving this issue:
Oracle JInitiator: Version 1.3.1.21
Using JRE version 1.3.1.21-internal Java HotSpot(TM) Client VM
JAR cache enabled
Location: C:\Documents and Settings\Ayodele.Akingbulu\Oracle Jar Cache
Maximum size: 50 MB
Compression level: 0
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
q: hide console
s: dump system properties
t: dump thread list
x: clear classloader cache
0-5: set trace level to <n>
java.io.IOException: Connection failure with 503
at sun.plugin.protocol.jdk12.http.HttpURLConnection.getInputStream(Unknown Source)
at oracle.jre.protocol.jar.HttpUtils.followRedirects(Unknown Source)
at oracle.jre.protocol.jar.JarCache$CachedJarLoader.download(Unknown Source)
at oracle.jre.protocol.jar.JarCache$CachedJarLoader.load(Unknown Source)
at oracle.jre.protocol.jar.JarCache.get(Unknown Source)
at oracle.jre.protocol.jar.CachedJarURLConnection.connect(Unknown Source)
at oracle.jre.protocol.jar.CachedJarURLConnection.getJarFile(Unknown Source)
at sun.misc.URLClassPath$JarLoader.getJarFile(Unknown Source)
at sun.misc.URLClassPath$JarLoader.<init>(Unknown Source)
at sun.misc.URLClassPath$2.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.misc.URLClassPath.getLoader(Unknown Source)
at sun.misc.URLClassPath.getLoader(Unknown Source)
at sun.misc.URLClassPath.getResource(Unknown Source)
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
WARNING: Unable to cache http://crmapp1.gtbplc.com:8000/OA_JAVA/oracle/apps/fnd/jar/fndforms.jar
java.io.IOException: Connection failure with 503
at sun.plugin.protocol.jdk12.http.HttpURLConnection.getInputStream(Unknown Source)
at oracle.jre.protocol.jar.HttpUtils.followRedirects(Unknown Source)
at oracle.jre.protocol.jar.JarCache$CachedJarLoader.download(Unknown Source)
at oracle.jre.protocol.jar.JarCache$CachedJarLoader.load(Unknown Source)
at oracle.jre.protocol.jar.JarCache.get(Unknown Source)
at oracle.jre.protocol.jar.CachedJarURLConnection.connect(Unknown Source)
at oracle.jre.protocol.jar.CachedJarURLConnection.getJarFile(Unknown Source)
at sun.misc.URLClassPath$JarLoader.getJarFile(Unknown Source)
at sun.misc.URLClassPath$JarLoader.<init>(Unknown Source)
at sun.misc.URLClassPath$2.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.misc.URLClassPath.getLoader(Unknown Source)
at sun.misc.URLClassPath.getLoader(Unknown Source)
at sun.misc.URLClassPath.getResource(Unknown Source)
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
WARNING: Unable to cache http://crmapp1.gtbplc.com:8000/OA_JAVA/oracle/apps/fnd/jar/fndformsi18n.jar
java.io.IOException: Connection failure with 503
at sun.plugin.protocol.jdk12.http.HttpURLConnection.getInputStream(Unknown Source)
at oracle.jre.protocol.jar.HttpUtils.followRedirects(Unknown Source)
at oracle.jre.protocol.jar.JarCache$CachedJarLoader.download(Unknown Source)
at oracle.jre.protocol.jar.JarCache$CachedJarLoader.load(Unknown Source)
at oracle.jre.protocol.jar.JarCache.get(Unknown Source)
at oracle.jre.protocol.jar.CachedJarURLConnection.connect(Unknown Source)
at oracle.jre.protocol.jar.CachedJarURLConnection.getJarFile(Unknown Source)
at sun.misc.URLClassPath$JarLoader.getJarFile(Unknown Source)
at sun.misc.URLClassPath$JarLoader.<init>(Unknown Source)
at sun.misc.URLClassPath$2.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.misc.URLClassPath.getLoader(Unknown Source)
at sun.misc.URLClassPath.getLoader(Unknown Source)
at sun.misc.URLClassPath.getResource(Unknown Source)
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
WARNING: Unable to cache http://crmapp1.gtbplc.com:8000/OA_JAVA/oracle/apps/fnd/jar/fndewt.jar
java.io.IOException: Connection failure with 503
at sun.plugin.protocol.jdk12.http.HttpURLConnection.getInputStream(Unknown Source)
at oracle.jre.protocol.jar.HttpUtils.followRedirects(Unknown Source)
at oracle.jre.protocol.jar.JarCache$CachedJarLoader.download(Unknown Source)
at oracle.jre.protocol.jar.JarCache$CachedJarLoader.load(Unknown Source)
at oracle.jre.protocol.jar.JarCache.get(Unknown Source)
at oracle.jre.protocol.jar.CachedJarURLConnection.connect(Unknown Source)
at oracle.jre.protocol.jar.CachedJarURLConnection.getJarFile(Unknown Source)
at sun.misc.URLClassPath$JarLoader.getJarFile(Unknown Source)
at sun.misc.URLClassPath$JarLoader.<init>(Unknown Source)
at sun.misc.URLClassPath$2.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.misc.URLClassPath.getLoader(Unknown Source)
at sun.misc.URLClassPath.getLoader(Unknown Source)
at sun.misc.URLClassPath.getResource(Unknown Source)
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
WARNING: Unable to cache http://crmapp1.gtbplc.com:8000/OA_JAVA/oracle/apps/fnd/jar/fndswing.jar
java.io.IOException: Connection failure with 503
at sun.plugin.protocol.jdk12.http.HttpURLConnection.getInputStream(Unknown Source)
at oracle.jre.protocol.jar.HttpUtils.followRedirects(Unknown Source)
at oracle.jre.protocol.jar.JarCache$CachedJarLoader.download(Unknown Source)
at oracle.jre.protocol.jar.JarCache$CachedJarLoader.load(Unknown Source)
at oracle.jre.protocol.jar.JarCache.get(Unknown Source)
at oracle.jre.protocol.jar.CachedJarURLConnection.connect(Unknown Source)
at oracle.jre.protocol.jar.CachedJarURLConnection.getJarFile(Unknown Source)
at sun.misc.URLClassPath$JarLoader.getJarFile(Unknown Source)
at sun.misc.URLClassPath$JarLoader.<init>(Unknown Source)
at sun.misc.URLClassPath$2.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.misc.URLClassPath.getLoader(Unknown Source)
at sun.misc.URLClassPath.getLoader(Unknown Source)
at sun.misc.URLClassPath.getResource(Unknown Source)
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
WARNING: Unable to cache http://crmapp1.gtbplc.com:8000/OA_JAVA/oracle/apps/fnd/jar/fndbalishare.jar
java.io.IOException: Connection failure with 503
at sun.plugin.protocol.jdk12.http.HttpURLConnection.getInputStream(Unknown Source)
at oracle.jre.protocol.jar.HttpUtils.followRedirects(Unknown Source)
at oracle.jre.protocol.jar.JarCache$CachedJarLoader.download(Unknown Source)
at oracle.jre.protocol.jar.JarCache$CachedJarLoader.load(Unknown Source)
at oracle.jre.protocol.jar.JarCache.get(Unknown Source)
at oracle.jre.protocol.jar.CachedJarURLConnection.connect(Unknown Source)
at oracle.jre.protocol.jar.CachedJarURLConnection.getJarFile(Unknown Source)
at sun.misc.URLClassPath$JarLoader.getJarFile(Unknown Source)
at sun.misc.URLClassPath$JarLoader.<init>(Unknown Source)
at sun.misc.URLClassPath$2.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.misc.URLClassPath.getLoader(Unknown Source)
at sun.misc.URLClassPath.getLoader(Unknown Source)
at sun.misc.URLClassPath.getResource(Unknown Source)
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
WARNING: Unable to cache http://crmapp1.gtbplc.com:8000/OA_JAVA/oracle/apps/fnd/jar/fndaol.jar
java.io.IOException: Connection failure with 503
at sun.plugin.protocol.jdk12.http.HttpURLConnection.getInputStream(Unknown Source)
at oracle.jre.protocol.jar.HttpUtils.followRedirects(Unknown Source)
at oracle.jre.protocol.jar.JarCache$CachedJarLoader.download(Unknown Source)
at oracle.jre.protocol.jar.JarCache$CachedJarLoader.load(Unknown Source)
at oracle.jre.protocol.jar.JarCache.get(Unknown Source)
at oracle.jre.protocol.jar.CachedJarURLConnection.connect(Unknown Source)
at oracle.jre.protocol.jar.CachedJarURLConnection.getJarFile(Unknown Source)
at sun.misc.URLClassPath$JarLoader.getJarFile(Unknown Source)
at sun.misc.URLClassPath$JarLoader.<init>(Unknown Source)
at sun.misc.URLClassPath$2.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.misc.URLClassPath.getLoader(Unknown Source)
at sun.misc.URLClassPath.getLoader(Unknown Source)
at sun.misc.URLClassPath.getResource(Unknown Source)
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
WARNING: Unable to cache http://crmapp1.gtbplc.com:8000/OA_JAVA/oracle/apps/fnd/jar/fndctx.jar
java.io.IOException: Connection failure with 503
at sun.plugin.protocol.jdk12.http.HttpURLConnection.getInputStream(Unknown Source)
at oracle.jre.protocol.jar.HttpUtils.followRedirects(Unknown Source)
at oracle.jre.protocol.jar.JarCache$CachedJarLoader.download(Unknown Source)
at oracle.jre.protocol.jar.JarCache$CachedJarLoader.load(Unknown Source)
at oracle.jre.protocol.jar.JarCache.get(Unknown Source)
at oracle.jre.protocol.jar.CachedJarURLConnection.connect(Unknown Source)
at oracle.jre.protocol.jar.CachedJarURLConnection.getJarFile(Unknown Source)
at sun.misc.URLClassPath$JarLoader.getJarFile(Unknown Source)
at sun.misc.URLClassPath$JarLoader.<init>(Unknown Source)
at sun.misc.URLClassPath$2.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.misc.URLClassPath.getLoader(Unknown Source)
at sun.misc.URLClassPath.getLoader(Unknown Source)
at sun.misc.URLClassPath.getResource(Unknown Source)
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
WARNING: Unable to cache http://crmapp1.gtbplc.com:8000/OA_JAVA/oracle/apps/fnd/jar/fndlist.jar
load: class oracle/apps/fnd/formsClient/FormsLauncher.class not found.
java.lang.ClassNotFoundException: java.io.IOException: open HTTP connection failed.
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
load: class oracle/apps/fnd/formsClient/FormsLauncher.class not found.
java.lang.ClassNotFoundException: java.io.IOException: open HTTP connection failed.
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Kindly assist me in resolving this issue thank you all.Again, this is something with the proxy settings :)
Did you disable proxy or add the application URL to the servers list exceptions?
Did you clear your Jcache folder?
For more details, please review Note: 291698.1 - FormsLauncher.class Not Found Error When Attempting to Access Forms in Applications
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=291698.1
Thanks for your kind words, it is appreciated :) -
Dear All,
In windows 2003 server we got E-Business Suite on Oracle Rac, Now i'm trying to clone Application & Database for Development use.. in prerequisite steps i need to run Adpreclone, first with the DB Tier i completed successfully, when comes to Application Tier i'm getting this issue:
Perl lib version (v5.6.1) doesn't match executable version (v5.10.0) at D:\oracl
e\PROD\apps\tech_st\10.1.2\perl\5.6.1\lib\MSWin32-x86/Config.pm line 21.
Compilation failed in require at adpreclone.pl line 35.
BEGIN failed--compilation aborted at adpreclone.pl line 35.
as the issue say's i got 2 version's of perl, But the thing is when i check in path i can only find Perl lib version (v5.6.1).. where the hell this version (v5.10.0) came from...? i even set PERL5LIB Path to version (v5.6.1).. still no use when i run perl adpreclone.pl same error shows...
I think you people can understand what my problem is, if you guys need something else please let me know
With Regards,
BabuHi,
Can you set the perl for v5.10.0 as:
set PERL5LIB=<ORACLE_HOME>\perl\lib\5.10.0;<ORACLE_HOME>\perl\site_perl\5.10.0;<ORACLE_HOME>\appsutil\perl
Please ensure to correctly define this to you perl v5.10.0 version
Hope this help!
Regards -
We are running 11.5.10.2 on OEL 4, with a 9.2.0.6 database.
During a recent recovery operation, we had to forcefully start the database (using allowresetlogs_corruption parameter).
Following this , we are now recreating the database as recommended. For this we are using 9i Export/Import Process for Oracle Applications Release 11i [ID 230627.1] procedure.
Having followed the steps upto the import (except for recreation of new home - we are using same oracle home), import is not completing successfully. The process continues endlessly, until cancelled, with numerous warnings. Some of the errors include:
IMP-00061: Warning: Object type "APPS"."ICXUI_API_BUTTON_LIST" already exists with a different identifier or
IMP-00003: ORACLE error 2264 encountered
ORA-02264: name already used by an existing constraint
Has anyone had this issue? Or if anyone has any pointers to help, would appreciate it.
ThanksHi Hussein,
I tried re-importing into a newly created database.
The log shows rows being imported into the various schema's.
However, I am also seeing the following errors for various objects:
IMP-00015: following statement failed because the object already exists:
"CREATE PUBLIC SYNONYM "GENINCLUDEDDEPENDENCYBLOCKSTRU" FOR "SYS"."GENINCLUD"
"EDDEPENDENCYBLOCKSTRU""
IMP-00019: row rejected due to ORACLE error 1
IMP-00003: ORACLE error 1 encountered
ORA-00001: unique constraint (SYSTEM.REPCAT$_OBJECT_TYPE_PK) violated
and also:
IMP-00041: Warning: object created with compilation warnings
"CREATE FORCE VIEW "APPS"."QP_PREQ_LDETS_TMP".
Also, the import continues for a very long time - more than 14 hours, while the export took about 3.5 hrs.
Not sure what could be wrong- any pointers?
Thanks -
Plugin Fails to install to remote host OEM 12c R2
I am trying to get a couple of plugins to deploy to some remote hosts, but they are failing. I did the initial agent install to the servers with no problems. Now I am trying to add the Oracle Database plugin, and the E-Business Suite Plugin now. I have successfully done this before on another OEM install. Here is the output log I see:
Calling the validateRuntimeParameters method
PluginDeployonAgt: Plugin Deploy on Agent : validated parameters
The target_guid is CB189EA727EA205C077F7FC2F853287B.propName : OracleHome
propName : AgentState
PluginDeployonAgt
Plugin Deploy on Agent - oraHome /u01/app/Agent12c/core/12.1.0.2.0
PluginDeployonAgt - emStateDir /u01/app/Agent12c/agent_inst
The plugin details are :
Agent url oracle.apps.ebs
pluginId 12.1.0.1.0
pluginVersion 0
pluginRevision DISCOVERY
pluginType {4}
action {5}
operCode {6}
errorCode {7}
errorMsg {8}
The exception has occured java.security.PrivilegedActionException: oracle.sysman.emSDK.agent.client.exception.AccessPrivilegeException: (oracle.sysman.gcagent.oms.AsAgentPermission putFile)
The plugin details are :
Agent url oracle.apps.ebs
pluginId 12.1.0.1.0
pluginVersion 0
pluginRevision AGENT
pluginType {4}
action {5}
operCode {6}
errorCode {7}
errorMsg {8}
The exception has occured java.security.PrivilegedActionException: oracle.sysman.emSDK.agent.client.exception.AccessPrivilegeException: (oracle.sysman.gcagent.oms.AsAgentPermission putFile)
The exit code is -1
I have tried resynchronizing, stop/start agents, stop/start OEM, and went as far as rebooting the OEM server. I have not tried removing the host, and agent, then trying to reinstall it.
Any thoughts, suggestions? Thanks in advance.Hi,
I have the same problem when i try to deploy patch 16466443 on remote agent via Plan.
Step: GetHomePatchMap Error
PatchList : 16466443
TargetName : ------:3872
[Apr 28, 2013 6:04:22 PM] Command Arguments:
/oracle/agent12cr2/core/12.1.0.2.0/OPatch/opatch checkComponents -phbasedir /u01/distr/16466443/16466443 -oh /oracle/agent12cr2/core/12.1.0.2.0 -invPtrloc /oracle/agent12cr2/core/12.1.0.2.0/oraInst.loc
[Apr 28, 2013 6:04:22 PM] java.security.PrivilegedActionException: oracle.sysman.emSDK.agent.client.exception.AccessPrivilegeException: (oracle.sysman.gcagent.oms.AsAgentPermission performOperation)
[Apr 28, 2013 6:04:22 PM] Unexpected Exception: null
on the server, this command works correctly:
oracle@xxx $ /oracle/agent12cr2/core/12.1.0.2.0/OPatch/opatch checkComponents -phbasedir /u01/distr/16466443/16466443 -oh /oracle/agent12cr2/core/12.1.0.2.0 -invPtrloc /oracle/agent12cr2/core/12.1.0.2.0/oraInst.loc
Oracle Interim Patch Installer version 11.1.0.9.10
Copyright (c) 2012, Oracle Corporation. All rights reserved.
Oracle Home : /oracle/agent12cr2/core/12.1.0.2.0
Central Inventory : /oracle/oraInventory
from : /oracle/agent12cr2/core/12.1.0.2.0/oraInst.loc
OPatch version : 11.1.0.9.10
OUI version : 11.1.0.9.0
Log file location : /oracle/agent12cr2/core/12.1.0.2.0/cfgtoollogs/opatch/opatch2013-04-28_19-02-03PM_1.log
Invoking utility "checkcomponents"
The input patch(es) "[16466443]" can be applied to the following homes (1):
/oracle/agent12cr2/core/12.1.0.2.0
The input patch(es) "[16466443]" can be applied to the passed homes by the following command(s):
/oracle/agent12cr2/core/12.1.0.2.0/OPatch/opatch napply /u01/distr/16466443/16466443 -oh /oracle/agent12cr2/core/12.1.0.2.0 -invptrLoc /oracle/agent12cr2/core/12.1.0.2.0/oraInst.loc
OPatch command 'checkComponents' done.
OPatch succeeded.
The error occurs when I try to put any patch on the agent through the Plan
somebody decided this issue?
Edited by: 999966 on 28.04.2013 7:02 -
Issue with Integrating E-Business suite with Oracle Webcache server
Hi
I am trying to configure webcache to E- Business Suite.
Webcache sits on some other server, and configured both the sides means webcache server side as well as E-Business side.
Now issues is i am trying to access E-Business suite via webcache server i am getting Jsp pages as well OA Frame work pages but i could not able to open forms from function click.
Here when we are trying to launch forms from function click we are getting nothing
At that time i hope this will hit FND_ICX_LAUNCH.runforms for launcing the forms.Here is the problem i guess, we are not getting any
pl/sql pages(modplsql).
I have tried with URL http://CITRIXPS02.ashokleyland.com:7777/pls/ but i am getting error
Proxy Error
The proxy server received an invalid response from an upstream server.
The proxy server could not handle the request GET /pls/.
Reason: Document contains no data
if i try to launch forms directly with this URL http://citrixps02.ashokleyland.com:7777/dev60cgi/f60cgi i am getting
Please note Host CITRIXPS02.ashokleyland.com is webcache host
Can anybody help in accessing pl/sql pages from E-Business Suite via webcache server
Please get back to us as early as possible
Regards
Anand.GHi,
Thanks for your reply. I need the integration of E-Business suite with OAM , in 10g we have to integrate the E-Business suite with OSSO and the WE need to integrate the OSSO with OAM 10g.
I heard that now we can integrate the E-Business suite with OAM 11g with out OSSO, is it correct ??
If yes please provide the info about this.
Thanks & Regards,
Vaasu. -
Login issue to E-business suite from desktop
Hi All,
I have installed oracle ebs 11.5.10.2 on a linux x86 machine and started the application. I tested the application by entering the url http://apps.test.com:8005
and I am able to login using my user id and password.
While the above is working good, I went to my laptop and tried the same url, but the browser doesn't open the login page. How can I fix this issue?
my desktop domain is cfl.rr.com. Does this cause any issue?
Thanks and Regards,
Badri.Hi Badri;
I have installed oracle ebs 11.5.10.2 on a linux x86 machine and started the application. I tested the application by entering the url http://apps.test.com:8005
and I am able to login using my user id and password.
While the above is working good, I went to my laptop and tried the same url, but the browser doesn't open the login page. How can I fix this issue?
my desktop domain is cfl.rr.com. Does this cause any issue?You try to login from windows client right? If answer yes what is your windows OS?(xp-vista etc) I assume you are using Xp then, you have to follow those steps:
1. Add your http://apps.test.com:8005 to your trusted site
2. Go to C:\WINDOWS\system32\drivers\etc and edit your hosts file , add your site information there like:
10.x.x.x apps.test.com
3. Be sure you use certifed browser, please check:
Recommended Browsers for Oracle E-Business Suite 11i Doc ID: 285218.1
4. If possible close windows firewall
And retest issue
Hope it helps
Regard
Helios -
What are your top 10 issues to upgrade E-Business Suite
Hi everyone,
My name is Max Arderius, Product Manager for Life Cycle Management products in Oracle. We are doing a big effort to help customers to simplify their E-Business Suite upgrade. We are trying to collect all the information we can to identify the top issues that customers are facing before, during or after E-Business Suite upgrades. We are really committed to address all possible issues and so we can prevent usual problems, showstoppers, inconveniences, lack of documentation and other technical difficulties.
What would you say are your top 10 issues that faced to upgrade to R12? Or what would you like Oracle to address in the near future to make your life easier?
I am looking forward for your postings! Thanks!
MaxHi Max ! Hope you are well :-)
One thing that I assume most folks would find useful is a pre-upgrade script that can do some basic checks to identify any potential issues that need to be addressed before the upgrade starts.
A simple example is documented in MOS Doc 802515.1 (R12 Upgrade: Workers Fail In Apstca01.Sql) - the profile option in our system was set to NULL (the default) and the apstca01.sql failed in the middle of the first test upgrade - not a big issue, but would have been nice to have this corrected before the upgrade.
I am sure that are hundreds of such "gotchas" from all the various modules :-)
This script is almost analogous to the database pre-upgrade script/tool (http://download.oracle.com/docs/cd/E11882_01/server.112/e17222/upgrade.htm#UPGRD12395) that performs some checks and makes recommendations.
Thanks
Srini -
Hello Everyone,
I would like to start a discussion on the OEM 12c see if anyone has used for SOA Suite 10g. We are currently running on Oracle SOA Suite 10.1.3.5 we want to make use of OEM 12c for monitoring and perform administration activities. I have gone through some Oracle documents for OEM 12c,I found it's supported up to 10.1.3.4.However I am not so sure so I just wanted to clarify on this.
Can we install the client in Oracle Application Server/SOA OC4J container to perform any administration task,purging,patching,monitor interfaces etc.
I look forward to your valuable input and feedback on the discussion.
Best Regards,Hi,
The zip p6511843_101330_Generic.zip contains a README.txt which explains the steps to be followed to apply this patch.
In the README.txt
Refer to Section2 point No.1.
Get the latest Opatch from metalink for bug 2617419.[this zip will contain a Opatch Directory].Extract this zip into your Oracle SOA home.[ex: C:/product/101.3.1/OracleAS_1]
Also make sure that the Opatch directory in set in the path.
Since we are running this Opatch on a Basic SOA installtion , you don't have to execute the changeNamesWindows.pl script[make sure that you have installed Basic version of SOA and not the Advanced].
This patch will not work on Advanced Install.
You can directly excute
opatch apply.
Follow the remaining steps mentioned in README.txt.
Thanks
Hot-Plug Team -
Given:
E-Business Suite R12.1 running against non-RAC database release 11gR2
Aspiration:
E-Business Suite R12.1 running against database release 12c RAC on Exadata
In the context of Oracle best practices, what would be a preferred approach for the database tier to meet the above aspiration, i.e. (a) Upgrade database on source and then migrate to Exadata OR (b) Migrate database to Exadata and then upgrade ?
Appreciate thoughts from community members/Oracle support.
Thanks,
RakeshRakesh,
It is necessary to refine Srini's statement:
EBS does not need to be "certified" on Exadata. See:
Running E-Business Suite on Exadata V2
https://blogs.oracle.com/stevenChan/entry/e-business_suite_exadata_v2
E-Business Suite 11i, 12.0, and 12.1 are certified with Database 12.1.0.1.
E-Business Suite 12.2 will be certified with Database 12.1.0.1 soon.
Regards,
Steven Chan
Applications Technology Group Development -
ATS load testing for E-Business Suite using IE8 issue
Hi,
I am trying to record a load testing script using Oracle Application testing SUite for E-Business Suite R12.1.3 application. When I start recording I get a pop up asking me to change/disable XSS filter in IE8. I have altready done that and restarted the browser. But the same pop up message comes up.
My queries are:
1) Is ATS 9.3 supported for use with Internet Explorer 8? I am using Windows 7
2) How can I overcome this issue so that I can records EBS script in openscript.
I have run the runDiagnosis.bat file under openscript install folder and the output is as follows:
10:40:17,892 INFO [Application] Log files stored in: C:\OracleATS\logs\odt
10:40:17,905 INFO [DiagnosisExecutor] Starting diagnosis...
10:40:17,908 INFO [DiagnosisExecutor] Log files for all diagnosis categories are stored in: "C:\OracleATS\logs\odt"
10:40:18,105 INFO [DiagnosisExecutor] Environment Info - Date Tue Oct 11 10:40:17 BST 2011
Windows Vista 6.1 , x86
OpenScript
Internet Explorer 8.0.7600.16385
FireFox 7.0.1
10:40:18,108 INFO [DiagnosisExecutor] Openscript install directory: C:\OracleATS\openScript
10:40:18,117 DEBUG [DiagnosisExecutor] Diagnosing Oracle EBS/Forms Functional Testing - Forms FT Diagnoser
10:40:18,532 ERROR [Forms FT Diagnoser] JInitiator was not found on the system.
10:40:18,537 INFO [Installer] JRE option cache is available: false
10:40:18,541 ERROR [Installer] Failed to backup JRE options! FormsFT helper installation will continue...
java.io.FileNotFoundException: C:\Users\Rian\AppData\Roaming\Sun\Java\Deployment\deployment.properties (The system cannot find the path specified)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at oracle.oats.scripting.modules.forms.common.utility.FileUtility.copyFile(FileUtility.java:26)
at oracle.oats.scripting.modules.forms.common.helperInstaller.Installer.installJREPatchImpl(Installer.java:119)
at oracle.oats.scripting.modules.forms.common.helperInstaller.Installer.installJREPatch(Installer.java:105)
at oracle.oats.scripting.modules.forms.common.helperInstaller.WindowsInstaller.installJREPatch(WindowsInstaller.java:68)
at oracle.oats.scripting.modules.forms.common.helperInstaller.Installer.doInstall(Installer.java:75)
at oracle.oats.scripting.modules.formsFT.common.api.internal.helperInstaller.InstallerManager.doInstall(InstallerManager.java:130)
at oracle.oats.scripting.modules.formsFT.diagnosis.FormsFTDiagnoser.checkFormFTHelperInstallation(FormsFTDiagnoser.java:141)
at oracle.oats.scripting.modules.formsFT.diagnosis.FormsFTDiagnoser.diagnose(FormsFTDiagnoser.java:50)
at oracle.oats.scripting.diagnosisTool.api.DiagnosisExecutor.diagnose(DiagnosisExecutor.java:146)
at oracle.oats.scripting.diagnosisTool.api.DiagnosisExecutor.diagnose(DiagnosisExecutor.java:90)
at oracle.oats.scripting.diagnosisTool.Application.runSilently(Application.java:191)
at oracle.oats.scripting.diagnosisTool.Application.run(Application.java:90)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.eclipse.equinox.internal.app.EclipseAppContainer.callMethodWithException(EclipseAppContainer.java:574)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:195)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:386)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:549)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:504)
at org.eclipse.equinox.launcher.Main.run(Main.java:1236)
at org.eclipse.equinox.launcher.Main.main(Main.java:1212)
at org.eclipse.core.launcher.Main.main(Main.java:30)
10:40:22,867 WARN [Installer] FormsFT Helper is installed without cache
java.io.FileNotFoundException: C:\Users\Rian\AppData\Roaming\Sun\Java\Deployment\deployment.properties (The system cannot find the path specified)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(FileInputStream.java:106)
at oracle.oats.scripting.modules.forms.common.utility.FileUtility.copyFile(FileUtility.java:26)
at oracle.oats.scripting.modules.forms.common.helperInstaller.Installer.installJREPatchImpl(Installer.java:193)
at oracle.oats.scripting.modules.forms.common.helperInstaller.Installer.installJREPatch(Installer.java:105)
at oracle.oats.scripting.modules.forms.common.helperInstaller.WindowsInstaller.installJREPatch(WindowsInstaller.java:68)
at oracle.oats.scripting.modules.forms.common.helperInstaller.Installer.doInstall(Installer.java:75)
at oracle.oats.scripting.modules.formsFT.common.api.internal.helperInstaller.InstallerManager.doInstall(InstallerManager.java:130)
at oracle.oats.scripting.modules.formsFT.diagnosis.FormsFTDiagnoser.checkFormFTHelperInstallation(FormsFTDiagnoser.java:141)
at oracle.oats.scripting.modules.formsFT.diagnosis.FormsFTDiagnoser.diagnose(FormsFTDiagnoser.java:50)
at oracle.oats.scripting.diagnosisTool.api.DiagnosisExecutor.diagnose(DiagnosisExecutor.java:146)
at oracle.oats.scripting.diagnosisTool.api.DiagnosisExecutor.diagnose(DiagnosisExecutor.java:90)
at oracle.oats.scripting.diagnosisTool.Application.runSilently(Application.java:191)
at oracle.oats.scripting.diagnosisTool.Application.run(Application.java:90)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.eclipse.equinox.internal.app.EclipseAppContainer.callMethodWithException(EclipseAppContainer.java:574)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:195)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:386)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:549)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:504)
at org.eclipse.equinox.launcher.Main.run(Main.java:1236)
at org.eclipse.equinox.launcher.Main.main(Main.java:1212)
at org.eclipse.core.launcher.Main.main(Main.java:30)
10:40:22,936 INFO [Installer] JRE option cache is available: false
10:40:24,044 DEBUG [DiagnosisExecutor] Diagnosed Oracle EBS/Forms Functional Testing - Forms FT Diagnoser. Analyzing results.
10:40:24,063 DEBUG [DiagnosisExecutor] Diagnosing Sun JRE Version 1.6.0_24
10:40:24,077 DEBUG [DiagnosisExecutor] Diagnosing Forms FT Helper Installation
10:40:24,080 DEBUG [DiagnosisExecutor] Diagnosing Web Functional Testing - IE Helper
10:40:24,238 INFO [IEBhoUtil] DotNet Framework found. Version is 4.0.30319
10:40:24,404 INFO [RunCommand] [Cmd execute] cmd.exe /C C:\Windows\Microsoft.NET\Framework\v4.0.30319\regasm.exe
10:40:26,187 INFO [IEBhoUtil] DotNet Framework works well.
10:40:26,318 INFO [IEBhoUtil] OpenScript IE Toolbar/BHO is found.
10:40:26,458 INFO [RunCommand] [Cmd execute] cmd.exe /C "C:\OracleATS\openScript\Oracle IE ToolBar\OpenScriptToolBar.exe"
10:40:27,357 ERROR [IEBhoUtil] Run Oracle IE Toolbar error:Attempted to perform an unauthorized operation.
10:40:27,594 INFO [IEBhoUtil] IE Enhanced Security Administrator Setting: null
10:40:27,675 INFO [IEBhoUtil] IE Enhanced Security Users Setting: null
10:40:27,677 INFO [IEBhoUtil] IE Enhanced Security Settings Disabled
10:40:27,681 DEBUG [DiagnosisExecutor] Diagnosed Web Functional Testing - IE Helper. Analyzing results.
10:40:27,683 DEBUG [DiagnosisExecutor] Diagnosing .NET Framework
10:40:27,685 DEBUG [DiagnosisExecutor] Diagnosing IE Helper Installation
10:40:27,686 DEBUG [DiagnosisExecutor] Diagnosing IE Helper Accessibility
10:40:27,687 ERROR [DiagnosisExecutor] Failure found when diagnosing Web Functional Testing IE Helper
10:40:27,689 DEBUG [DiagnosisExecutor] Trying to fix IE Helper Accessibility
10:40:27,691 INFO [IE Helper] Try to fix an issue: IE Helper Accessibility
10:40:27,860 INFO [IEBhoUtil] OpenScript IE BHO/Toolbar has been enabled.
10:40:27,864 INFO [DiagnosisExecutor] Auto-fixed IE Helper Accessibility
10:40:27,866 DEBUG [DiagnosisExecutor] Diagnosing IE Helper Conflict
10:40:27,869 DEBUG [DiagnosisExecutor] Diagnosing IE Zoom Factor
10:40:27,871 DEBUG [DiagnosisExecutor] Diagnosing IE Enhanced Security Setting
10:40:27,982 DEBUG [DiagnosisExecutor] Diagnosing Web Functional Testing - Firefox Helper
10:40:28,076 INFO [FFExtUtil] OpenScript WebDom Firefox extension is already installed.
10:40:28,156 INFO [FFExtUtil] OpenScript WebDom Add-on is compatible with the installed Firefox 7.0.1
10:40:28,174 INFO [FFExtUtil] Firefox profiles are found.
10:40:28,179 INFO [FFExtUtil] Firefox profiles are found.
10:40:28,182 DEBUG [DiagnosisExecutor] Diagnosed Web Functional Testing - Firefox Helper. Analyzing results.
10:40:28,191 DEBUG [DiagnosisExecutor] Diagnosing Firefox Helper Installation
10:40:28,193 DEBUG [DiagnosisExecutor] Diagnosing Firefox Version
10:40:28,199 DEBUG [DiagnosisExecutor] Diagnosing Firefox Helper Accessibility
10:40:28,201 DEBUG [DiagnosisExecutor] Diagnosing Reset Firefox content preferences.
10:40:28,207 DEBUG [DiagnosisExecutor] Diagnosing Operating System - WebDom Platform Diagnosor
10:40:30,798 DEBUG [DiagnosisExecutor] Diagnosed Operating System - WebDom Platform Diagnosor. Analyzing results.
10:40:30,801 DEBUG [DiagnosisExecutor] Diagnosing Environment Variables
10:40:30,803 DEBUG [DiagnosisExecutor] Diagnosing IE Toolbar/BHO Remover
10:40:30,806 DEBUG [DiagnosisExecutor] Diagnosing Oracle EBS/Forms Load Testing - Forms LT Diagnoser
10:40:31,647 DEBUG [Forms LT Diagnoser] Proxy settings for Sun Java 1.5 and higher are set correctly to "Use Browser Settings". Proxy settings for older versions of Sun Java and JInitiator should be manually verified.
10:40:31,650 DEBUG [DiagnosisExecutor] Diagnosed Oracle EBS/Forms Load Testing - Forms LT Diagnoser. Analyzing results.
10:40:31,654 DEBUG [DiagnosisExecutor] Diagnosing IE8 XSS Security Settings
10:40:31,655 ERROR [DiagnosisExecutor] Failure found when diagnosing Oracle EBS/Forms Load Testing Forms LT Diagnoser
10:40:31,659 DEBUG [DiagnosisExecutor] Trying to fix IE8 XSS Security Settings
10:40:31,671 ERROR [DiagnosisExecutor] Did not auto-fix the problem.
10:40:31,674 ERROR [DiagnosisExecutor] Suggestion for fixing: Local intranet: XSS Filter is disabled
Trusted sites: XSS Filter is enabled
Internet: XSS Filter is disabled
Restricted sites: XSS Filter is enabled
To Change setting:
Go to Tools > Internet Options and Choose Security Tab
Select the Zone to modify and Press Custom level
Find Enable XSS filter Setting - Select Disable and click Ok
10:40:31,680 DEBUG [DiagnosisExecutor] Diagnosing Sun Java proxy settings
10:40:31,683 DEBUG [DiagnosisExecutor] Diagnosing Helper Service - Helper Service
10:40:32,282 DEBUG [DiagnosisExecutor] Diagnosed Helper Service - Helper Service. Analyzing results.
10:40:32,284 DEBUG [DiagnosisExecutor] Diagnosing Helper Service Installation
10:40:32,287 DEBUG [DiagnosisExecutor] Diagnosing Helper Service Status
10:40:32,289 DEBUG [DiagnosisExecutor] Diagnosing Helper Service Connection
10:40:32,612 DEBUG [DiagnosisExecutor] No Eclipse configuration .log file available.
10:40:32,774 INFO [DiagnosisExecutor] Diagnosis Complete.
Please advise.
regards
CPHello
1/ ATS 9.3 is supported with IE8, not IE9 at the moment
2/ Did you disable xss settings for the four different security zones?
You can also try to add the EBS url to the trusted sites and disable xss settings for that zone only.
Let us know and good luck
JB -
OEM 12c installer unzip issue for disk3
Hi All ,
After downloading disk3 for OEM 12c installation for 32 bit Linux ,I am not able to unzip the installer .
I have tried download's from edelivery and oracle.com but too no luck.
I have tried extracting this zip on windows it shows as corrupted .Did anyone face this issue OR can any one point me to correct download’s.
Any help will be highly appreciated .
Thanks
AmarkHi,
I am assuming ur are trying to download 12.1.0.2 EM on linux and this can be done from OTN- http://www.oracle.com/technetwork/oem/enterprise-manager/downloads/index.html
What error are you getting when you use unzip ? Also make sure that you use unzip6 version.
I hope you are not trying to extract linux binaries on windows host ?
After downloading binaries from OTN, pls verify the checksum/bytes of the zips as mentioned on the OTN -
After OEM 12c installation, how to install more plugins?
I just finished up installation of oem 12c OMS, but forgot to pickup db2 and sql server db as plugins, how to add those in?
are those plugs ins installed can be used to monitor db2 /sqlserver dbs?You can deploy any plugin post install as well. Read this for instructions : http://docs.oracle.com/cd/E24628_01/doc.121/e24473/plugin_mngr.htm#CHDBGHFE
-
Issue importing Japanese language in E business Suite 12i
Hi All,
I have installed Oracle E Business Suite 12i with Vision Database on Windows 2003 Server 32 bit server. Everything is working fine.
Now, I am trying to add Japanese language to this system. So, I changed the base language from American English to Japanese using License Manager under Oracle Application Manager. Then I ran adadmin tool and maintain the multi language tables. Then I have enabled the maintenance mode using adadmin tool.
Then I ran adpatch utlity to import the Japanese language patch i.e. u4440000.drv. It ran for 2 hours then gave me an error.
Adpatch.log
Time is: Fri May 01 2009 16:54:33
FAILED: file XLIFFLoader.class on worker 3 for product xdo username XDO.
Time is: Fri May 01 2009 16:54:47
FAILED: file XLIFFLoader.class on worker 4 for product xdo username XDO.
Time is: Fri May 01 2009 16:54:53
FAILED: file XLIFFLoader.class on worker 1 for product xdo username XDO.
Time is: Fri May 01 2009 16:54:55
FAILED: file XLIFFLoader.class on worker 2 for product xdo username XDO.
Time is: Fri May 01 2009 16:54:56
ATTENTION: All workers either have failed or are waiting:
FAILED: file XLIFFLoader.class on worker 1.
FAILED: file XLIFFLoader.class on worker 2.
FAILED: file XLIFFLoader.class on worker 3.
FAILED: file XLIFFLoader.class on worker 4.
adwork001.log
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"E:\oracle\VIS\apps\apps_st\appl\ad\12.0.0\java\adjava.zip;E:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\lib\dt.jar;E:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\lib\tools.jar;E:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\jre\lib\rt.jar;E:\oracle\VIS\apps\apps_st\comn\java\lib/appsborg.zip;E:\oracle\VIS\apps\tech_st\10.1.2\forms\java;E:\oracle\VIS\apps\tech_st\10.1.2\forms\java\frmall.jar;E:\oracle\VIS\apps\tech_st\10.1.2/jlib/ewt3.jar;E:\oracle\VIS\apps\tech_st\10.1.2\j2ee\OC4J_BI_Forms\applications\formsapp\formsweb\WEB-INF\lib\frmsrv.jar;E:\oracle\VIS\apps\a"
Calling E:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\jre\bin\java.exe ...
java.lang.NoClassDefFoundError: oracle/apps/xdo/oa/util/XLIFFLoader
Exception in thread "main"
AD Worker error:
The above program failed. See the error messages listed
above, if any, or see the log and output files for the program.
Time when worker failed: Fri May 01 2009 16:50:56
Reading jobs to run from restart file.
Completed reading the to-do restart file. Ready to run jobs.
Restarting job that failed and was fixed.
Time when worker restarted job: Fri May 01 2009 16:54:32
Start time for file is: Fri May 01 2009 16:54:32
adjava -ms128m -mx256m -Xrs -nojit oracle.apps.xdo.oa.util.XLIFFLoader UPLOAD -DB_USERNAME &un_apps -DB_PASSWORD &pw_apps -JDBC_CONNECTION &jdbc_db_addr -APPS_SHORT_NAME ENG -FILE_NAME &fullpath:amw:patch/115/publisher/templates/JA:AMWCRREQSRP.xlf
Error:
Program exited with status 1
Cause: The program terminated, returning status code 1.
I would really apperciated if somebody has solutions or suggestions to this problem.
Thanks.Yes. I have met the same issue as I adpatched the simpled-chinese language in EBS R12.1.1. The follow is log for worker. I can not solve errors with adctrl utility. the patching for language package can not go on. Have you solved this issue and how ?
***THE FOLLOW IS WORKER 2 LOG****
Time when worker started job: Wed Jun 10 2009 07:57:17
Start time for file is: Wed Jun 10 2009 07:57:17
adjava -ms128m -mx256m -Xrs -nojit oracle.apps.xdo.oa.util.XLIFFLoader UPLOAD -DB_USERNAME &un_apps -DB_PASSWORD &pw_apps -JDBC_CONNECTION &jdbc_db_addr -APPS_SHORT_NAME OFA -TEMPLATE_CODE FADTXD -FILE_NAME &fullpath:fa:patch/115/publisher/templates/ZHS:FADTXD.xlf
Error:
Program exited with status 1
Cause: The program terminated, returning status code 1.
Action: Check your installation manual for the meaning of this code on this operating system.
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
AD Java
Version 12.0.0
NOTE: You may not use this utility for custom development
unless you have written permission from Oracle Corporation.
Reading product information from file...
Reading language and territory information from file...
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"D:\oracle\VIS\apps\apps_st\appl\ad\12.0.0\java\adjava.zip;D:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\lib\dt.jar;D:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\lib\tools.jar;D:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\jre\lib\rt.jar;D:\oracle\VIS\apps\apps_st\comn\java\lib/appsborg.zip;D:\oracle\VIS\apps\tech_st\10.1.2\forms\java;D:\oracle\VIS\apps\tech_st\10.1.2\forms\java\frmall.jar;D:\oracle\VIS\apps\tech_st\10.1.2/jlib/ewt3.jar;D:\oracle\VIS\apps\tech_st\10.1.2\j2ee\OC4J_BI_Forms\applications\formsapp\formsweb\WEB-INF\lib\frmsrv.jar;D:\oracle\VIS\apps\apps_st\comn\java\classes"
Calling D:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\jre\bin\java.exe ...
XLIFFLoader started: Wed Jun 10 07:57:18 CST 2009
Parameters passed to XLIFFLoader...
[FILE_NAME] [D:\oracle\VIS\apps\apps_st\appl\fa\12.0.0\patch\115\publisher\templates\ZHS\FADTXD.xlf]
[APPS_SHORT_NAME] [OFA]
[UPLOAD] [UPLOAD]
[DB_USERNAME] [APPS]
[JDBC_CONNECTION] [(DESCRIPTION=(ADDRESS_LIST=(LOAD_BALANCE=YES)(FAILOVER=YES)(ADDRESS=(PROTOCOL=tcp)(HOST=zhjia.tongee.com)(PORT=1521)))(CONNECT_DATA=(SID=VIS)))]
[DB_PASSWORD] [******]
[TEMPLATE_CODE] [FADTXD]
Target file: FADTXD.xlf
Start uploading...
[061009_075721156][][EXCEPTION] java.io.UTFDataFormatException: Invalid UTF8 encoding.
at oracle.xml.parser.v2.XMLUTF8Reader.checkUTF8Byte(XMLUTF8Reader.java:160)
at oracle.xml.parser.v2.XMLUTF8Reader.readUTF8Char(XMLUTF8Reader.java:203)
at oracle.xml.parser.v2.XMLUTF8Reader.fillBuffer(XMLUTF8Reader.java:120)
at oracle.xml.parser.v2.XMLByteReader.saveBuffer(XMLByteReader.java:450)
at oracle.xml.parser.v2.XMLReader.fillBuffer(XMLReader.java:2488)
at oracle.xml.parser.v2.XMLReader.tryRead(XMLReader.java:1089)
at oracle.xml.parser.v2.XMLReader.scanXMLDecl(XMLReader.java:3047)
at oracle.xml.parser.v2.XMLReader.pushXMLReader(XMLReader.java:521)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:288)
at oracle.apps.xdo.oa.util.TemplateTranslator.createMLSTemplates(TemplateTranslator.java:238)
at oracle.apps.xdo.oa.util.XLIFFLoader.processUpload(XLIFFLoader.java:709)
at oracle.apps.xdo.oa.util.XLIFFLoader.process(XLIFFLoader.java:565)
at oracle.apps.xdo.oa.util.XLIFFLoader.main(XLIFFLoader.java:1073)
oracle.apps.xdo.XDOException: Exception while parsing base template
at oracle.apps.xdo.oa.util.TemplateTranslator.createMLSTemplates(TemplateTranslator.java:241)
at oracle.apps.xdo.oa.util.XLIFFLoader.processUpload(XLIFFLoader.java:709)
at oracle.apps.xdo.oa.util.XLIFFLoader.process(XLIFFLoader.java:565)
at oracle.apps.xdo.oa.util.XLIFFLoader.main(XLIFFLoader.java:1073)
AD Worker error:
The above program failed. See the error messages listed
above, if any, or see the log and output files for the program.
Time when worker failed: Wed Jun 10 2009 07:57:22 -
NetApp plugin for OEM 12c - DB is not on NFS mounted storage. DB Storage Perf Report empty
Hi, I have installed NetApp Plugin for OEM 12c (12.1.0.3.1) for a Netapp vFiler used for SMO. "Database Storage Utilization" and "Consolidation Database Storage Performance" empty. "Database is not on NFS mounted storage. Hence, no views available." - a. We are using ASM lun created on NFS. Does this means it will not appear in the plugin report ? - b. If point a. is true, is there a way to make the data appear ? I had already verified the BELOW. Only for point 4, I observed MGMT$DB_DATAFILES."OS_STORAGE_ENTITY" is NA (even though the ASM disk is actually on a NFS mount) : 1. Database discovery is done in EM12c . 2. Go to the database “HOST” target in EM 12c and click on the host target on which database resides. From host target drop down, click on “Host-> StorageDetails”. It will launch the “Storage Details” page. Please refer attached screenshot. There is a table displayed on bottom of screen and click on “File Systems” tab and check that your discovered database storage mount point is shown there. (Please note that whenever you define new mount point on host, this list should reflect the change.), otherwise, Database Performance views will not work. This mount point discovery is updated periodically. (It might be possible that DB views are not working because this discovery might not have finished) 3. Please click on NetApp Storage Target type and go to “Target HomePage drop down ->All Metrics”. Please click on “Volume List” metric and confirm if the volume is listed there on which database resides. 4. If all above steps holds good, please execute the below query on EM 12c repository and send the result: SELECT V2.TARGET_NAME, V1.FILESYSTEM, SUBSTR(V1.FILESYSTEM,INSTR(V1.FILESYSTEM,':')+6, (CASE WHEN (INSTR(V1.FILESYSTEM,'/',1,3) > 0) THEN INSTR(V1.FILESYSTEM,'/',1,3) - INSTR(V1.FILESYSTEM,'/',1,2) - 1 ELSE 100 END)) "VOLUMENAME" FROM MGMT$STORAGE_REPORT_NFS V1, MGMT$DB_DATAFILES V2 WHERE V1.MOUNTPOINT = V2.OS_STORAGE_ENTITY and V2.TARGET_NAME=''
Hi Aik, Change in SQLs will not work. There is lot of code for data discovery.We need to have discovery mechanism integrated in our plug-in for ASM LUNS.ASM LUN based database discovery has been planned to support in future release of plug-ins. Can you please share following details about OEM plug-in usage:1. Company Name2. ONTAP OS (cDOT / 7-mode which version)3. Nature of Databases (Only ASM or NFS based)4. Are your currently using this plug-in for NFS databases? If yes, how it helps to simplify your database administration. We will share your feedback to Product Management for support of ASM. Regards,Sachin Maheshwari
Maybe you are looking for
-
Applying Patch 92021 to Oracle 9201 DB
Hello All; I'm trying to apply the patch 92021 to my DB on windows platform. 1- from Services I stopped all Oracle Services. 2- I installed the patch successfully. 3- Now I want to do the post install tasks. (startup migrate , spool patch.log, @rdbms
-
Multiple SQL Statements in Data Template
If I have more than 1 sql statements in a data template, how can I target them directly? I would like to link directly to a report and don't want to use the default sql statement.
-
Headset too loud and other applications no longer adjust the volume
So I buried out my Speed-Link Medusa 5.1 USB headset and tried it out with Linux. Worked reasonably well, I plugged it in, set the headset as primary sound output with asoundconf as written in the wiki and rebooted. Now I have two problems: a) I had
-
I am using the shared variable engine to bind shared variables to an OPC server (DSC/Labview 8.5) When using read only variables, all works OK When using a read/write variable (specified either R/W or W only in the shared variable definition), the sh
-
How can memory be increased in Windows?
I have a problem with memory. While making many assignments of a certain class I run out of memory (Java.OutOfMemoryException) in Win 98. However with the same program and same amount of assignments I don't run out of memory in Win NT. Is there diffe